[PATCH 0/3] ldattach updates

[PATCH 0/3] ldattach updates

[Tilman Schmidt]

Please merge the following three patches for ldattach.

Thanks,
Tilman

Tilman Schmidt (3):
  ldattach: adapt print_table column width to widest entry
  ldattach: order line disciplines canonically
  ldattach: always set line speed and format for N_GIGASET_M101

 sys-utils/ldattach.c | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

-- 
1.9.2.459.g68773ac

[PATCH 3/3] ldattach: always set line speed and format for N_GIGASET_M101

[Tilman Schmidt]

The Gigaset M101 exhibits particularly awkward and confusing behaviour
when the serial line speed isn't set to what the device expects:
Configuration mode detects the used speed and works anyway, but data
mode silently fails. Troubleshooting this is enormously time-consuming.

Spare the users this trouble by setting the line speed and format to
these devices' factory default values as long as the command line
doesn't say otherwise.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
---
 sys-utils/ldattach.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/sys-utils/ldattach.c b/sys-utils/ldattach.c
index bd4fadd..99db32e 100644
--- a/sys-utils/ldattach.c
+++ b/sys-utils/ldattach.c
@@ -366,6 +366,15 @@ int main(int argc, char **argv)
 	if (ldisc < 0)
 		ldisc = strtos32_or_err(argv[optind], _("invalid line discipline argument"));
 
+	/* ldisc specific option settings */
+	if (ldisc == N_GIGASET_M101) {
+		/* device specific defaults for line speed and data format */
+		if (speed == 0) speed = 115200;
+		if (bits == '-') bits = '8';
+		if (parity == '-') parity = 'n';
+		if (stop == '-') stop = '1';
+	}
+
 	/* open device */
 	dev = argv[optind + 1];
 	if ((tty_fd = open(dev, O_RDWR | O_NOCTTY)) < 0)
@@ -448,12 +457,13 @@ int main(int argc, char **argv)
 		}
 	}
 
-	/* Attach the line discpline. */
+	/* Attach the line discipline. */
 	if (ioctl(tty_fd, TIOCSETD, &ldisc) < 0)
 		err(EXIT_FAILURE, _("cannot set line discipline"));
 
 	dbg("line discipline set to %d", ldisc);
 
+	/* ldisc specific post-attach actions */
 	if (ldisc == N_GSM0710)
 		gsm0710_set_conf(tty_fd);
 
-- 
1.9.2.459.g68773ac

[PATCH 2/3] ldattach: order line disciplines canonically

[Tilman Schmidt]

List line disciplines in numerical order and put official names
before convenience aliases.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
---
 sys-utils/ldattach.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/sys-utils/ldattach.c b/sys-utils/ldattach.c
index 5317d22..bd4fadd 100644
--- a/sys-utils/ldattach.c
+++ b/sys-utils/ldattach.c
@@ -62,14 +62,15 @@ struct gsm_config
 #ifndef N_GIGASET_M101
 # define N_GIGASET_M101 16
 #endif
-#ifndef N_GSM0710
-# define N_GSM0710 21
-#endif
 
 #ifndef N_PPS
 # define N_PPS 18
 #endif
 
+#ifndef N_GSM0710
+# define N_GSM0710 21
+#endif
+
 #define MAXINTROPARMLEN 32
 
 /* attach a line discipline ioctl */
@@ -86,7 +87,6 @@ struct ld_table {
 
 /* currently supported line disciplines, plus some aliases */
 static const struct ld_table ld_discs[] = {
-	{ "GSM0710",		N_GSM0710},
 	{ "TTY",		N_TTY },
 	{ "SLIP",		N_SLIP },
 	{ "MOUSE",		N_MOUSE },
@@ -101,10 +101,11 @@ static const struct ld_table ld_discs[] = {
 	{ "SYNC_PPP",		N_SYNC_PPP },
 	{ "SYNCPPP",		N_SYNC_PPP },
 	{ "HCI",		N_HCI },
-	{ "PPS",		N_PPS },
+	{ "GIGASET_M101",	N_GIGASET_M101 },
 	{ "M101",		N_GIGASET_M101 },
 	{ "GIGASET",		N_GIGASET_M101 },
-	{ "GIGASET_M101",	N_GIGASET_M101 },
+	{ "PPS",		N_PPS },
+	{ "GSM0710",		N_GSM0710},
 	{ NULL,	0 }
 };
 
-- 
1.9.2.459.g68773ac

[PATCH 1/3] ldattach: adapt print_table column width to widest entry

[Tilman Schmidt]

The hardcoded column width of 10 in print_table() is not enough, as
the currently longest table entry to be printed has 12 characters.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
---
 sys-utils/ldattach.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sys-utils/ldattach.c b/sys-utils/ldattach.c
index 33c7aa2..5317d22 100644
--- a/sys-utils/ldattach.c
+++ b/sys-utils/ldattach.c
@@ -161,8 +161,8 @@ static void print_table(FILE * out, const struct ld_table *tab)
 	int i;
 
 	for (t = tab, i = 1; t && t->name; t++, i++) {
-		fprintf(out, "  %-10s", t->name);
-		if (!(i % 6))
+		fprintf(out, "  %-12s", t->name);
+		if (!(i % 5))
 			fputc('\n', out);
 	}
 }
-- 
1.9.2.459.g68773ac

Re: [PATCH 0/3] ldattach updates

[Karel Zak]

On Thu, Jul 09, 2015 at 03:22:32PM +0200, Tilman Schmidt wrote:
>   ldattach: adapt print_table column width to widest entry
>   ldattach: order line disciplines canonically
>   ldattach: always set line speed and format for N_GIGASET_M101

 Applied, thanks!

    Karel
-- 
 Karel Zak  <kzak@redhat.com>
 http://karelzak.blogspot.com