From: "Brian & Chamaigne Scamman" <scammanbc@earthlink.net>
To: 'Tejun Heo' <htejun@gmail.com>
Cc: 'Mark Lord' <liml@rtr.ca>, jeff@garzik.org, linux-ide@vger.kernel.org
Subject: RE: [PATCHSET #upstream-fixes] git tree available
Date: Wed, 21 May 2008 07:14:48 -0400 [thread overview]
Message-ID: <00a901c8bb33$e2228b20$6917a8c0@parents> (raw)
In-Reply-To: <4833AC14.5090207@gmail.com>
Tejun Heo wrote:
>Brian & Chamaigne Scamman wrote:
>> One remaining issue is the "failed to IDENTIFY (I/O error, err
mask=0xll)"
>> message. If the PMP, bridges and drives are powered up before I insert
the
>> eSATA cable in to the controller, I don't receive the message. The
message
>> appears when only when I have the eSATA cable attached to the controller
and
>> then simultaneously power on the PMP and drives. In the attached dmesg
log,
>> the drive is eventually recognized; however there have been a couple of
>> times when the drives aren't recognized. An eSATA cable remove/re-insert
>> fixes the problem.
>
>Hmm... can you please post the failing log?
In my previous post, there are two cases where the drive wasn't initially
recognized, but did respond after a PMP link reset (ata3.00 and ata3.03).
I'll post a log today were one of the drives is never recognized (doesn't
happen that often)
-Brian
next prev parent reply other threads:[~2008-05-21 11:14 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-18 16:15 [PATCHSET #upstream-fixes] libata: fix a bunch of PMP related problems Tejun Heo
2008-05-18 16:15 ` [PATCH 01/10] libata: fix sata_link_hardreset() @online out parameter handling Tejun Heo
2008-05-19 21:53 ` Jeff Garzik
2008-05-18 16:15 ` [PATCH 02/10] libata: reorganize ata_eh_reset() no reset method path Tejun Heo
2008-05-18 16:15 ` [PATCH 03/10] libata: move reset freeze/thaw handling into ata_eh_reset() Tejun Heo
2008-05-18 16:15 ` [PATCH 04/10] libata: kill hotplug related race condition Tejun Heo
2008-05-18 16:15 ` [PATCH 05/10] libata: ignore recovered PHY errors Tejun Heo
2008-05-19 21:50 ` Jeff Garzik
2008-05-18 16:15 ` [PATCH 06/10] libata: increase PMP register access timeout to 3s Tejun Heo
2008-05-18 16:15 ` [PATCH 07/10] libata: make sure PMP notification is turned off during recovery Tejun Heo
2008-05-18 16:15 ` [PATCH 08/10] libata: don't schedule LPM action seperately during probing Tejun Heo
2008-05-18 16:15 ` [PATCH 09/10] sata_sil24: don't use NCQ if marvell 4140 PMP is attached Tejun Heo
2008-05-18 21:14 ` Mark Lord
2008-05-18 16:15 ` [PATCH 10/10] libata: ignore SIMG4726 config pseudo device Tejun Heo
2008-05-18 16:29 ` [PATCHSET #upstream-fixes] git tree available Tejun Heo
2008-05-20 1:35 ` Brian & Chamaigne Scamman
2008-05-20 2:58 ` Mark Lord
2008-05-20 4:28 ` Tejun Heo
2008-05-20 4:43 ` Tejun Heo
2008-05-21 1:32 ` Brian & Chamaigne Scamman
2008-05-21 4:59 ` Tejun Heo
2008-05-21 11:14 ` Brian & Chamaigne Scamman [this message]
2008-05-21 19:42 ` Brian & Chamaigne Scamman
2008-05-22 0:40 ` Tejun Heo
2008-05-23 0:49 ` Brian & Chamaigne Scamman
2008-05-23 1:04 ` Tejun Heo
2008-05-29 3:06 ` Tejun Heo
2008-05-29 3:11 ` Brian & Chamaigne Scamman
2008-05-20 12:08 ` Brian & Chamaigne Scamman
2008-05-20 14:50 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00a901c8bb33$e2228b20$6917a8c0@parents' \
--to=scammanbc@earthlink.net \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.