[PATCH v5 0/2] virtio_balloon: Conversion to workqueue + parallel stats

[PATCH v5 0/2] virtio_balloon: Conversion to workqueue + parallel stats

[Petr Mladek]

The previous version did not prevent updating the balloon when it was
being removed. There was an idea to update the stats in a separate work
and cancel it after the config reset. But this does not seem to work.
The code for updating the stats communicates with the host. IMHO, it
should not run after the reset (flushing buffers). Therefore I decided
to use a boolean value and a spin lock (inspired by virtio_scsi).

Michael S. Tsirkin suggested that it would have been nice to split the work
and updated the stats in parallel. I did a lot of investigation and it seemed
that we did not need any extra sychronization. Anyway, I rather made the split
in a separate patch. See the patch description for more details.

Changes against v4:

  + removed fix of the balloon restore code; it was false alarm;
    freezer waken the kthread and it restored the balloon later

  + added a spin lock to prevent updating the balloon when being removed

  + split the work into two; it allows to update stats even
    when the balloon is being resized


Changes against v3:

  + rebased on 4.4-rc3

  + call cancel_work_sync() when removing the balloon

  + do not queue the work from fill_balloon() and leak_balloon()
    because they are called also independently from the workqueue,
    e.g. remove_common(), virtballoon_oom_notify(). Re-queue
    the work from the work function when necessary.


Changes against v2:

  + Use system_freezable_wq instead of an allocated one
    and move INIT_WORK() higher in virtballoon_probe().

  + Fix typos in the commit message.


Changes against v1:

  + More elegant detection of the pending work in fill_balloon() and
    leak_balloon(). It still needs to keep the original requested number
    of pages but it does not add any extra boolean variable.

  + Remove WQ_MEM_RECLAIM workqueue parameter. If I get it correctly,
    this is possible because the code manipulates memory but it is not
    used in the memory reclaim path.

  + initialize the work item before allocation the workqueue


Just for record, the discussion about the previous version can be found
at http://thread.gmane.org/gmane.linux.kernel/2100306


Petr Mladek (2):
  virtio_balloon: Use a workqueue instead of "vballoon" kthread
  virtio_balloon: Allow to resize and update the balloon stats in
    parallel

 drivers/virtio/virtio_balloon.c | 122 ++++++++++++++++++++--------------------
 1 file changed, 61 insertions(+), 61 deletions(-)

-- 
1.8.5.6

[PATCH v5 1/2] virtio_balloon: Use a workqueue instead of "vballoon" kthread

[Petr Mladek]

This patch moves the deferred work from the "vballoon" kthread into a
system freezable workqueue.

We do not need to maintain and run a dedicated kthread. Also the event
driven workqueues API makes the logic much easier. Especially, we do
not longer need an own wait queue, wait function, and freeze point.

The conversion is pretty straightforward. One cycle of the main loop
is put into a work. The work is queued instead of waking the kthread.

fill_balloon() and leak_balloon() have a limit for the amount of modified
pages. The work re-queues itself when necessary. For this, we make
fill_balloon() to return the number of really modified pages.
Note that leak_balloon() already did this.

virtballoon_restore() queues the work only when really needed.

The only complication is that we need to prevent queuing the work
when the balloon is being removed. It was easier before because the
kthread simply removed itself from the wait queue. We need an
extra boolean and spin lock now.

My initial idea was to use a dedicated workqueue. Michael S. Tsirkin
suggested using a system one. Tejun Heo confirmed that the system
workqueue has a pretty high concurrency level (256) by default.
Therefore we need not be afraid of too long blocking.

Signed-off-by: Petr Mladek <pmladek@suse.cz>
---
 drivers/virtio/virtio_balloon.c | 108 +++++++++++++++++++---------------------
 1 file changed, 51 insertions(+), 57 deletions(-)

diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 0c3691f46575..2c9a92f1e525 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -22,8 +22,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_balloon.h>
 #include <linux/swap.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
+#include <linux/workqueue.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -49,11 +48,12 @@ struct virtio_balloon {
 	struct virtio_device *vdev;
 	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
 
-	/* Where the ballooning thread waits for config to change. */
-	wait_queue_head_t config_change;
+	/* The balloon servicing is delegated to a freezable workqueue. */
+	struct work_struct work;
 
-	/* The thread servicing the balloon. */
-	struct task_struct *thread;
+	/* Prevent updating balloon when it is being canceled. */
+	spinlock_t stop_update_lock;
+	bool stop_update;
 
 	/* Waiting for host to ack the pages we released. */
 	wait_queue_head_t acked;
@@ -135,9 +135,10 @@ static void set_page_pfns(u32 pfns[], struct page *page)
 		pfns[i] = page_to_balloon_pfn(page) + i;
 }
 
-static void fill_balloon(struct virtio_balloon *vb, size_t num)
+static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
 {
 	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
+	unsigned num_allocated_pages;
 
 	/* We can only do one array worth at a time. */
 	num = min(num, ARRAY_SIZE(vb->pfns));
@@ -162,10 +163,13 @@ static void fill_balloon(struct virtio_balloon *vb, size_t num)
 			adjust_managed_page_count(page, -1);
 	}
 
+	num_allocated_pages = vb->num_pfns;
 	/* Did we get any? */
 	if (vb->num_pfns != 0)
 		tell_host(vb, vb->inflate_vq);
 	mutex_unlock(&vb->balloon_lock);
+
+	return num_allocated_pages;
 }
 
 static void release_pages_balloon(struct virtio_balloon *vb)
@@ -251,14 +255,19 @@ static void update_balloon_stats(struct virtio_balloon *vb)
  * with a single buffer.  From that point forward, all conversations consist of
  * a hypervisor request (a call to this function) which directs us to refill
  * the virtqueue with a fresh stats buffer.  Since stats collection can sleep,
- * we notify our kthread which does the actual work via stats_handle_request().
+ * we delegate the job to a freezable workqueue that will do the actual work via
+ * stats_handle_request().
  */
 static void stats_request(struct virtqueue *vq)
 {
 	struct virtio_balloon *vb = vq->vdev->priv;
 
 	vb->need_stats_update = 1;
-	wake_up(&vb->config_change);
+
+	spin_lock(&vb->stop_update_lock);
+	if (!vb->stop_update)
+		queue_work(system_freezable_wq, &vb->work);
+	spin_unlock(&vb->stop_update_lock);
 }
 
 static void stats_handle_request(struct virtio_balloon *vb)
@@ -281,8 +290,12 @@ static void stats_handle_request(struct virtio_balloon *vb)
 static void virtballoon_changed(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb = vdev->priv;
+	unsigned long flags;
 
-	wake_up(&vb->config_change);
+	spin_lock_irqsave(&vb->stop_update_lock, flags);
+	if (!vb->stop_update)
+		queue_work(system_freezable_wq, &vb->work);
+	spin_unlock_irqrestore(&vb->stop_update_lock, flags);
 }
 
 static inline s64 towards_target(struct virtio_balloon *vb)
@@ -345,43 +358,25 @@ static int virtballoon_oom_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static int balloon(void *_vballoon)
+static void balloon(struct work_struct *work)
 {
-	struct virtio_balloon *vb = _vballoon;
-	DEFINE_WAIT_FUNC(wait, woken_wake_function);
-
-	set_freezable();
-	while (!kthread_should_stop()) {
-		s64 diff;
-
-		try_to_freeze();
-
-		add_wait_queue(&vb->config_change, &wait);
-		for (;;) {
-			if ((diff = towards_target(vb)) != 0 ||
-			    vb->need_stats_update ||
-			    kthread_should_stop() ||
-			    freezing(current))
-				break;
-			wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
-		}
-		remove_wait_queue(&vb->config_change, &wait);
+	struct virtio_balloon *vb;
+	s64 diff;
 
-		if (vb->need_stats_update)
-			stats_handle_request(vb);
-		if (diff > 0)
-			fill_balloon(vb, diff);
-		else if (diff < 0)
-			leak_balloon(vb, -diff);
-		update_balloon_size(vb);
+	vb = container_of(work, struct virtio_balloon, work);
+	diff = towards_target(vb);
 
-		/*
-		 * For large balloon changes, we could spend a lot of time
-		 * and always have work to do.  Be nice if preempt disabled.
-		 */
-		cond_resched();
-	}
-	return 0;
+	if (vb->need_stats_update)
+		stats_handle_request(vb);
+
+	if (diff > 0)
+		diff -= fill_balloon(vb, diff);
+	else if (diff < 0)
+		diff += leak_balloon(vb, -diff);
+	update_balloon_size(vb);
+
+	if (diff)
+		queue_work(system_freezable_wq, work);
 }
 
 static int init_vqs(struct virtio_balloon *vb)
@@ -499,9 +494,11 @@ static int virtballoon_probe(struct virtio_device *vdev)
 		goto out;
 	}
 
+	INIT_WORK(&vb->work, balloon);
+	spin_lock_init(&vb->stop_update_lock);
+	vb->stop_update = false;
 	vb->num_pages = 0;
 	mutex_init(&vb->balloon_lock);
-	init_waitqueue_head(&vb->config_change);
 	init_waitqueue_head(&vb->acked);
 	vb->vdev = vdev;
 	vb->need_stats_update = 0;
@@ -523,16 +520,8 @@ static int virtballoon_probe(struct virtio_device *vdev)
 
 	virtio_device_ready(vdev);
 
-	vb->thread = kthread_run(balloon, vb, "vballoon");
-	if (IS_ERR(vb->thread)) {
-		err = PTR_ERR(vb->thread);
-		goto out_del_vqs;
-	}
-
 	return 0;
 
-out_del_vqs:
-	unregister_oom_notifier(&vb->nb);
 out_oom_notify:
 	vdev->config->del_vqs(vdev);
 out_free_vb:
@@ -559,7 +548,12 @@ static void virtballoon_remove(struct virtio_device *vdev)
 	struct virtio_balloon *vb = vdev->priv;
 
 	unregister_oom_notifier(&vb->nb);
-	kthread_stop(vb->thread);
+
+	spin_lock_irq(&vb->stop_update_lock);
+	vb->stop_update = true;
+	spin_unlock_irq(&vb->stop_update_lock);
+	cancel_work_sync(&vb->work);
+
 	remove_common(vb);
 	kfree(vb);
 }
@@ -570,10 +564,9 @@ static int virtballoon_freeze(struct virtio_device *vdev)
 	struct virtio_balloon *vb = vdev->priv;
 
 	/*
-	 * The kthread is already frozen by the PM core before this
+	 * The workqueue is already frozen by the PM core before this
 	 * function is called.
 	 */
-
 	remove_common(vb);
 	return 0;
 }
@@ -589,7 +582,8 @@ static int virtballoon_restore(struct virtio_device *vdev)
 
 	virtio_device_ready(vdev);
 
-	fill_balloon(vb, towards_target(vb));
+	if (towards_target(vb))
+		virtballoon_changed(vdev);
 	update_balloon_size(vb);
 	return 0;
 }
-- 
1.8.5.6

[PATCH v5 2/2] virtio_balloon: Allow to resize and update the balloon stats in parallel

[Petr Mladek]

The virtio balloon statistics are not updated when the balloon
is being resized. But it seems that both tasks could be done
in parallel.

stats_handle_request() updates the statistics in the balloon
structure and then communicates with the host.

update_balloon_stats() calls all_vm_events() that just reads
some per-CPU variables. The values might change during and
after the call but it is expected and happens even without
this patch.

update_balloon_stats() also calls si_meminfo(). It is a bit
more complex function. It too just reads some variables and
looks lock-less safe. In each case, it seems to be called
lock-less on several similar locations, e.g. from post_status()
in dm_thread_func(), or from vmballoon_send_get_target().

The communication with the host is done via a separate virtqueue,
see vb->stats_vq vs. vb->inflate_vq and vb->deflate_vq. Therefore
it could be used in parallel with fill_balloon() and leak_balloon().

This patch splits the existing work into two pieces. One is for
updating the balloon stats. The other is for resizing of the balloon.
It seems that they can be proceed in parallel without any
extra locking.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 drivers/virtio/virtio_balloon.c | 36 +++++++++++++++++++++---------------
 1 file changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 2c9a92f1e525..9057cc768ca5 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -49,7 +49,8 @@ struct virtio_balloon {
 	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
 
 	/* The balloon servicing is delegated to a freezable workqueue. */
-	struct work_struct work;
+	struct work_struct update_balloon_stats_work;
+	struct work_struct update_balloon_size_work;
 
 	/* Prevent updating balloon when it is being canceled. */
 	spinlock_t stop_update_lock;
@@ -76,7 +77,6 @@ struct virtio_balloon {
 	u32 pfns[VIRTIO_BALLOON_ARRAY_PFNS_MAX];
 
 	/* Memory statistics */
-	int need_stats_update;
 	struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR];
 
 	/* To register callback in oom notifier call chain */
@@ -123,6 +123,7 @@ static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
 
 	/* When host has read buffer, this completes via balloon_ack */
 	wait_event(vb->acked, virtqueue_get_buf(vq, &len));
+
 }
 
 static void set_page_pfns(u32 pfns[], struct page *page)
@@ -262,11 +263,9 @@ static void stats_request(struct virtqueue *vq)
 {
 	struct virtio_balloon *vb = vq->vdev->priv;
 
-	vb->need_stats_update = 1;
-
 	spin_lock(&vb->stop_update_lock);
 	if (!vb->stop_update)
-		queue_work(system_freezable_wq, &vb->work);
+		queue_work(system_freezable_wq, &vb->update_balloon_stats_work);
 	spin_unlock(&vb->stop_update_lock);
 }
 
@@ -276,7 +275,6 @@ static void stats_handle_request(struct virtio_balloon *vb)
 	struct scatterlist sg;
 	unsigned int len;
 
-	vb->need_stats_update = 0;
 	update_balloon_stats(vb);
 
 	vq = vb->stats_vq;
@@ -294,7 +292,7 @@ static void virtballoon_changed(struct virtio_device *vdev)
 
 	spin_lock_irqsave(&vb->stop_update_lock, flags);
 	if (!vb->stop_update)
-		queue_work(system_freezable_wq, &vb->work);
+		queue_work(system_freezable_wq, &vb->update_balloon_size_work);
 	spin_unlock_irqrestore(&vb->stop_update_lock, flags);
 }
 
@@ -358,17 +356,24 @@ static int virtballoon_oom_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static void balloon(struct work_struct *work)
+static void update_balloon_stats_func(struct work_struct *work)
+{
+	struct virtio_balloon *vb;
+
+	vb = container_of(work, struct virtio_balloon,
+			  update_balloon_stats_work);
+	stats_handle_request(vb);
+}
+
+static void update_balloon_size_func(struct work_struct *work)
 {
 	struct virtio_balloon *vb;
 	s64 diff;
 
-	vb = container_of(work, struct virtio_balloon, work);
+	vb = container_of(work, struct virtio_balloon,
+			  update_balloon_size_work);
 	diff = towards_target(vb);
 
-	if (vb->need_stats_update)
-		stats_handle_request(vb);
-
 	if (diff > 0)
 		diff -= fill_balloon(vb, diff);
 	else if (diff < 0)
@@ -494,14 +499,14 @@ static int virtballoon_probe(struct virtio_device *vdev)
 		goto out;
 	}
 
-	INIT_WORK(&vb->work, balloon);
+	INIT_WORK(&vb->update_balloon_stats_work, update_balloon_stats_func);
+	INIT_WORK(&vb->update_balloon_size_work, update_balloon_size_func);
 	spin_lock_init(&vb->stop_update_lock);
 	vb->stop_update = false;
 	vb->num_pages = 0;
 	mutex_init(&vb->balloon_lock);
 	init_waitqueue_head(&vb->acked);
 	vb->vdev = vdev;
-	vb->need_stats_update = 0;
 
 	balloon_devinfo_init(&vb->vb_dev_info);
 #ifdef CONFIG_BALLOON_COMPACTION
@@ -552,7 +557,8 @@ static void virtballoon_remove(struct virtio_device *vdev)
 	spin_lock_irq(&vb->stop_update_lock);
 	vb->stop_update = true;
 	spin_unlock_irq(&vb->stop_update_lock);
-	cancel_work_sync(&vb->work);
+	cancel_work_sync(&vb->update_balloon_size_work);
+	cancel_work_sync(&vb->update_balloon_stats_work);
 
 	remove_common(vb);
 	kfree(vb);
-- 
1.8.5.6