* [U-Boot] Booting automatically a binary image
@ 2009-10-14 12:25 Ivan Llopard
2009-10-16 9:26 ` Detlev Zundel
0 siblings, 1 reply; 6+ messages in thread
From: Ivan Llopard @ 2009-10-14 12:25 UTC (permalink / raw)
To: u-boot
Hi list,
I'd like to know how to configure u-boot in order to boot automatically a
binary image, so when i reset my board i can get my program running.
Regards,
Ivan Llopard.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Booting automatically a binary image
2009-10-14 12:25 [U-Boot] Booting automatically a binary image Ivan Llopard
@ 2009-10-16 9:26 ` Detlev Zundel
2009-10-16 13:22 ` Ivan Llopard
0 siblings, 1 reply; 6+ messages in thread
From: Detlev Zundel @ 2009-10-16 9:26 UTC (permalink / raw)
To: u-boot
Hi Ivan,
> I'd like to know how to configure u-boot in order to boot automatically a
> binary image, so when i reset my board i can get my program running.
Documentation sometimes can answer such questions:
http://www.denx.de/wiki/view/DULG/UBootEnvVariables
Check at least 'bootcmd' and 'bootdelay'.
Cheers
Detlev
--
You see, the best way to solve a problem is to rigorously define it in
terms of other people's problems, and then run away quickly.
-- Roland McGrath
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
^ permalink raw reply [flat|nested] 6+ messages in thread* [U-Boot] Booting automatically a binary image
2009-10-16 9:26 ` Detlev Zundel
@ 2009-10-16 13:22 ` Ivan Llopard
0 siblings, 0 replies; 6+ messages in thread
From: Ivan Llopard @ 2009-10-16 13:22 UTC (permalink / raw)
To: u-boot
I found the problem!, i tried with the environment variables but it didn't
work. In fact, i have not defined CONFIG_AUTOBOOT_DELAY in my config file,
so i couldn't even see any autoboot attemp.
Regards,
Ivan Llopard.
2009/10/16 Detlev Zundel <dzu@denx.de>
> Hi Ivan,
>
> > I'd like to know how to configure u-boot in order to boot automatically a
> > binary image, so when i reset my board i can get my program running.
>
> Documentation sometimes can answer such questions:
>
> http://www.denx.de/wiki/view/DULG/UBootEnvVariables
>
> Check at least 'bootcmd' and 'bootdelay'.
>
> Cheers
> Detlev
>
> --
> You see, the best way to solve a problem is to rigorously define it in
> terms of other people's problems, and then run away quickly.
> -- Roland McGrath
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Booting automatically a binary image
@ 2009-10-14 12:46 Ivan Llopard
2009-10-14 13:28 ` Wolfgang Denk
0 siblings, 1 reply; 6+ messages in thread
From: Ivan Llopard @ 2009-10-14 12:46 UTC (permalink / raw)
To: u-boot
Hi list,
I'd like to know how to configure u-boot in order to boot automatically a
binary image, so when i reset my board i can get my program running. What
code is important in order to do it? or where can i get a reference?
Regards,
Ivan Llopard.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Booting automatically a binary image
2009-10-14 12:46 Ivan Llopard
@ 2009-10-14 13:28 ` Wolfgang Denk
2009-10-14 15:24 ` Ivan Llopard
0 siblings, 1 reply; 6+ messages in thread
From: Wolfgang Denk @ 2009-10-14 13:28 UTC (permalink / raw)
To: u-boot
Dear Ivan Llopard,
In message <fb3fdbe90910140546w1863aee2obf48ec8ed1438bd4@mail.gmail.com> you wrote:
>
> I'd like to know how to configure u-boot in order to boot automatically a
> binary image, so when i reset my board i can get my program running. What
> code is important in order to do it? or where can i get a reference?
I suggest you start reading the manual, see
http://www.denx.de/wiki/DULG/Manual
Pay special attention to the parts that describe the use of
environment variables, and there especially the sections about the
"bootcmd" variable. It may also help to read about the "setenv" and
"saveenv" commands.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I'm frequently appalled by the low regard you Earthmen have for life.
-- Spock, "The Galileo Seven", stardate 2822.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Booting automatically a binary image
2009-10-14 13:28 ` Wolfgang Denk
@ 2009-10-14 15:24 ` Ivan Llopard
0 siblings, 0 replies; 6+ messages in thread
From: Ivan Llopard @ 2009-10-14 15:24 UTC (permalink / raw)
To: u-boot
Thanks Wolfgang, i'll take a look.
2009/10/14 Wolfgang Denk <wd@denx.de>
> Dear Ivan Llopard,
>
> In message <fb3fdbe90910140546w1863aee2obf48ec8ed1438bd4@mail.gmail.com>
> you wrote:
> >
> > I'd like to know how to configure u-boot in order to boot automatically a
> > binary image, so when i reset my board i can get my program running. What
> > code is important in order to do it? or where can i get a reference?
>
> I suggest you start reading the manual, see
> http://www.denx.de/wiki/DULG/Manual
>
> Pay special attention to the parts that describe the use of
> environment variables, and there especially the sections about the
> "bootcmd" variable. It may also help to read about the "setenv" and
> "saveenv" commands.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> I'm frequently appalled by the low regard you Earthmen have for life.
> -- Spock, "The Galileo Seven", stardate 2822.3
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-10-16 13:22 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-14 12:25 [U-Boot] Booting automatically a binary image Ivan Llopard
2009-10-16 9:26 ` Detlev Zundel
2009-10-16 13:22 ` Ivan Llopard
-- strict thread matches above, loose matches on Subject: below --
2009-10-14 12:46 Ivan Llopard
2009-10-14 13:28 ` Wolfgang Denk
2009-10-14 15:24 ` Ivan Llopard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox