[U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2

[Stefan Mavrodiev <stefan.mavrodiev@gmail.com>]

On 02/08/2018 09:03 AM, Jagan Teki wrote:
> On Thu, Feb 8, 2018 at 11:54 AM, Stefan Mavrodiev
> <stefan.mavrodiev@gmail.com> wrote:
>> On 02/07/2018 07:19 PM, Maxime Ripard wrote:
>>> On Wed, Feb 07, 2018 at 12:55:54PM +0530, Jagan Teki wrote:
>>>>>>>>> +&spi0 {
>>>>>>>>> +       pinctrl-names = "default";
>>>>>>>>> +       pinctrl-0 = <&spi0_pins_b>, <&spi0_cs0_pins_b>;
>>>>>>>>> +       status = "okay";
>>>>>>>>> +
>>>>>>>>> +       flash: w25q128 at 0 {
>>>>>>>> Was it sync from Linux?
>>>>>>> No, this isn't in the linux dts.
>>>>>> But we have to, please send it to Linux first.
>>>>> We've already commented this issue. In the v2 [1], I've explained that
>>>>> this
>>>>> won't go mainline, since it's optional feature. Rather it will be
>>>>> managed
>>>>> with overlays.
>>>> Thought this was already in ML, and ready to merge. So this never go
>>>> to Linux tree since it's optional? then add u-boot.dtsi for this
>>>> atleast since we always sync dts from Linux.
>>> This is an optional feature on that board. We should be making it as
>>> easy as possible to enable it, but a defconfig is a *default*
>>> configuration, and if the board doesn't have it by default, it
>>> shouldn't be enabled in the defconfig.
>>>
>>> Maxime
>>>
>> Sorry, but I'm really confused. In the first patch Jagan said to make
>> separate patch
>> "just to test" the driver. Then I've made patch "just to test", and it's
>> turn out it wasn't not OK,
>> because it should be compatible with linux, u-boot and etc. What's the point
>> since it's just for testing...?
>>
>> Sorry again, but can someone explain to me, that to do?
>> I'm not trying to pick on you guys. Just want to do the right thing.
> I think we're in out-of-sync for some reason.
>
> Here is my suggestion:
> Since it is "optional feature however similar boards of this type
> could not have it"?
>
> How about separate defconfig file?
> A20-OLinuXino-Lime2-spinor_defconfig and have same dts file with
>
> /* Disable SPI NOR by default: it optional on A20-OLinuXino-Lime2 boards */
> status = "disabled";
>
> But the dts should accept by Linux as well.

Already tried this [1] and got rejected.

[1] https://patchwork.kernel.org/patch/10076721/