U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 5/5] mtd: nand: mxs_nand: add minimal ECC support
Date: Fri, 22 Jun 2018 10:46:45 +0200	[thread overview]
Message-ID: <cbefd969-afc4-2cfa-761a-08db201ca802@denx.de> (raw)
In-Reply-To: <87bfabb3-7cfa-4890-fd1b-21613626283f@denx.de>

Hi Stefan,

On 21/06/2018 18:39, Stefano Babic wrote:
> Hi Stefan,
> 
> On 21/06/2018 17:22, Tom Rini wrote:
>> On Thu, Jun 21, 2018 at 01:46:10PM +0200, Stefan Agner wrote:
>>
>>> Tom, Stefano,
>>>
>>> Scott Wood seems not to be very active this days in the U-Boot
>>> community.
>>>
>>> This patchsets seem all to be blocked due to that:
>>> https://patchwork.ozlabs.org/cover/897263/
>>> https://patchwork.ozlabs.org/cover/901995/
>>> https://patchwork.ozlabs.org/patch/922907/
>>>
>>> Those patches have been around quite a while and I tested them well. Any
>>> change to get that still in?
>>
>> I don't object to those coming in via one of the SoC trees, thanks!
>>
> 
> Ok - we have a general agreement, I pick your patches into u-boot-imx.
> 

I get several broken boards and many warnings when I build with your
patches. Maybe have I missed some of them ? I have pushed a temporary
branch (nand-imx) on the server, let me know if I miss something.

There are 15 boards broken, errors seem trivial but I do not want to fix
anything without showing to you. There are mainly two issues, for example:

drivers/mtd/nand/mxs_nand_spl.c: In function ?mxs_nand_init?:
drivers/mtd/nand/mxs_nand_spl.c:148:2: error: too many arguments to
function ?board_nand_init?
  board_nand_init(&nand_chip);
  ^~~~~~~~~~~~~~~
In file included from drivers/mtd/nand/mxs_nand_spl.c:7:0:
include/nand.h:39:6: note: declared here
 void board_nand_init(void);
      ^~~~~~~~~~~~~~~
make[4]: *** [spl/drivers/mtd/nand/mxs_nand_spl.o] Error 1
make[3]: *** [spl/drivers/mtd/nand] Error 2
make[2]: *** [spl/drivers] Error 2
make[1]: *** [spl/u-boot-spl] Error 2
make: *** [sub-make] Error 2


The second one is a missing include, like in mx28evk:


drivers/mtd/nand/mxs_nand.c: In function ?mxs_nand_calc_ecc_layout_by_info?:
drivers/mtd/nand/mxs_nand.c:172:7: error: ?SZ_512? undeclared (first use
in this function)
  case SZ_512:
       ^~~~~~
drivers/mtd/nand/mxs_nand.c:172:7: note: each undeclared identifier is
reported only once for each function it appears in
drivers/mtd/nand/mxs_nand.c:175:7: error: ?SZ_1K? undeclared (first use
in this function)
  case SZ_1K:
       ^~~~~
make[2]: *** [drivers/mtd/nand/mxs_nand.o] Error 1
make[1]: *** [drivers/mtd/nand] Error 2
make: *** [sub-make] Error 2

Can you take a look ?

Thanks,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

  reply	other threads:[~2018-06-22  8:46 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-11 16:04 [U-Boot] [PATCH v3 0/5] mtd: nand: mxs_nand: improve ECC support Stefan Agner
2018-04-11 16:04 ` [U-Boot] [PATCH v3 1/5] mtd: nand: mxs_nand: use self init Stefan Agner
2018-04-11 16:04 ` [U-Boot] [PATCH v3 2/5] mtd: nand: mxs_nand: allow to enable BBT support Stefan Agner
2018-04-11 16:04 ` [U-Boot] [PATCH v3 3/5] mtd: nand: mxs_nand: use structure for BCH geometry Stefan Agner
2018-04-11 16:04 ` [U-Boot] [PATCH v3 4/5] mtd: nand: mxs_nand: report correct ECC parameters Stefan Agner
2018-04-11 16:04 ` [U-Boot] [PATCH v3 5/5] mtd: nand: mxs_nand: add minimal ECC support Stefan Agner
2018-04-27  7:31   ` Stefano Babic
2018-04-30  8:08     ` Stefan Agner
2018-05-30 14:51       ` Stefan Agner
2018-06-21 11:46         ` Stefan Agner
2018-06-21 15:22           ` Tom Rini
2018-06-21 16:39             ` Stefano Babic
2018-06-22  8:46               ` Stefano Babic [this message]
2018-06-22 11:36                 ` Stefan Agner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cbefd969-afc4-2cfa-761a-08db201ca802@denx.de \
    --to=sbabic@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox