[PATCH V2 0/4] arm: dts: k3-am625*: Upgrade kernel dts to v6.7-rc1

[PATCH V2 0/4] arm: dts: k3-am625*: Upgrade kernel dts to v6.7-rc1

[Nishanth Menon]

Hi,
rev 2 of the series to sync am62 with v6.7-rc1.

Changes:
- picked up reviews, tested tags.
- minor commit message correction in patch #4.

Boot logs:
https://gist.github.com/nmenon/d62c4795c6d3d40c83ba36d1cd047c42

WARNING: This will have  a minor conflict (binman) with:
https://lore.kernel.org/u-boot/20231104080137.9628-1-nm@ti.com/


I haven't had a chance to test this out on verdin (only build tested)
- going to depend on any checks folks can provide.

V1: https://lore.kernel.org/all/20231113145919.1928812-1-nm@ti.com/

Nishanth Menon (4):
  arm: dts: k3-am625*: Sync with kernel v6.7-rc1
  arm: dts: k3-am625: Drop SoC provided bootph params from board
    u-boot/r5 dtsi
  arm: dts: k3-am625-beagleplay-u-boot: drop duplicate bootph-nodes
  arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes

 arch/arm/dts/k3-am62-main.dtsi                |  12 +-
 arch/arm/dts/k3-am62-mcu.dtsi                 |   2 +
 arch/arm/dts/k3-am62-verdin-wifi.dtsi         |   6 +
 arch/arm/dts/k3-am62-verdin.dtsi              |   1 +
 arch/arm/dts/k3-am62-wakeup.dtsi              |   2 +
 arch/arm/dts/k3-am62.dtsi                     |   3 +
 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi  | 110 -------------
 arch/arm/dts/k3-am625-beagleplay.dts          |  34 +++-
 arch/arm/dts/k3-am625-r5-beagleplay.dts       |   9 --
 arch/arm/dts/k3-am625-r5-sk.dts               |  21 +--
 arch/arm/dts/k3-am625-sk-u-boot.dtsi          | 145 ------------------
 arch/arm/dts/k3-am625-sk.dts                  |  27 ++++
 arch/arm/dts/k3-am625-verdin-r5.dts           |   9 --
 .../dts/k3-am625-verdin-wifi-dev-u-boot.dtsi  |  55 +------
 arch/arm/dts/k3-am62x-sk-common.dtsi          | 109 ++++++++++++-
 15 files changed, 197 insertions(+), 348 deletions(-)

-- 
2.40.0

[PATCH V2 1/4] arm: dts: k3-am625*: Sync with kernel v6.7-rc1

[Nishanth Menon]

Sync with kernel v6.7-rc1 and sync up the u-boot dts files accordingly.

Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since v1:
- just tested-by tag.

V1: https://lore.kernel.org/r/20231113145919.1928812-2-nm@ti.com

 arch/arm/dts/k3-am62-main.dtsi        |  12 ++-
 arch/arm/dts/k3-am62-mcu.dtsi         |   2 +
 arch/arm/dts/k3-am62-verdin-wifi.dtsi |   6 ++
 arch/arm/dts/k3-am62-verdin.dtsi      |   1 +
 arch/arm/dts/k3-am62-wakeup.dtsi      |   2 +
 arch/arm/dts/k3-am62.dtsi             |   3 +
 arch/arm/dts/k3-am625-beagleplay.dts  |  34 +++++++-
 arch/arm/dts/k3-am625-sk.dts          |  27 +++++++
 arch/arm/dts/k3-am62x-sk-common.dtsi  | 109 +++++++++++++++++++++++++-
 9 files changed, 193 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/k3-am62-main.dtsi b/arch/arm/dts/k3-am62-main.dtsi
index 284b90c94da8..e5c64c86d1d5 100644
--- a/arch/arm/dts/k3-am62-main.dtsi
+++ b/arch/arm/dts/k3-am62-main.dtsi
@@ -81,7 +81,8 @@
 	};
 
 	dmss: bus@48000000 {
-		compatible = "simple-mfd";
+		bootph-all;
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		dma-ranges;
@@ -90,6 +91,7 @@
 		ti,sci-dev-id = <25>;
 
 		secure_proxy_main: mailbox@4d000000 {
+			bootph-all;
 			compatible = "ti,am654-secure-proxy";
 			#mbox-cells = <1>;
 			reg-names = "target_data", "rt", "scfg";
@@ -165,6 +167,7 @@
 	};
 
 	dmsc: system-controller@44043000 {
+		bootph-all;
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 		mbox-names = "rx", "tx";
@@ -174,16 +177,19 @@
 		reg = <0x00 0x44043000 0x00 0xfe0>;
 
 		k3_pds: power-controller {
+			bootph-all;
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
 		};
 
 		k3_clks: clock-controller {
+			bootph-all;
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
 
 		k3_reset: reset-controller {
+			bootph-all;
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
 		};
@@ -202,6 +208,7 @@
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
+		bootph-pre-ram;
 		compatible = "ti,am654-secure-proxy";
 		#mbox-cells = <1>;
 		reg-names = "target_data", "rt", "scfg";
@@ -217,6 +224,7 @@
 	};
 
 	main_pmx0: pinctrl@f4000 {
+		bootph-all;
 		compatible = "pinctrl-single";
 		reg = <0x00 0xf4000 0x00 0x2ac>;
 		#pinctrl-cells = <1>;
@@ -225,12 +233,14 @@
 	};
 
 	main_esm: esm@420000 {
+		bootph-pre-ram;
 		compatible = "ti,j721e-esm";
 		reg = <0x00 0x420000 0x00 0x1000>;
 		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
 	};
 
 	main_timer0: timer@2400000 {
+		bootph-all;
 		compatible = "ti,am654-timer";
 		reg = <0x00 0x2400000 0x00 0x400>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/dts/k3-am62-mcu.dtsi b/arch/arm/dts/k3-am62-mcu.dtsi
index 80a3e1db26a9..0e0b234581c6 100644
--- a/arch/arm/dts/k3-am62-mcu.dtsi
+++ b/arch/arm/dts/k3-am62-mcu.dtsi
@@ -7,6 +7,7 @@
 
 &cbass_mcu {
 	mcu_pmx0: pinctrl@4084000 {
+		bootph-all;
 		compatible = "pinctrl-single";
 		reg = <0x00 0x04084000 0x00 0x88>;
 		#pinctrl-cells = <1>;
@@ -15,6 +16,7 @@
 	};
 
 	mcu_esm: esm@4100000 {
+		bootph-pre-ram;
 		compatible = "ti,j721e-esm";
 		reg = <0x00 0x4100000 0x00 0x1000>;
 		ti,esm-pins = <0>, <1>, <2>, <85>;
diff --git a/arch/arm/dts/k3-am62-verdin-wifi.dtsi b/arch/arm/dts/k3-am62-verdin-wifi.dtsi
index 90ddc71bcd30..a6808b10c7b2 100644
--- a/arch/arm/dts/k3-am62-verdin-wifi.dtsi
+++ b/arch/arm/dts/k3-am62-verdin-wifi.dtsi
@@ -35,5 +35,11 @@
 &main_uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+		fw-init-baudrate = <3000000>;
+	};
 };
diff --git a/arch/arm/dts/k3-am62-verdin.dtsi b/arch/arm/dts/k3-am62-verdin.dtsi
index 40992e7e4c30..5db52f237253 100644
--- a/arch/arm/dts/k3-am62-verdin.dtsi
+++ b/arch/arm/dts/k3-am62-verdin.dtsi
@@ -1061,6 +1061,7 @@
 		vddc-supply = <&reg_1v2_dsi>;
 		vddmipi-supply = <&reg_1v2_dsi>;
 		vddio-supply = <&reg_1v8_dsi>;
+		status = "disabled";
 
 		dsi_bridge_ports: ports {
 			#address-cells = <1>;
diff --git a/arch/arm/dts/k3-am62-wakeup.dtsi b/arch/arm/dts/k3-am62-wakeup.dtsi
index eae052887186..fef76f52a52e 100644
--- a/arch/arm/dts/k3-am62-wakeup.dtsi
+++ b/arch/arm/dts/k3-am62-wakeup.dtsi
@@ -7,6 +7,7 @@
 
 &cbass_wakeup {
 	wkup_conf: syscon@43000000 {
+		bootph-all;
 		compatible = "syscon", "simple-mfd";
 		reg = <0x00 0x43000000 0x00 0x20000>;
 		#address-cells = <1>;
@@ -14,6 +15,7 @@
 		ranges = <0x0 0x00 0x43000000 0x20000>;
 
 		chipid: chipid@14 {
+			bootph-all;
 			compatible = "ti,am654-chipid";
 			reg = <0x14 0x4>;
 		};
diff --git a/arch/arm/dts/k3-am62.dtsi b/arch/arm/dts/k3-am62.dtsi
index 11f14eef2d44..f1e15206e1ce 100644
--- a/arch/arm/dts/k3-am62.dtsi
+++ b/arch/arm/dts/k3-am62.dtsi
@@ -47,6 +47,7 @@
 	};
 
 	cbass_main: bus@f0000 {
+		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -86,6 +87,7 @@
 			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 
 		cbass_mcu: bus@4000000 {
+			bootph-all;
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -93,6 +95,7 @@
 		};
 
 		cbass_wakeup: bus@b00000 {
+			bootph-all;
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
index 7cfdf562b53b..9a6bd0a3c94f 100644
--- a/arch/arm/dts/k3-am625-beagleplay.dts
+++ b/arch/arm/dts/k3-am625-beagleplay.dts
@@ -46,6 +46,7 @@
 	};
 
 	memory@80000000 {
+		bootph-pre-ram;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -58,7 +59,7 @@
 
 		ramoops: ramoops@9ca00000 {
 			compatible = "ramoops";
-			reg = <0x00 0x9c700000 0x00 0x00100000>;
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x00>;
@@ -83,6 +84,7 @@
 	};
 
 	vsys_5v0: regulator-1 {
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vsys_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -93,6 +95,7 @@
 
 	vdd_3v3: regulator-2 {
 		/* output of TLV62595DMQR-U12 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -118,6 +121,7 @@
 
 	vdd_3v3_sd: regulator-4 {
 		/* output of TPS22918DBVR-U21 */
+		bootph-all;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
 
@@ -132,6 +136,7 @@
 	};
 
 	vdd_sd_dv: regulator-5 {
+		bootph-all;
 		compatible = "regulator-gpio";
 		regulator-name = "sd_hs200_switch";
 		pinctrl-names = "default";
@@ -146,9 +151,11 @@
 	};
 
 	leds {
+		bootph-all;
 		compatible = "gpio-leds";
 
 		led-0 {
+			bootph-all;
 			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			function = LED_FUNCTION_HEARTBEAT;
@@ -156,6 +163,7 @@
 		};
 
 		led-1 {
+			bootph-all;
 			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 			function = LED_FUNCTION_DISK_ACTIVITY;
@@ -163,16 +171,19 @@
 		};
 
 		led-2 {
+			bootph-all;
 			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_CPU;
 		};
 
 		led-3 {
+			bootph-all;
 			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_LAN;
 		};
 
 		led-4 {
+			bootph-all;
 			gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_WLAN;
 		};
@@ -245,6 +256,7 @@
 
 &main_pmx0 {
 	gpio0_pins_default: gpio0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
 			AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
@@ -264,6 +276,7 @@
 	};
 
 	vdd_sd_dv_pins_default: vdd-sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
 		>;
@@ -283,6 +296,7 @@
 	};
 
 	local_i2c_pins_default: local-i2c-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
 			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
@@ -321,6 +335,7 @@
 	};
 
 	emmc_pins_default: emmc-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
 			AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
@@ -336,12 +351,14 @@
 	};
 
 	vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
 		>;
 	};
 
 	sd_pins_default: sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
 			AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
@@ -418,6 +435,7 @@
 	};
 
 	mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
 			AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
@@ -426,6 +444,7 @@
 	};
 
 	console_pins_default: console-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
 			AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
@@ -597,6 +616,7 @@
 };
 
 &main_gpio0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio0_pins_default>;
 	gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT",	/* 0-2 */
@@ -616,6 +636,7 @@
 };
 
 &main_gpio1 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mikrobus_gpio_pins_default>;
 	gpio-line-names = "", "", "", "", "",			/* 0-4 */
@@ -633,6 +654,7 @@
 };
 
 &main_i2c0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&local_i2c_pins_default>;
 	clock-frequency = <400000>;
@@ -651,6 +673,7 @@
 	};
 
 	tps65219: pmic@30 {
+		bootph-all;
 		compatible = "ti,tps65219";
 		reg = <0x30>;
 		buck1-supply = <&vsys_5v0>;
@@ -801,6 +824,7 @@
 };
 
 &sdhci0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -810,6 +834,7 @@
 
 &sdhci1 {
 	/* SD/MMC */
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd_pins_default>;
 
@@ -850,6 +875,7 @@
 };
 
 &main_uart0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&console_pins_default>;
 	status = "okay";
@@ -870,6 +896,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wifi_debug_uart_pins_default>;
 	status = "okay";
+
+	mcu {
+		compatible = "ti,cc1352p7";
+		reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
+		vdds-supply = <&vdd_3v3>;
+	};
 };
 
 &dss {
diff --git a/arch/arm/dts/k3-am625-sk.dts b/arch/arm/dts/k3-am625-sk.dts
index 7c98c1b855d1..b18092497c9a 100644
--- a/arch/arm/dts/k3-am625-sk.dts
+++ b/arch/arm/dts/k3-am625-sk.dts
@@ -31,6 +31,7 @@
 
 	vmain_pd: regulator-0 {
 		/* TPS65988 PD CONTROLLER OUTPUT */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vmain_pd";
 		regulator-min-microvolt = <5000000>;
@@ -41,6 +42,7 @@
 
 	vcc_5v0: regulator-1 {
 		/* Output of LM34936 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -52,6 +54,7 @@
 
 	vcc_3v3_sys: regulator-2 {
 		/* output of LM61460-Q1 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_3v3_sys";
 		regulator-min-microvolt = <3300000>;
@@ -63,6 +66,7 @@
 
 	vdd_mmc1: regulator-3 {
 		/* TPS22918DBVR */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_mmc1";
 		regulator-min-microvolt = <3300000>;
@@ -75,6 +79,7 @@
 
 	vdd_sd_dv: regulator-4 {
 		/* Output of TLV71033 */
+		bootph-all;
 		compatible = "regulator-gpio";
 		regulator-name = "tlv71033";
 		pinctrl-names = "default";
@@ -102,6 +107,7 @@
 
 &main_pmx0 {
 	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
 			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
@@ -119,6 +125,7 @@
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
 			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
@@ -135,20 +142,32 @@
 	};
 
 	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
 		>;
 	};
 
 	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
 		>;
 	};
 };
 
+&main_gpio0 {
+	bootph-all;
+};
+
+&main_gpio1 {
+	bootph-all;
+};
+
 &main_i2c1 {
+	bootph-all;
 	exp1: gpio@22 {
+		bootph-all;
 		compatible = "ti,tca6424";
 		reg = <0x22>;
 		gpio-controller;
@@ -207,12 +226,18 @@
 	};
 };
 
+&fss {
+	bootph-all;
+};
+
 &ospi0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
 	flash@0 {
+		bootph-all;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
@@ -225,6 +250,7 @@
 		cdns,read-delay = <4>;
 
 		partitions {
+			bootph-all;
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -260,6 +286,7 @@
 			};
 
 			partition@3fc0000 {
+				bootph-pre-ram;
 				label = "ospi.phypattern";
 				reg = <0x3fc0000 0x40000>;
 			};
diff --git a/arch/arm/dts/k3-am62x-sk-common.dtsi b/arch/arm/dts/k3-am62x-sk-common.dtsi
index 34c8ffc553ec..19f57ead4ebd 100644
--- a/arch/arm/dts/k3-am62x-sk-common.dtsi
+++ b/arch/arm/dts/k3-am62x-sk-common.dtsi
@@ -28,6 +28,7 @@
 	};
 
 	memory@80000000 {
+		bootph-pre-ram;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -114,11 +115,23 @@
 			clocks = <&tlv320_mclk>;
 		};
 	};
+
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
 };
 
 &main_pmx0 {
 	/* First pad number is ALW package and second is AMC package */
 	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
 			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
@@ -126,6 +139,7 @@
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
+		bootph-pre-ram;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
 			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
@@ -156,6 +170,7 @@
 	};
 
 	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
 			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
@@ -171,6 +186,7 @@
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
 			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
@@ -196,6 +212,7 @@
 	};
 
 	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
 			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
@@ -226,10 +243,44 @@
 			AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */
 		>;
 	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
+			AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
+			AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
+			AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
+			AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+			AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
+			AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
+			AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
+		>;
+	};
 };
 
 &mcu_pmx0 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-pre-ram;
 		pinctrl-single,pins = <
 			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */
 			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */
@@ -241,12 +292,14 @@
 
 &wkup_uart0 {
 	/* WKUP UART0 is used by DM firmware */
+	bootph-pre-ram;
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_uart0_pins_default>;
 };
 
 &main_uart0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -254,6 +307,7 @@
 
 &main_uart1 {
 	/* Main UART1 is used by TIFS firmware */
+	bootph-pre-ram;
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
@@ -300,7 +354,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tlv320aic3106: audio-codec@1b {
 		#sound-dai-cells = <0>;
@@ -313,9 +367,40 @@
 		IOVDD-supply = <&vcc_3v3_sys>;
 		DRVDD-supply = <&vcc_3v3_sys>;
 	};
+
+	sii9022: bridge-hdmi@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		interrupt-parent = <&exp1>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = < 0 >;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
@@ -325,6 +410,7 @@
 
 &sdhci1 {
 	/* SD/MMC */
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
@@ -333,21 +419,25 @@
 };
 
 &cpsw3g {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
 };
 
 &cpsw_port1 {
+	bootph-all;
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
 };
 
 &cpsw3g_mdio {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mdio1_pins_default>;
 
 	cpsw3g_phy0: ethernet-phy@0 {
+		bootph-all;
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
@@ -410,3 +500,20 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+};
+
+&dss_ports {
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
-- 
2.40.0

[PATCH V2 2/4] arm: dts: k3-am625: Drop SoC provided bootph params from board u-boot/r5 dtsi

[Nishanth Menon]

k3-am62* SoC dtsi files now provide the following:

bootph-all: dmss secure_proxy_main dmsc k3_pds k3_clks k3_reset
   main_pmx0 main_timer0 mcu_pmx0 wkup_conf chipid

bootph-pre-ram: secure_proxy_sa3 main_esm mcu_esm

Drop these from board r5 and u-boot.dtsi files as these are duplicate in
them now.

Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since v1:
- just picked up acks and tested tags

V1: https://lore.kernel.org/r/20231113145919.1928812-3-nm@ti.com

 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi  | 54 ------------------
 arch/arm/dts/k3-am625-r5-beagleplay.dts       |  9 ---
 arch/arm/dts/k3-am625-r5-sk.dts               |  9 ---
 arch/arm/dts/k3-am625-sk-u-boot.dtsi          | 53 ------------------
 arch/arm/dts/k3-am625-verdin-r5.dts           |  9 ---
 .../dts/k3-am625-verdin-wifi-dev-u-boot.dtsi  | 55 +------------------
 6 files changed, 2 insertions(+), 187 deletions(-)

diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index d6c6baa5518b..6f3a31558b20 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -47,59 +47,17 @@
 	};
 };
 
-&cbass_main {
-	bootph-all;
-};
-
 &main_timer0 {
 	clock-frequency = <25000000>;
-	bootph-all;
-};
-
-&dmss {
-	bootph-all;
-};
-
-&secure_proxy_main {
-	bootph-all;
-};
-
-&dmsc {
-	bootph-all;
-};
-
-&k3_pds {
-	bootph-all;
-};
-
-&k3_clks {
-	bootph-all;
-};
-
-&k3_reset {
-	bootph-all;
 };
 
 &dmsc {
-	bootph-all;
 	k3_sysreset: sysreset-controller {
 		compatible = "ti,sci-sysreset";
 		bootph-all;
 	};
 };
 
-&wkup_conf {
-	bootph-all;
-};
-
-&chipid {
-	bootph-all;
-};
-
-&main_pmx0 {
-	bootph-all;
-};
-
 &main_uart0 {
 	bootph-all;
 };
@@ -108,18 +66,6 @@
 	bootph-all;
 };
 
-&cbass_mcu {
-	bootph-all;
-};
-
-&cbass_wakeup {
-	bootph-all;
-};
-
-&mcu_pmx0 {
-	bootph-all;
-};
-
 &main_i2c0 {
 	bootph-all;
 };
diff --git a/arch/arm/dts/k3-am625-r5-beagleplay.dts b/arch/arm/dts/k3-am625-r5-beagleplay.dts
index 9c9d0570592a..1f450f55c1d2 100644
--- a/arch/arm/dts/k3-am625-r5-beagleplay.dts
+++ b/arch/arm/dts/k3-am625-r5-beagleplay.dts
@@ -54,12 +54,7 @@
 	ti,secure-host;
 };
 
-&mcu_esm {
-	bootph-pre-ram;
-};
-
 &secure_proxy_sa3 {
-	bootph-pre-ram;
 	/* We require this for boot handshake */
 	status = "okay";
 };
@@ -73,10 +68,6 @@
 	};
 };
 
-&main_esm {
-	bootph-pre-ram;
-};
-
 &main_pktdma {
 	ti,sci = <&dm_tifs>;
 };
diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts
index bf219226b974..55420b2f2c15 100644
--- a/arch/arm/dts/k3-am625-r5-sk.dts
+++ b/arch/arm/dts/k3-am625-r5-sk.dts
@@ -55,20 +55,11 @@
 	ti,secure-host;
 };
 
-&mcu_esm {
-	bootph-pre-ram;
-};
-
 &secure_proxy_sa3 {
-	bootph-pre-ram;
 	/* We require this for boot handshake */
 	status = "okay";
 };
 
-&main_esm {
-	bootph-pre-ram;
-};
-
 &cbass_main {
 	sysctrler: sysctrler {
 		compatible = "ti,am654-system-controller";
diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index 7ae5e01f7c7f..dcf7c7652d31 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -25,49 +25,8 @@
 	bootph-all;
 };
 
-&cbass_main {
-	bootph-all;
-};
-
 &main_timer0 {
 	clock-frequency = <25000000>;
-	bootph-all;
-};
-
-&dmss {
-	bootph-all;
-};
-
-&secure_proxy_main {
-	bootph-all;
-};
-
-&dmsc {
-	bootph-all;
-};
-
-&k3_pds {
-	bootph-all;
-};
-
-&k3_clks {
-	bootph-all;
-};
-
-&k3_reset {
-	bootph-all;
-};
-
-&wkup_conf {
-	bootph-all;
-};
-
-&chipid {
-	bootph-all;
-};
-
-&main_pmx0 {
-	bootph-all;
 };
 
 &main_uart0 {
@@ -78,18 +37,6 @@
 	bootph-all;
 };
 
-&cbass_mcu {
-	bootph-all;
-};
-
-&cbass_wakeup {
-	bootph-all;
-};
-
-&mcu_pmx0 {
-	bootph-all;
-};
-
 &sdhci1 {
 	bootph-all;
 };
diff --git a/arch/arm/dts/k3-am625-verdin-r5.dts b/arch/arm/dts/k3-am625-verdin-r5.dts
index 0cae9c577732..305d199678b3 100644
--- a/arch/arm/dts/k3-am625-verdin-r5.dts
+++ b/arch/arm/dts/k3-am625-verdin-r5.dts
@@ -69,16 +69,7 @@
 	ti,secure-host;
 };
 
-&main_esm {
-	bootph-pre-ram;
-};
-
-&mcu_esm {
-	bootph-pre-ram;
-};
-
 &secure_proxy_sa3 {
-	bootph-pre-ram;
 	/* We require this for boot handshake */
 	status = "okay";
 };
diff --git a/arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi b/arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi
index 75cb60b57d79..86e2d111f541 100644
--- a/arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi
@@ -21,25 +21,8 @@
 	};
 };
 
-&cbass_main {
-	bootph-all;
-
-	timer@2400000 {
-		clock-frequency = <25000000>;
-		bootph-all;
-	};
-};
-
-&cbass_mcu {
-	bootph-all;
-};
-
-&cbass_wakeup {
-	bootph-all;
-};
-
-&chipid {
-	bootph-all;
+&main_timer0 {
+	clock-frequency = <25000000>;
 };
 
 &main_bcdma {
@@ -98,34 +81,16 @@
 };
 
 &dmsc {
-	bootph-all;
-
 	k3_sysreset: sysreset-controller {
 		compatible = "ti,sci-sysreset";
 		bootph-all;
 	};
 };
 
-&dmss {
-	bootph-all;
-};
-
 &fss {
 	bootph-all;
 };
 
-&k3_clks {
-	bootph-all;
-};
-
-&k3_pds {
-	bootph-all;
-};
-
-&k3_reset {
-	bootph-all;
-};
-
 &main_gpio0 {
 	bootph-all;
 };
@@ -156,10 +121,6 @@
 	};
 };
 
-&main_pmx0 {
-	bootph-all;
-};
-
 /* Verdin UART_3, used as the Linux console */
 &main_uart0 {
 	bootph-all;
@@ -170,10 +131,6 @@
 	bootph-all;
 };
 
-&mcu_pmx0 {
-	bootph-all;
-};
-
 &pinctrl_ctrl_sleep_moci {
 	bootph-all;
 };
@@ -210,18 +167,10 @@
 	status = "disabled";
 };
 
-&secure_proxy_main {
-	bootph-all;
-};
-
 &verdin_ctrl_sleep_moci {
 	bootph-all;
 };
 
-&wkup_conf {
-	bootph-all;
-};
-
 /* Verdin UART_2 */
 &wkup_uart0 {
 	bootph-all;
-- 
2.40.0

[PATCH V2 3/4] arm: dts: k3-am625-beagleplay-u-boot: drop duplicate bootph-nodes

[Nishanth Menon]

Kernel dts import now provides bootph-all and bootph-pre-ram properties
for the properties we have been overriding so far. Drop the same.

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since v1:
- tested and reviewed tags

V1: https://lore.kernel.org/r/20231113145919.1928812-4-nm@ti.com
 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 56 --------------------
 1 file changed, 56 deletions(-)

diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index 6f3a31558b20..7f8468f298f0 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -13,36 +13,26 @@
 		tick-timer = &main_timer0;
 	};
 
-	memory@80000000 {
-		bootph-all;
-	};
-
 	/* Keep the LEDs on by default to indicate life */
 	leds {
-		bootph-all;
 		led-0 {
 			default-state = "on";
-			bootph-all;
 		};
 
 		led-1 {
 			default-state = "on";
-			bootph-all;
 		};
 
 		led-2 {
 			default-state = "on";
-			bootph-all;
 		};
 
 		led-3 {
 			default-state = "on";
-			bootph-all;
 		};
 
 		led-4 {
 			default-state = "on";
-			bootph-all;
 		};
 	};
 };
@@ -58,45 +48,7 @@
 	};
 };
 
-&main_uart0 {
-	bootph-all;
-};
-
-&console_pins_default {
-	bootph-all;
-};
-
-&main_i2c0 {
-	bootph-all;
-};
-
-&local_i2c_pins_default {
-	bootph-all;
-};
-
-&gpio0_pins_default {
-	bootph-all;
-};
-
-&main_gpio0 {
-	bootph-all;
-};
-
-&main_gpio1 {
-	bootph-all;
-};
-
-&sdhci0 {
-	/* EMMC */
-	bootph-all;
-};
-
-&emmc_pins_default {
-	bootph-all;
-};
-
 &sd_pins_default {
-	bootph-all;
 	/* Force to use SDCD card detect pin */
 	pinctrl-single,pins = <
 		AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
@@ -109,14 +61,6 @@
 	>;
 };
 
-&tps65219 {
-	bootph-all;
-};
-
-&sdhci1 {
-	bootph-all;
-};
-
 #ifdef CONFIG_TARGET_AM625_A53_EVM
 
 #define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/k3-am625-beagleplay.dtb"
-- 
2.40.0

[PATCH V2 4/4] arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes

[Nishanth Menon]

Kernel dts import now provides bootph-all and bootph-pre-ram properties
for the properties we have been overriding so far. Drop the same.

While at this enable the DM and TIFS UARTs for programming pinmux
since they are marked reserved by board.dts

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes:
- capitalize TIFS and UART.
- pick up reviewed and tested tags

V1: https://lore.kernel.org/r/20231113145919.1928812-5-nm@ti.com
 arch/arm/dts/k3-am625-r5-sk.dts      | 12 +---
 arch/arm/dts/k3-am625-sk-u-boot.dtsi | 92 ----------------------------
 2 files changed, 2 insertions(+), 102 deletions(-)

diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts
index 55420b2f2c15..6b9f40e55581 100644
--- a/arch/arm/dts/k3-am625-r5-sk.dts
+++ b/arch/arm/dts/k3-am625-r5-sk.dts
@@ -69,22 +69,14 @@
 	};
 };
 
-&wkup_uart0_pins_default {
-	bootph-pre-ram;
-};
-
-&main_uart1_pins_default {
-	bootph-pre-ram;
-};
-
 /* WKUP UART0 is used for DM firmware logs */
 &wkup_uart0 {
-	bootph-pre-ram;
+	status = "okay";
 };
 
 /* Main UART1 is used for TIFS firmware logs */
 &main_uart1 {
-	bootph-pre-ram;
+	status = "okay";
 };
 
 &ospi0 {
diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index dcf7c7652d31..fa778b0ff4c1 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -8,71 +8,14 @@
 
 / {
 	chosen {
-		stdout-path = "serial2:115200n8";
 		tick-timer = &main_timer0;
 	};
-
-	aliases {
-		mmc1 = &sdhci1;
-	};
-
-	memory@80000000 {
-		bootph-all;
-	};
-};
-
-&main_conf {
-	bootph-all;
 };
 
 &main_timer0 {
 	clock-frequency = <25000000>;
 };
 
-&main_uart0 {
-	bootph-all;
-};
-
-&main_uart0_pins_default {
-	bootph-all;
-};
-
-&sdhci1 {
-	bootph-all;
-};
-
-&main_mmc1_pins_default {
-	bootph-all;
-};
-
-&fss {
-	bootph-all;
-};
-
-&ospi0_pins_default {
-	bootph-all;
-};
-
-&ospi0 {
-	bootph-all;
-
-	flash@0 {
-		bootph-all;
-
-		partitions {
-			bootph-all;
-
-			partition@3fc0000 {
-				bootph-all;
-			};
-		};
-	};
-};
-
-&inta_main_dmss {
-	bootph-all;
-};
-
 &main_bcdma {
 	reg = <0x00 0x485c0100 0x00 0x100>,
 	      <0x00 0x4c000000 0x00 0x20000>,
@@ -100,41 +43,6 @@
 	bootph-all;
 };
 
-&cpsw3g_mdio {
-	bootph-all;
-};
-
-&cpsw3g_phy0 {
-	bootph-all;
-};
-
-&cpsw3g_phy1 {
-	bootph-all;
-};
-
-&main_rgmii1_pins_default {
-	bootph-all;
-};
-
-&main_rgmii2_pins_default {
-	bootph-all;
-};
-
-&phy_gmii_sel {
-	bootph-all;
-};
-
-&cpsw3g {
-	bootph-all;
-	ethernet-ports {
-		bootph-all;
-	};
-};
-
-&cpsw_port1 {
-	bootph-all;
-};
-
 &cpsw_port2 {
 	status = "disabled";
 };
-- 
2.40.0

Re: [PATCH V2 0/4] arm: dts: k3-am625*: Upgrade kernel dts to v6.7-rc1

[Roger Quadros]

On 15/11/2023 05:28, Nishanth Menon wrote:
> Hi,
> rev 2 of the series to sync am62 with v6.7-rc1.
> 
> Changes:
> - picked up reviews, tested tags.
> - minor commit message correction in patch #4.
> 
> Boot logs:
> https://gist.github.com/nmenon/d62c4795c6d3d40c83ba36d1cd047c42
> 
> WARNING: This will have  a minor conflict (binman) with:
> https://lore.kernel.org/u-boot/20231104080137.9628-1-nm@ti.com/
> 
> 
> I haven't had a chance to test this out on verdin (only build tested)
> - going to depend on any checks folks can provide.
> 
> V1: https://lore.kernel.org/all/20231113145919.1928812-1-nm@ti.com/
> 
> Nishanth Menon (4):
>   arm: dts: k3-am625*: Sync with kernel v6.7-rc1
>   arm: dts: k3-am625: Drop SoC provided bootph params from board
>     u-boot/r5 dtsi
>   arm: dts: k3-am625-beagleplay-u-boot: drop duplicate bootph-nodes
>   arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes

for this series:

Reviewed-by: Roger Quadros <rogerq@kernel.org>

Re: [PATCH V2 0/4] arm: dts: k3-am625*: Upgrade kernel dts to v6.7-rc1

[Marcel Ziswiler]

Hi Nishanth

On Tue, 2023-11-14 at 21:28 -0600, Nishanth Menon wrote:
> Hi,
> rev 2 of the series to sync am62 with v6.7-rc1.

For the whole series:

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

> Changes:
> - picked up reviews, tested tags.
> - minor commit message correction in patch #4.
> 
> Boot logs:
> https://gist.github.com/nmenon/d62c4795c6d3d40c83ba36d1cd047c42
> 
> WARNING: This will have  a minor conflict (binman) with:
> https://lore.kernel.org/u-boot/20231104080137.9628-1-nm@ti.com/
> 
> 
> I haven't had a chance to test this out on verdin (only build tested)
> - going to depend on any checks folks can provide.
> 
> V1: https://lore.kernel.org/all/20231113145919.1928812-1-nm@ti.com/
> 
> Nishanth Menon (4):
>   arm: dts: k3-am625*: Sync with kernel v6.7-rc1
>   arm: dts: k3-am625: Drop SoC provided bootph params from board
>     u-boot/r5 dtsi
>   arm: dts: k3-am625-beagleplay-u-boot: drop duplicate bootph-nodes
>   arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes
> 
>  arch/arm/dts/k3-am62-main.dtsi                |  12 +-
>  arch/arm/dts/k3-am62-mcu.dtsi                 |   2 +
>  arch/arm/dts/k3-am62-verdin-wifi.dtsi         |   6 +
>  arch/arm/dts/k3-am62-verdin.dtsi              |   1 +
>  arch/arm/dts/k3-am62-wakeup.dtsi              |   2 +
>  arch/arm/dts/k3-am62.dtsi                     |   3 +
>  arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi  | 110 -------------
>  arch/arm/dts/k3-am625-beagleplay.dts          |  34 +++-
>  arch/arm/dts/k3-am625-r5-beagleplay.dts       |   9 --
>  arch/arm/dts/k3-am625-r5-sk.dts               |  21 +--
>  arch/arm/dts/k3-am625-sk-u-boot.dtsi          | 145 ------------------
>  arch/arm/dts/k3-am625-sk.dts                  |  27 ++++
>  arch/arm/dts/k3-am625-verdin-r5.dts           |   9 --
>  .../dts/k3-am625-verdin-wifi-dev-u-boot.dtsi  |  55 +------
>  arch/arm/dts/k3-am62x-sk-common.dtsi          | 109 ++++++++++++-
>  15 files changed, 197 insertions(+), 348 deletions(-)

Thanks!

Cheers

Marcel

Re: [PATCH V2 0/4] arm: dts: k3-am625*: Upgrade kernel dts to v6.7-rc1

[Mattijs Korpershoek]

Hi Nishanth,

Thank you for the series.

On mar., nov. 14, 2023 at 21:28, Nishanth Menon <nm@ti.com> wrote:

> Hi,
> rev 2 of the series to sync am62 with v6.7-rc1.
>
> Changes:
> - picked up reviews, tested tags.
> - minor commit message correction in patch #4.
>
> Boot logs:
> https://gist.github.com/nmenon/d62c4795c6d3d40c83ba36d1cd047c42
>
> WARNING: This will have  a minor conflict (binman) with:
> https://lore.kernel.org/u-boot/20231104080137.9628-1-nm@ti.com/
>
>
> I haven't had a chance to test this out on verdin (only build tested)
> - going to depend on any checks folks can provide.
>
> V1: https://lore.kernel.org/all/20231113145919.1928812-1-nm@ti.com/
>
> Nishanth Menon (4):
>   arm: dts: k3-am625*: Sync with kernel v6.7-rc1
>   arm: dts: k3-am625: Drop SoC provided bootph params from board
>     u-boot/r5 dtsi
>   arm: dts: k3-am625-beagleplay-u-boot: drop duplicate bootph-nodes
>   arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes

Boot tested eMMC boot on AM62 SK EVM.

For the whole series:

Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # am625 sk

>
>  arch/arm/dts/k3-am62-main.dtsi                |  12 +-
>  arch/arm/dts/k3-am62-mcu.dtsi                 |   2 +
>  arch/arm/dts/k3-am62-verdin-wifi.dtsi         |   6 +
>  arch/arm/dts/k3-am62-verdin.dtsi              |   1 +
>  arch/arm/dts/k3-am62-wakeup.dtsi              |   2 +
>  arch/arm/dts/k3-am62.dtsi                     |   3 +
>  arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi  | 110 -------------
>  arch/arm/dts/k3-am625-beagleplay.dts          |  34 +++-
>  arch/arm/dts/k3-am625-r5-beagleplay.dts       |   9 --
>  arch/arm/dts/k3-am625-r5-sk.dts               |  21 +--
>  arch/arm/dts/k3-am625-sk-u-boot.dtsi          | 145 ------------------
>  arch/arm/dts/k3-am625-sk.dts                  |  27 ++++
>  arch/arm/dts/k3-am625-verdin-r5.dts           |   9 --
>  .../dts/k3-am625-verdin-wifi-dev-u-boot.dtsi  |  55 +------
>  arch/arm/dts/k3-am62x-sk-common.dtsi          | 109 ++++++++++++-
>  15 files changed, 197 insertions(+), 348 deletions(-)
>
> -- 
> 2.40.0

Re: [PATCH V2 1/4] arm: dts: k3-am625*: Sync with kernel v6.7-rc1

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 296 bytes --]

On Tue, Nov 14, 2023 at 09:28:54PM -0600, Nishanth Menon wrote:

> Sync with kernel v6.7-rc1 and sync up the u-boot dts files accordingly.
> 
> Tested-by: Dhruva Gole <d-gole@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>

For the series, applied to u-boot/next, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]