Re: [PATCH v5 09/44] drm: handle HAS_IOPORT dependencies

* Re: [PATCH v5 09/44] drm: handle HAS_IOPORT dependencies
       [not found] ` <20230522105049.1467313-10-schnelle@linux.ibm.com>
@ 2023-05-22 12:38   ` Thomas Zimmermann
  2023-05-22 13:06     ` Arnd Bergmann
  2023-05-22 13:14     ` Gerd Hoffmann
  0 siblings, 2 replies; 3+ messages in thread
From: Thomas Zimmermann @ 2023-05-22 12:38 UTC (permalink / raw)
  To: Niklas Schnelle, Arnd Bergmann, Dave Airlie, Gerd Hoffmann,
	David Airlie, Daniel Vetter
  Cc: linux-arch, Arnd Bergmann, Geert Uytterhoeven, Albert Ou,
	Rafael J. Wysocki, Greg Kroah-Hartman, Uwe Kleine-König,
	linux-pci, linux-kernel, dri-devel, virtualization, Alan Stern,
	Paul Walmsley, Bjorn Helgaas, spice-devel, Mauro Carvalho Chehab,
	Palmer Dabbelt

[-- Attachment #1.1.1: Type: text/plain, Size: 4511 bytes --]

Hi

Am 22.05.23 um 12:50 schrieb Niklas Schnelle:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them. In the bochs driver there is optional MMIO
> support detected at runtime, warn if this isn't taken when
> HAS_IOPORT is not defined.
> 
> There is also a direct and hard coded use in cirrus.c which according to
> the comment is only necessary during resume.  Let's just skip this as
> for example s390 which doesn't have I/O port support also doesen't
> support suspend/resume.

I think we should consider making cirrus depend on HAS_IOPORT. The 
driver is only for qemu's cirrus emulation, which IIRC can only be 
enabled for i586. And it has all been deprecated long ago.

> 
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
>   drivers/gpu/drm/qxl/Kconfig   |  1 +
>   drivers/gpu/drm/tiny/bochs.c  | 17 +++++++++++++++++
>   drivers/gpu/drm/tiny/cirrus.c |  2 ++
>   3 files changed, 20 insertions(+)
> 
> diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig
> index ca3f51c2a8fe..d0e0d440c8d9 100644
> --- a/drivers/gpu/drm/qxl/Kconfig
> +++ b/drivers/gpu/drm/qxl/Kconfig
> @@ -2,6 +2,7 @@
>   config DRM_QXL
>   	tristate "QXL virtual GPU"
>   	depends on DRM && PCI && MMU
> +	depends on HAS_IOPORT
>   	select DRM_KMS_HELPER
>   	select DRM_TTM
>   	select DRM_TTM_HELPER
> diff --git a/drivers/gpu/drm/tiny/bochs.c b/drivers/gpu/drm/tiny/bochs.c
> index d254679a136e..3710339407cc 100644
> --- a/drivers/gpu/drm/tiny/bochs.c
> +++ b/drivers/gpu/drm/tiny/bochs.c
> @@ -2,6 +2,7 @@
>   
>   #include <linux/module.h>
>   #include <linux/pci.h>
> +#include <asm/bug.h>

Why not <linux/bug.h> ?

>   
>   #include <drm/drm_aperture.h>
>   #include <drm/drm_atomic_helper.h>
> @@ -105,7 +106,9 @@ static void bochs_vga_writeb(struct bochs_device *bochs, u16 ioport, u8 val)
>   
>   		writeb(val, bochs->mmio + offset);
>   	} else {
> +#ifdef CONFIG_HAS_IOPORT
>   		outb(val, ioport);
> +#endif

Would it be feasible to define inb, inw, outb and outw at the top of 
bochs.c if no HAS_IOPORT has been set?  That would avoid the ifdef 
branching within the code.

>   	}
>   }
>   
> @@ -119,7 +122,11 @@ static u8 bochs_vga_readb(struct bochs_device *bochs, u16 ioport)
>   
>   		return readb(bochs->mmio + offset);
>   	} else {
> +#ifdef CONFIG_HAS_IOPORT
>   		return inb(ioport);
> +#else
> +		return 0xff;
> +#endif
>   	}
>   }
>   
> @@ -132,8 +139,12 @@ static u16 bochs_dispi_read(struct bochs_device *bochs, u16 reg)
>   
>   		ret = readw(bochs->mmio + offset);
>   	} else {
> +#ifdef CONFIG_HAS_IOPORT
>   		outw(reg, VBE_DISPI_IOPORT_INDEX);
>   		ret = inw(VBE_DISPI_IOPORT_DATA);
> +#else
> +		ret = 0xffff;
> +#endif
>   	}
>   	return ret;
>   }
> @@ -145,8 +156,10 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val)
>   
>   		writew(val, bochs->mmio + offset);
>   	} else {
> +#ifdef CONFIG_HAS_IOPORT
>   		outw(reg, VBE_DISPI_IOPORT_INDEX);
>   		outw(val, VBE_DISPI_IOPORT_DATA);
> +#endif
>   	}
>   }
>   
> @@ -229,6 +242,10 @@ static int bochs_hw_init(struct drm_device *dev)
>   			return -ENOMEM;
>   		}
>   	} else {
> +		if (!IS_ENABLED(CONFIG_HAS_IOPORT)) {
> +			DRM_ERROR("I/O ports are not supported\n");

Use drm_err() here.

Best regards
Thomas

> +			return -EIO;
> +		}
>   		ioaddr = VBE_DISPI_IOPORT_INDEX;
>   		iosize = 2;
>   		if (!request_region(ioaddr, iosize, "bochs-drm")) {
> diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
> index 594bc472862f..c65fea049bc7 100644
> --- a/drivers/gpu/drm/tiny/cirrus.c
> +++ b/drivers/gpu/drm/tiny/cirrus.c
> @@ -508,8 +508,10 @@ static void cirrus_crtc_helper_atomic_enable(struct drm_crtc *crtc,
>   
>   	cirrus_mode_set(cirrus, &crtc_state->mode);
>   
> +#ifdef CONFIG_HAS_IOPORT
>   	/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
>   	outb(VGA_AR_ENABLE_DISPLAY, VGA_ATT_W);
> +#endif
>   
>   	drm_dev_exit(idx);
>   }

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]

[-- Attachment #2: Type: text/plain, Size: 183 bytes --]

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

^ permalink raw reply	[flat|nested] 3+ messages in thread