[U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2

[Stefan Mavrodiev <stefan.mavrodiev@gmail.com>]

On 02/07/2018 07:19 PM, Maxime Ripard wrote:
> On Wed, Feb 07, 2018 at 12:55:54PM +0530, Jagan Teki wrote:
>>>>>>> +&spi0 {
>>>>>>> +       pinctrl-names = "default";
>>>>>>> +       pinctrl-0 = <&spi0_pins_b>, <&spi0_cs0_pins_b>;
>>>>>>> +       status = "okay";
>>>>>>> +
>>>>>>> +       flash: w25q128 at 0 {
>>>>>> Was it sync from Linux?
>>>>> No, this isn't in the linux dts.
>>>> But we have to, please send it to Linux first.
>>> We've already commented this issue. In the v2 [1], I've explained that this
>>> won't go mainline, since it's optional feature. Rather it will be managed
>>> with overlays.
>> Thought this was already in ML, and ready to merge. So this never go
>> to Linux tree since it's optional? then add u-boot.dtsi for this
>> atleast since we always sync dts from Linux.
> This is an optional feature on that board. We should be making it as
> easy as possible to enable it, but a defconfig is a *default*
> configuration, and if the board doesn't have it by default, it
> shouldn't be enabled in the defconfig.
>
> Maxime
>
Sorry, but I'm really confused. In the first patch Jagan said to make 
separate patch
"just to test" the driver. Then I've made patch "just to test", and it's 
turn out it wasn't not OK,
because it should be compatible with linux, u-boot and etc. What's the 
point since it's just for testing...?

Sorry again, but can someone explain to me, that to do?
I'm not trying to pick on you guys. Just want to do the right thing.

Best regards,
Stefan Mavrodiev