* [U-Boot] Help U-boot Ralink
@ 2011-05-09 15:18 William S. Dorneles - OIW Telecom Solutions
2011-05-09 20:38 ` Wolfgang Denk
0 siblings, 1 reply; 2+ messages in thread
From: William S. Dorneles - OIW Telecom Solutions @ 2011-05-09 15:18 UTC (permalink / raw)
To: u-boot
Hello,
I tried to compile U-boot to Ralink RT2880, but shows this error:
[: 1: Illegal number:
dirname: operando extra `-gdwarf-2'
Experimente "dirname --help" para mais informa????es.
make -C `dirname lib_generic/libgeneric.a`
make[1]: Entrando no diret??rio `/Ralink/sdk3301/Uboot/lib_generic'
make[1]: *** Sem regra para processar o alvo
`/home/sdk3301/Uboot/include/common.h', necess??rio por `crc32.o'. Pare.
make[1]: Saindo do diret??rio `/Ralink/sdk3301/Uboot/lib_generic'
make: ** [lib_generic/libgeneric.a] Erro 2
What's going on?
Thank's
--
Atenciosamente,
William Schnoremberger Dorneles
Suporte T?cnico / RMA
MSN: suporte at oiw.com.br
Fone: 51 3653-6800
DDR: 51 3653-6807
OIW Telecom Solutions
www.oiw.com.br | www.oiwtech.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Help U-boot Ralink
2011-05-09 15:18 [U-Boot] Help U-boot Ralink William S. Dorneles - OIW Telecom Solutions
@ 2011-05-09 20:38 ` Wolfgang Denk
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Denk @ 2011-05-09 20:38 UTC (permalink / raw)
To: u-boot
Dear "William S. Dorneles - OIW Telecom Solutions",
In message <4DC805D9.3040709@oiwtech.com.br> you wrote:
>
> I tried to compile U-boot to Ralink RT2880, but shows this error:
Seems this board is not supported in mainline.
> [: 1: Illegal number:
> dirname: operando extra `-gdwarf-2'
> Experimente "dirname --help" para mais informa??es.
> make -C `dirname lib_generic/libgeneric.a`
> make[1]: Entrando no diret?rio `/Ralink/sdk3301/Uboot/lib_generic'
> make[1]: *** Sem regra para processar o alvo >
> `/home/sdk3301/Uboot/include/common.h', necess?rio por `crc32.o'. Par> e.
> make[1]: Saindo do diret?rio `/Ralink/sdk3301/Uboot/lib_generic'
> make: ** [lib_generic/libgeneric.a] Erro 2
>
> What's going on?
Are you working with some out of tree port? If so, then please
contact the makers of this port and ask them for help. We cannot help
you - we have no idea what your code might look like.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If a computer can't directly address all the RAM you can use, it's
just a toy." - anonymous comp.sys.amiga posting, non-sequitir
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-05-09 20:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-09 15:18 [U-Boot] Help U-boot Ralink William S. Dorneles - OIW Telecom Solutions
2011-05-09 20:38 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox