* Yocto gdb build error on Microblaze platform
@ 2020-06-05 20:02 R Keith Beal
2020-06-05 20:23 ` [yocto] " Mark Hatle
0 siblings, 1 reply; 3+ messages in thread
From: R Keith Beal @ 2020-06-05 20:02 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 6207 bytes --]
Fellow Developers,
I am attempting to add gdb to a Yocto project based on Yocto 2.3 (Pyro).
The build complains about a missing libreadline.a.
*| make[2]: Leaving directory
'/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux/opcodes'*
*| make[2]: Entering directory
'/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux/gdb'*
*| make[2]: *** No rule to make target '../readline/libreadline.a',
needed by 'gdb'.Stop.*
*| make[2]: *** Waiting for unfinished jobs....*
I tried several solutions from related searches.
http://url1567.cmss.com/ls/click?upn=THw5ysdXae-2B-2Btp69CrkSktfnnmsBMoq2fcLowO1MzKn3wcqowiND-2FTX2Ck09GJGF11Hdqxt9-2BJySKGonPkx0-2FsBVZ74oHM4kelhYpa4edNE-3D8p2T_onOgH4hKli5v9BePnk5WifnzSD-2FkMXWD4UBJN0NMhyEtRPVSpGiaaE75TdAV5HSL3C5-2Fi5n-2BDKHGDeEkTPVb-2FcjU3hpChsPjc-2F1yV-2Fy-2FqYqvP0R0ga7sDTpc0xAErHOPta6wxiaAu6AxpdmfODDLShss6kwLSUrYDD-2Blu1f1t6JOIXb54UcLQ1jl-2Bt-2FM1Df2FGOUq2KT8E3r3P-2BJ339dtjkdSSHNILM4ZuiCObkRvoU-3D
http://url1567.cmss.com/ls/click?upn=THw5ysdXae-2B-2Btp69CrkSkhlnHi-2FYRYLnr3RlrnNZXmyK27CyplgiatU0F3nje-2FAXjDAERK7GpIYABqm2VrjanqpD9-2FFXkXtOSF1ZzOXINUA-3DoTvx_onOgH4hKli5v9BePnk5WifnzSD-2FkMXWD4UBJN0NMhyEtRPVSpGiaaE75TdAV5HSL3C5-2Fi5n-2BDKHGDeEkTPVb-2FRTx-2B4fNAXrHZKp3D4Q26gT1QyfMP2VyOgj0cWkVr0aAxCZq5nVYw-2F-2FW7z2B-2B-2BQTAgDm3JxjNhK9NyC2UMI1YkyOzY2m0cYgn4QjDv0YF1CFQtc3YGQpM7IDUxoZc8iNdpJqoB23dymTZ6InMsH9ebA-3D
Tried *PACKAGECONFIG_remove_pn-gdb = "readline"* but it does not help.
Tried adding *EXTRA_OECONF_append = " --without-system-readline"* to the
image recipe but it doesn’t help.**
From
/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/gdb-7.7.1/gdb/Makefile.in
*# Where is the READLINE library?Typically in ../readline.*
*READLINE_DIR = ../readline*
*READLINE_SRC = $(srcdir)/$(READLINE_DIR)*
*READLINE = @READLINE@*
*READLINE_DEPS = @READLINE_DEPS@*
*READLINE_CFLAGS = @READLINE_CFLAGS@*
I tried adding *PACKAGECONFIG_remove_pn-gdb = "readline"* to the
local.conf**
As a test, I manually built gdb’s local copy of readline and I get lots
of compile errors that look like some sort of version skew with the
thread library.
*| In file included from ../../gdb-7.7.1/gdb/proc-service.c:28:0:*
*| ../../gdb-7.7.1/gdb/gdb_proc_service.h:162:9: error: unknown type
name 'gdb_fpregset_t'*
*|typedef gdb_fpregset_t gdb_prfpregset_t;*
*|^~~~~~~~~~~~~~*
*| ../../gdb-7.7.1/gdb/proc-service.c:151:1: warning: no previous
prototype for 'ps_lgetxregsize' [-Wmissing-prototypes]*
*|ps_lgetxregsize (gdb_ps_prochandle_t ph, lwpid_t lwpid, int *xregsize)*
*|^~~~~~~~~~~~~~~*
*| ../../gdb-7.7.1/gdb/proc-service.c:161:1: warning: no previous
prototype for 'ps_lgetxregs' [-Wmissing-prototypes]*
*|ps_lgetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset)*
*|^~~~~~~~~~~~*
*| ../../gdb-7.7.1/gdb/proc-service.c:171:1: warning: no previous
prototype for 'ps_lsetxregs' [-Wmissing-prototypes]*
*|ps_lsetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset)*
*|^~~~~~~~~~~~*
*| ../../gdb-7.7.1/gdb/proc-service.c:180:1: warning: no previous
prototype for 'ps_plog' [-Wmissing-prototypes]*
*|ps_plog (const char *fmt, ...)*
*|^~~~~~~*
*| ../../gdb-7.7.1/gdb/proc-service.c:298:1: error: conflicting types
for 'ps_lgetfpregs'*
*|ps_lgetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,*
*|^~~~~~~~~~~~~*
*| In file included from ../../gdb-7.7.1/gdb/gdb_proc_service.h:25:0,*
*|from ../../gdb-7.7.1/gdb/proc-service.c:28:*
*|
/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/recipe-sysroot/usr/include/proc_service.h:61:17:
note: previous declaration of 'ps_lgetfpregs' was here*
*|extern ps_err_e ps_lgetfpregs (struct ps_prochandle *,*
*|^~~~~~~~~~~~~*
*| ../../gdb-7.7.1/gdb/proc-service.c:318:1: error: conflicting types
for 'ps_lsetfpregs'*
*|ps_lsetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,*
*|^~~~~~~~~~~~~*
*| In file included from ../../gdb-7.7.1/gdb/gdb_proc_service.h:25:0,*
*|from ../../gdb-7.7.1/gdb/proc-service.c:28:*
*|
/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/recipe-sysroot/usr/include/proc_service.h:63:17:
note: previous declaration of 'ps_lsetfpregs' was here*
*|extern ps_err_e ps_lsetfpregs (struct ps_prochandle *,*
*|^~~~~~~~~~~~~*
*| ERROR: oe_runmake failed*
*| Makefile:1011: recipe for target 'proc-service.o' failed*
*| make[2]: *** [proc-service.o] Error 1*
*| make[2]: *** Waiting for unfinished jobs....*
*| In file included from ../../gdb-7.7.1/gdb/linux-thread-db.c:24:0:*
*| ../../gdb-7.7.1/gdb/gdb_proc_service.h:162:9: error: unknown type
name 'gdb_fpregset_t'*
*|typedef gdb_fpregset_t gdb_prfpregset_t;*
*|^~~~~~~~~~~~~~*
*| Makefile:1011: recipe for target 'linux-thread-db.o' failed*
*| make[2]: *** [linux-thread-db.o] Error 1*
*| make[2]: Leaving directory
'/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux/gdb'*
*| Makefile:8278: recipe for target 'all-gdb' failed*
*| make[1]: *** [all-gdb] Error 2*
*| make[1]: Leaving directory
'/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux'*
*| Makefile:832: recipe for target 'all' failed*
*| make: *** [all] Error 2*
*| WARNING:
/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/temp/run.do_compile.18533:1exit
1 from 'exit 1'*
*| ERROR: Function failed: do_compile (log file is located at
/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/temp/log.do_compile.18533)*
*ERROR**: Task
(/opt/yocto/poky/meta-xilinx/recipes-microblaze/gdb/gdb_7.7.1.bb:do_compile)
failed with exit code '1'*
[-- Attachment #2: Type: text/html, Size: 100071 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [yocto] Yocto gdb build error on Microblaze platform
2020-06-05 20:02 Yocto gdb build error on Microblaze platform R Keith Beal
@ 2020-06-05 20:23 ` Mark Hatle
2020-06-06 1:28 ` Khem Raj
0 siblings, 1 reply; 3+ messages in thread
From: Mark Hatle @ 2020-06-05 20:23 UTC (permalink / raw)
To: R Keith Beal, yocto
This could be an issue with your host if the host is too old. Unfortunately
I've not worked with the releases that are that old.
However, Xilinx did just release their 'Zeus' based rel-v2020.1 version. That
version should work on most modern hosts (ones that Zeus works against.) Even
if you are debugging older code the newer debugger should work, so it might be
an option for you.
--Mark
On 6/5/20 3:02 PM, R Keith Beal wrote:
> Fellow Developers,
>
>
> I am attempting to add gdb to a Yocto project based on Yocto 2.3 (Pyro).
>
> The build complains about a missing libreadline.a.
>
>
> *| make[2]: Leaving directory
> '/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux/opcodes'*
>
> *| make[2]: Entering directory
> '/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux/gdb'*
>
> *| make[2]: *** No rule to make target '../readline/libreadline.a', needed by
> 'gdb'. Stop.*
>
> *| make[2]: *** Waiting for unfinished jobs....*
>
>
>
> I tried several solutions from related searches.
>
> https://www.yoctoproject.org/pipermail/yocto/2017-June/036676.html
> <http://url1567.cmss.com/ls/click?upn=THw5ysdXae-2B-2Btp69CrkSktfnnmsBMoq2fcLowO1MzKn3wcqowiND-2FTX2Ck09GJGF11Hdqxt9-2BJySKGonPkx0-2FvLNAXTq0WYwTE0-2B6Uyz0Q0-3Ds3H8_onOgH4hKli5v9BePnk5WifnzSD-2FkMXWD4UBJN0NMhyEtRPVSpGiaaE75TdAV5HSL3C5-2Fi5n-2BDKHGDeEkTPVb-2Fb7gapUyik7iAzbey0Nv6Nh1PPsPq0e6zs-2FHGTQciMLMokCWW2i0XDtIP1PxZS-2FBaX9nG8vzU0xSEsOh5-2B-2BNrbSSvAUSyjTopTajwQc0OlCGBRmdkOAlI4rLI2-2FbXadatAeHM2ppplObheY876Um-2F7s-3D>
>
> https://yocto.yoctoproject.narkive.com/gUVw5u2k/failed-to-build-gdb
> <http://url1567.cmss.com/ls/click?upn=THw5ysdXae-2B-2Btp69CrkSkhlnHi-2FYRYLnr3RlrnNZXmyK27CyplgiatU0F3nje-2FAXjDAERK7GpIYABqm2VrjansniTichrksQOsPzjrfGRnQ-3D3jnn_onOgH4hKli5v9BePnk5WifnzSD-2FkMXWD4UBJN0NMhyEtRPVSpGiaaE75TdAV5HSL3C5-2Fi5n-2BDKHGDeEkTPVb-2FROKHNngrTHmIDyLyzUDU4zrfMIpo78C2wBlDsxv8-2BZrviAWCn1byCAfT7YiEftQVK3DN3LssMFNwtjmKXL-2FfZ3nlLFAqjcUW5B7S21IzlkqE9-2BhkLOYjNKhAmXnXDCrWhn8go40EayViSLFCcW2bIE-3D>
>
>
>
> Tried *PACKAGECONFIG_remove_pn-gdb = "readline"* but it does not help.
>
> Tried adding *EXTRA_OECONF_append = " --without-system-readline"* to the image
> recipe but it doesn’t help.**
>
>
>
> From
> /opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/gdb-7.7.1/gdb/Makefile.in
>
> *# Where is the READLINE library? Typically in ../readline.*
>
> *READLINE_DIR = ../readline*
>
> *READLINE_SRC = $(srcdir)/$(READLINE_DIR)*
>
> *READLINE = @READLINE@*
>
> *READLINE_DEPS = @READLINE_DEPS@*
>
> *READLINE_CFLAGS = @READLINE_CFLAGS@*
>
>
>
> I tried adding *PACKAGECONFIG_remove_pn-gdb = "readline"* to the local.conf**
>
>
> As a test, I manually built gdb’s local copy of readline and I get lots of
> compile errors that look like some sort of version skew with the thread library.
>
> *| In file included from ../../gdb-7.7.1/gdb/proc-service.c:28:0:*
>
> *| ../../gdb-7.7.1/gdb/gdb_proc_service.h:162:9: error: unknown type name
> 'gdb_fpregset_t'*
>
> *| typedef gdb_fpregset_t gdb_prfpregset_t;*
>
> *| ^~~~~~~~~~~~~~*
>
> *| ../../gdb-7.7.1/gdb/proc-service.c:151:1: warning: no previous prototype for
> 'ps_lgetxregsize' [-Wmissing-prototypes]*
>
> *| ps_lgetxregsize (gdb_ps_prochandle_t ph, lwpid_t lwpid, int *xregsize)*
>
> *| ^~~~~~~~~~~~~~~*
>
> *| ../../gdb-7.7.1/gdb/proc-service.c:161:1: warning: no previous prototype for
> 'ps_lgetxregs' [-Wmissing-prototypes]*
>
> *| ps_lgetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset)*
>
> *| ^~~~~~~~~~~~*
>
> *| ../../gdb-7.7.1/gdb/proc-service.c:171:1: warning: no previous prototype for
> 'ps_lsetxregs' [-Wmissing-prototypes]*
>
> *| ps_lsetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset)*
>
> *| ^~~~~~~~~~~~*
>
> *| ../../gdb-7.7.1/gdb/proc-service.c:180:1: warning: no previous prototype for
> 'ps_plog' [-Wmissing-prototypes]*
>
> *| ps_plog (const char *fmt, ...)*
>
> *| ^~~~~~~*
>
> *| ../../gdb-7.7.1/gdb/proc-service.c:298:1: error: conflicting types for
> 'ps_lgetfpregs'*
>
> *| ps_lgetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,*
>
> *| ^~~~~~~~~~~~~*
>
> *| In file included from ../../gdb-7.7.1/gdb/gdb_proc_service.h:25:0,*
>
> *| from ../../gdb-7.7.1/gdb/proc-service.c:28:*
>
> *|
> /opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/recipe-sysroot/usr/include/proc_service.h:61:17:
> note: previous declaration of 'ps_lgetfpregs' was here*
>
> *| extern ps_err_e ps_lgetfpregs (struct ps_prochandle *,*
>
> *| ^~~~~~~~~~~~~*
>
> *| ../../gdb-7.7.1/gdb/proc-service.c:318:1: error: conflicting types for
> 'ps_lsetfpregs'*
>
> *| ps_lsetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,*
>
> *| ^~~~~~~~~~~~~*
>
> *| In file included from ../../gdb-7.7.1/gdb/gdb_proc_service.h:25:0,*
>
> *| from ../../gdb-7.7.1/gdb/proc-service.c:28:*
>
> *|
> /opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/recipe-sysroot/usr/include/proc_service.h:63:17:
> note: previous declaration of 'ps_lsetfpregs' was here*
>
> *| extern ps_err_e ps_lsetfpregs (struct ps_prochandle *,*
>
> *| ^~~~~~~~~~~~~*
>
> *| ERROR: oe_runmake failed*
>
> *| Makefile:1011: recipe for target 'proc-service.o' failed*
>
> *| make[2]: *** [proc-service.o] Error 1*
>
> *| make[2]: *** Waiting for unfinished jobs....*
>
> *| In file included from ../../gdb-7.7.1/gdb/linux-thread-db.c:24:0:*
>
> *| ../../gdb-7.7.1/gdb/gdb_proc_service.h:162:9: error: unknown type name
> 'gdb_fpregset_t'*
>
> *| typedef gdb_fpregset_t gdb_prfpregset_t;*
>
> *| ^~~~~~~~~~~~~~*
>
> *| Makefile:1011: recipe for target 'linux-thread-db.o' failed*
>
> *| make[2]: *** [linux-thread-db.o] Error 1*
>
> *| make[2]: Leaving directory
> '/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux/gdb'*
>
> *| Makefile:8278: recipe for target 'all-gdb' failed*
>
> *| make[1]: *** [all-gdb] Error 2*
>
> *| make[1]: Leaving directory
> '/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux'*
>
> *| Makefile:832: recipe for target 'all' failed*
>
> *| make: *** [all] Error 2*
>
> *| WARNING:
> /opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/temp/run.do_compile.18533:1exit
> 1 from 'exit 1'*
>
> *| ERROR: Function failed: do_compile (log file is located at
> /opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/temp/log.do_compile.18533)*
>
> *ERROR**: Task
> (/opt/yocto/poky/meta-xilinx/recipes-microblaze/gdb/gdb_7.7.1.bb:do_compile)
> failed with exit code '1'*
>
>
>
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [yocto] Yocto gdb build error on Microblaze platform
2020-06-05 20:23 ` [yocto] " Mark Hatle
@ 2020-06-06 1:28 ` Khem Raj
0 siblings, 0 replies; 3+ messages in thread
From: Khem Raj @ 2020-06-06 1:28 UTC (permalink / raw)
To: Mark Hatle, R Keith Beal, yocto
On 6/5/20 1:23 PM, Mark Hatle wrote:
> This could be an issue with your host if the host is too old. Unfortunately
> I've not worked with the releases that are that old.
>
> However, Xilinx did just release their 'Zeus' based rel-v2020.1 version. That
> version should work on most modern hosts (ones that Zeus works against.) Even
> if you are debugging older code the newer debugger should work, so it might be
> an option for you.
>
> --Mark
>
>
>
> On 6/5/20 3:02 PM, R Keith Beal wrote:
>> Fellow Developers,
>>
>>
>> I am attempting to add gdb to a Yocto project based on Yocto 2.3 (Pyro).
>>
>> The build complains about a missing libreadline.a.
>>
>>
>> *| make[2]: Leaving directory
>> '/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux/opcodes'*
>>
>> *| make[2]: Entering directory
>> '/opt/yocto/yocto-bwc/builds/microblazeel/tmp/work/microblazeel-v9.6-bs-cmp-mh-poky-linux/gdb/7.7.1-r0/build-microblazeel-poky-linux/gdb'*
>>
>> *| make[2]: *** No rule to make target '../readline/libreadline.a', needed by
>> 'gdb'. Stop.*
>>
>> *| make[2]: *** Waiting for unfinished jobs....*
>>
>>
>>
>> I tried several solutions from related searches.
>>
>> https://www.yoctoproject.org/pipermail/yocto/2017-June/036676.html
>> <http://url1567.cmss.com/ls/click?upn=THw5ysdXae-2B-2Btp69CrkSktfnnmsBMoq2fcLowO1MzKn3wcqowiND-2FTX2Ck09GJGF11Hdqxt9-2BJySKGonPkx0-2FvLNAXTq0WYwTE0-2B6Uyz0Q0-3Ds3H8_onOgH4hKli5v9BePnk5WifnzSD-2FkMXWD4UBJN0NMhyEtRPVSpGiaaE75TdAV5HSL3C5-2Fi5n-2BDKHGDeEkTPVb-2Fb7gapUyik7iAzbey0Nv6Nh1PPsPq0e6zs-2FHGTQciMLMokCWW2i0XDtIP1PxZS-2FBaX9nG8vzU0xSEsOh5-2B-2BNrbSSvAUSyjTopTajwQc0OlCGBRmdkOAlI4rLI2-2FbXadatAeHM2ppplObheY876Um-2F7s-3D>
>>
>> https://yocto.yoctoproject.narkive.com/gUVw5u2k/failed-to-build-gdb
>> <http://url1567.cmss.com/ls/click?upn=THw5ysdXae-2B-2Btp69CrkSkhlnHi-2FYRYLnr3RlrnNZXmyK27CyplgiatU0F3nje-2FAXjDAERK7GpIYABqm2VrjansniTichrksQOsPzjrfGRnQ-3D3jnn_onOgH4hKli5v9BePnk5WifnzSD-2FkMXWD4UBJN0NMhyEtRPVSpGiaaE75TdAV5HSL3C5-2Fi5n-2BDKHGDeEkTPVb-2FROKHNngrTHmIDyLyzUDU4zrfMIpo78C2wBlDsxv8-2BZrviAWCn1byCAfT7YiEftQVK3DN3LssMFNwtjmKXL-2FfZ3nlLFAqjcUW5B7S21IzlkqE9-2BhkLOYjNKhAmXnXDCrWhn8go40EayViSLFCcW2bIE-3D>
>>
>>
>>
>> Tried *PACKAGECONFIG_remove_pn-gdb = "readline"* but it does not help.
>>
>> Tried adding *EXTRA_OECONF_append = " --without-system-readline"* to the image
>> recipe but it doesn’t help.**
>>
>>
>>
Remove readline from PACKAGECONFIG and then
Can you try this patch
https://patchwork.openembedded.org/patch/116843/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-06-06 1:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-06-05 20:02 Yocto gdb build error on Microblaze platform R Keith Beal
2020-06-05 20:23 ` [yocto] " Mark Hatle
2020-06-06 1:28 ` Khem Raj
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox