* [parisc-linux] Got a machine, Got a Kernel Image, Got a Ramdisk Image, What's next?
@ 1999-11-16 14:23 Christopher L McNabb
1999-11-16 19:14 ` Stan Sieler
0 siblings, 1 reply; 3+ messages in thread
From: Christopher L McNabb @ 1999-11-16 14:23 UTC (permalink / raw)
To: parisc-linux
I've been using Intel Linux since version 0.99. My company recently retired
an HP-9000 model 832, which is now sitting here in my house. I would love
to help out with the pa-risc port, but don't have the time or inclination to
do actual development. I can, however, do testing.
The box is an HP-9000 model 832, HP-UX 9.0, 32 Megs of RAM (yeah, I know
that's rather low), and 3.5 gigs of hard drive space split between 6 HP-IB
disk drives (4 internal, 2 external). A SCSI interface is supposed to
arrive fed-ex today, and I will be adding a CD-ROM and SCSI disks as cash
becomes available.
What I really need to know, though, are two things:
1. What is the process for getting the Linux kernel to boot?
2. What can I do to help with the porting of Linux to the PA-RISC
architecture?
Christopher L McNabb
Senior Technical Specialist
SCT Corporation
work: cmcnabb@sctcorp.com
home: chris@4mcnabb.net
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [parisc-linux] Got a machine, Got a Kernel Image, Got a Ramdisk Image, What's next?
@ 1999-11-16 14:48 Mike Hibler
0 siblings, 0 replies; 3+ messages in thread
From: Mike Hibler @ 1999-11-16 14:48 UTC (permalink / raw)
To: chris, parisc-linux
> From: "Christopher L McNabb" <chris@4mcnabb.net>
> To: <parisc-linux@thepuffingroup.com>
> Date: Tue, 16 Nov 1999 09:23:07 -0500
> Subject: [parisc-linux] Got a machine, Got a Kernel Image, Got a Ramdisk Image, What's next?
>
> I've been using Intel Linux since version 0.99. My company recently retired
> an HP-9000 model 832, which is now sitting here in my house. I would love
> to help out with the pa-risc port, but don't have the time or inclination to
> do actual development. I can, however, do testing.
>
> The box is an HP-9000 model 832, HP-UX 9.0, 32 Megs of RAM (yeah, I know
> that's rather low), and 3.5 gigs of hard drive space split between 6 HP-IB
> disk drives (4 internal, 2 external). A SCSI interface is supposed to
> arrive fed-ex today, and I will be adding a CD-ROM and SCSI disks as cash
> becomes available.
>
> What I really need to know, though, are two things:
> 1. What is the process for getting the Linux kernel to boot?
> 2. What can I do to help with the porting of Linux to the PA-RISC
> architecture?
>
The current linux work is focusing on 1.1 and 2.0 architecture machines with
fairly traditional memory-mapped IO architectures. The 832 is a PA 1.0
machine with a completely different "channel" based IO bus architecture
(NIO).
In a nutshell, it would be a long uphill battle to port anything to it
and for very little gain. Scrap it!
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [parisc-linux] Got a machine, Got a Kernel Image, Got a Ramdisk Image, What's next?
1999-11-16 14:23 [parisc-linux] Got a machine, Got a Kernel Image, Got a Ramdisk Image, What's next? Christopher L McNabb
@ 1999-11-16 19:14 ` Stan Sieler
0 siblings, 0 replies; 3+ messages in thread
From: Stan Sieler @ 1999-11-16 19:14 UTC (permalink / raw)
To: Christopher L McNabb; +Cc: parisc-linux
Re:
> The box is an HP-9000 model 832, HP-UX 9.0, 32 Megs of RAM (yeah, I know
> that's rather low), and 3.5 gigs of hard drive space split between 6 HP-IB
> disk drives (4 internal, 2 external). A SCSI interface is supposed to
> arrive fed-ex today, and I will be adding a CD-ROM and SCSI disks as cash
> becomes available.
I can't remember if the original 8x2 machines could boot from SCSI.
Their immediate predecessors, the 8x5 machines, couldn't (but the
ability was added later via a firmware upgrade).
That aside, 8x2 machines are a slightly older version of PA-RISC
(1.0? 1.1?). The 9000/7xx and most newer 9000/8xx machines are
running newer versions of PA-RISC (1.2 or later). The most
important difference is in floating point instructions.
The PA-RISC kernel *could* be easily compiled for 1.0 architecture...
I doubt that it does much floating point work in the kernel!
Further, it could be compiled with 1.2 scheduling...that still
works on 1.0 machines.
The I/O architecture is HP-PB, like the 8x7 machines, so that
may be okay.
If it turns out that the current port won't work for you, you
have a few choices:
1) wait for it to be done, and modify it for 8x2.
2) use your 832 with HP-UX. You can go to
http://www.software.hp.com/y2kupgrades/
and get HP-UX 10.20 for free.
3) trade it for a machine supported by the current porting
project.
If you opt for (3), you may want to know about the Classic Computer
mailing list ... a worldwide group of computer collectors.
To post a message to it, send to:
classiccmp@u.washington.edu
The 832 is a 30 MHz machine.
--
Stan Sieler sieler@allegro.com
www.allegro.com/sieler/wanted/index.html www.allegro.com/sieler
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~1999-11-16 19:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-11-16 14:23 [parisc-linux] Got a machine, Got a Kernel Image, Got a Ramdisk Image, What's next? Christopher L McNabb
1999-11-16 19:14 ` Stan Sieler
-- strict thread matches above, loose matches on Subject: below --
1999-11-16 14:48 Mike Hibler
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.