[PATCH] bmaptool: rename

[PATCH] bmaptool: rename

[Trevor Woerner]

What was previously known variously as Bmaptool, bmaptools, bmap-tool,
and/or bmap-tools has been updated to the singular name: bmaptool. Update
all references to suit.

Since we are not in charge of debian's package naming policy, any
references that relate to debian package(s) will stay as "bmap-tools".

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
---
 documentation/dev-manual/bmaptool.rst | 20 ++++++++++----------
 documentation/dev-manual/wic.rst      |  2 +-
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/documentation/dev-manual/bmaptool.rst b/documentation/dev-manual/bmaptool.rst
index 9add72cf3b80..f6f0e6afaf8f 100644
--- a/documentation/dev-manual/bmaptool.rst
+++ b/documentation/dev-manual/bmaptool.rst
@@ -4,10 +4,10 @@ Flashing Images Using ``bmaptool``
 **********************************
 
 A fast and easy way to flash an image to a bootable device is to use
-Bmaptool, which is integrated into the OpenEmbedded build system.
-Bmaptool is a generic tool that creates a file's block map (bmap) and
+bmaptool, which is integrated into the OpenEmbedded build system.
+bmaptool is a generic tool that creates a file's block map (bmap) and
 then uses that map to copy the file. As compared to traditional tools
-such as dd or cp, Bmaptool can copy (or flash) large files like raw
+such as dd or cp, bmaptool can copy (or flash) large files like raw
 system image files much faster.
 
 .. note::
@@ -20,13 +20,13 @@ system image files much faster.
          $ sudo apt install bmap-tools
 
    -  If you are unable to install the ``bmap-tools`` package, you will
-      need to build Bmaptool before using it. Use the following command::
+      need to build bmaptool before using it. Use the following command::
 
-         $ bitbake bmap-tools-native
+         $ bitbake bmaptool-native
 
 Following, is an example that shows how to flash a Wic image. Realize
-that while this example uses a Wic image, you can use Bmaptool to flash
-any type of image. Use these steps to flash an image using Bmaptool:
+that while this example uses a Wic image, you can use bmaptool to flash
+any type of image. Use these steps to flash an image using bmaptool:
 
 #. *Update your local.conf File:* You need to have the following set
    in your ``local.conf`` file before building your image::
@@ -39,19 +39,19 @@ any type of image. Use these steps to flash an image using Bmaptool:
 
       $ bitbake image
 
-#. *Flash the Device:* Flash the device with the image by using Bmaptool
+#. *Flash the Device:* Flash the device with the image by using bmaptool
    depending on your particular setup. The following commands assume the
    image resides in the :term:`Build Directory`'s ``deploy/images/`` area:
 
    -  If you have write access to the media, use this command form::
 
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
    -  If you do not have write access to the media, set your permissions
       first and then use the same command form::
 
          $ sudo chmod 666 /dev/sdX
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
 For help on the ``bmaptool`` command, use the following command::
 
diff --git a/documentation/dev-manual/wic.rst b/documentation/dev-manual/wic.rst
index 312f78c403a2..05e9cb381b31 100644
--- a/documentation/dev-manual/wic.rst
+++ b/documentation/dev-manual/wic.rst
@@ -503,7 +503,7 @@ Continuing with the example, you can now write the image from the
 built your image, and boot from the media. You can write the image by using
 ``bmaptool`` or ``dd``::
 
-   $ oe-run-native bmap-tools-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
+   $ oe-run-native bmaptool-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
 
 or ::
 
-- 
2.43.0.76.g1a87c842ece3

Re: [docs] [PATCH] bmaptool: rename

[Michael Opdenacker]

Hi Trevor

Thanks for the patch and for taking care of bmaptool!

On 3/5/24 at 23:07, Trevor Woerner wrote:
> What was previously known variously as Bmaptool, bmaptools, bmap-tool,
> and/or bmap-tools has been updated to the singular name: bmaptool. Update
> all references to suit.
>
> Since we are not in charge of debian's package naming policy, any
> references that relate to debian package(s) will stay as "bmap-tools".
>
> Signed-off-by: Trevor Woerner <twoerner@gmail.com>


Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Merged into "master-next"
Thanks again
Michael.

-- 
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com