[PATCH v2 0/4] arm64: imx8mq/imx8mm: cleanup binman configuration

[PATCH v2 0/4] arm64: imx8mq/imx8mm: cleanup binman configuration

[Patrick Wildt]

The i.MX8MM boards have been converted for some longer time compared
to i.MX8MQ.  During that time the i.MX8MM binman configuration has
already gotten some cleanup.  This brings the i.MX8MQ binman config
in line with the i.MX8MM one, and also fixes node names in the i.MX8MM
config.

Changes since v1:
- Underscores in node names replaced with dashes.

Patrick Wildt (4):
  arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties
  arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename
  arm64: dts: imx8mm-u-boot.dtsi: use dash for node names
  arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming

 arch/arm/dts/imx8mm-u-boot.dtsi | 12 +++----
 arch/arm/dts/imx8mq-u-boot.dtsi | 59 +++++++++++++++++++--------------
 2 files changed, 40 insertions(+), 31 deletions(-)

-- 
2.34.1

[PATCH v2 1/4] arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties

[Patrick Wildt]

Alphabetically re-order properties.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
---
 arch/arm/dts/imx8mq-u-boot.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index 8a6075c77b..d8208ae7b0 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -12,10 +12,10 @@
 
 &binman {
 	u-boot-spl-ddr {
+		align = <4>;
+		align-size = <4>;
 		filename = "u-boot-spl-ddr.bin";
 		pad-byte = <0xff>;
-		align-size = <4>;
-		align = <4>;
 
 		u-boot-spl {
 			align-end = <4>;
@@ -69,16 +69,16 @@
 
 		fit {
 			description = "Configuration to load ATF before U-Boot";
-			#address-cells = <1>;
 			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+			#address-cells = <1>;
 
 			images {
 				uboot {
-					description = "U-Boot (64-bit)";
-					type = "standalone";
 					arch = "arm64";
 					compression = "none";
+					description = "U-Boot (64-bit)";
 					load = <CONFIG_SYS_TEXT_BASE>;
+					type = "standalone";
 
 					uboot_blob: blob-ext {
 						filename = "u-boot-nodtb.bin";
@@ -86,12 +86,12 @@
 				};
 
 				atf {
-					description = "ARM Trusted Firmware";
-					type = "firmware";
 					arch = "arm64";
 					compression = "none";
-					load = <0x910000>;
+					description = "ARM Trusted Firmware";
 					entry = <0x910000>;
+					load = <0x910000>;
+					type = "firmware";
 
 					atf_blob: blob-ext {
 						filename = "bl31.bin";
@@ -99,9 +99,9 @@
 				};
 
 				fdt {
+					compression = "none";
 					description = "NAME";
 					type = "flat_dt";
-					compression = "none";
 
 					uboot_fdt_blob: blob-ext {
 						filename = "u-boot.dtb";
@@ -114,9 +114,9 @@
 
 				conf {
 					description = "NAME";
+					fdt = "fdt";
 					firmware = "uboot";
 					loadables = "atf";
-					fdt = "fdt";
 				};
 			};
 		};
@@ -127,13 +127,13 @@
 		pad-byte = <0x00>;
 
 		spl: blob-ext@1 {
-			offset = <0x0>;
 			filename = "spl.bin";
+			offset = <0x0>;
 		};
 
 		uboot: blob-ext@2 {
-			offset = <0x57c00>;
 			filename = "u-boot.itb";
+			offset = <0x57c00>;
 		};
 	};
 };
-- 
2.34.1

Re: [PATCH v2 1/4] arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties

[Fabio Estevam]

On 13/01/2022 11:21, Patrick Wildt wrote:

> 
>  		fit {
>  			description = "Configuration to load ATF before U-Boot";
> -			#address-cells = <1>;
>  			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> +			#address-cells = <1>;
> 
>  			images {
>  				uboot {
> -					description = "U-Boot (64-bit)";

Personally, I prefer the 'description' property being the first one, but 
to
keep consistency with imx8mm, let's go this route then.


Reviewed-by: Fabio Estevam <festevam@denx.de>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: 
festevam@denx.de

[PATCH v2 2/4] arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename

[Patrick Wildt]

Explicitly add SPL aka u-boot-spl.bin filename.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
---
 arch/arm/dts/imx8mq-u-boot.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index d8208ae7b0..566b8b8035 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -19,6 +19,7 @@
 
 		u-boot-spl {
 			align-end = <4>;
+			filename = "u-boot-spl.bin";
 		};
 
 		blob_1: blob-ext@1 {
-- 
2.34.1

Re: [PATCH v2 2/4] arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename

[Fabio Estevam]

On 13/01/2022 11:21, Patrick Wildt wrote:
> Explicitly add SPL aka u-boot-spl.bin filename.
> 
> Signed-off-by: Patrick Wildt <patrick@blueri.se>

Reviewed-by: Fabio Estevam <festevam@denx.de>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: 
festevam@denx.de

[PATCH v2 3/4] arm64: dts: imx8mm-u-boot.dtsi: use dash for node names

[Patrick Wildt]

Some of the nodes were named using a underscore, so rectify this and
consistenly use dashes.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
---
 arch/arm/dts/imx8mm-u-boot.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 7882fe7316..3ea03a96d6 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -45,19 +45,19 @@
 			type = "blob-ext";
 		};
 
-		1d_dmem {
+		1d-dmem {
 			filename = "lpddr4_pmu_train_1d_dmem.bin";
 			size = <0x4000>;
 			type = "blob-ext";
 		};
 
-		2d_imem {
+		2d-imem {
 			filename = "lpddr4_pmu_train_2d_imem.bin";
 			size = <0x8000>;
 			type = "blob-ext";
 		};
 
-		2d_dmem {
+		2d-dmem {
 			filename = "lpddr4_pmu_train_2d_dmem.bin";
 			size = <0x4000>;
 			type = "blob-ext";
@@ -93,7 +93,7 @@
 					load = <CONFIG_SYS_TEXT_BASE>;
 					type = "standalone";
 
-					uboot_blob {
+					uboot-blob {
 						filename = "u-boot-nodtb.bin";
 						type = "blob-ext";
 					};
@@ -107,7 +107,7 @@
 					load = <0x920000>;
 					type = "firmware";
 
-					atf_blob {
+					atf-blob {
 						filename = "bl31.bin";
 						type = "blob-ext";
 					};
@@ -126,7 +126,7 @@
 					description = "NAME";
 					type = "flat_dt";
 
-					uboot_fdt_blob {
+					uboot-fdt-blob {
 						filename = "u-boot.dtb";
 						type = "blob-ext";
 					};
-- 
2.34.1

Re: [PATCH v2 3/4] arm64: dts: imx8mm-u-boot.dtsi: use dash for node names

[Fabio Estevam]

On 13/01/2022 11:22, Patrick Wildt wrote:
> Some of the nodes were named using a underscore, so rectify this and
> consistenly use dashes.
> 
> Signed-off-by: Patrick Wildt <patrick@blueri.se>

Reviewed-by: Fabio Estevam <festevam@denx.de>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: 
festevam@denx.de

Re: [PATCH v2 3/4] arm64: dts: imx8mm-u-boot.dtsi: use dash for node names

[Marcel Ziswiler]

On Thu, 2022-01-13 at 15:22 +0100, Patrick Wildt wrote:
> Some of the nodes were named using a underscore, so rectify this and
> consistenly use dashes.
> 
> Signed-off-by: Patrick Wildt <patrick@blueri.se>

Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[snip]

[PATCH v2 4/4] arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming

[Patrick Wildt]

Rather than using odd implicit blob-ext naming, explicitly specify the
type to be of blob-ext and therefore also simplify the node naming.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
---
 arch/arm/dts/imx8mq-u-boot.dtsi | 34 ++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index 566b8b8035..1dc060ce0c 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -22,32 +22,37 @@
 			filename = "u-boot-spl.bin";
 		};
 
-		blob_1: blob-ext@1 {
+		1d-imem {
 			filename = "lpddr4_pmu_train_1d_imem.bin";
 			size = <0x8000>;
+			type = "blob-ext";
 		};
 
-		blob_2: blob-ext@2 {
+		1d-dmem {
 			filename = "lpddr4_pmu_train_1d_dmem.bin";
 			size = <0x4000>;
+			type = "blob-ext";
 		};
 
-		blob_3: blob-ext@3 {
+		2d-imem {
 			filename = "lpddr4_pmu_train_2d_imem.bin";
 			size = <0x8000>;
+			type = "blob-ext";
 		};
 
-		blob_4: blob-ext@4 {
+		2d-dmem {
 			filename = "lpddr4_pmu_train_2d_dmem.bin";
 			size = <0x4000>;
+			type = "blob-ext";
 		};
 	};
 
-	signed_hdmi {
+	signed-hdmi {
 		filename = "signed_hdmi.bin";
 
-		blob_5: blob-ext@5 {
+		signed-hdmi-imx8m {
 			filename = "signed_hdmi_imx8m.bin";
+			type = "blob-ext";
 		};
 	};
 
@@ -60,9 +65,7 @@
 			blob {
 				filename = "u-boot-spl-ddr.bin";
 			};
-
 		};
-
 	};
 
 	itb {
@@ -81,8 +84,9 @@
 					load = <CONFIG_SYS_TEXT_BASE>;
 					type = "standalone";
 
-					uboot_blob: blob-ext {
+					uboot-blob {
 						filename = "u-boot-nodtb.bin";
+						type = "blob-ext";
 					};
 				};
 
@@ -94,8 +98,9 @@
 					load = <0x910000>;
 					type = "firmware";
 
-					atf_blob: blob-ext {
+					atf-blob {
 						filename = "bl31.bin";
+						type = "blob-ext";
 					};
 				};
 
@@ -104,8 +109,9 @@
 					description = "NAME";
 					type = "flat_dt";
 
-					uboot_fdt_blob: blob-ext {
+					uboot-fdt-blob {
 						filename = "u-boot.dtb";
+						type = "blob-ext";
 					};
 				};
 			};
@@ -127,14 +133,16 @@
 		filename = "flash.bin";
 		pad-byte = <0x00>;
 
-		spl: blob-ext@1 {
+		spl {
 			filename = "spl.bin";
 			offset = <0x0>;
+			type = "blob-ext";
 		};
 
-		uboot: blob-ext@2 {
+		binman_uboot: uboot {
 			filename = "u-boot.itb";
 			offset = <0x57c00>;
+			type = "blob-ext";
 		};
 	};
 };
-- 
2.34.1

Re: [PATCH v2 4/4] arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming

[Fabio Estevam]

On 13/01/2022 11:22, Patrick Wildt wrote:
> Rather than using odd implicit blob-ext naming, explicitly specify the
> type to be of blob-ext and therefore also simplify the node naming.
> 
> Signed-off-by: Patrick Wildt <patrick@blueri.se>

Reviewed-by: Fabio Estevam <festevam@denx.de>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: 
festevam@denx.de

[PATCH v2 2/4] arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename

[sbabic]

> Explicitly add SPL aka u-boot-spl.bin filename.
> Signed-off-by: Patrick Wildt <patrick@blueri.se>
> Reviewed-by: Fabio Estevam <festevam@denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================