From: "Kevin D. Kissell" <kevink@mips.com>
To: "Mark and Janice Juszczec" <juszczec@hotmail.com>,
<linux-mips@linux-mips.org>
Cc: <uhler@mips.com>, <dom@mips.com>, <echristo@redhat.com>
Subject: Re: r3000 instruction set
Date: Mon, 23 Feb 2004 18:21:19 +0100 [thread overview]
Message-ID: <006001c3fa31$74c07fa0$10eca8c0@grendel> (raw)
In-Reply-To: Law10-F123ODt9Cz93M0000b89a@hotmail.com
> Someone suggested posting the message I get. Here it is:
>
> >./kaffe-bin FirstClass
> [kaffe-bin:6] Illgal instruction 674696a at 2abb034, ra=2adbffd0,
> P0_STATUS=0000500
> pid 6: killed (signal 4)
> >Reading command line: Try again
> Kernel panic: Attmpted to kill int!
Let me guess. You are running little-endian. The instruction word
in memory would be 0x6a697406. Do you think it's a coincidence
that 0x6a6974 spells "jit" in ASCII? ;o)
The reported address range looks like that where kaffe builds its
JITted instruciton buffers in MIPS/Linux. And, like I say, JIT is
somewhat broken for MIPS in Kaffe. Which version of the kaffe sources
are you building, and have you tried configuring with --with-engine=intrp
as I suggested?
Regards,
Kevin K.
WARNING: multiple messages have this Message-ID (diff)
From: "Kevin D. Kissell" <kevink@mips.com>
To: Mark and Janice Juszczec <juszczec@hotmail.com>,
linux-mips@linux-mips.org
Cc: uhler@mips.com, dom@mips.com, echristo@redhat.com
Subject: Re: r3000 instruction set
Date: Mon, 23 Feb 2004 18:21:19 +0100 [thread overview]
Message-ID: <006001c3fa31$74c07fa0$10eca8c0@grendel> (raw)
Message-ID: <20040223172119.9eyiXwzPEiCxpg08kIt7y1tpGACb8pc4084E_acpXxI@z> (raw)
In-Reply-To: Law10-F123ODt9Cz93M0000b89a@hotmail.com
> Someone suggested posting the message I get. Here it is:
>
> >./kaffe-bin FirstClass
> [kaffe-bin:6] Illgal instruction 674696a at 2abb034, ra=2adbffd0,
> P0_STATUS=0000500
> pid 6: killed (signal 4)
> >Reading command line: Try again
> Kernel panic: Attmpted to kill int!
Let me guess. You are running little-endian. The instruction word
in memory would be 0x6a697406. Do you think it's a coincidence
that 0x6a6974 spells "jit" in ASCII? ;o)
The reported address range looks like that where kaffe builds its
JITted instruciton buffers in MIPS/Linux. And, like I say, JIT is
somewhat broken for MIPS in Kaffe. Which version of the kaffe sources
are you building, and have you tried configuring with --with-engine=intrp
as I suggested?
Regards,
Kevin K.
next prev parent reply other threads:[~2004-02-23 17:20 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-23 16:56 r3000 instruction set Mark and Janice Juszczec
2004-02-23 17:07 ` Michael Uhler
2004-02-23 17:13 ` Maciej W. Rozycki
2004-02-23 17:21 ` Kevin D. Kissell [this message]
2004-02-23 17:21 ` Kevin D. Kissell
2004-02-23 17:59 ` Dominic Sweetman
-- strict thread matches above, loose matches on Subject: below --
2004-03-01 15:38 Mark and Janice Juszczec
2004-02-23 20:48 Mark and Janice Juszczec
2004-02-23 22:46 ` Kevin D. Kissell
2004-02-23 22:46 ` Kevin D. Kissell
2004-02-22 3:02 Mark and Janice Juszczec
2004-02-22 3:15 ` Michael Uhler
2004-02-22 9:32 ` Kevin D. Kissell
2004-02-22 9:32 ` Kevin D. Kissell
2004-02-22 12:31 ` Dominic Sweetman
2004-02-22 19:13 ` Eric Christopher
2004-02-22 21:52 ` Kevin D. Kissell
2004-02-22 21:52 ` Kevin D. Kissell
2004-02-23 3:03 ` Steven J. Hill
2004-02-23 7:03 ` Kevin D. Kissell
2004-02-23 7:03 ` Kevin D. Kissell
2004-02-23 3:37 ` Eric Christopher
2004-02-23 7:11 ` Kevin D. Kissell
2004-02-23 7:11 ` Kevin D. Kissell
2004-02-23 7:29 ` Eric Christopher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='006001c3fa31$74c07fa0$10eca8c0@grendel' \
--to=kevink@mips.com \
--cc=dom@mips.com \
--cc=echristo@redhat.com \
--cc=juszczec@hotmail.com \
--cc=linux-mips@linux-mips.org \
--cc=uhler@mips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.