[PATCH v2 1/8] docs: give the root prompts a preamble

[Trevor Woerner <twoerner@gmail.com>]

A bare "#" starting a line is a root prompt, a comment and a line of
program output all at once, and nothing can tell them apart. Most root
prompts in the manuals already carry a preamble naming the machine, and
the stragglers are what make the distinction unreliable.

Add the preamble the others already use: the machine the surrounding
steps name, or a generic "machine" where they name none.

AI-Generated: codex/claude-opus 5 (xhigh)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
---
changes in v2:
- rebased on master-next
- the SystemTap example uses a generic root@machine prompt; the two
  kernel-dev ones keep qemux86, which the surrounding steps name
---
 documentation/kernel-dev/common.rst    | 4 ++--
 documentation/profile-manual/usage.rst | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/documentation/kernel-dev/common.rst b/documentation/kernel-dev/common.rst
index 2a65055e2a44..fe2e42265f9f 100644
--- a/documentation/kernel-dev/common.rst
+++ b/documentation/kernel-dev/common.rst
@@ -722,7 +722,7 @@ the ":ref:`kernel-dev/common:getting ready to develop using ``devtool```" Sectio
 
       .. code-block:: none
 
-         # dmesg | less
+         root@qemux86:~# dmesg | less
 
       You should see
       the results of your ``printk`` statements as part of the output
@@ -878,7 +878,7 @@ Section.
 
    .. code-block:: none
 
-      # dmesg | less
+      root@qemux86:~# dmesg | less
 
    You should see the results of your
    ``printk`` statements as part of the output when you scroll down the
diff --git a/documentation/profile-manual/usage.rst b/documentation/profile-manual/usage.rst
index dc34fa36c487..4efaa6d10fce 100644
--- a/documentation/profile-manual/usage.rst
+++ b/documentation/profile-manual/usage.rst
@@ -1801,7 +1801,7 @@ probe, you'd just install SystemTap on the system you want to probe,
 and directly run the probe on that system e.g. assuming the name of the
 file containing the above text is ``trace_open.stp``::
 
-   # stap trace_open.stp
+   root@machine:~# stap trace_open.stp
 
 What SystemTap does under the covers to run this probe is 1) parse and
 convert the probe to an equivalent "C" form, 2) compile the "C" form
-- 
2.50.0.173.g8b6f19ccfc3a