public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] mpc8315 DDR2 controller
@ 2009-08-25 20:51 Marcos Cunha
  2009-08-25 22:11 ` Wolfgang Denk
  0 siblings, 1 reply; 3+ messages in thread
From: Marcos Cunha @ 2009-08-25 20:51 UTC (permalink / raw)
  To: u-boot

Dears,

I am using u-boot 1.2.0 for mpc8315e processor with BDI2000 debugger in 
a new design based on MPC8315ERDB.  Our board has a different DDR2 and 
Flash memory. The flash memory works fine. The problem could be DDR2.

We are using Samsung K4T1G164QE DDR2 Memory.  I can read/write DDR2 
memory with BDI2000, but I have problems when u-boot try to write the 
first information in DDR2 memory (lib_ppc/board.c line 493 => *s-- = 0). 
After that, the program does not work.

There is a breakpoint in this line. After the breakpoint accours, I do a 
step command and I receive this message from gdb:

Program received signal SIGSTOP, Stopped (signal).
0x00001200 in ?? ()

It could be a problem with DDR2 configuration registers?

Thanks in advance,

Marcos Cunha
Electrical Enginner
Instituto Atl?ntico
www.atlantico.com.br

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2009-08-31 12:44 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-25 20:51 [U-Boot] mpc8315 DDR2 controller Marcos Cunha
2009-08-25 22:11 ` Wolfgang Denk
2009-08-31 12:44   ` Marcos Cunha

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox