All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org
Cc: liml@rtr.ca, Tejun Heo <htejun@gmail.com>
Subject: [PATCH 07/10] libata: make sure PMP notification is turned off during recovery
Date: Mon, 19 May 2008 01:15:11 +0900	[thread overview]
Message-ID: <12111273193711-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <12111273141039-git-send-email-htejun@gmail.com>

PMP notification during reset can make some controllers fail reset
processing and needs to be turned off during resets.  PMP attach and
full-revalidation path did this via sata_pmp_configure() but the quick
revalidation wasn't.  Move the notification disable code right above
fan-out port recovery so that it's always turned off.

This fixes obscure reset failures.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-pmp.c |   36 ++++++++++++++++++++----------------
 1 files changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 04a486a..0f9386d 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -257,19 +257,6 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info)
 		goto fail;
 	}
 
-	/* turn off notification till fan-out ports are reset and configured */
-	if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
-		gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
-
-		err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_FEAT_EN,
-					  gscr[SATA_PMP_GSCR_FEAT_EN]);
-		if (err_mask) {
-			rc = -EIO;
-			reason = "failed to write GSCR_FEAT_EN";
-			goto fail;
-		}
-	}
-
 	if (print_info) {
 		ata_dev_printk(dev, KERN_INFO, "Port Multiplier %s, "
 			       "0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
@@ -860,6 +847,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 	struct ata_link *pmp_link = &ap->link;
 	struct ata_device *pmp_dev = pmp_link->device;
 	struct ata_eh_context *pmp_ehc = &pmp_link->eh_context;
+	u32 *gscr = pmp_dev->gscr;
 	struct ata_link *link;
 	struct ata_device *dev;
 	unsigned int err_mask;
@@ -897,6 +885,22 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 	if (rc)
 		goto pmp_fail;
 
+	/* PHY event notification can disturb reset and other recovery
+	 * operations.  Turn it off.
+	 */
+	if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
+		gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
+
+		err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
+					  gscr[SATA_PMP_GSCR_FEAT_EN]);
+		if (err_mask) {
+			ata_link_printk(pmp_link, KERN_WARNING,
+				"failed to disable NOTIFY (err_mask=0x%x)\n",
+				err_mask);
+			goto pmp_fail;
+		}
+	}
+
 	/* handle disabled links */
 	rc = sata_pmp_eh_handle_disabled_links(ap);
 	if (rc)
@@ -919,10 +923,10 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 
 	/* enable notification */
 	if (pmp_dev->flags & ATA_DFLAG_AN) {
-		pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
+		gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
 
-		err_mask = sata_pmp_write(pmp_dev->link, SATA_PMP_GSCR_FEAT_EN,
-					  pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN]);
+		err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
+					  gscr[SATA_PMP_GSCR_FEAT_EN]);
 		if (err_mask) {
 			ata_dev_printk(pmp_dev, KERN_ERR, "failed to write "
 				       "PMP_FEAT_EN (Emask=0x%x)\n", err_mask);
-- 
1.5.2.4


  parent reply	other threads:[~2008-05-18 16:15 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-18 16:15 [PATCHSET #upstream-fixes] libata: fix a bunch of PMP related problems Tejun Heo
2008-05-18 16:15 ` [PATCH 01/10] libata: fix sata_link_hardreset() @online out parameter handling Tejun Heo
2008-05-19 21:53   ` Jeff Garzik
2008-05-18 16:15 ` [PATCH 02/10] libata: reorganize ata_eh_reset() no reset method path Tejun Heo
2008-05-18 16:15 ` [PATCH 03/10] libata: move reset freeze/thaw handling into ata_eh_reset() Tejun Heo
2008-05-18 16:15 ` [PATCH 04/10] libata: kill hotplug related race condition Tejun Heo
2008-05-18 16:15 ` [PATCH 05/10] libata: ignore recovered PHY errors Tejun Heo
2008-05-19 21:50   ` Jeff Garzik
2008-05-18 16:15 ` [PATCH 06/10] libata: increase PMP register access timeout to 3s Tejun Heo
2008-05-18 16:15 ` Tejun Heo [this message]
2008-05-18 16:15 ` [PATCH 08/10] libata: don't schedule LPM action seperately during probing Tejun Heo
2008-05-18 16:15 ` [PATCH 09/10] sata_sil24: don't use NCQ if marvell 4140 PMP is attached Tejun Heo
2008-05-18 21:14   ` Mark Lord
2008-05-18 16:15 ` [PATCH 10/10] libata: ignore SIMG4726 config pseudo device Tejun Heo
2008-05-18 16:29 ` [PATCHSET #upstream-fixes] git tree available Tejun Heo
2008-05-20  1:35   ` Brian & Chamaigne Scamman
2008-05-20  2:58     ` Mark Lord
2008-05-20  4:28       ` Tejun Heo
2008-05-20  4:43         ` Tejun Heo
2008-05-21  1:32           ` Brian & Chamaigne Scamman
2008-05-21  4:59             ` Tejun Heo
2008-05-21 11:14               ` Brian & Chamaigne Scamman
2008-05-21 19:42               ` Brian & Chamaigne Scamman
2008-05-22  0:40                 ` Tejun Heo
2008-05-23  0:49                   ` Brian & Chamaigne Scamman
2008-05-23  1:04                     ` Tejun Heo
2008-05-29  3:06                       ` Tejun Heo
2008-05-29  3:11                         ` Brian & Chamaigne Scamman
2008-05-20 12:08         ` Brian & Chamaigne Scamman
2008-05-20 14:50           ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=12111273193711-git-send-email-htejun@gmail.com \
    --to=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.