messages from 2018-09-10 21:49:19 to 2018-09-12 00:42:05 UTC [more...]
[U-Boot] [PATCH v2 19/24] remoteproc: Allow for individual remoteproc initialization
2018-09-12 0:42 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 18/24] spl: Allow mailbox drivers to be used within SPL
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 17/24] mailbox: Introduce K3 Secure Proxy Driver
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 16/24] mailbox: Allow attaching private data for mbox_chan
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 15/24] sysreset: Add TI System Control Interface (TI SCI) sysreset driver
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 14/24] power domain: Introduce TI System Control Interface (TI SCI) power domain driver
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 13/24] power domain: Add support for multiple powerdomains per device
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 12/24] clk: Introduce TI System Control Interface (TI SCI) clock driver
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 11/24] clk: Extend clock control with an optional data field
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 10/24] reset: Introduce TI System Control Interface (TI SCI) reset driver
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 09/24] reset: Extend reset control with an optional data field
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 08/24] dm: reset: Update uclass to allow querying reset status
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 07/24] dm: firmware: Automatically bind child devices
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 06/24] firmware: ti_sci: Add support for processor control services
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 05/24] firmware: ti_sci: Add support for reboot core service
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 04/24] firmware: ti_sci: Add support for clock control
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 03/24] firmware: ti_sci: Add support for device control
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 02/24] firmware: ti_sci: Add support for board configuration
2018-09-12 0:41 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 01/24] firmware: Add basic support for TI System Control Interface (TI SCI) protocol
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 8/8] armv8: K3: am654: Add support for generating build targets
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 7/8] armv8: K3: am654: Introduce FIT generator script
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 6/8] armv8: K3: am654: Add custom MMU support
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 5/8] arm: K3: am654: Unlock control module registers during init
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 4/8] arm: K3: am654: Add support for boot device detection
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 3/8] arm: K3: Update _start instruction
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot,v2,3/8] "
[U-Boot] [PATCH v2 2/8] arm: K3: Add support for AM654 SoC definition
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs
2018-09-12 0:40 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [GIT PULL] FPGA changes for v2018.11
2018-09-12 0:40 UTC
[U-Boot] [GIT PULL] u-boot-uniphier/master
2018-09-12 0:40 UTC (2+ messages)
[U-Boot] [PATCH v3] arm: socfpga: stratix10: Add CONFIG_OF_EMBED
2018-09-12 0:25 UTC
[U-Boot] [PATCH 0/3] add optional hex output of u-boot-spl
2018-09-12 0:07 UTC (11+ messages)
` [U-Boot] [PATCH 1/3] common: add spl/u-boot-spl.hex target
` [U-Boot] [PATCH 2/3] arm: socfpga: stratix10: add CONFIG_SPL_TARGET
` [U-Boot] [PATCH 3/3] arm; socfpga: stratix10: Add CONFIG_OF_EMBED
[U-Boot] [PATCH 0/3] Support for the Aspeed ast2500 FMC/SPI controllers
2018-09-11 22:39 UTC (8+ messages)
` [U-Boot] [PATCH 1/3] aspeed: ast2500: Add AHB clock
` [U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers
[U-Boot] [PATCH v3 0/13] efi_loader: EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL
2018-09-11 22:05 UTC (17+ messages)
` [U-Boot] [PATCH v3 01/13] efi_loader: support Unicode text input
` [U-Boot] [PATCH v4 "
` [U-Boot] [PATCH v5 1/13] "
` [U-Boot] [PATCH v3 02/13] test/py: Unicode w/ EFI_SIMPLE_TEXT_INPUT_PROTOCOL
` [U-Boot] [PATCH v3 03/13] efi_selftest: refactor text input test
` [U-Boot] [PATCH v3 04/13] efi_loader: rework event handling for console
` [U-Boot] [PATCH v3 05/13] efi_selftest: use WaitForKey to test text input
` [U-Boot] [PATCH v3 06/13] test/py: rework test_efi_selftest_text_input()
` [U-Boot] [PATCH v3 07/13] efi_loader: EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL
` [U-Boot] [PATCH v3 08/13] efi_loader: support modifiers for F1 - F4
` [U-Boot] [PATCH v3 09/13] efi_selftest: test EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL
` [U-Boot] [PATCH v3 10/13] test/py: "
` [U-Boot] [PATCH v3 11/13] efi_loader: implement key notify functions
` [U-Boot] [PATCH v3 12/13] efi_selftest: test key notification functions
` [U-Boot] [PATCH v3 13/13] efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION
[U-Boot] Renesas R-Car Gen3 SD/MMC driver issues
2018-09-11 19:48 UTC
[U-Boot] [Patch v3] socfpga: stratix10: fix sdram_calculate_size
2018-09-11 17:38 UTC (2+ messages)
[U-Boot] [PATCH v3 0/5] Add get_alt_function ops
2018-09-11 17:03 UTC (9+ messages)
` [U-Boot] [Uboot-stm32] "
[U-Boot] [PATCH v1 0/4] MIPS: optimise cache initialization
2018-09-11 15:53 UTC (6+ messages)
` [U-Boot] [PATCH v1 1/4] MIPS: cache: reimplement dcache_[status, enable, disable]
[U-Boot] [PATCH] socfpga: stratix10: fix sdram_calculate_size
2018-09-11 15:35 UTC (6+ messages)
[U-Boot] [Patch v2] socfpga: stratix10: fix sdram_calculate_size
2018-09-11 15:30 UTC (2+ messages)
[U-Boot] [PATCH V3 1/2] pci: Support parsing PCI controller DT subnodes
2018-09-11 12:58 UTC (2+ messages)
` [U-Boot] [PATCH V3 2/2] pci: Update documentation to make 'compatible' string optional
[U-Boot] [PATCH] cmd: part: use MAX_SEARCH_PARTITIONS for part search
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm: armv7m: clean up armv7m unified code compilation
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm: armv7m: remove un-necessary If then instruction
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm: stm32: Remove redundant thumb build selection
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm: spear: enable GPIO3 and 4 clocks when the GPIO controller driver is built
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] tools: mkimage: Ensure munmap unmaps the same length that was mapped
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3] serial: omap: Introduce DM specific omap serial
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] omap3: pandora: Enable DM_SERIAL
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2 2/2] board: arm: Add support for Broadcom BCM7260
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 1/2] arm: bcm7445: Change serial console index
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH] ARM: CPU: arm926ejs: Consolidate cache routines to common file
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] serial: arm_dcc: Add DCC support for V7R based cores
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] pinctrl: Fix build warning with ARM64
2018-09-11 12:26 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 4/4] dm: omap-timer: Update clock rate only if not populated
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 3/4] dm: omap-timer: Use 64bit for counter values
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH V4 2/2] mmc: fsl_esdhc: enable HS400 feature
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot,V4,2/2] "
[U-Boot] [PATCH V4 1/2] mmc: add HS400 support
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot,V4,1/2] "
[U-Boot] [PATCH 2/2] at91: fix devicetree warnings
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot,2/2] "
[U-Boot] [PATCH 1/2] ARM: dts: Makefile: fix build for at91family
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] gpio: stm32f7: replace ODR update by BSRR write
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2 u-boot 2/2] clk: clk_meson: Add mux and div support for reparent and rate setting
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, u-boot, "
[U-Boot] [PATCH v2 u-boot 1/2] power: domain: Add the VPU Power Domain driver
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, u-boot, "
[U-Boot] [PATCH 3/3] Remove <inttypes.h> includes and PRI* usages in printf() entirely
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 2/3] arch: types.h: factor out fixed width typedefs to int-ll64.h
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/3] Remove CONFIG_USE_STDINT
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] [U-Boot,1/3] "
[U-Boot] [PATCH] arm: armv7-a: Compile and tune for armv7-a instead of armv5
2018-09-11 12:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3 4/4] sandbox: Add serial test
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] [U-Boot,v3,4/4] "
[U-Boot] [PATCH v3 3/4] dm: serial: Remove setparity ops
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] [U-Boot,v3,3/4] "
[U-Boot] [PATCH v3 2/4] serial: stm32: Replace setparity by setconfig
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 1/4] dm: serial: Replace setparity by setconfig
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH 4/4] cli: handle getch error
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] [U-Boot,4/4] "
[U-Boot] [PATCH 3/4] console: unify fgetc function when console MUX is deactivated
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 2/4] serial: protect access to serial rx buffer
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/4] stm32mp1: activate serial rx buffer
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] [U-Boot,1/4] "
[U-Boot] [PATCH] include/version.h: workaround sysroot inc order
2018-09-11 12:24 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3 00/26] subject: fs: fat: extend FAT write operations
2018-09-11 11:09 UTC (28+ messages)
` [U-Boot] [PATCH v3 01/26] fs: fat: guard the content of include/fat.h
` [U-Boot] [PATCH v3 02/26] fs: fat: extend get_fs_info() for write use
` [U-Boot] [PATCH v3 03/26] fs: fat: handle "." and ".." of root dir correctly with fat_itr_resolve()
` [U-Boot] [PATCH v3 04/26] fs: fat: assure iterator's ->dent belongs to ->clust
` [U-Boot] [PATCH v3 05/26] Revert "fs: fat: cannot write to subdirectories"
` [U-Boot] [PATCH v3 06/26] fs: fat: check and normalize file name
` [U-Boot] [PATCH v3 07/26] fs: fat: write returns error code instead of -1
` [U-Boot] [PATCH v3 08/26] fs: fat: support write with sub-directory path
` [U-Boot] [PATCH v3 09/26] fs: fat: refactor write interface for a file offset
` [U-Boot] [PATCH v3 10/26] fs: fat: support write with non-zero offset
` [U-Boot] [PATCH v3 11/26] cmd: fat: add offset parameter to fatwrite
` [U-Boot] [PATCH v3 12/26] fs: add mkdir interface
` [U-Boot] [PATCH v3 13/26] fs: fat: remember the starting cluster number of directory
` [U-Boot] [PATCH v3 14/26] fs: fat: support mkdir
` [U-Boot] [PATCH v3 15/26] cmd: fat: add fatmkdir command
` [U-Boot] [PATCH v3 16/26] efi_loader: file: support creating a directory
` [U-Boot] [PATCH v3 17/26] fs: add unlink interface
` [U-Boot] [PATCH v3 18/26] fs: fat: support unlink
` [U-Boot] [PATCH v3 19/26] cmd: fat: add fatrm command
` [U-Boot] [PATCH v3 20/26] efi_loader: implement a file delete
` [U-Boot] [PATCH v3 21/26] fs-test: fix false positive error at Test Case 12
` [U-Boot] [PATCH v3 22/26] fs-test: update the test result as of v2018.09
` [U-Boot] [PATCH v3 23/26] test/py: convert fs-test.sh to pytest
` [U-Boot] [PATCH v3 24/26] test/py: fs: add extended write operation test
` [U-Boot] [PATCH v3 25/26] test/py: fs: add fstest/mkdir test
[U-Boot] [PATCH] ARM: socfpga: Enable DCache on Arria10
2018-09-11 10:56 UTC
[U-Boot] PBIAS driver and MMC Interaction in U-Boot Question
2018-09-11 10:45 UTC (3+ messages)
[U-Boot] [PATCH v3 0/5] Add a pinctrl driver for Merrifield to pinmux I2C#6
2018-09-11 10:31 UTC (6+ messages)
` [U-Boot] [PATCH v3 1/5] x86: cpu: introduce scu_ipc_raw_command()
` [U-Boot] [PATCH v3 2/5] x86: tangier: pinmux: add API to configure protected pins
` [U-Boot] [PATCH v3 3/5] x86: dts: edison: configure I2C#6 pins
` [U-Boot] [PATCH v3 4/5] x86: tangier: acpi: add I2C6 node
` [U-Boot] [PATCH v3 5/5] x86: cpu: add docstring to scu_ipc_command()
[U-Boot] [PATCH] linux/compat.h: Add netdev_### log macros
2018-09-11 10:05 UTC (3+ messages)
[U-Boot] [PATCH 0/3] socfpga: clean up sfp generation
2018-09-11 9:43 UTC (3+ messages)
` [U-Boot] [PATCH 1/3] spl: socfpga: remove "
[U-Boot] [PATCH v2 0/13] efi_loader: EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL
2018-09-11 7:52 UTC (3+ messages)
` [U-Boot] [PATCH v2 01/13] efi_loader: support Unicode text input
[U-Boot] [RFC PATCH v1 0/2] Fix to keystone2 uinitrd fixup logic
2018-09-11 7:36 UTC (3+ messages)
` [U-Boot] [RFC PATCH v1 1/2] fdt: add call to ft_board_setup_ex() for ks2 boards
` [U-Boot] [RFC PATCH v1 2/2] board: ks2: move uinitrd fixup logic inside ft_board_setup_ex
[U-Boot] [PATCH v3 26/26] test/py: fs: add fstest/unlink test
2018-09-11 7:06 UTC
[U-Boot] [PATCH 0/5] Support for the Faraday ftgmac100 controller
2018-09-11 5:37 UTC (4+ messages)
` [U-Boot] [PATCH 5/5] aspeed: Activate ethernet devices on the ast2500 Eval Board
[U-Boot] [RESEND PATCH v2 00/15] riscv: Add QEMU virt board support
2018-09-11 4:54 UTC (16+ messages)
` [U-Boot] [RESEND PATCH v2 01/15] riscv: kconfig: Normalize architecture name spelling
` [U-Boot] [RESEND PATCH v2 02/15] riscv: Remove setup.h
` [U-Boot] [RESEND PATCH v2 03/15] riscv: bootm: Correct the 1st kernel argument to hart id
` [U-Boot] [RESEND PATCH v2 04/15] riscv: Remove mach type
` [U-Boot] [RESEND PATCH v2 05/15] riscv: Move the linker script to the CPU root directory
` [U-Boot] [RESEND PATCH v2 06/15] riscv: Fix coding style issues in the linker script
` [U-Boot] [RESEND PATCH v2 07/15] riscv: Explicitly pass -march and -mabi to the compiler
` [U-Boot] [RESEND PATCH v2 08/15] riscv: Add a helper routine to print CPU information
` [U-Boot] [RESEND PATCH v2 09/15] riscv: Remove CSR read/write defines in encoding.h
` [U-Boot] [RESEND PATCH v2 10/15] riscv: bootm: Pass mhartid CSR value to kernel
` [U-Boot] [RESEND PATCH v2 11/15] riscv: Make start.S available for all targets
` [U-Boot] [RESEND PATCH v2 12/15] riscv: ae350: Clean up mixed tabs and spaces in the dts
` [U-Boot] [RESEND PATCH v2 13/15] riscv: kconfig: Select DM and OF_CONTROL
` [U-Boot] [RESEND PATCH v2 14/15] riscv: Add QEMU virt board support
` [U-Boot] [RESEND PATCH v2 15/15] riscv: Move do_reset() to a common place
[U-Boot] [PATCH v2 00/15] riscv: Add QEMU virt board support
2018-09-11 4:37 UTC (16+ messages)
` [U-Boot] [PATCH v2 01/15] riscv: kconfig: Normalize architecture name spelling
` [U-Boot] [PATCH v2 02/15] riscv: Remove setup.h
` [U-Boot] [PATCH v2 03/15] riscv: bootm: Correct the 1st kernel argument to hart id
` [U-Boot] [PATCH v2 04/15] riscv: Remove mach type
` [U-Boot] [PATCH v2 05/15] riscv: Move the linker script to the CPU root directory
` [U-Boot] [PATCH v2 06/15] riscv: Fix coding style issues in the linker script
` [U-Boot] [PATCH v2 07/15] riscv: Explicitly pass -march and -mabi to the compiler
` [U-Boot] [PATCH v2 08/15] riscv: Add a helper routine to print CPU information
` [U-Boot] [PATCH v2 09/15] riscv: Remove CSR read/write defines in encoding.h
` [U-Boot] [PATCH v2 10/15] riscv: bootm: Pass mhartid CSR value to kernel
` [U-Boot] [PATCH v2 11/15] riscv: Make start.S available for all targets
` [U-Boot] [PATCH v2 12/15] riscv: ae350: Clean up mixed tabs and spaces in the dts
` [U-Boot] [PATCH v2 13/15] riscv: kconfig: Select DM and OF_CONTROL
` [U-Boot] [PATCH v2 14/15] riscv: Add QEMU virt board support
` [U-Boot] [PATCH v2 15/15] riscv: Move do_reset() to a common place
[U-Boot] [RFC PATCH 1/2] Makefile: Use -fno-strict-aliasing globally
2018-09-11 1:54 UTC (4+ messages)
` [U-Boot] [RFC PATCH 2/2] config.mk: Remove duplicated -fno-strict-aliasing
[U-Boot] [ANN] U-Boot v2018.09 released
2018-09-10 21:49 UTC
[U-Boot] [PATCH] .travis.yml: Fix typo in sun7i job description
2018-09-10 21:49 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] mtd: nand: denali: fix unaligned cache operation warnings on ARMv7 SoCs
2018-09-10 21:49 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox