From: "Sricharan" <sricharan@codeaurora.org>
To: 'Andy Gross' <andy.gross@linaro.org>, 'Bjorn Andersson' <bjorn@kryo.se>
Cc: devicetree@vger.kernel.org,
'Archit Taneja' <architt@codeaurora.org>,
'Wolfram Sang' <wsa@the-dreams.de>,
'linux-arm-msm' <linux-arm-msm@vger.kernel.org>,
ntelkar@codeaurora.org, 'Kumar Gala' <galak@codeaurora.org>,
linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
"'Ivan T. Ivanov'" <iivanov@mm-sol.com>,
'Andy Gross' <agross@codeaurora.org>,
dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: RE: [PATCH V7 5/6] dts: msm8974: Add blsp2_bam dma node
Date: Mon, 28 Mar 2016 18:29:32 +0530 [thread overview]
Message-ID: <000d01d188f1$b150e660$13f2b320$@codeaurora.org> (raw)
In-Reply-To: <20160326022612.GA3764@hector.attlocal.net>
> On Fri, Mar 25, 2016 at 04:17:30PM -0700, Bjorn Andersson wrote:
> > On Tue, Jan 19, 2016 at 2:02 AM, Sricharan R <sricharan@codeaurora.org>
> wrote:
> > > Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> > > Reviewed-by: Andy Gross <andy.gross@linaro.org>
>
> <snip>
>
> > > + blsp2_dma: dma-controller@f9944000 {
> > > + compatible = "qcom,bam-v1.4.0";
> > > + reg = <0xf9944000 0x19000>;
> > > + interrupts = <GIC_SPI 239
IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&gcc GCC_BLSP2_AHB_CLK>;
> > > + clock-names = "bam_clk";
> > > + #dma-cells = <1>;
> > > + qcom,ee = <0>;
> >
> > Without "qcom,bam_ctrl_remote;" and
> > https://patchwork.kernel.org/patch/8639181/ the Xperia Honami board
> > fails to boot with this patch included.
>
> Ouch. At least one set of pipes must be used by some other processor and
> TZ has locked down that BLSP.
Hmm, this was not the case atleast on the apq8074DB board that I tested
this on.
Regards,
Sricharan
WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 5/6] dts: msm8974: Add blsp2_bam dma node
Date: Mon, 28 Mar 2016 18:29:32 +0530 [thread overview]
Message-ID: <000d01d188f1$b150e660$13f2b320$@codeaurora.org> (raw)
In-Reply-To: <20160326022612.GA3764@hector.attlocal.net>
> On Fri, Mar 25, 2016 at 04:17:30PM -0700, Bjorn Andersson wrote:
> > On Tue, Jan 19, 2016 at 2:02 AM, Sricharan R <sricharan@codeaurora.org>
> wrote:
> > > Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> > > Reviewed-by: Andy Gross <andy.gross@linaro.org>
>
> <snip>
>
> > > + blsp2_dma: dma-controller at f9944000 {
> > > + compatible = "qcom,bam-v1.4.0";
> > > + reg = <0xf9944000 0x19000>;
> > > + interrupts = <GIC_SPI 239
IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&gcc GCC_BLSP2_AHB_CLK>;
> > > + clock-names = "bam_clk";
> > > + #dma-cells = <1>;
> > > + qcom,ee = <0>;
> >
> > Without "qcom,bam_ctrl_remote;" and
> > https://patchwork.kernel.org/patch/8639181/ the Xperia Honami board
> > fails to boot with this patch included.
>
> Ouch. At least one set of pipes must be used by some other processor and
> TZ has locked down that BLSP.
Hmm, this was not the case atleast on the apq8074DB board that I tested
this on.
Regards,
Sricharan
WARNING: multiple messages have this Message-ID (diff)
From: "Sricharan" <sricharan@codeaurora.org>
To: "'Andy Gross'" <andy.gross@linaro.org>,
"'Bjorn Andersson'" <bjorn@kryo.se>
Cc: <devicetree@vger.kernel.org>,
"'Archit Taneja'" <architt@codeaurora.org>,
"'Wolfram Sang'" <wsa@the-dreams.de>,
"'linux-arm-msm'" <linux-arm-msm@vger.kernel.org>,
<ntelkar@codeaurora.org>, "'Kumar Gala'" <galak@codeaurora.org>,
<linux-kernel@vger.kernel.org>, <linux-i2c@vger.kernel.org>,
"'Ivan T. Ivanov'" <iivanov@mm-sol.com>,
"'Andy Gross'" <agross@codeaurora.org>,
<dmaengine@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: RE: [PATCH V7 5/6] dts: msm8974: Add blsp2_bam dma node
Date: Mon, 28 Mar 2016 18:29:32 +0530 [thread overview]
Message-ID: <000d01d188f1$b150e660$13f2b320$@codeaurora.org> (raw)
In-Reply-To: <20160326022612.GA3764@hector.attlocal.net>
> On Fri, Mar 25, 2016 at 04:17:30PM -0700, Bjorn Andersson wrote:
> > On Tue, Jan 19, 2016 at 2:02 AM, Sricharan R <sricharan@codeaurora.org>
> wrote:
> > > Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> > > Reviewed-by: Andy Gross <andy.gross@linaro.org>
>
> <snip>
>
> > > + blsp2_dma: dma-controller@f9944000 {
> > > + compatible = "qcom,bam-v1.4.0";
> > > + reg = <0xf9944000 0x19000>;
> > > + interrupts = <GIC_SPI 239
IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&gcc GCC_BLSP2_AHB_CLK>;
> > > + clock-names = "bam_clk";
> > > + #dma-cells = <1>;
> > > + qcom,ee = <0>;
> >
> > Without "qcom,bam_ctrl_remote;" and
> > https://patchwork.kernel.org/patch/8639181/ the Xperia Honami board
> > fails to boot with this patch included.
>
> Ouch. At least one set of pipes must be used by some other processor and
> TZ has locked down that BLSP.
Hmm, this was not the case atleast on the apq8074DB board that I tested
this on.
Regards,
Sricharan
next prev parent reply other threads:[~2016-03-28 12:59 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-19 10:02 [PATCH V7 0/6] i2c: qup: Add support for v2 tags and bam dma Sricharan R
2016-01-19 10:02 ` Sricharan R
2016-01-19 10:02 ` [PATCH V7 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts Sricharan R
2016-01-19 10:02 ` Sricharan R
2016-01-19 10:02 ` Sricharan R
2016-02-12 18:37 ` Wolfram Sang
2016-02-12 18:37 ` Wolfram Sang
2016-01-19 10:02 ` [PATCH V7 2/6] i2c: qup: Add V2 tags support Sricharan R
2016-01-19 10:02 ` Sricharan R
2016-02-12 18:37 ` Wolfram Sang
2016-02-12 18:37 ` Wolfram Sang
2016-01-19 10:02 ` [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit Sricharan R
2016-01-19 10:02 ` Sricharan R
2016-01-24 11:29 ` Wolfram Sang
2016-01-24 11:29 ` Wolfram Sang
2016-01-28 4:57 ` Sricharan
2016-01-28 4:57 ` Sricharan
2016-01-28 4:57 ` Sricharan
2016-02-04 20:09 ` Wolfram Sang
2016-02-04 20:09 ` Wolfram Sang
2016-02-05 8:00 ` Sricharan
2016-02-05 8:00 ` Sricharan
2016-02-05 8:00 ` Sricharan
2016-02-12 18:38 ` Wolfram Sang
2016-02-12 18:38 ` Wolfram Sang
2016-01-19 10:02 ` [PATCH V7 4/6] i2c: qup: Add bam dma capabilities Sricharan R
2016-01-19 10:02 ` Sricharan R
2016-02-12 18:37 ` Wolfram Sang
2016-02-12 18:37 ` Wolfram Sang
2016-02-12 18:42 ` Wolfram Sang
2016-02-12 18:42 ` Wolfram Sang
2016-02-13 6:58 ` Sricharan
2016-02-13 6:58 ` Sricharan
2016-02-13 6:58 ` Sricharan
2016-02-22 12:24 ` Sricharan
2016-02-22 12:24 ` Sricharan
2016-02-22 12:24 ` Sricharan
2016-02-22 12:32 ` Wolfram Sang
2016-02-22 12:32 ` Wolfram Sang
2016-02-22 13:41 ` Sricharan
2016-02-22 13:41 ` Sricharan
2016-02-22 13:41 ` Sricharan
2016-01-19 10:02 ` [PATCH V7 5/6] dts: msm8974: Add blsp2_bam dma node Sricharan R
2016-01-19 10:02 ` Sricharan R
[not found] ` <1453197766-18976-6-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-03-25 23:17 ` Bjorn Andersson
2016-03-25 23:17 ` Bjorn Andersson
2016-03-25 23:17 ` Bjorn Andersson
2016-03-26 2:26 ` Andy Gross
2016-03-26 2:26 ` Andy Gross
2016-03-28 12:59 ` Sricharan [this message]
2016-03-28 12:59 ` Sricharan
2016-03-28 12:59 ` Sricharan
2016-01-19 10:02 ` [PATCH V7 6/6] dts: msm8974: Add dma channels for blsp2_i2c1 node Sricharan R
2016-01-19 10:02 ` Sricharan R
2016-01-19 10:14 ` [PATCH V7 0/6] i2c: qup: Add support for v2 tags and bam dma Sricharan
2016-01-19 10:14 ` Sricharan
2016-01-19 10:14 ` Sricharan
2016-01-24 11:33 ` Wolfram Sang
2016-01-24 11:33 ` Wolfram Sang
2016-01-28 5:27 ` Sricharan
2016-01-28 5:27 ` Sricharan
2016-01-28 5:27 ` Sricharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000d01d188f1$b150e660$13f2b320$@codeaurora.org' \
--to=sricharan@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=architt@codeaurora.org \
--cc=bjorn@kryo.se \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=iivanov@mm-sol.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ntelkar@codeaurora.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.