messages from 2013-05-12 18:20:46 to 2013-05-14 09:51:45 UTC [more...]
[U-Boot] [PATCH v2 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
2013-05-14 9:51 UTC (4+ messages)
` [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
` [U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
` [U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC "
[U-Boot] Your message to U-Boot awaits moderator approval
2013-05-14 9:50 UTC
[U-Boot] [PATCH 0/4] Factorize ARM relocation code
2013-05-14 9:50 UTC (6+ messages)
` [U-Boot] [PATCH v2 0/4] Factorize ARM relocate_code instances
` [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code
` [U-Boot] [PATCH v2 2/4] tx25: "
` [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds
` [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
[U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code
2013-05-14 9:46 UTC (4+ messages)
[U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count
2013-05-14 8:59 UTC (3+ messages)
[U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment
2013-05-14 8:41 UTC
[U-Boot] [PATCH] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment
2013-05-14 8:35 UTC
[U-Boot] Pull request v2: u-boot-blackfin
2013-05-14 6:20 UTC
[U-Boot] [PATCH] arm: fix a comment
2013-05-14 6:20 UTC (4+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board
2013-05-14 4:01 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] mx6qsabreauto: Add Port Expander reset
[U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
2013-05-14 3:52 UTC (3+ messages)
[U-Boot] [PATCH V2 1/2] lcd: add functions to setup up simplefb device tree
2013-05-14 2:33 UTC (2+ messages)
` [U-Boot] [PATCH V2 2/2] ARM: bcm2835: add simplefb DT node during bootz/m
[U-Boot] [PATCH v5 0/4] usb: add Faraday EHCI & Gadget support
2013-05-14 2:29 UTC (28+ messages)
` [U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable
` [U-Boot] [PATCH v6 0/4] usb: add Faraday EHCI & Gadget support
` [U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable
` [U-Boot] [PATCH v7 0/4] usb: add Faraday EHCI & Gadget support
` [U-Boot] [PATCH v7 1/4] usb: hub: make minimum power-on delay configurable
` [U-Boot] [PATCH v8 0/4] usb: add Faraday EHCI & Gadget support
` [U-Boot] [PATCH v8 1/4] usb: hub: make minimum power-on delay configurable
` [U-Boot] [PATCH v8 2/4] usb: ehci: add weak-aliased function for PORTSC
` [U-Boot] [PATCH v8 3/4] usb: ehci: add Faraday USB 2.0 EHCI support
` [U-Boot] [PATCH v8 4/4] usb: gadget: add Faraday FOTG210 USB gadget support
` [U-Boot] [PATCH v7 2/4] usb: ehci: add weak-aliased function for PORTSC
` [U-Boot] [PATCH v7 3/4] usb: ehci: add Faraday USB 2.0 EHCI support
` [U-Boot] [PATCH v7 4/4] usb: gadget: add Faraday FOTG210 USB gadget support
` [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
` [U-Boot] [PATCH v6 3/4] usb: ehci: add Faraday USB 2.0 EHCI support
` [U-Boot] [PATCH v6 4/4] usb: gadget: add Faraday FOTG210 USB gadget support
` [U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
[U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks
2013-05-14 2:22 UTC (6+ messages)
[U-Boot] Question: issues for usb keyboard work with OHCI HCD
2013-05-14 2:13 UTC (7+ messages)
[U-Boot] 2013 Plumber's CFP: Fastboot
2013-05-13 23:51 UTC
[U-Boot] [Patch v2, batch 3 01/17] common: Update cmd_bdinfo for PPC
2013-05-13 22:56 UTC (3+ messages)
` [U-Boot] [Patch v2, batch 3 08/17] powerpc/85xx: fix build error introduced by serdes_get_prtcl
[U-Boot] [Patch v2, batch 2 01/23] powerpc/B4860: Corrected FMAN1 operating frequency print at u-boot
2013-05-13 22:49 UTC (5+ messages)
` [U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support
[U-Boot] [PATCH 1/4] powerpc: Correct im_dprambase cast
2013-05-13 22:40 UTC (8+ messages)
` [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam
` [U-Boot] [PATCH 3/4] ELPPC: Don't write magic numbers via short
` [U-Boot] [PATCH 4/4] mpc8323erdb: Update crc32 check of MAC
[U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module
2013-05-13 22:32 UTC (8+ messages)
` [U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
2013-05-13 22:12 UTC (3+ messages)
[U-Boot] [PATCH] usb: asix: Move software resets to basic_init
2013-05-13 22:10 UTC (4+ messages)
[U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot
2013-05-13 22:09 UTC (3+ messages)
[U-Boot] Please pull u-boot-x86.git
2013-05-13 22:02 UTC
[U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage
2013-05-13 21:58 UTC (6+ messages)
[U-Boot] Fwd: da850-evm: MMC-SD query
2013-05-13 21:49 UTC (3+ messages)
` [U-Boot] "
[U-Boot] [PATCH v1 1/2] blackfin: bf609: implement soft switch
2013-05-13 21:46 UTC (4+ messages)
` [U-Boot] [PATCH v1 2/2] blackfin: bf609: add softswitch config command
[U-Boot] [Patch v2 0/4] ARM: atmel: add sama5d3xek board support
2013-05-13 21:31 UTC (10+ messages)
` [U-Boot] [Patch v2 1/4] USB: ohci-at91: support sama5d3x devices
` [U-Boot] [Patch v2 2/4] NET: macb: "
` [U-Boot] [Patch v2 4/4] ARM: atmel: add sama5d3xek support
[U-Boot] [PULL] please pull u-boot-avr32/master
2013-05-13 19:38 UTC (2+ messages)
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
2013-05-13 19:37 UTC (4+ messages)
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
2013-05-13 19:07 UTC (5+ messages)
[U-Boot] [v2] Please pull u-boot-mpc85xx.git
2013-05-13 18:44 UTC (3+ messages)
[U-Boot] [PATCHv3 0/6] Falcon boot mode for spl_mmc
2013-05-13 18:36 UTC (7+ messages)
` [U-Boot] [PATCHv3 1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging
` [U-Boot] [PATCHv3 2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out
` [U-Boot] [PATCHv3 3/6] spl_mmc: add Falcon mode support for FAT variant
` [U-Boot] [PATCHv3 4/6] spl_mmc: mmc_load_image_raw(): Add sector argument
` [U-Boot] [PATCHv3 5/6] spl_mmc: add Falcon mode support for raw variant
` [U-Boot] [PATCHv3 6/6] am335x: enable falcon boot mode for mmc (raw and fat) and nand
[U-Boot] [PATCH v2 1/7] am33xx/omap3: Clean up gpmc_init slightly
2013-05-13 18:28 UTC (7+ messages)
` [U-Boot] [PATCH v2 2/7] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE
` [U-Boot] [PATCH v2 3/7] am335x_evm: Update SPI_BOOT support, add MTDPARTS info
` [U-Boot] [PATCH v2 4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT
` [U-Boot] [PATCH v2 5/7] am335x_evm: Rework board_is_foo() checks
` [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape
` [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR
[U-Boot] [PATCH 1/3] usb: properly re-initialize the USB keyboard
2013-05-13 18:19 UTC (5+ messages)
` [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd
[U-Boot] [PATCH v02 0/2] OMAP3+: introduce generic Adaptive Body Bias Support
2013-05-13 16:49 UTC (3+ messages)
` [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support
` [U-Boot] [PATCH v02 2/2] OMAP5: add ABB setup for MPU voltage domain
[U-Boot] [PATCH 1/6] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE
2013-05-13 16:10 UTC (17+ messages)
` [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash
` [U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT
` [U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape
` [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR
[U-Boot] [PATCH v1 0/2] OMAP3+: introduce generic Adaptive Body Bias Support
2013-05-13 15:07 UTC (5+ messages)
` [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support
` [U-Boot] [PATCH v1 2/2] OMAP5: add ABB setup for MPU voltage domain
[U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL
2013-05-13 14:47 UTC (4+ messages)
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
2013-05-13 14:30 UTC (7+ messages)
[U-Boot] [PATCH 1/2] usb: Use get_unaligned() in usb_endpoint_maxp() for wMaxPacketSize
2013-05-13 12:03 UTC (6+ messages)
` [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access "
[U-Boot] [PATCH 0/2] Add support for Congatec Conga-QEVAl board
2013-05-13 12:02 UTC
[U-Boot] [PATCH] avr32: fix relocation address calculation
2013-05-13 11:43 UTC (9+ messages)
` [U-Boot] "
[U-Boot] [PATCH] .gitignore: add GNU GLOBAL files
2013-05-13 10:31 UTC (3+ messages)
[U-Boot] [PATCH 0/3] ARM: at91: fix and update README.at91 file
2013-05-13 9:28 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] ARM: at91: fix and update README.at91 document
` [U-Boot] [PATCH 2/3] ARM: at91: add at91sam9x5 and sama5d3x information
` [U-Boot] [PATCH 3/3] ARM: at91: add NAND partition table and index
[U-Boot] [PULL] please pull u-boot-atmel/master
2013-05-13 9:25 UTC (2+ messages)
[U-Boot] [PATCH] Makefile: move the common makefile line out of the CONFIG_SPL_BUILD ifdef
2013-05-13 8:45 UTC
[U-Boot] [PATCH 0/3] ARM: atmel: add sama5d3xek board support
2013-05-13 8:40 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register
` [U-Boot] [PATCH 2/3] USB: ohci-at91: support sama5d3x devices
` [U-Boot] [PATCH 3/3] ARM: atmel: add sama5d3xek support
[U-Boot] [PATCH v2 1/2] blackfin: bf609: implement soft switch
2013-05-13 8:00 UTC (2+ messages)
` [U-Boot] [PATCH v2 2/2] blackfin: bf609: add softswitch config command
[U-Boot] [PATCH v2 1/2] blackfin: bf609: implement soft switch
2013-05-13 7:59 UTC (2+ messages)
` [U-Boot] [PATCH v2 2/2] blackfin: bf609: add softswitch config command
[U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables
2013-05-13 7:45 UTC (3+ messages)
[U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
2013-05-13 6:48 UTC (6+ messages)
` [U-Boot] "
[U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error
2013-05-13 6:14 UTC
[U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API
2013-05-13 6:01 UTC (5+ messages)
` [U-Boot] [PATCH v1 2/3] blackfin: Add memory virtual console to blackfin serial driver
` [U-Boot] [PATCH v1 3/3] blackfin: Uart divisor should be set after their values are generated
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework
2013-05-13 5:41 UTC (6+ messages)
` [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
[U-Boot] [PATCH 0/4 v2] Exynos5: Add cpu freq and tmu throttling
2013-05-13 5:19 UTC (5+ messages)
` [U-Boot] [PATCH 1/4 v2] PMIC: max77686: add pmic_set_voltage api for max77686
` [U-Boot] [PATCH 2/4 v2] Exynos5: cpufreq: Implement frequency scaling for exynos5
` [U-Boot] [PATCH 3/4 v2] smdk5250: enable support for tmu throttling
` [U-Boot] [PATCH 4/4 v2] Exynos5: config: enable cpu freq
[U-Boot] [PATCH 2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5
2013-05-13 5:15 UTC (3+ messages)
` [U-Boot] "
[U-Boot] [PATCH 0/2] EXYNOS: Support a delay after deactivate for SPI
2013-05-13 5:13 UTC (5+ messages)
` [U-Boot] [PATCH 1/2] EXYNOS: Export timer_get_us() to get microsecond timer
[U-Boot] [PATCH 0/4 V4] SMDK5250: FDT: Add device tree support for console
2013-05-13 4:21 UTC (4+ messages)
` [U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console
[U-Boot] Pull request: u-boot-blackfin
2013-05-13 4:11 UTC (5+ messages)
[U-Boot] [PATCH 0/3 V5] EXYNOS5: Add GPIO numbering feature
2013-05-13 4:07 UTC (4+ messages)
` [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin "
[U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common
2013-05-13 3:40 UTC (4+ messages)
` [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm
[U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors
2013-05-13 2:29 UTC (4+ messages)
[U-Boot] [RFC PATCH] patman: Do not hardcode python path
2013-05-13 2:27 UTC (4+ messages)
[U-Boot] [RFC PATCH 0/7] RFC: Add Kbuild system to U-Boot
2013-05-13 2:25 UTC (8+ messages)
` [U-Boot] [RFC PATCH 1/7] Add some required Kconfig files
` [U-Boot] [RFC PATCH 2/7] arm: Allow start.o to come from any directory
` [U-Boot] [RFC PATCH 3/7] Tidy up Makefiles to use COBJS consistently
` [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material
` [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot
` [U-Boot] [RFC PATCH 6/7] Enable Kconfig for U-Boot
` [U-Boot] [RFC PATCH 7/7] Switch over to Kbuild
[U-Boot] [PATCH] wandboard: fix typo in README
2013-05-13 0:22 UTC
[U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot
2013-05-12 18:20 UTC (9+ messages)
` [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox