[U-Boot] [PATCH 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL

[Kever Yang <kever.yang@rock-chips.com>]

Hi Manivannan,

On 2019/7/24 下午3:59, Peter Robinson wrote:
> On Mon, May 20, 2019 at 4:47 PM Manivannan Sadhasivam
> <manivannan.sadhasivam@linaro.org> wrote:
>> This commits enables booting from eMMC when using SPL on 96Boards
>> Rock960 board by adding SDHCI to boot order. Since the SDHCI driver
>> already has the reloc flag, this works straightaway.
>>
>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>> ---
>>   arch/arm/dts/rk3399-rock960-u-boot.dtsi | 1 +
>>   arch/arm/dts/rk3399-rock960.dts         | 2 ++
>>   2 files changed, 3 insertions(+)
>>
>> diff --git a/arch/arm/dts/rk3399-rock960-u-boot.dtsi b/arch/arm/dts/rk3399-rock960-u-boot.dtsi
>> index 5256f6d3f2..7fb5072a9b 100644
>> --- a/arch/arm/dts/rk3399-rock960-u-boot.dtsi
>> +++ b/arch/arm/dts/rk3399-rock960-u-boot.dtsi
>> @@ -3,4 +3,5 @@
>>    * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
>>    */
>>
>> +#include "rk3399-u-boot.dtsi"
>>   #include "rk3399-sdram-lpddr3-2GB-1600.dtsi"
>> diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts
>> index 7e06bc97e5..c8b9075c73 100644
>> --- a/arch/arm/dts/rk3399-rock960.dts
>> +++ b/arch/arm/dts/rk3399-rock960.dts
>> @@ -12,6 +12,8 @@
>>
>>          chosen {
>>                  stdout-path = "serial2:1500000n8";
>> +               u-boot,spl-boot-order = \
>> +                       &sdhci, &sdmmc;
> Shouldn't this bit be in the rk3399-rock960-u-boot.dtsi not
> rk3399-rock960.dts because it's U-Boot specific?


Peter is correct, all the update to dts by U-Boot should go to 
-u-boot.dtsi now,

could you update and send the patch again?


Thanks,
- Kever
>
>>          };
>>   };
>>
>> --
>> 2.17.1
>>