U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Michal Simek <michal.simek@xilinx.com>
To: u-boot@lists.denx.de
Subject: [PATCH 4/8] spl: atf: remove helper structure from common header
Date: Wed, 18 Nov 2020 15:25:30 +0100	[thread overview]
Message-ID: <7d10c407-a5a6-13fa-0cae-a371f99c1c47@xilinx.com> (raw)
In-Reply-To: <20201116214731.29128-5-michael@walle.cc>



On 16. 11. 20 22:47, Michael Walle wrote:
> bl2_to_bl31_params_mem is just an implementation detail of the SPL ATF
> support and is not needed anywhere else. Move it from the header to the
> actual module.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  common/spl/spl_atf.c | 11 +++++++++++
>  include/atf_common.h | 14 --------------
>  2 files changed, 11 insertions(+), 14 deletions(-)
> 
> diff --git a/common/spl/spl_atf.c b/common/spl/spl_atf.c
> index 63af6a6207..51b45d5dc6 100644
> --- a/common/spl/spl_atf.c
> +++ b/common/spl/spl_atf.c
> @@ -18,6 +18,17 @@
>  #include <spl.h>
>  #include <asm/cache.h>
>  
> +/* Holds all the structures we need for bl31 parameter passing */
> +struct bl2_to_bl31_params_mem {
> +	struct bl31_params bl31_params;
> +	struct atf_image_info bl31_image_info;
> +	struct atf_image_info bl32_image_info;
> +	struct atf_image_info bl33_image_info;
> +	struct entry_point_info bl33_ep_info;
> +	struct entry_point_info bl32_ep_info;
> +	struct entry_point_info bl31_ep_info;
> +};
> +
>  struct bl31_params *bl2_plat_get_bl31_params_default(uintptr_t bl32_entry,
>  						     uintptr_t bl33_entry,
>  						     uintptr_t fdt_addr)
> diff --git a/include/atf_common.h b/include/atf_common.h
> index fd5454c55b..e173a10ca9 100644
> --- a/include/atf_common.h
> +++ b/include/atf_common.h
> @@ -162,20 +162,6 @@ struct bl31_params {
>  	struct atf_image_info *bl33_image_info;
>  };
>  
> -/*******************************************************************************
> - * This structure represents the superset of information that is passed to
> - * BL31, e.g. while passing control to it from BL2, bl31_params
> - * and other platform specific params
> - ******************************************************************************/
> -struct bl2_to_bl31_params_mem {
> -	struct bl31_params bl31_params;
> -	struct atf_image_info bl31_image_info;
> -	struct atf_image_info bl32_image_info;
> -	struct atf_image_info bl33_image_info;
> -	struct entry_point_info bl33_ep_info;
> -	struct entry_point_info bl32_ep_info;
> -	struct entry_point_info bl31_ep_info;
> -};
>  
>  #endif /*__ASSEMBLY__ */
>  
> 

Acked-by: Michal Simek <michal.simek@xilinx.com>

M

  reply	other threads:[~2020-11-18 14:25 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-16 21:47 [PATCH 0/8] spl: atf: add support for LOAD_IMAGE_V2 Michael Walle
2020-11-16 21:47 ` [PATCH 1/8] treewide: use CONFIG_IS_ENABLED() for ARMV8_SEC_FIRMWARE_SUPPORT Michael Walle
2020-11-18 14:21   ` Michal Simek
2020-11-16 21:47 ` [PATCH 2/8] spl: atf: move storage for bl31_params into function Michael Walle
2020-11-18 14:07   ` Michal Simek
2020-11-16 21:47 ` [PATCH 3/8] spl: atf: provide a bl2_plat_get_bl31_params_default() Michael Walle
2020-11-18 14:23   ` Michal Simek
2020-11-18 14:24     ` Michal Simek
2020-11-16 21:47 ` [PATCH 4/8] spl: atf: remove helper structure from common header Michael Walle
2020-11-18 14:25   ` Michal Simek [this message]
2020-11-16 21:47 ` [PATCH 5/8] spl: atf: add support for LOAD_IMAGE_V2 Michael Walle
2020-11-18 14:26   ` Michal Simek
2020-11-16 21:47 ` [PATCH 6/8] armv8: layerscape: don't initialize GIC in SPL Michael Walle
2020-11-16 21:47 ` [PATCH 7/8] board: sl28: add ATF support (bl31) Michael Walle
2020-11-18 14:06   ` Michal Simek
2020-11-18 14:10     ` Michael Walle
2020-11-18 14:15       ` Michal Simek
2020-11-18 14:20         ` Michael Walle
2020-11-18 16:11         ` Michael Walle
2020-11-16 21:47 ` [PATCH 8/8] board: sl28: add OP-TEE Trusted OS support (bl32) Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7d10c407-a5a6-13fa-0cae-a371f99c1c47@xilinx.com \
    --to=michal.simek@xilinx.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox