Re: [yocto] #yocto #dunfell #qemux86-64

Re: [yocto] #yocto #dunfell #qemux86-64

[Alexander Kanavin]

You need to run this in a X11 session, or use 'nographic' parameter.

Alex

On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via
lists.yoctoproject.org
<steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
>
>
>
> Hello:
>
>
>
> I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
>
>
>
> When building the default : core-image-minimal or core-image-sato, clean with no errors/warnings, on execution
>
> I get the following error for both (see below)…
>
>
>
> (1)    Is this an issue with the release ?,  and is there another release I should be using ?
>
> (2)    Is there something I need to pre-configure for these builds to run properly ?
>
> (3)    How might I resolve this issue ?
>
>
>
> 06:57 smonsees@yix490016 /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min>runqemu qemux86-64
>
> runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
>
> runqemu - INFO - Continuing with the following parameters:
>
> KERNEL: [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
>
> MACHINE: [qemux86-64]
>
> FSTYPE: [ext4]
>
> ROOTFS: [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4]
>
> CONFFILE: [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.qemuboot.conf]
>
>
>
> runqemu - INFO - Setting up tap interface under sudo
>
> [sudo] password for smonsees:
>
> runqemu - INFO - Network configuration: ip=192.168.7.2::192.168.7.1:255.255.255.0
>
> runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
>
>
>
> runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 not available) - exiting
>
>
>
> runqemu - INFO - Cleaning up
>
> Set 'tap0' nonpersistent
>
>
>
> Thank you for your help,
>
> Steve
>
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#57954): https://lists.yoctoproject.org/g/yocto/message/57954
> Mute This Topic: https://lists.yoctoproject.org/mt/93368526/1686489
> Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto
> Mute #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell
> Mute #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86-64
> Group Owner: yocto+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [alex.kanavin@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>

RE: [yocto] #yocto #dunfell #qemux86-64

[Monsees, Steven C (US)]

Thank you for the quick replay...

The no graphic option does work but the kernel comes up with errors...

Will full wayland support be added to the dunfell release ?

Steve

-----Original Message-----
From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On Behalf Of Alexander Kanavin
Sent: Wednesday, August 31, 2022 7:23 AM
To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
Cc: yocto@lists.yoctoproject.org
Subject: Re: [yocto] #yocto #dunfell #qemux86-64

External Email Alert

This email has been sent from an account outside of the BAE Systems network.

Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.


You need to run this in a X11 session, or use 'nographic' parameter.

Alex

On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
>
>
>
> Hello:
>
>
>
> I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
>
>
>
> When building the default : core-image-minimal or core-image-sato, 
> clean with no errors/warnings, on execution
>
> I get the following error for both (see below)…
>
>
>
> (1)    Is this an issue with the release ?,  and is there another release I should be using ?
>
> (2)    Is there something I need to pre-configure for these builds to run properly ?
>
> (3)    How might I resolve this issue ?
>
>
>
> 06:57 smonsees@yix490016 
> /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfe
> ll_Min>runqemu qemux86-64
>
> runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
>
> runqemu - INFO - Continuing with the following parameters:
>
> KERNEL: 
> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
> ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb
> 08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
>
> MACHINE: [qemux86-64]
>
> FSTYPE: [ext4]
>
> ROOTFS: 
> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
> ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-202
> 20830151817.rootfs.ext4]
>
> CONFFILE: 
> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
> ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-202
> 20830151817.qemuboot.conf]
>
>
>
> runqemu - INFO - Setting up tap interface under sudo
>
> [sudo] password for smonsees:
>
> runqemu - INFO - Network configuration: 
> ip=192.168.7.2::192.168.7.1:255.255.255.0
>
> runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
>
>
>
> runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 not 
> available) - exiting
>
>
>
> runqemu - INFO - Cleaning up
>
> Set 'tap0' nonpersistent
>
>
>
> Thank you for your help,
>
> Steve
>
>
>
>
> 
>

Re: [yocto] #yocto #dunfell #qemux86-64

[Alexander Kanavin]

I need to see the errors to give a useful answer. If you want wayland,
use core-image-weston as the image.

Alex

On Wed, 31 Aug 2022 at 13:37, Monsees, Steven C (US) via
lists.yoctoproject.org
<steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
>
>
> Thank you for the quick replay...
>
> The no graphic option does work but the kernel comes up with errors...
>
> Will full wayland support be added to the dunfell release ?
>
> Steve
>
> -----Original Message-----
> From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On Behalf Of Alexander Kanavin
> Sent: Wednesday, August 31, 2022 7:23 AM
> To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> Cc: yocto@lists.yoctoproject.org
> Subject: Re: [yocto] #yocto #dunfell #qemux86-64
>
> External Email Alert
>
> This email has been sent from an account outside of the BAE Systems network.
>
> Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.
>
>
> You need to run this in a X11 session, or use 'nographic' parameter.
>
> Alex
>
> On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
> >
> >
> >
> > Hello:
> >
> >
> >
> > I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
> >
> >
> >
> > When building the default : core-image-minimal or core-image-sato,
> > clean with no errors/warnings, on execution
> >
> > I get the following error for both (see below)…
> >
> >
> >
> > (1)    Is this an issue with the release ?,  and is there another release I should be using ?
> >
> > (2)    Is there something I need to pre-configure for these builds to run properly ?
> >
> > (3)    How might I resolve this issue ?
> >
> >
> >
> > 06:57 smonsees@yix490016
> > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfe
> > ll_Min>runqemu qemux86-64
> >
> > runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
> >
> > runqemu - INFO - Continuing with the following parameters:
> >
> > KERNEL:
> > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
> > ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb
> > 08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
> >
> > MACHINE: [qemux86-64]
> >
> > FSTYPE: [ext4]
> >
> > ROOTFS:
> > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
> > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-202
> > 20830151817.rootfs.ext4]
> >
> > CONFFILE:
> > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
> > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-202
> > 20830151817.qemuboot.conf]
> >
> >
> >
> > runqemu - INFO - Setting up tap interface under sudo
> >
> > [sudo] password for smonsees:
> >
> > runqemu - INFO - Network configuration:
> > ip=192.168.7.2::192.168.7.1:255.255.255.0
> >
> > runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
> >
> >
> >
> > runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 not
> > available) - exiting
> >
> >
> >
> > runqemu - INFO - Cleaning up
> >
> > Set 'tap0' nonpersistent
> >
> >
> >
> > Thank you for your help,
> >
> > Steve
> >
> >
> >
> >
> >
> >
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#57957): https://lists.yoctoproject.org/g/yocto/message/57957
> Mute This Topic: https://lists.yoctoproject.org/mt/93368526/1686489
> Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto
> Mute #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell
> Mute #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86-64
> Group Owner: yocto+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [alex.kanavin@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>

RE: [yocto] #yocto #dunfell #qemux86-64

[Monsees, Steven C (US)]

One final question, does this issue exist in kirkstone-4.0.2 ?

Thanks,
Steve

-----Original Message-----
From: Alexander Kanavin <alex.kanavin@gmail.com> 
Sent: Wednesday, August 31, 2022 7:42 AM
To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
Cc: yocto@lists.yoctoproject.org
Subject: Re: [yocto] #yocto #dunfell #qemux86-64

External Email Alert

This email has been sent from an account outside of the BAE Systems network.

Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.


I need to see the errors to give a useful answer. If you want wayland, use core-image-weston as the image.

Alex

On Wed, 31 Aug 2022 at 13:37, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
>
>
> Thank you for the quick replay...
>
> The no graphic option does work but the kernel comes up with errors...
>
> Will full wayland support be added to the dunfell release ?
>
> Steve
>
> -----Original Message-----
> From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On 
> Behalf Of Alexander Kanavin
> Sent: Wednesday, August 31, 2022 7:23 AM
> To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> Cc: yocto@lists.yoctoproject.org
> Subject: Re: [yocto] #yocto #dunfell #qemux86-64
>
> External Email Alert
>
> This email has been sent from an account outside of the BAE Systems network.
>
> Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.
>
>
> You need to run this in a X11 session, or use 'nographic' parameter.
>
> Alex
>
> On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
> >
> >
> >
> > Hello:
> >
> >
> >
> > I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
> >
> >
> >
> > When building the default : core-image-minimal or core-image-sato, 
> > clean with no errors/warnings, on execution
> >
> > I get the following error for both (see below)…
> >
> >
> >
> > (1)    Is this an issue with the release ?,  and is there another release I should be using ?
> >
> > (2)    Is there something I need to pre-configure for these builds to run properly ?
> >
> > (3)    How might I resolve this issue ?
> >
> >
> >
> > 06:57 smonsees@yix490016
> > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dun
> > fe
> > ll_Min>runqemu qemux86-64
> >
> > runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
> >
> > runqemu - INFO - Continuing with the following parameters:
> >
> > KERNEL:
> > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/du
> > nf 
> > ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fe
> > cb 08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
> >
> > MACHINE: [qemux86-64]
> >
> > FSTYPE: [ext4]
> >
> > ROOTFS:
> > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/du
> > nf
> > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-2
> > 02
> > 20830151817.rootfs.ext4]
> >
> > CONFFILE:
> > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/du
> > nf
> > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-2
> > 02
> > 20830151817.qemuboot.conf]
> >
> >
> >
> > runqemu - INFO - Setting up tap interface under sudo
> >
> > [sudo] password for smonsees:
> >
> > runqemu - INFO - Network configuration:
> > ip=192.168.7.2::192.168.7.1:255.255.255.0
> >
> > runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
> >
> >
> >
> > runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 
> > not
> > available) - exiting
> >
> >
> >
> > runqemu - INFO - Cleaning up
> >
> > Set 'tap0' nonpersistent
> >
> >
> >
> > Thank you for your help,
> >
> > Steve
> >
> >
> >
> >
> >
> >
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#57957): 
> https://lists.yoctoproject.org/g/yocto/message/57957
> Mute This Topic: https://lists.yoctoproject.org/mt/93368526/1686489
> Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto
> Mute 
> #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell
> Mute 
> #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86
> -64 Group Owner: yocto+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub 
> [alex.kanavin@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>

Re: [yocto] #yocto #dunfell #qemux86-64

[Alexander Kanavin]

The issue is on your side, not on yocto's. By default qemu is
configured to show graphical output in a X11 window, so you need to
run it in a X11 session, with correctly set DISPLAY environment
variable.

Alex

On Wed, 31 Aug 2022 at 14:10, Monsees, Steven C (US)
<steven.monsees@baesystems.com> wrote:
>
>
> One final question, does this issue exist in kirkstone-4.0.2 ?
>
> Thanks,
> Steve
>
> -----Original Message-----
> From: Alexander Kanavin <alex.kanavin@gmail.com>
> Sent: Wednesday, August 31, 2022 7:42 AM
> To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> Cc: yocto@lists.yoctoproject.org
> Subject: Re: [yocto] #yocto #dunfell #qemux86-64
>
> External Email Alert
>
> This email has been sent from an account outside of the BAE Systems network.
>
> Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.
>
>
> I need to see the errors to give a useful answer. If you want wayland, use core-image-weston as the image.
>
> Alex
>
> On Wed, 31 Aug 2022 at 13:37, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
> >
> >
> > Thank you for the quick replay...
> >
> > The no graphic option does work but the kernel comes up with errors...
> >
> > Will full wayland support be added to the dunfell release ?
> >
> > Steve
> >
> > -----Original Message-----
> > From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On
> > Behalf Of Alexander Kanavin
> > Sent: Wednesday, August 31, 2022 7:23 AM
> > To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> > Cc: yocto@lists.yoctoproject.org
> > Subject: Re: [yocto] #yocto #dunfell #qemux86-64
> >
> > External Email Alert
> >
> > This email has been sent from an account outside of the BAE Systems network.
> >
> > Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.
> >
> >
> > You need to run this in a X11 session, or use 'nographic' parameter.
> >
> > Alex
> >
> > On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
> > >
> > >
> > >
> > > Hello:
> > >
> > >
> > >
> > > I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
> > >
> > >
> > >
> > > When building the default : core-image-minimal or core-image-sato,
> > > clean with no errors/warnings, on execution
> > >
> > > I get the following error for both (see below)…
> > >
> > >
> > >
> > > (1)    Is this an issue with the release ?,  and is there another release I should be using ?
> > >
> > > (2)    Is there something I need to pre-configure for these builds to run properly ?
> > >
> > > (3)    How might I resolve this issue ?
> > >
> > >
> > >
> > > 06:57 smonsees@yix490016
> > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dun
> > > fe
> > > ll_Min>runqemu qemux86-64
> > >
> > > runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
> > >
> > > runqemu - INFO - Continuing with the following parameters:
> > >
> > > KERNEL:
> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/du
> > > nf
> > > ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fe
> > > cb 08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
> > >
> > > MACHINE: [qemux86-64]
> > >
> > > FSTYPE: [ext4]
> > >
> > > ROOTFS:
> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/du
> > > nf
> > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-2
> > > 02
> > > 20830151817.rootfs.ext4]
> > >
> > > CONFFILE:
> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/du
> > > nf
> > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-2
> > > 02
> > > 20830151817.qemuboot.conf]
> > >
> > >
> > >
> > > runqemu - INFO - Setting up tap interface under sudo
> > >
> > > [sudo] password for smonsees:
> > >
> > > runqemu - INFO - Network configuration:
> > > ip=192.168.7.2::192.168.7.1:255.255.255.0
> > >
> > > runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
> > >
> > >
> > >
> > > runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11
> > > not
> > > available) - exiting
> > >
> > >
> > >
> > > runqemu - INFO - Cleaning up
> > >
> > > Set 'tap0' nonpersistent
> > >
> > >
> > >
> > > Thank you for your help,
> > >
> > > Steve
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > -=-=-=-=-=-=-=-=-=-=-=-
> > Links: You receive all messages sent to this group.
> > View/Reply Online (#57957):
> > https://lists.yoctoproject.org/g/yocto/message/57957
> > Mute This Topic: https://lists.yoctoproject.org/mt/93368526/1686489
> > Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto
> > Mute
> > #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell
> > Mute
> > #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86
> > -64 Group Owner: yocto+owner@lists.yoctoproject.org
> > Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
> > [alex.kanavin@gmail.com]
> > -=-=-=-=-=-=-=-=-=-=-=-
> >

RE: [yocto] #yocto #dunfell #qemux86-64

[Monsees, Steven C (US)]

I will have to double check, but the issue did not appear under zeus... 
so qemu changed sometime after zeus ?

-----Original Message-----
From: Alexander Kanavin <alex.kanavin@gmail.com> 
Sent: Wednesday, August 31, 2022 8:12 AM
To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
Cc: yocto@lists.yoctoproject.org
Subject: Re: [yocto] #yocto #dunfell #qemux86-64

External Email Alert

This email has been sent from an account outside of the BAE Systems network.

Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.


The issue is on your side, not on yocto's. By default qemu is configured to show graphical output in a X11 window, so you need to run it in a X11 session, with correctly set DISPLAY environment variable.

Alex

On Wed, 31 Aug 2022 at 14:10, Monsees, Steven C (US) <steven.monsees@baesystems.com> wrote:
>
>
> One final question, does this issue exist in kirkstone-4.0.2 ?
>
> Thanks,
> Steve
>
> -----Original Message-----
> From: Alexander Kanavin <alex.kanavin@gmail.com>
> Sent: Wednesday, August 31, 2022 7:42 AM
> To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> Cc: yocto@lists.yoctoproject.org
> Subject: Re: [yocto] #yocto #dunfell #qemux86-64
>
> External Email Alert
>
> This email has been sent from an account outside of the BAE Systems network.
>
> Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.
>
>
> I need to see the errors to give a useful answer. If you want wayland, use core-image-weston as the image.
>
> Alex
>
> On Wed, 31 Aug 2022 at 13:37, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
> >
> >
> > Thank you for the quick replay...
> >
> > The no graphic option does work but the kernel comes up with errors...
> >
> > Will full wayland support be added to the dunfell release ?
> >
> > Steve
> >
> > -----Original Message-----
> > From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On 
> > Behalf Of Alexander Kanavin
> > Sent: Wednesday, August 31, 2022 7:23 AM
> > To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> > Cc: yocto@lists.yoctoproject.org
> > Subject: Re: [yocto] #yocto #dunfell #qemux86-64
> >
> > External Email Alert
> >
> > This email has been sent from an account outside of the BAE Systems network.
> >
> > Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.
> >
> >
> > You need to run this in a X11 session, or use 'nographic' parameter.
> >
> > Alex
> >
> > On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
> > >
> > >
> > >
> > > Hello:
> > >
> > >
> > >
> > > I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
> > >
> > >
> > >
> > > When building the default : core-image-minimal or core-image-sato, 
> > > clean with no errors/warnings, on execution
> > >
> > > I get the following error for both (see below)…
> > >
> > >
> > >
> > > (1)    Is this an issue with the release ?,  and is there another release I should be using ?
> > >
> > > (2)    Is there something I need to pre-configure for these builds to run properly ?
> > >
> > > (3)    How might I resolve this issue ?
> > >
> > >
> > >
> > > 06:57 smonsees@yix490016
> > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/d
> > > un
> > > fe
> > > ll_Min>runqemu qemux86-64
> > >
> > > runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
> > >
> > > runqemu - INFO - Continuing with the following parameters:
> > >
> > > KERNEL:
> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/
> > > du
> > > nf
> > > ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3
> > > fe cb 08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
> > >
> > > MACHINE: [qemux86-64]
> > >
> > > FSTYPE: [ext4]
> > >
> > > ROOTFS:
> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/
> > > du
> > > nf
> > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64
> > > -2
> > > 02
> > > 20830151817.rootfs.ext4]
> > >
> > > CONFFILE:
> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/
> > > du
> > > nf
> > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64
> > > -2
> > > 02
> > > 20830151817.qemuboot.conf]
> > >
> > >
> > >
> > > runqemu - INFO - Setting up tap interface under sudo
> > >
> > > [sudo] password for smonsees:
> > >
> > > runqemu - INFO - Network configuration:
> > > ip=192.168.7.2::192.168.7.1:255.255.255.0
> > >
> > > runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
> > >
> > >
> > >
> > > runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 
> > > not
> > > available) - exiting
> > >
> > >
> > >
> > > runqemu - INFO - Cleaning up
> > >
> > > Set 'tap0' nonpersistent
> > >
> > >
> > >
> > > Thank you for your help,
> > >
> > > Steve
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > -=-=-=-=-=-=-=-=-=-=-=-
> > Links: You receive all messages sent to this group.
> > View/Reply Online (#57957):
> > https://lists.yoctoproject.org/g/yocto/message/57957
> > Mute This Topic: https://lists.yoctoproject.org/mt/93368526/1686489
> > Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto
> > Mute
> > #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell
> > Mute
> > #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux
> > 86
> > -64 Group Owner: yocto+owner@lists.yoctoproject.org
> > Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
> > [alex.kanavin@gmail.com]
> > -=-=-=-=-=-=-=-=-=-=-=-
> >

Re: [yocto] #yocto #dunfell #qemux86-64

[Pavel Zhukov]

"Monsees, Steven C (US) via lists.yoctoproject.org" <steven.monsees=baesystems.com@lists.yoctoproject.org> writes:

> I will have to double check, but the issue did not appear under zeus... 
> so qemu changed sometime after zeus ?
Not qemu but runqemu script has been changed not so long time ago (this
year) to pass `-display sdl` parameter unless nographic option has been 
specified. As it was mentioned you have to pass -nographic to use
runqemu without SDL frontend

>
> -----Original Message-----
> From: Alexander Kanavin <alex.kanavin@gmail.com> 
> Sent: Wednesday, August 31, 2022 8:12 AM
> To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> Cc: yocto@lists.yoctoproject.org
> Subject: Re: [yocto] #yocto #dunfell #qemux86-64
>
> External Email Alert
>
> This email has been sent from an account outside of the BAE Systems network.
>
> Please treat the email with caution, especially if you are requested
> to click on a link, decrypt/open an attachment, or enable macros.  For
> further information on how to spot phishing, access “Cybersecurity
> OneSpace Page” and report phishing by clicking the button “Report
> Phishing” on the Outlook toolbar.
>
>
> The issue is on your side, not on yocto's. By default qemu is
> configured to show graphical output in a X11 window, so you need to
> run it in a X11 session, with correctly set DISPLAY environment
> variable.
>
> Alex
>
> On Wed, 31 Aug 2022 at 14:10, Monsees, Steven C (US) <steven.monsees@baesystems.com> wrote:
>>
>>
>> One final question, does this issue exist in kirkstone-4.0.2 ?
>>
>> Thanks,
>> Steve
>>
>> -----Original Message-----
>> From: Alexander Kanavin <alex.kanavin@gmail.com>
>> Sent: Wednesday, August 31, 2022 7:42 AM
>> To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
>> Cc: yocto@lists.yoctoproject.org
>> Subject: Re: [yocto] #yocto #dunfell #qemux86-64
>>
>> External Email Alert
>>
>> This email has been sent from an account outside of the BAE Systems network.
>>
>> Please treat the email with caution, especially if you are requested
>> to click on a link, decrypt/open an attachment, or enable macros.
>> For further information on how to spot phishing, access
>> “Cybersecurity OneSpace Page” and report phishing by clicking the
>> button “Report Phishing” on the Outlook toolbar.
>>
>>
>> I need to see the errors to give a useful answer. If you want wayland, use core-image-weston as the image.
>>
>> Alex
>>
>> On Wed, 31 Aug 2022 at 13:37, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
>> >
>> >
>> > Thank you for the quick replay...
>> >
>> > The no graphic option does work but the kernel comes up with errors...
>> >
>> > Will full wayland support be added to the dunfell release ?
>> >
>> > Steve
>> >
>> > -----Original Message-----
>> > From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On 
>> > Behalf Of Alexander Kanavin
>> > Sent: Wednesday, August 31, 2022 7:23 AM
>> > To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
>> > Cc: yocto@lists.yoctoproject.org
>> > Subject: Re: [yocto] #yocto #dunfell #qemux86-64
>> >
>> > External Email Alert
>> >
>> > This email has been sent from an account outside of the BAE Systems network.
>> >
>> > Please treat the email with caution, especially if you are
>> > requested to click on a link, decrypt/open an attachment, or
>> > enable macros.  For further information on how to spot phishing,
>> > access “Cybersecurity OneSpace Page” and report phishing by
>> > clicking the button “Report Phishing” on the Outlook toolbar.
>> >
>> >
>> > You need to run this in a X11 session, or use 'nographic' parameter.
>> >
>> > Alex
>> >
>> > On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
>> > >
>> > >
>> > >
>> > > Hello:
>> > >
>> > >
>> > >
>> > > I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
>> > >
>> > >
>> > >
>> > > When building the default : core-image-minimal or core-image-sato, 
>> > > clean with no errors/warnings, on execution
>> > >
>> > > I get the following error for both (see below)…
>> > >
>> > >
>> > >
>> > > (1)    Is this an issue with the release ?,  and is there another release I should be using ?
>> > >
>> > > (2)    Is there something I need to pre-configure for these builds to run properly ?
>> > >
>> > > (3)    How might I resolve this issue ?
>> > >
>> > >
>> > >
>> > > 06:57 smonsees@yix490016
>> > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/d
>> > > un
>> > > fe
>> > > ll_Min>runqemu qemux86-64
>> > >
>> > > runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
>> > >
>> > > runqemu - INFO - Continuing with the following parameters:
>> > >
>> > > KERNEL:
>> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/
>> > > du
>> > > nf
>> > > ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3
>> > > fe cb 08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
>> > >
>> > > MACHINE: [qemux86-64]
>> > >
>> > > FSTYPE: [ext4]
>> > >
>> > > ROOTFS:
>> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/
>> > > du
>> > > nf
>> > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64
>> > > -2
>> > > 02
>> > > 20830151817.rootfs.ext4]
>> > >
>> > > CONFFILE:
>> > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/
>> > > du
>> > > nf
>> > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64
>> > > -2
>> > > 02
>> > > 20830151817.qemuboot.conf]
>> > >
>> > >
>> > >
>> > > runqemu - INFO - Setting up tap interface under sudo
>> > >
>> > > [sudo] password for smonsees:
>> > >
>> > > runqemu - INFO - Network configuration:
>> > > ip=192.168.7.2::192.168.7.1:255.255.255.0
>> > >
>> > > runqemu - INFO - Running
>> > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64
>> > > -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev
>> > > tap,id=net0,ifname=tap0,script=no,downscript=no -drive
>> > > file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw
>> > > -show-cursor -usb -device usb-tablet -object
>> > > rng-random,filename=/dev/urandom,id=rng0 -device
>> > > virtio-rng-pci,rng=rng0 -cpu core2duo -m 256 -serial mon:vc
>> > > -serial null -kernel
>> > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin
>> > > -append 'root=/dev/vda rw mem=256M
>> > > ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
>> > >
>> > >
>> > >
>> > > runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 
>> > > not
>> > > available) - exiting
>> > >
>> > >
>> > >
>> > > runqemu - INFO - Cleaning up
>> > >
>> > > Set 'tap0' nonpersistent
>> > >
>> > >
>> > >
>> > > Thank you for your help,
>> > >
>> > > Steve
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>> > 
>> >
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#57961): https://lists.yoctoproject.org/g/yocto/message/57961
> Mute This Topic: https://lists.yoctoproject.org/mt/93368526/6390638
> Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto
> Mute #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell
> Mute #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86-64
> Group Owner: yocto+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [pavel@zhukoff.net]
> -=-=-=-=-=-=-=-=-=-=-=-

Re: [yocto] #yocto #dunfell #qemux86-64

[Khem Raj]

[-- Attachment #1.1.1: Type: text/plain, Size: 5378 bytes --]

On 8/31/22 4:36 AM, Monsees, Steven C (US) via lists.yoctoproject.org wrote:
> 
> Thank you for the quick replay...
> 
> The no graphic option does work but the kernel comes up with errors...
> 
> Will full wayland support be added to the dunfell release ?
> 

you can use vnc backend which is enabled by default. by using
runqemu publicvnc

I wish runqemu was smart enough to prioritize, interactive UI e.g. 
sdl/gtk if not available then fall back to vnc, and then use nographic
in order.

and please look at kirkstone if you are evaluating next LTS, dunfell is 
still supported but is already inching towards its end comparatively you 
get more modern package versions with kirkstone.

> Steve
> 
> -----Original Message-----
> From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On Behalf Of Alexander Kanavin
> Sent: Wednesday, August 31, 2022 7:23 AM
> To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> Cc: yocto@lists.yoctoproject.org
> Subject: Re: [yocto] #yocto #dunfell #qemux86-64
> 
> External Email Alert
> 
> This email has been sent from an account outside of the BAE Systems network.
> 
> Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.
> 
> 
> You need to run this in a X11 session, or use 'nographic' parameter.
> 
> Alex
> 
> On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
>>
>>
>>
>> Hello:
>>
>>
>>
>> I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
>>
>>
>>
>> When building the default : core-image-minimal or core-image-sato,
>> clean with no errors/warnings, on execution
>>
>> I get the following error for both (see below)…
>>
>>
>>
>> (1)    Is this an issue with the release ?,  and is there another release I should be using ?
>>
>> (2)    Is there something I need to pre-configure for these builds to run properly ?
>>
>> (3)    How might I resolve this issue ?
>>
>>
>>
>> 06:57 smonsees@yix490016
>> /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfe
>> ll_Min>runqemu qemux86-64
>>
>> runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
>>
>> runqemu - INFO - Continuing with the following parameters:
>>
>> KERNEL:
>> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
>> ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb
>> 08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
>>
>> MACHINE: [qemux86-64]
>>
>> FSTYPE: [ext4]
>>
>> ROOTFS:
>> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
>> ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-202
>> 20830151817.rootfs.ext4]
>>
>> CONFFILE:
>> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
>> ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-202
>> 20830151817.qemuboot.conf]
>>
>>
>>
>> runqemu - INFO - Setting up tap interface under sudo
>>
>> [sudo] password for smonsees:
>>
>> runqemu - INFO - Network configuration:
>> ip=192.168.7.2::192.168.7.1:255.255.255.0
>>
>> runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
>>
>>
>>
>> runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 not
>> available) - exiting
>>
>>
>>
>> runqemu - INFO - Cleaning up
>>
>> Set 'tap0' nonpersistent
>>
>>
>>
>> Thank you for your help,
>>
>> Steve
>>
>>
>>
>>
>>
>>
>>
>>
>> -=-=-=-=-=-=-=-=-=-=-=-
>> Links: You receive all messages sent to this group.
>> You automatically follow any topics you start or reply to.
>> View/Reply Online (#57957): https://lists.yoctoproject.org/g/yocto/message/57957
>> Mute This Topic: https://lists.yoctoproject.org/mt/93368526/1997914
>> Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto
>> Mute #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell
>> Mute #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86-64
>> Group Owner: yocto+owner@lists.yoctoproject.org
>> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [raj.khem@gmail.com]
>> -=-=-=-=-=-=-=-=-=-=-=-
>>

[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 2613 bytes --]

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 203 bytes --]

RE: [yocto] #yocto #dunfell #qemux86-64

[Monsees, Steven C (US)]

Thank you, and I am looking at kirkstone...

-----Original Message-----
From: Khem Raj <raj.khem@gmail.com> 
Sent: Wednesday, August 31, 2022 12:38 PM
To: Monsees, Steven C (US) <steven.monsees@baesystems.com>; Alexander Kanavin <alex.kanavin@gmail.com>
Cc: yocto@lists.yoctoproject.org
Subject: Re: [yocto] #yocto #dunfell #qemux86-64

On 8/31/22 4:36 AM, Monsees, Steven C (US) via lists.yoctoproject.org wrote:
> 
> Thank you for the quick replay...
> 
> The no graphic option does work but the kernel comes up with errors...
> 
> Will full wayland support be added to the dunfell release ?
> 

you can use vnc backend which is enabled by default. by using runqemu publicvnc

I wish runqemu was smart enough to prioritize, interactive UI e.g. 
sdl/gtk if not available then fall back to vnc, and then use nographic in order.

and please look at kirkstone if you are evaluating next LTS, dunfell is still supported but is already inching towards its end comparatively you get more modern package versions with kirkstone.

> Steve
> 
> -----Original Message-----
> From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On 
> Behalf Of Alexander Kanavin
> Sent: Wednesday, August 31, 2022 7:23 AM
> To: Monsees, Steven C (US) <steven.monsees@baesystems.com>
> Cc: yocto@lists.yoctoproject.org
> Subject: Re: [yocto] #yocto #dunfell #qemux86-64
> 
> External Email Alert
> 
> This email has been sent from an account outside of the BAE Systems network.
> 
> Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros.  For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar.
> 
> 
> You need to run this in a X11 session, or use 'nographic' parameter.
> 
> Alex
> 
> On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via lists.yoctoproject.org <steven.monsees=baesystems.com@lists.yoctoproject.org> wrote:
>>
>>
>>
>> Hello:
>>
>>
>>
>> I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.
>>
>>
>>
>> When building the default : core-image-minimal or core-image-sato, 
>> clean with no errors/warnings, on execution
>>
>> I get the following error for both (see below)…
>>
>>
>>
>> (1)    Is this an issue with the release ?,  and is there another release I should be using ?
>>
>> (2)    Is there something I need to pre-configure for these builds to run properly ?
>>
>> (3)    How might I resolve this issue ?
>>
>>
>>
>> 06:57 smonsees@yix490016
>> /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf
>> e
>> ll_Min>runqemu qemux86-64
>>
>> runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
>>
>> runqemu - INFO - Continuing with the following parameters:
>>
>> KERNEL:
>> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dun
>> f 
>> ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fec
>> b 08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
>>
>> MACHINE: [qemux86-64]
>>
>> FSTYPE: [ext4]
>>
>> ROOTFS:
>> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dun
>> f
>> ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20
>> 2
>> 20830151817.rootfs.ext4]
>>
>> CONFFILE:
>> [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dun
>> f
>> ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20
>> 2
>> 20830151817.qemuboot.conf]
>>
>>
>>
>> runqemu - INFO - Setting up tap interface under sudo
>>
>> [sudo] password for smonsees:
>>
>> runqemu - INFO - Network configuration:
>> ip=192.168.7.2::192.168.7.1:255.255.255.0
>>
>> runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '
>>
>>
>>
>> runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 
>> not
>> available) - exiting
>>
>>
>>
>> runqemu - INFO - Cleaning up
>>
>> Set 'tap0' nonpersistent
>>
>>
>>
>> Thank you for your help,
>>
>> Steve
>>
>>
>>
>>
>>
>>
>>
>>
>> -=-=-=-=-=-=-=-=-=-=-=-
>> Links: You receive all messages sent to this group.
>> You automatically follow any topics you start or reply to.
>> View/Reply Online (#57957): 
>> https://lists.yoctoproject.org/g/yocto/message/57957
>> Mute This Topic: https://lists.yoctoproject.org/mt/93368526/1997914
>> Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto
>> Mute 
>> #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell
>> Mute 
>> #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux8
>> 6-64 Group Owner: yocto+owner@lists.yoctoproject.org
>> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub 
>> [raj.khem@gmail.com]
>> -=-=-=-=-=-=-=-=-=-=-=-
>>