* [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC
@ 2025-09-30 7:09 Michal Simek
2025-09-30 14:37 ` Tom Rini
2025-10-02 7:23 ` Michal Simek
0 siblings, 2 replies; 3+ messages in thread
From: Michal Simek @ 2025-09-30 7:09 UTC (permalink / raw)
To: u-boot, git, Tom Rini
Cc: Anshul Dalal, Marek Vasut, Padmarao Begari, Prasad Kummari,
Tejas Bhumkar, Venkatesh Yadav Abbarapu
Enable MSCC phy driver instead of VITESSE. Vitesse driver is much older and
is on the way out that's why switch to MSCC driver which covers VSC8531
which is used on one Versal board.
Signed-off-by: Michal Simek <michal.simek@amd.com>
---
configs/amd_versal2_virt_defconfig | 2 +-
configs/xilinx_versal_net_virt_defconfig | 2 +-
configs/xilinx_versal_virt_defconfig | 2 +-
configs/xilinx_zynqmp_virt_defconfig | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/configs/amd_versal2_virt_defconfig b/configs/amd_versal2_virt_defconfig
index 4a7bc1951451..aca03ea50f16 100644
--- a/configs/amd_versal2_virt_defconfig
+++ b/configs/amd_versal2_virt_defconfig
@@ -108,10 +108,10 @@ CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MARVELL=y
+CONFIG_PHY_MSCC=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI_DP83867=y
-CONFIG_PHY_VITESSE=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH_PHY=y
CONFIG_PHY_GIGE=y
diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index 770bd0643c19..192ace8b530c 100644
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -111,10 +111,10 @@ CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_ANEG_TIMEOUT=20000
CONFIG_PHY_MARVELL=y
+CONFIG_PHY_MSCC=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI_DP83867=y
-CONFIG_PHY_VITESSE=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH_PHY=y
CONFIG_PHY_GIGE=y
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index ac78dea587cd..18b972f8ba46 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -120,10 +120,10 @@ CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_ANEG_TIMEOUT=20000
CONFIG_PHY_ADIN=y
CONFIG_PHY_MARVELL=y
+CONFIG_PHY_MSCC=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI_DP83867=y
-CONFIG_PHY_VITESSE=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH_PHY=y
CONFIG_PHY_GIGE=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 6e4ba7269f85..525744b0f61e 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -171,10 +171,10 @@ CONFIG_PHY_ADIN=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_PHY_MSCC=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI_DP83867=y
-CONFIG_PHY_VITESSE=y
CONFIG_PHY_XILINX=y
CONFIG_PHY_XILINX_GMII2RGMII=y
CONFIG_PHY_FIXED=y
--
2.43.0
base-commit: 612074dc5d44e5695c30dcdea55e72f4285a4fe6
branch: debian-sent3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC
2025-09-30 7:09 [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC Michal Simek
@ 2025-09-30 14:37 ` Tom Rini
2025-10-02 7:23 ` Michal Simek
1 sibling, 0 replies; 3+ messages in thread
From: Tom Rini @ 2025-09-30 14:37 UTC (permalink / raw)
To: Michal Simek
Cc: u-boot, git, Anshul Dalal, Marek Vasut, Padmarao Begari,
Prasad Kummari, Tejas Bhumkar, Venkatesh Yadav Abbarapu
[-- Attachment #1: Type: text/plain, Size: 384 bytes --]
On Tue, Sep 30, 2025 at 09:09:26AM +0200, Michal Simek wrote:
> Enable MSCC phy driver instead of VITESSE. Vitesse driver is much older and
> is on the way out that's why switch to MSCC driver which covers VSC8531
> which is used on one Versal board.
>
> Signed-off-by: Michal Simek <michal.simek@amd.com>
Thanks!
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC
2025-09-30 7:09 [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC Michal Simek
2025-09-30 14:37 ` Tom Rini
@ 2025-10-02 7:23 ` Michal Simek
1 sibling, 0 replies; 3+ messages in thread
From: Michal Simek @ 2025-10-02 7:23 UTC (permalink / raw)
To: u-boot, git, Tom Rini
Cc: Anshul Dalal, Marek Vasut, Padmarao Begari, Prasad Kummari,
Tejas Bhumkar, Venkatesh Yadav Abbarapu
On 9/30/25 09:09, Michal Simek wrote:
> Enable MSCC phy driver instead of VITESSE. Vitesse driver is much older and
> is on the way out that's why switch to MSCC driver which covers VSC8531
> which is used on one Versal board.
>
> Signed-off-by: Michal Simek <michal.simek@amd.com>
> ---
>
> configs/amd_versal2_virt_defconfig | 2 +-
> configs/xilinx_versal_net_virt_defconfig | 2 +-
> configs/xilinx_versal_virt_defconfig | 2 +-
> configs/xilinx_zynqmp_virt_defconfig | 2 +-
> 4 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/configs/amd_versal2_virt_defconfig b/configs/amd_versal2_virt_defconfig
> index 4a7bc1951451..aca03ea50f16 100644
> --- a/configs/amd_versal2_virt_defconfig
> +++ b/configs/amd_versal2_virt_defconfig
> @@ -108,10 +108,10 @@ CONFIG_SPI_FLASH_WINBOND=y
> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> CONFIG_SPI_FLASH_MTD=y
> CONFIG_PHY_MARVELL=y
> +CONFIG_PHY_MSCC=y
> CONFIG_PHY_NATSEMI=y
> CONFIG_PHY_REALTEK=y
> CONFIG_PHY_TI_DP83867=y
> -CONFIG_PHY_VITESSE=y
> CONFIG_PHY_FIXED=y
> CONFIG_DM_ETH_PHY=y
> CONFIG_PHY_GIGE=y
> diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
> index 770bd0643c19..192ace8b530c 100644
> --- a/configs/xilinx_versal_net_virt_defconfig
> +++ b/configs/xilinx_versal_net_virt_defconfig
> @@ -111,10 +111,10 @@ CONFIG_SPI_FLASH_WINBOND=y
> CONFIG_SPI_FLASH_MTD=y
> CONFIG_PHY_ANEG_TIMEOUT=20000
> CONFIG_PHY_MARVELL=y
> +CONFIG_PHY_MSCC=y
> CONFIG_PHY_NATSEMI=y
> CONFIG_PHY_REALTEK=y
> CONFIG_PHY_TI_DP83867=y
> -CONFIG_PHY_VITESSE=y
> CONFIG_PHY_FIXED=y
> CONFIG_DM_ETH_PHY=y
> CONFIG_PHY_GIGE=y
> diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
> index ac78dea587cd..18b972f8ba46 100644
> --- a/configs/xilinx_versal_virt_defconfig
> +++ b/configs/xilinx_versal_virt_defconfig
> @@ -120,10 +120,10 @@ CONFIG_SPI_FLASH_MTD=y
> CONFIG_PHY_ANEG_TIMEOUT=20000
> CONFIG_PHY_ADIN=y
> CONFIG_PHY_MARVELL=y
> +CONFIG_PHY_MSCC=y
> CONFIG_PHY_NATSEMI=y
> CONFIG_PHY_REALTEK=y
> CONFIG_PHY_TI_DP83867=y
> -CONFIG_PHY_VITESSE=y
> CONFIG_PHY_FIXED=y
> CONFIG_DM_ETH_PHY=y
> CONFIG_PHY_GIGE=y
> diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
> index 6e4ba7269f85..525744b0f61e 100644
> --- a/configs/xilinx_zynqmp_virt_defconfig
> +++ b/configs/xilinx_zynqmp_virt_defconfig
> @@ -171,10 +171,10 @@ CONFIG_PHY_ADIN=y
> CONFIG_PHY_MARVELL=y
> CONFIG_PHY_MICREL=y
> CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_PHY_MSCC=y
> CONFIG_PHY_NATSEMI=y
> CONFIG_PHY_REALTEK=y
> CONFIG_PHY_TI_DP83867=y
> -CONFIG_PHY_VITESSE=y
> CONFIG_PHY_XILINX=y
> CONFIG_PHY_XILINX_GMII2RGMII=y
> CONFIG_PHY_FIXED=y
Applied.
M
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-10-02 7:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-09-30 7:09 [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC Michal Simek
2025-09-30 14:37 ` Tom Rini
2025-10-02 7:23 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox