* [PATCH 1/3] arm: dts: k3-am62*: sync with Linux v6.9-rc5
2024-04-25 12:20 [PATCH 0/3] arm: dts: am62-beagleplay: Fix Beagleplay Ethernet Roger Quadros
@ 2024-04-25 12:20 ` Roger Quadros
2024-04-25 12:20 ` [PATCH 2/3] arm: dts: k3-am625-beagleplay: get CPSW Ethernet to work Roger Quadros
` (2 subsequent siblings)
3 siblings, 0 replies; 11+ messages in thread
From: Roger Quadros @ 2024-04-25 12:20 UTC (permalink / raw)
To: Joe Hershberger, Ramon Fried, Tom Rini, Nishanth Menon,
Robert Nelson, Wadim Egorov, Marcel Ziswiler, Simon Glass
Cc: srk, s-vadapalli, vigneshr, r-gunasekaran, danishanwar, u-boot,
Roger Quadros
Update k3-am62 DT files from Linux v6.9-rc5
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
arch/arm/dts/k3-am62-main.dtsi | 126 ++++++++++++++---
arch/arm/dts/k3-am62-mcu.dtsi | 4 +-
arch/arm/dts/k3-am62-phycore-som.dtsi | 5 +-
arch/arm/dts/k3-am62-thermal.dtsi | 5 +-
arch/arm/dts/k3-am62-wakeup.dtsi | 38 ++++--
arch/arm/dts/k3-am62.dtsi | 4 +-
arch/arm/dts/k3-am625-beagleplay.dts | 58 ++++----
arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 104 +++++++++++++-
arch/arm/dts/k3-am625-sk.dts | 4 +-
arch/arm/dts/k3-am625.dtsi | 4 +-
arch/arm/dts/k3-am62a-main.dtsi | 201 ++++++++++++++++++++++++++--
arch/arm/dts/k3-am62a-mcu.dtsi | 4 +-
arch/arm/dts/k3-am62a-thermal.dtsi | 5 +-
arch/arm/dts/k3-am62a-wakeup.dtsi | 4 +-
arch/arm/dts/k3-am62a.dtsi | 4 +-
arch/arm/dts/k3-am62a7-sk.dts | 162 +++++++++++++++++++++-
arch/arm/dts/k3-am62a7.dtsi | 4 +-
arch/arm/dts/k3-am62x-sk-common.dtsi | 24 +++-
18 files changed, 653 insertions(+), 107 deletions(-)
diff --git a/arch/arm/dts/k3-am62-main.dtsi b/arch/arm/dts/k3-am62-main.dtsi
index e5c64c86d1d..e9cffca073e 100644
--- a/arch/arm/dts/k3-am62-main.dtsi
+++ b/arch/arm/dts/k3-am62-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM625 SoC Family Main Domain peripherals
*
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_main {
@@ -42,9 +42,8 @@
};
};
- main_conf: syscon@100000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x00 0x00100000 0x00 0x20000>;
+ main_conf: bus@100000 {
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x00 0x00100000 0x20000>;
@@ -121,8 +120,13 @@
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
@@ -138,8 +142,13 @@
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x10000>,
+ <0x00 0x484a0000 0x00 0x2000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x1000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
@@ -502,6 +511,9 @@
main_gpio0: gpio@600000 {
compatible = "ti,am64-gpio", "ti,keystone-gpio";
reg = <0x0 0x00600000 0x0 0x100>;
+ gpio-ranges = <&main_pmx0 0 0 32>,
+ <&main_pmx0 32 33 38>,
+ <&main_pmx0 70 72 22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
@@ -520,6 +532,10 @@
compatible = "ti,am64-gpio", "ti,keystone-gpio";
reg = <0x0 0x00601000 0x0 0x100>;
gpio-controller;
+ gpio-ranges = <&main_pmx0 0 94 41>,
+ <&main_pmx0 41 136 6>,
+ <&main_pmx0 47 143 3>,
+ <&main_pmx0 50 149 2>;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <180>, <181>, <182>,
@@ -542,10 +558,9 @@
clock-names = "clk_ahb", "clk_xin";
assigned-clocks = <&k3_clks 57 6>;
assigned-clock-parents = <&k3_clks 57 8>;
+ bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- ti,trm-icp = <0x2>;
- bus-width = <8>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
@@ -563,7 +578,8 @@
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
+ bus-width = <4>;
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -575,8 +591,6 @@
ti,itap-del-sel-sd-hs = <0x1>;
ti,itap-del-sel-sdr12 = <0xa>;
ti,itap-del-sel-sdr25 = <0x1>;
- ti,clkbuf-sel = <0x7>;
- bus-width = <4>;
status = "disabled";
};
@@ -587,7 +601,8 @@
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
+ bus-width = <4>;
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -599,7 +614,6 @@
ti,itap-del-sel-sd-hs = <0xa>;
ti,itap-del-sel-sdr12 = <0xa>;
ti,itap-del-sel-sdr25 = <0x1>;
- ti,clkbuf-sel = <0x7>;
status = "disabled";
};
@@ -623,6 +637,8 @@
interrupt-names = "host", "peripheral";
maximum-speed = "high-speed";
dr_mode = "otg";
+ snps,usb2-gadget-lpm-disable;
+ snps,usb2-lpm-disable;
};
};
@@ -646,6 +662,8 @@
interrupt-names = "host", "peripheral";
maximum-speed = "high-speed";
dr_mode = "otg";
+ snps,usb2-gadget-lpm-disable;
+ snps,usb2-lpm-disable;
};
};
@@ -675,6 +693,15 @@
};
};
+ gpu: gpu@fd00000 {
+ compatible = "ti,am62-gpu", "img,img-axe";
+ reg = <0x00 0x0fd00000 0x00 0x20000>;
+ clocks = <&k3_clks 187 0>;
+ clock-names = "core";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+ };
+
cpsw3g: ethernet@8000000 {
compatible = "ti,am642-cpsw-nuss";
#address-cells = <2>;
@@ -753,9 +780,10 @@
<0x00 0x30207000 0x00 0x1000>, /* ovr1 */
<0x00 0x30208000 0x00 0x1000>, /* ovr2 */
<0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
- <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+ <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+ <0x00 0x30201000 0x00 0x1000>; /* common1 */
reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2";
+ "ovr1", "ovr2", "vp1", "vp2", "common1";
power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 186 6>,
<&dss_vp1_clk>,
@@ -965,4 +993,66 @@
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
+
+ ti_csi2rx0: ticsi2rx@30102000 {
+ compatible = "ti,j721e-csi2rx-shim";
+ dmas = <&main_bcdma 0 0x4700 0>;
+ dma-names = "rx0";
+ reg = <0x00 0x30102000 0x00 0x1000>;
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ cdns_csi2rx0: csi-bridge@30101000 {
+ compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+ reg = <0x00 0x30101000 0x00 0x1000>;
+ clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+ <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ csi0_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ csi0_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ csi0_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ csi0_port4: port@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+
+ dphy0: phy@30110000 {
+ compatible = "cdns,dphy-rx";
+ reg = <0x00 0x30110000 0x00 0x1100>;
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
};
diff --git a/arch/arm/dts/k3-am62-mcu.dtsi b/arch/arm/dts/k3-am62-mcu.dtsi
index 0e0b234581c..e66d486ef1f 100644
--- a/arch/arm/dts/k3-am62-mcu.dtsi
+++ b/arch/arm/dts/k3-am62-mcu.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM625 SoC Family MCU Domain peripherals
*
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_mcu {
diff --git a/arch/arm/dts/k3-am62-phycore-som.dtsi b/arch/arm/dts/k3-am62-phycore-som.dtsi
index aa43e7407ee..43488cc8bcb 100644
--- a/arch/arm/dts/k3-am62-phycore-som.dtsi
+++ b/arch/arm/dts/k3-am62-phycore-som.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
- * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
+ * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
* Author: Wadim Egorov <w.egorov@phytec.de>
*
* Product homepage:
@@ -317,7 +317,6 @@
&sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
non-removable;
status = "okay";
diff --git a/arch/arm/dts/k3-am62-thermal.dtsi b/arch/arm/dts/k3-am62-thermal.dtsi
index a358757e26f..12ba833002a 100644
--- a/arch/arm/dts/k3-am62-thermal.dtsi
+++ b/arch/arm/dts/k3-am62-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
#include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/dts/k3-am62-wakeup.dtsi b/arch/arm/dts/k3-am62-wakeup.dtsi
index fef76f52a52..23ce1bfda8d 100644
--- a/arch/arm/dts/k3-am62-wakeup.dtsi
+++ b/arch/arm/dts/k3-am62-wakeup.dtsi
@@ -1,10 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM625 SoC Family Wakeup Domain peripherals
*
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
+#include <dt-bindings/bus/ti-sysc.h>
+
&cbass_wakeup {
wkup_conf: syscon@43000000 {
bootph-all;
@@ -21,14 +23,34 @@
};
};
- wkup_uart0: serial@2b300000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x2b300000 0x00 0x100>;
- interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ target-module@2b300050 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x00 0x2b300050 0x00 0x4>,
+ <0x00 0x2b300054 0x00 0x4>,
+ <0x00 0x2b300058 0x00 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ ti,no-reset-on-init;
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 114 0>;
- clock-names = "fclk";
- status = "disabled";
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x2b300000 0x100000>;
+
+ wkup_uart0: serial@0 {
+ compatible = "ti,am64-uart", "ti,am654-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
wkup_i2c0: i2c@2b200000 {
diff --git a/arch/arm/dts/k3-am62.dtsi b/arch/arm/dts/k3-am62.dtsi
index f1e15206e1c..f0781f2bea2 100644
--- a/arch/arm/dts/k3-am62.dtsi
+++ b/arch/arm/dts/k3-am62.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM62 SoC Family
*
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
index 9a6bd0a3c94..a34e0df2ab8 100644
--- a/arch/arm/dts/k3-am625-beagleplay.dts
+++ b/arch/arm/dts/k3-am625-beagleplay.dts
@@ -1,9 +1,9 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* https://beagleplay.org/
*
- * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation
*/
/dts-v1/;
@@ -29,7 +29,6 @@
i2c3 = &main_i2c3;
i2c4 = &wkup_i2c0;
i2c5 = &mcu_i2c0;
- mdio-gpio0 = &mdio0;
mmc0 = &sdhci0;
mmc1 = &sdhci1;
mmc2 = &sdhci2;
@@ -231,27 +230,6 @@
};
};
- /* Workaround for errata i2329 - just use mdio bitbang */
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&mdio0_pins_default>;
- gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */
- <&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpsw3g_phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- cpsw3g_phy1: ethernet-phy@1 {
- reg = <1>;
- reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
- reset-assert-us = <25>;
- reset-deassert-us = <60000>; /* T2 */
- };
- };
};
&main_pmx0 {
@@ -312,8 +290,8 @@
mdio0_pins_default: mdio0-default-pins {
pinctrl-single,pins = <
- AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */
- AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */
+ AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
+ AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
>;
};
@@ -443,7 +421,7 @@
>;
};
- console_pins_default: console-default-pins {
+ main_uart0_pins_default: main-uart0-default-pins {
bootph-all;
pinctrl-single,pins = <
AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
@@ -573,11 +551,13 @@
};
&usbss0 {
+ bootph-all;
ti,vbus-divider;
status = "okay";
};
&usb0 {
+ bootph-all;
dr_mode = "peripheral";
};
@@ -611,8 +591,20 @@
};
&cpsw3g_mdio {
- /* Workaround for errata i2329 - Use mdio bitbang */
- status = "disabled";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio0_pins_default>;
+
+ cpsw3g_phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ cpsw3g_phy1: ethernet-phy@1 {
+ reg = <1>;
+ reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <25>;
+ reset-deassert-us = <60000>; /* T2 */
+ };
};
&main_gpio0 {
@@ -827,7 +819,6 @@
bootph-all;
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
status = "okay";
};
@@ -840,7 +831,6 @@
vmmc-supply = <&vdd_3v3_sd>;
vqmmc-supply = <&vdd_sd_dv>;
- ti,driver-strength-ohm = <50>;
disable-wp;
cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
cd-debounce-delay-ms = <100>;
@@ -852,12 +842,10 @@
vmmc-supply = <&wlan_en>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
- bus-width = <4>;
non-removable;
ti,fails-without-test-cd;
cap-power-off-card;
keep-power-in-suspend;
- ti,driver-strength-ohm = <50>;
assigned-clocks = <&k3_clks 157 158>;
assigned-clock-parents = <&k3_clks 157 160>;
#address-cells = <1>;
@@ -877,7 +865,7 @@
&main_uart0 {
bootph-all;
pinctrl-names = "default";
- pinctrl-0 = <&console_pins_default>;
+ pinctrl-0 = <&main_uart0_pins_default>;
status = "okay";
};
diff --git a/arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts b/arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts
index a438baf542c..a83a9049785 100644
--- a/arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts
+++ b/arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
- * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
+ * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
* Author: Wadim Egorov <w.egorov@phytec.de>
*
* Product homepage:
@@ -35,6 +35,18 @@
standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
};
+ hdmi0: connector-hdmi {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&sii9022_out>;
+ };
+ };
+ };
+
keys {
compatible = "gpio-keys";
autorepeat;
@@ -93,6 +105,37 @@
>;
};
+ hdmi_int_pins_default: hdmi-int-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
+ >;
+ };
+
+ main_dss0_pins_default: main-dss0-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+ AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+ AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+ AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+ AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+ AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+ AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+ AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+ AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+ AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+ AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+ AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+ AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+ AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+ AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+ AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+ AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+ AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+ AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+ AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+ >;
+ };
+
main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
@@ -179,15 +222,36 @@
cpsw3g_phy3: ethernet-phy@3 {
compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
reg = <3>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_dss0_pins_default>;
+ status = "okay";
+};
+
+&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VP2: DPI/HDMI Output */
+ port@1 {
+ reg = <1>;
+
+ dpi1_out: endpoint {
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
+
&main_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
status = "okay";
gpio_exp: gpio-expander@21 {
@@ -201,12 +265,43 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
+ gpio-line-names = "", "GPIO1_CAN0_nEN",
"GPIO2_LED2", "GPIO3_LVDS_GPIO",
"GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
"GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
};
+ sii9022: bridge-hdmi@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_int_pins_default>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sii9022_in: endpoint {
+ remote-endpoint = <&dpi1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ sii9022_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
eeprom@51 {
compatible = "atmel,24c02";
pagesize = <16>;
@@ -239,7 +334,6 @@
vqmmc-supply = <&vddshv5_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
no-1-8-v;
status = "okay";
diff --git a/arch/arm/dts/k3-am625-sk.dts b/arch/arm/dts/k3-am625-sk.dts
index b18092497c9..ae81ebb39d0 100644
--- a/arch/arm/dts/k3-am625-sk.dts
+++ b/arch/arm/dts/k3-am625-sk.dts
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* AM625 SK: https://www.ti.com/lit/zip/sprr448
*
- * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
diff --git a/arch/arm/dts/k3-am625.dtsi b/arch/arm/dts/k3-am625.dtsi
index 4193c2b3eed..4014add6320 100644
--- a/arch/arm/dts/k3-am625.dtsi
+++ b/arch/arm/dts/k3-am625.dtsi
@@ -1,10 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM625 SoC family in Quad core configuration
*
* TRM: https://www.ti.com/lit/pdf/spruiv7
*
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
diff --git a/arch/arm/dts/k3-am62a-main.dtsi b/arch/arm/dts/k3-am62a-main.dtsi
index 4ae7fdc5221..aa1e057082f 100644
--- a/arch/arm/dts/k3-am62a-main.dtsi
+++ b/arch/arm/dts/k3-am62a-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM62A SoC Family Main Domain peripherals
*
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_main {
@@ -42,9 +42,8 @@
};
};
- main_conf: syscon@100000 {
- compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
- reg = <0x00 0x00100000 0x00 0x20000>;
+ main_conf: bus@100000 {
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x20000>;
@@ -101,8 +100,13 @@
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
ti,sci = <&dmsc>;
@@ -117,8 +121,13 @@
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x10000>,
+ <0x00 0x484a0000 0x00 0x2000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x1000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
ti,sci = <&dmsc>;
@@ -144,6 +153,44 @@
};
};
+ dmss_csi: bus@4e000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges;
+ ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>;
+
+ ti,sci-dev-id = <198>;
+
+ inta_main_dmss_csi: interrupt-controller@4e0a0000 {
+ compatible = "ti,sci-inta";
+ reg = <0x00 0x4e0a0000 0x00 0x8000>;
+ #interrupt-cells = <0>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ msi-controller;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <200>;
+ ti,interrupt-ranges = <0 237 8>;
+ ti,unmapped-event-sources = <&main_bcdma_csi>;
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_bcdma_csi: dma-controller@4e230000 {
+ compatible = "ti,am62a-dmss-bcdma-csirx";
+ reg = <0x00 0x4e230000 0x00 0x100>,
+ <0x00 0x4e180000 0x00 0x8000>,
+ <0x00 0x4e100000 0x00 0x10000>;
+ reg-names = "gcfg", "rchanrt", "ringrt";
+ msi-parent = <&inta_main_dmss_csi>;
+ #dma-cells = <3>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <199>;
+ ti,sci-rm-range-rchan = <0x21>;
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+ };
+ };
+
dmsc: system-controller@44043000 {
compatible = "ti,k2g-sci";
reg = <0x00 0x44043000 0x00 0xfe0>;
@@ -462,7 +509,7 @@
<193>, <194>, <195>;
interrupt-controller;
#interrupt-cells = <2>;
- ti,ngpio = <87>;
+ ti,ngpio = <92>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 77 0>;
@@ -480,7 +527,7 @@
<183>, <184>, <185>;
interrupt-controller;
#interrupt-cells = <2>;
- ti,ngpio = <88>;
+ ti,ngpio = <52>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 78 0>;
@@ -488,6 +535,24 @@
status = "disabled";
};
+ sdhci0: mmc@fa10000 {
+ compatible = "ti,am62-sdhci";
+ reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
+ clock-names = "clk_ahb", "clk_xin";
+ assigned-clocks = <&k3_clks 57 6>;
+ assigned-clock-parents = <&k3_clks 57 8>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ ti,clkbuf-sel = <0x7>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
+ ti,otap-del-sel-hs200 = <0x6>;
+ status = "disabled";
+ };
+
sdhci1: mmc@fa00000 {
compatible = "ti,am62-sdhci";
reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
@@ -495,7 +560,8 @@
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
+ bus-width = <4>;
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
@@ -507,8 +573,30 @@
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- ti,clkbuf-sel = <0x7>;
+ no-1-8-v;
+ status = "disabled";
+ };
+
+ sdhci2: mmc@fa20000 {
+ compatible = "ti,am62-sdhci";
+ reg = <0x00 0xfa20000 0x00 0x260>, <0x00 0xfa28000 0x00 0x134>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
+ clock-names = "clk_ahb", "clk_xin";
bus-width = <4>;
+ ti,clkbuf-sel = <0x7>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0x0>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-sdr104 = <0x6>;
+ ti,otap-del-sel-ddr50 = <0x9>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
no-1-8-v;
status = "disabled";
};
@@ -876,4 +964,91 @@
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
+
+ ti_csi2rx0: ticsi2rx@30102000 {
+ compatible = "ti,j721e-csi2rx-shim";
+ dmas = <&main_bcdma_csi 0 0x5000 0>;
+ dma-names = "rx0";
+ reg = <0x00 0x30102000 0x00 0x1000>;
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ cdns_csi2rx0: csi-bridge@30101000 {
+ compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+ reg = <0x00 0x30101000 0x00 0x1000>;
+ clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+ <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ csi0_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ csi0_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ csi0_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ csi0_port4: port@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+
+ dphy0: phy@30110000 {
+ compatible = "cdns,dphy-rx";
+ reg = <0x00 0x30110000 0x00 0x1100>;
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ dss: dss@30200000 {
+ compatible = "ti,am62a7-dss";
+ reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+ <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+ <0x00 0x30206000 0x00 0x1000>, /* vid */
+ <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+ <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+ <0x00 0x3020a000 0x00 0x1000>, /* vp1: Tied OFF in the SoC */
+ <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+ <0x00 0x30201000 0x00 0x1000>; /* common1 */
+ reg-names = "common", "vidl1", "vid",
+ "ovr1", "ovr2", "vp1", "vp2", "common1";
+ power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 186 6>,
+ <&k3_clks 186 0>,
+ <&k3_clks 186 2>;
+ clock-names = "fck", "vp1", "vp2";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ dss_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
diff --git a/arch/arm/dts/k3-am62a-mcu.dtsi b/arch/arm/dts/k3-am62a-mcu.dtsi
index a6d16a94088..8c36e56f413 100644
--- a/arch/arm/dts/k3-am62a-mcu.dtsi
+++ b/arch/arm/dts/k3-am62a-mcu.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM625 SoC Family MCU Domain peripherals
*
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_mcu {
diff --git a/arch/arm/dts/k3-am62a-thermal.dtsi b/arch/arm/dts/k3-am62a-thermal.dtsi
index 85ce545633e..c7486fb2a5b 100644
--- a/arch/arm/dts/k3-am62a-thermal.dtsi
+++ b/arch/arm/dts/k3-am62a-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
#include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/dts/k3-am62a-wakeup.dtsi b/arch/arm/dts/k3-am62a-wakeup.dtsi
index 4e8279fa01e..f7bec484705 100644
--- a/arch/arm/dts/k3-am62a-wakeup.dtsi
+++ b/arch/arm/dts/k3-am62a-wakeup.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
*
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_wakeup {
diff --git a/arch/arm/dts/k3-am62a.dtsi b/arch/arm/dts/k3-am62a.dtsi
index 61a210ecd5f..b1b88460029 100644
--- a/arch/arm/dts/k3-am62a.dtsi
+++ b/arch/arm/dts/k3-am62a.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM62A SoC Family
*
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/dts/k3-am62a7-sk.dts b/arch/arm/dts/k3-am62a7-sk.dts
index 8f64ac2c756..f241637a564 100644
--- a/arch/arm/dts/k3-am62a7-sk.dts
+++ b/arch/arm/dts/k3-am62a7-sk.dts
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* AM62A SK: https://www.ti.com/lit/zip/sprr459
*
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
@@ -20,6 +20,7 @@
serial0 = &wkup_uart0;
serial2 = &main_uart0;
serial3 = &main_uart1;
+ mmc0 = &sdhci0;
mmc1 = &sdhci1;
};
@@ -132,6 +133,18 @@
clock-frequency = <12288000>;
};
+ hdmi0: connector-hdmi {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&sii9022_out>;
+ };
+ };
+ };
+
codec_audio: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "AM62Ax-SKEVM";
@@ -181,6 +194,39 @@
};
&main_pmx0 {
+ main_dss0_pins_default: main-dss0-default-pins {
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x100, PIN_OUTPUT, 0) /* (V17) VOUT0_VSYNC */
+ AM62AX_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (T18) VOUT0_HSYNC */
+ AM62AX_IOPAD(0x104, PIN_OUTPUT, 0) /* (AA22) VOUT0_PCLK */
+ AM62AX_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (U17) VOUT0_DE */
+ AM62AX_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+ AM62AX_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (U21) VOUT0_DATA1 */
+ AM62AX_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (U20) VOUT0_DATA2 */
+ AM62AX_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (U19) VOUT0_DATA3 */
+ AM62AX_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (T19) VOUT0_DATA4 */
+ AM62AX_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (U18) VOUT0_DATA5 */
+ AM62AX_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V22) VOUT0_DATA6 */
+ AM62AX_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA7 */
+ AM62AX_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V19) VOUT0_DATA8 */
+ AM62AX_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (V18) VOUT0_DATA9 */
+ AM62AX_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (W22) VOUT0_DATA10 */
+ AM62AX_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA11 */
+ AM62AX_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (W20) VOUT0_DATA12 */
+ AM62AX_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (W19) VOUT0_DATA13 */
+ AM62AX_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y21) VOUT0_DATA14 */
+ AM62AX_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA15 */
+ AM62AX_IOPAD(0x05c, PIN_OUTPUT, 1) /* (P22) GPMC0_AD8.VOUT0_DATA16 */
+ AM62AX_IOPAD(0x060, PIN_OUTPUT, 1) /* (R19) GPMC0_AD9.VOUT0_DATA17 */
+ AM62AX_IOPAD(0x064, PIN_OUTPUT, 1) /* (R20) GPMC0_AD10.VOUT0_DATA18 */
+ AM62AX_IOPAD(0x068, PIN_OUTPUT, 1) /* (R22) GPMC0_AD11.VOUT0_DATA19 */
+ AM62AX_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+ AM62AX_IOPAD(0x070, PIN_OUTPUT, 1) /* (R21) GPMC0_AD13.VOUT0_DATA21 */
+ AM62AX_IOPAD(0x074, PIN_OUTPUT, 1) /* (T20) GPMC0_AD14.VOUT0_DATA22 */
+ AM62AX_IOPAD(0x078, PIN_OUTPUT, 1) /* (T21) GPMC0_AD15.VOUT0_DATA23 */
+ >;
+ };
+
main_uart0_pins_default: main-uart0-default-pins {
pinctrl-single,pins = <
AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
@@ -218,6 +264,22 @@
>;
};
+ main_mmc0_pins_default: main-mmc0-default-pins {
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+ AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
+ AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+ AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+ AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+ AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+ AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+ AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+ AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+ AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+ AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+ >;
+ };
+
main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
@@ -274,6 +336,12 @@
AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
>;
};
+
+ main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
+ >;
+ };
};
&mcu_pmx0 {
@@ -407,6 +475,12 @@
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
"BT_EN_SOC", "MMC1_SD_EN",
@@ -434,6 +508,72 @@
DRVDD-supply = <&vcc_3v3_sys>;
DVDD-supply = <&buck5>;
};
+
+ exp2: gpio@23 {
+ compatible = "ti,tca6424";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "", "",
+ "", "",
+ "", "",
+ "", "",
+ "WL_LT_EN", "CSI_RSTz",
+ "", "",
+ "", "",
+ "", "",
+ "SPI0_FET_SEL", "SPI0_FET_OE",
+ "RGMII2_BRD_CONN_DET", "CSI_SEL2",
+ "CSI_EN", "AUTO_100M_1000M_CONFIG",
+ "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
+ };
+
+ sii9022: bridge-hdmi@3b {
+ compatible = "sil,sii9022";
+ reg = <0x3b>;
+ interrupt-parent = <&exp1>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ #sound-dai-cells = <0>;
+ sil,i2s-data-lanes = < 0 >;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sii9022_in: endpoint {
+ remote-endpoint = <&dpi1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ sii9022_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&main_i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c2_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&sdhci0 {
+ /* eMMC */
+ status = "okay";
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ disable-wp;
};
&sdhci1 {
@@ -442,7 +582,6 @@
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -544,3 +683,20 @@
tx-num-evt = <32>;
rx-num-evt = <32>;
};
+
+&dss {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_dss0_pins_default>;
+};
+
+&dss_ports {
+ /* VP2: DPI Output */
+ port@1 {
+ reg = <1>;
+
+ dpi1_out: endpoint {
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
diff --git a/arch/arm/dts/k3-am62a7.dtsi b/arch/arm/dts/k3-am62a7.dtsi
index 58f1c43edcf..f86a23404e6 100644
--- a/arch/arm/dts/k3-am62a7.dtsi
+++ b/arch/arm/dts/k3-am62a7.dtsi
@@ -1,10 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree Source for AM62A7 SoC family in Quad core configuration
*
* TRM: https://www.ti.com/lit/zip/spruj16
*
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
diff --git a/arch/arm/dts/k3-am62x-sk-common.dtsi b/arch/arm/dts/k3-am62x-sk-common.dtsi
index 19f57ead4eb..3c45782ab2b 100644
--- a/arch/arm/dts/k3-am62x-sk-common.dtsi
+++ b/arch/arm/dts/k3-am62x-sk-common.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Common dtsi for AM62x SK and derivatives
*
- * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <dt-bindings/leds/common.h>
@@ -399,12 +399,18 @@
};
};
+&main_i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c2_pins_default>;
+ clock-frequency = <400000>;
+};
+
&sdhci0 {
bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -414,7 +420,6 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -453,6 +458,7 @@
};
&usbss0 {
+ bootph-all;
status = "okay";
ti,vbus-divider;
};
@@ -463,6 +469,7 @@
};
&usb0 {
+ bootph-all;
#address-cells = <1>;
#size-cells = <0>;
usb-role-switch;
@@ -517,3 +524,12 @@
};
};
};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+ status = "reserved";
+};
+
+&mcu_gpio_intr {
+ status = "reserved";
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread