[PATCH 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support

[Marek Vasut <marek.vasut@gmail.com>]

On 9/18/20 6:03 PM, Biju Das wrote:

[...]

> +++ b/board/hoperun/hihope-rzg2/hihope-rzg2.c
> @@ -0,0 +1,80 @@
[...]
> +#define RST_BASE	0xE6160000
> +#define RST_CA57RESCNT	(RST_BASE + 0x40)
> +#define RST_CODE	0xA5A5000F
> +
> +/* If the firmware passed a device tree use it for U-Boot DRAM setup. */
> +extern u64 rcar_atf_boot_args[];
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void s_init(void)
> +{
> +}

Is this empty function needed ?

> +#ifdef CONFIG_BOARD_EARLY_INIT_F
> +/* Kconfig forces this on, so just return 0 */

I think BOARD_EARLY_INIT_F should really be disabled in Kconfig rather
than implementing empty function here.

> +int board_early_init_f(void)
> +{
> +	return 0;
> +}
> +#endif


[...]

> +int fdtdec_board_setup(const void *fdt_blob)
> +{
> +	void *atf_fdt_blob = (void *)(rcar_atf_boot_args[1]);
> +
> +	if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
> +		fdt_overlay_apply_node((void *)fdt_blob, 0, atf_fdt_blob, 0);
> +
> +	return 0;
> +}

Please use board/renesas/rcar-common/common.c , no need to duplicate the
code.

> +int dram_init(void)
> +{
> +	return fdtdec_setup_mem_size_base();
> +}
> +
> +int dram_init_banksize(void)
> +{
> +	return fdtdec_setup_memory_banksize();
> +}
> +
> +void reset_cpu(ulong addr)
> +{
> +	writel(RST_CODE, RST_CA57RESCNT);
> +}

Isn't there CA53 core in the RZG2 too ?

[...]