[U-Boot] u-boot-tegra/master and /next have been updated and uploaded to denx.de

[U-Boot] u-boot-tegra/master and /next have been updated and uploaded to denx.de

[Tom Warren]

Folks,

u-boot-tegra/next has been updated with new patches from Lucas, Marc, and
Stephen, rebased against u-boot-arm, and pushed to denx.de.

Please use this for any future patches, and if you have patches under
review, please rebase them if they no longer apply cleanly.

I'm going to be on vacation from the 16th thru the 25th of October. If you
have stuff you want in /next, and it's reviewed/Acked/tested, let me know
and I'll try to get it in on Monday before I leave.

Thanks,

Tom

[U-Boot] u-boot-tegra/master and /next have been updated and uploaded to denx.de

[Stephen Warren]

On 10/12/2012 03:26 PM, Tom Warren wrote:
> Folks,
> 
> u-boot-tegra/next has been updated with new patches from Lucas, Marc, and
> Stephen, rebased against u-boot-arm, and pushed to denx.de.

u-boot-tegra/next right now is based on u-boot-arm/master, but includes
patches that are both:

a) Already in u-boot-arm/next (but *not* u-boot-arm/master since master
is for the current release and next is for the next release)

b) New.

I think you want to create (rebase) u-boot-tegra/next based on
u-boot-arm/next, and drop the following patches (they would rebase out
anyway if you just rebase onto u-boot-arm/next):

c699a7b tegra: nand: add board pinmux
c7560dd tegra: clean up board include hell
1ddfbf3 tegra: add funcmux entry for NAND attached to KBC
8d49ab8 tegra20: rework UART GPIO handling
5904a2e tegra20: add clock_set_pllout function
0e0eb51 tegra20: complete periph_id enum
7811a6d tegra: enable CONFIG_CMD_PART
517ef6d Tegra20: Move some include files to arch-tegra for sharing with
Tegra30
1367676 Tegra20: Move some code files to common directories for upcoming
Tegra30 patches.
7d92ef4 tegra: Rename Medcom to Medcom-Wide
c527d55 tegra: Update Avionic Design vendor prefix

[U-Boot] u-boot-tegra/master and /next have been updated and uploaded to denx.de

[Albert ARIBAUD]

Hi Stephen,

On Fri, 12 Oct 2012 15:30:42 -0600, Stephen Warren
<swarren@wwwdotorg.org> wrote:

> On 10/12/2012 03:26 PM, Tom Warren wrote:
> > Folks,
> > 
> > u-boot-tegra/next has been updated with new patches from Lucas, Marc, and
> > Stephen, rebased against u-boot-arm, and pushed to denx.de.
> 
> u-boot-tegra/next right now is based on u-boot-arm/master, but includes
> patches that are both:
> 
> a) Already in u-boot-arm/next (but *not* u-boot-arm/master since master
> is for the current release and next is for the next release)
> 
> b) New.
> 
> I think you want to create (rebase) u-boot-tegra/next based on
> u-boot-arm/next, and drop the following patches (they would rebase out
> anyway if you just rebase onto u-boot-arm/next):
> 
> c699a7b tegra: nand: add board pinmux
> c7560dd tegra: clean up board include hell
> 1ddfbf3 tegra: add funcmux entry for NAND attached to KBC
> 8d49ab8 tegra20: rework UART GPIO handling
> 5904a2e tegra20: add clock_set_pllout function
> 0e0eb51 tegra20: complete periph_id enum
> 7811a6d tegra: enable CONFIG_CMD_PART
> 517ef6d Tegra20: Move some include files to arch-tegra for sharing with
> Tegra30
> 1367676 Tegra20: Move some code files to common directories for upcoming
> Tegra30 patches.
> 7d92ef4 tegra: Rename Medcom to Medcom-Wide
> c527d55 tegra: Update Avionic Design vendor prefix

I've rebased arm/next onto u-boot/next as they are now in sync --
whatever was on my next is now on master or in u-boot/next, with the
addition of the lh7a40x removal.

Amicalement,
-- 
Albert.