U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot-Users] Initially loading uboot into flash on MPC5200
@ 2008-02-09  4:01 Jon Smirl
  2008-02-10 20:02 ` Wolfgang Denk
  0 siblings, 1 reply; 5+ messages in thread
From: Jon Smirl @ 2008-02-09  4:01 UTC (permalink / raw)
  To: u-boot

I'm working on a MPC5200 based design, www.digispeaker.com. What low
cost options are there for initially loading the flash if a BDI2000 is
not in the budget? Ideally we'd like to find something cheap enough
that a hobbyist could buy it if they bricked their board.

Our hardware is not finalized so we can still change things to make
programming the flash easier. I wish the MPC5200 had a way to load RAM
from the serial port like most ARM chips.

There is a trick using the PCI bus that can be used on the MPC5200 but
we don't have a PCI socket.

-- 
Jon Smirl
jonsmirl at gmail.com

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot-Users] Initially loading uboot into flash on MPC5200
  2008-02-09  4:01 [U-Boot-Users] Initially loading uboot into flash on MPC5200 Jon Smirl
@ 2008-02-10 20:02 ` Wolfgang Denk
  2008-02-11 10:29   ` Andreas Schweigstill
  0 siblings, 1 reply; 5+ messages in thread
From: Wolfgang Denk @ 2008-02-10 20:02 UTC (permalink / raw)
  To: u-boot

In message <9e4733910802082001y393bf841u9132528a323f775a@mail.gmail.com> you wrote:
> I'm working on a MPC5200 based design, www.digispeaker.com. What low
> cost options are there for initially loading the flash if a BDI2000 is
> not in the budget? Ideally we'd like to find something cheap enough
> that a hobbyist could buy it if they bricked their board.

I  know  of  one  boad  manufacturer  whoa  uses  an  external  flash
programmer;  he unsolders/reballs/resolders the flash chips to do so.
He claims it works well for him.

> Our hardware is not finalized so we can still change things to make
> programming the flash easier. I wish the MPC5200 had a way to load RAM
> from the serial port like most ARM chips.
> 
> There is a trick using the PCI bus that can be used on the MPC5200 but
> we don't have a PCI socket.

Don't try tricks; go and buy a BDI3000. In the long run, it will trun
out to be the cheapest solution.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Disc space - the final frontier!

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot-Users] Initially loading uboot into flash on MPC5200
  2008-02-10 20:02 ` Wolfgang Denk
@ 2008-02-11 10:29   ` Andreas Schweigstill
  2008-02-11 10:39     ` w.wegner at astro-kom.de
  0 siblings, 1 reply; 5+ messages in thread
From: Andreas Schweigstill @ 2008-02-11 10:29 UTC (permalink / raw)
  To: u-boot

Hello!

Wolfgang Denk schrieb:
> Don't try tricks; go and buy a BDI3000. In the long run, it will trun
> out to be the cheapest solution.

I just heard from a customer that he bought a BDI2000 clone which is
manufactured by an Austrian company and costs a fraction of the original
one from Abatron. I don't know if this clone has restricted features and
if there is also a BDI3000 clone available.

Regards
Andreas Schweigstill

-- 
Dipl.-Phys. Andreas Schweigstill
Schweigstill IT | Embedded Systems
Schauenburgerstra?e 116, D-24118 Kiel, Germany
Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436
Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot-Users] Initially loading uboot into flash on MPC5200
  2008-02-11 10:29   ` Andreas Schweigstill
@ 2008-02-11 10:39     ` w.wegner at astro-kom.de
  2008-02-11 14:38       ` Jon Smirl
  0 siblings, 1 reply; 5+ messages in thread
From: w.wegner at astro-kom.de @ 2008-02-11 10:39 UTC (permalink / raw)
  To: u-boot

Hi,

On 11 Feb 2008 at 11:29, Andreas Schweigstill wrote:

> Hello!
> 
> Wolfgang Denk schrieb:
> > Don't try tricks; go and buy a BDI3000. In the long run, it will trun
> > out to be the cheapest solution.
> 
> I just heard from a customer that he bought a BDI2000 clone which is
> manufactured by an Austrian company and costs a fraction of the original
> one from Abatron. I don't know if this clone has restricted features and
> if there is also a BDI3000 clone available.

maybe you are refering to "PEEDI" made by Ronetix?

I have such a device, and it is working really nice for debugging on BDM.
Cost does vary depending on configuration, though.

There is only one problem left with stand-alone flash programming
with my specific combination (Freescale MCF5373L/Intel P30 Flash),
but I hope we get this worked out, too. Ronetix support is quite
responsive so far.

Best regards,
Wolfgang

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot-Users] Initially loading uboot into flash on MPC5200
  2008-02-11 10:39     ` w.wegner at astro-kom.de
@ 2008-02-11 14:38       ` Jon Smirl
  0 siblings, 0 replies; 5+ messages in thread
From: Jon Smirl @ 2008-02-11 14:38 UTC (permalink / raw)
  To: u-boot

On 2/11/08, w.wegner at astro-kom.de <w.wegner@astro-kom.de> wrote:
> Hi,
>
> On 11 Feb 2008 at 11:29, Andreas Schweigstill wrote:
>
> > Hello!
> >
> > Wolfgang Denk schrieb:
> > > Don't try tricks; go and buy a BDI3000. In the long run, it will trun
> > > out to be the cheapest solution.
> >
> > I just heard from a customer that he bought a BDI2000 clone which is
> > manufactured by an Austrian company and costs a fraction of the original
> > one from Abatron. I don't know if this clone has restricted features and
> > if there is also a BDI3000 clone available.
>
> maybe you are refering to "PEEDI" made by Ronetix?

PEEDI doesn't support MPC5200 according to the web site.

In case anyone is wondering, with a tiny amount of logic you can make
the PCI socket into a local bus socket when the board first boots.
Then put a flash chip onto a PCI form factor card that you programmed
elsewhere. The MPC5200 will run the program from the PCI/local bus
flash card which will get you bootstrapped.

Macraigor USB wiggler supports MPC5200 for $250. But they want another
$500 for the flash programming software.

The BSDL file for the MPC5200 is on the Freescale site. If we have
time we may play with OpenOCD/cheap JTAG and see if we can convince it
to program our flash chip. If we can get that to work it will give us
a $50 solution for a hobbyist to unbrick their device at home.


>
> I have such a device, and it is working really nice for debugging on BDM.
> Cost does vary depending on configuration, though.
>
> There is only one problem left with stand-alone flash programming
> with my specific combination (Freescale MCF5373L/Intel P30 Flash),
> but I hope we get this worked out, too. Ronetix support is quite
> responsive so far.
>
> Best regards,
> Wolfgang
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>


-- 
Jon Smirl
jonsmirl at gmail.com

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2008-02-11 14:38 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-09  4:01 [U-Boot-Users] Initially loading uboot into flash on MPC5200 Jon Smirl
2008-02-10 20:02 ` Wolfgang Denk
2008-02-11 10:29   ` Andreas Schweigstill
2008-02-11 10:39     ` w.wegner at astro-kom.de
2008-02-11 14:38       ` Jon Smirl

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox