Re: [yocto] QA notification for completed autobuilder build (yocto-4.3.rc1)

["Alexis Lothoré" <alexis.lothore@bootlin.com>]

Hello,

On 10/18/23 08:16, Pokybuild User wrote:
> 
>     A build flagged for QA (yocto-4.3.rc1) was completed on the autobuilder and is available at:
> 
> 
>         https://autobuilder.yocto.io/pub/releases/yocto-4.3.rc1

The regression report looks worryingly empty. It has been generated with
yocto-4.2 as comparison base. When taking a look at yocto-testresults content
for it, I only find a few test results (11, while it should be something around
300). I am not sure yet if we did some mistakes while re-uploading manually
missing tests results during the 4.2 cycle, or if tests results are indeed
suffering some issues for release builds (this is repeatable on different 4.2.x
releases).

So in the mean time, here is a manual regression report between 4.3_M3 and
yocto-4.3.rc1:

https://pastebin.com/6QbfGstR

The report has a "rate limit" applied for noisy regression (patch incoming)

Kind regards,
Alexis

-- 
Alexis Lothoré, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com