From: "Jack Wang" <jack_wang@usish.com>
To: 'Drunkard Zhang' <gongfan193@gmail.com>,
"'James E.J. Bottomley'" <JBottomley@parallels.com>,
'Xi Wang' <xi.wang@gmail.com>,
'Xiangliang Yu' <yuxiangl@marvell.com>,
linux-scsi@vger.kernel.org,
'linux-kernel' <linux-kernel@vger.kernel.org>,
djbw@fb.com
Subject: RE: mvsas regression since 3.5
Date: Mon, 24 Dec 2012 09:50:13 +0800 [thread overview]
Message-ID: <00cd01cde179$049bbc60$0dd33520$@com> (raw)
In-Reply-To: <CAJiejCRCXgCw957to0fWhQPS69doacY9DOaQMpfyxM4bm3igQw@mail.gmail.com>
[Jack Wang]
Do you see bug51881, which may relate to what you see
https://bugzilla.kernel.org/show_bug.cgi?id=51881
btw: also correct Dan's mail address.
I'm using Asus PIKE 6480 SAS card, whose chipset is "RAID bus
controller: Marvell Technology Group Ltd. MV64460/64461/64462 System Controller, Revision B", with latest stable branch 3.7.1 only 1 of 8 ports works, to get others works I got to pull & plug back. While with
3.5.7 it's all good, so it must be a regression.
Here's corresponding boot time dmesg of 3.7.1 with debug compiled:
[ 5.967302] udevd[1212]: starting version 171
[ 6.568908] mvsas 0000:04:00.0: mvsas: driver version 0.8.16
[ 6.569431] mvsas 0000:04:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 10.980331] drivers/scsi/mvsas/mv_sas.c 1174:phy 0 attach dev info is 0
[ 10.980334] drivers/scsi/mvsas/mv_sas.c 1176:phy 0 attach sas addr is 0
[ 11.180909] drivers/scsi/mvsas/mv_sas.c 1174:phy 1 attach dev info is 0
[ 11.180912] drivers/scsi/mvsas/mv_sas.c 1176:phy 1 attach sas addr is 1
[ 11.381501] drivers/scsi/mvsas/mv_sas.c 1174:phy 2 attach dev info is 0
[ 11.381503] drivers/scsi/mvsas/mv_sas.c 1176:phy 2 attach sas addr is 2
[ 11.582085] drivers/scsi/mvsas/mv_sas.c 1174:phy 3 attach dev info is 0
[ 11.582088] drivers/scsi/mvsas/mv_sas.c 1176:phy 3 attach sas addr is 3
[ 11.782673] drivers/scsi/mvsas/mv_sas.c 1174:phy 4 attach dev info is 0
[ 11.782676] drivers/scsi/mvsas/mv_sas.c 1176:phy 4 attach sas addr is 4
[ 11.983262] drivers/scsi/mvsas/mv_sas.c 1174:phy 5 attach dev info is 800
[ 11.983265] drivers/scsi/mvsas/mv_sas.c 1176:phy 5 attach sas addr is 5
[ 12.183856] drivers/scsi/mvsas/mv_sas.c 1174:phy 6 attach dev info is 4
[ 12.183858] drivers/scsi/mvsas/mv_sas.c 1176:phy 6 attach sas addr is 6
[ 12.384438] drivers/scsi/mvsas/mv_sas.c 1174:phy 7 attach dev info is 0
[ 12.384441] drivers/scsi/mvsas/mv_sas.c 1176:phy 7 attach sas addr is 7
[ 12.384447] scsi6 : mvsas
[ 12.385479] drivers/scsi/mvsas/mv_sas.c 277:phy 0 byte dmaded.
[ 12.385482] drivers/scsi/mvsas/mv_sas.c 277:phy 1 byte dmaded.
[ 12.385488] drivers/scsi/mvsas/mv_sas.c 277:phy 2 byte dmaded.
[ 12.385491] drivers/scsi/mvsas/mv_sas.c 277:phy 3 byte dmaded.
[ 12.385494] drivers/scsi/mvsas/mv_sas.c 277:phy 4 byte dmaded.
[ 12.385497] drivers/scsi/mvsas/mv_sas.c 277:phy 5 byte dmaded.
[ 12.385500] drivers/scsi/mvsas/mv_sas.c 277:phy 6 byte dmaded.
[ 12.385503] drivers/scsi/mvsas/mv_sas.c 277:phy 7 byte dmaded.
[ 12.385614] sas: phy-6:0 added to port-6:0, phy_mask:0x1 ( 0)
[ 12.385667] sas: phy-6:1 added to port-6:1, phy_mask:0x2 ( 100000000000000)
[ 12.385716] sas: phy-6:2 added to port-6:2, phy_mask:0x4 ( 200000000000000)
[ 12.385759] sas: phy-6:3 added to port-6:3, phy_mask:0x8 ( 300000000000000)
[ 12.385801] sas: phy-6:4 added to port-6:4, phy_mask:0x10 ( 400000000000000)
[ 12.385851] sas: phy-6:5 added to port-6:5, phy_mask:0x20 ( 500000000000000)
[ 12.385895] sas: phy-6:6 added to port-6:6, phy_mask:0x40 ( 600000000000000)
[ 12.385942] sas: phy-6:7 added to port-6:7, phy_mask:0x80 ( 700000000000000)
[ 12.385967] sas: DOING DISCOVERY on port 0, pid:847
[ 12.385974] sas: DONE DISCOVERY on port 0, pid:847, result:0
[ 12.385986] sas: DOING DISCOVERY on port 1, pid:847
[ 12.385991] sas: DONE DISCOVERY on port 1, pid:847, result:0
[ 12.386003] sas: DOING DISCOVERY on port 2, pid:847
[ 12.386009] sas: DONE DISCOVERY on port 2, pid:847, result:0
[ 12.386020] sas: DOING DISCOVERY on port 3, pid:847
[ 12.386029] sas: DONE DISCOVERY on port 3, pid:847, result:0
[ 12.386041] sas: DOING DISCOVERY on port 4, pid:847
[ 12.386048] sas: DONE DISCOVERY on port 4, pid:847, result:0
[ 12.386060] sas: DOING DISCOVERY on port 5, pid:847
[ 12.386066] sas: DONE DISCOVERY on port 5, pid:847, result:0
[ 12.386077] sas: DOING DISCOVERY on port 6, pid:847
[ 12.386083] sas: DONE DISCOVERY on port 6, pid:847, result:0
[ 12.386095] sas: DOING DISCOVERY on port 7, pid:847
[ 12.386101] sas: DONE DISCOVERY on port 7, pid:847, result:0
[ 12.386188] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 12.386281] sas: ata7: end_device-6:0: dev error handler
[ 12.537987] ata7.00: ATA-8: ST33000650NS, 0004, max UDMA/133
[ 12.537992] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 12.538227] drivers/scsi/mvsas/mv_sas.c 1857:port 0 slot 0 rx_desc
20000 has error info0000000081000000.
[ 12.538256] ata7.00: failed to get Identify Device Data, Emask 0x1
[ 12.539467] drivers/scsi/mvsas/mv_sas.c 1857:port 0 slot 0 rx_desc
20000 has error info0000000081000000.
[ 12.539496] ata7.00: failed to get Identify Device Data, Emask 0x1
[ 12.539504] ata7.00: configured for UDMA/133
[ 12.539611] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 12.550707] scsi 6:0:0:0: Direct-Access ATA ST33000650NS
0004 PQ: 0 ANSI: 5
[ 12.550800] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 12.550893] sas: ata7: end_device-6:0: dev error handler
[ 12.550983] sas: ata8: end_device-6:1: dev error handler
[ 12.702637] drivers/scsi/mvsas/mv_sas.c 1857:port 1 slot 0 rx_desc
20000 has error info0000000081000000.
[ 12.702667] ata8.00: both IDENTIFYs aborted, assuming NODEV
[ 12.702766] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 12.714341] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 12.714418] sas: ata7: end_device-6:0: dev error handler
[ 12.714435] sas: ata8: end_device-6:1: dev error handler
[ 12.714440] sas: ata9: end_device-6:2: dev error handler
[ 12.865290] drivers/scsi/mvsas/mv_sas.c 1857:port 2 slot 0 rx_desc
20000 has error info0000000081000000.
[ 12.865319] ata9.00: both IDENTIFYs aborted, assuming NODEV
[ 12.865423] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 12.876995] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 12.877094] sas: ata7: end_device-6:0: dev error handler
[ 12.877111] sas: ata8: end_device-6:1: dev error handler
[ 12.877118] sas: ata9: end_device-6:2: dev error handler
[ 12.877123] sas: ata10: end_device-6:3: dev error handler
[ 13.027975] drivers/scsi/mvsas/mv_sas.c 1857:port 3 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.028004] ata10.00: both IDENTIFYs aborted, assuming NODEV
[ 13.028098] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.039653] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 13.039731] sas: ata7: end_device-6:0: dev error handler
[ 13.039747] sas: ata8: end_device-6:1: dev error handler
[ 13.039754] sas: ata9: end_device-6:2: dev error handler
[ 13.039760] sas: ata10: end_device-6:3: dev error handler
[ 13.039765] sas: ata11: end_device-6:4: dev error handler
[ 13.195528] drivers/scsi/mvsas/mv_sas.c 1857:port 4 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.195557] ata11.00: both IDENTIFYs aborted, assuming NODEV
[ 13.195664] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.207297] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 13.207392] sas: ata7: end_device-6:0: dev error handler
[ 13.207409] sas: ata8: end_device-6:1: dev error handler
[ 13.207417] sas: ata9: end_device-6:2: dev error handler
[ 13.207422] sas: ata10: end_device-6:3: dev error handler
[ 13.207427] sas: ata11: end_device-6:4: dev error handler
[ 13.207432] sas: ata12: end_device-6:5: dev error handler
[ 13.360919] drivers/scsi/mvsas/mv_sas.c 1857:port 5 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.360949] ata12.00: both IDENTIFYs aborted, assuming NODEV
[ 13.361059] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.371980] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 13.372076] sas: ata7: end_device-6:0: dev error handler
[ 13.372092] sas: ata8: end_device-6:1: dev error handler
[ 13.372099] sas: ata9: end_device-6:2: dev error handler
[ 13.372105] sas: ata10: end_device-6:3: dev error handler
[ 13.372110] sas: ata11: end_device-6:4: dev error handler
[ 13.372115] sas: ata12: end_device-6:5: dev error handler
[ 13.372119] sas: ata13: end_device-6:6: dev error handler
[ 13.525785] drivers/scsi/mvsas/mv_sas.c 1857:port 6 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.525814] ata13.00: both IDENTIFYs aborted, assuming NODEV
[ 13.525919] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.537549] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 13.537606] sas: ata7: end_device-6:0: dev error handler
[ 13.537623] sas: ata8: end_device-6:1: dev error handler
[ 13.537630] sas: ata9: end_device-6:2: dev error handler
[ 13.537635] sas: ata10: end_device-6:3: dev error handler
[ 13.537640] sas: ata11: end_device-6:4: dev error handler
[ 13.537645] sas: ata12: end_device-6:5: dev error handler
[ 13.537650] sas: ata13: end_device-6:6: dev error handler
[ 13.537655] sas: ata14: end_device-6:7: dev error handler
[ 13.692779] drivers/scsi/mvsas/mv_sas.c 1857:port 7 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.692808] ata14.00: both IDENTIFYs aborted, assuming NODEV
[ 13.692917] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.704396] sd 6:0:0:0: [sde] 5860533168 512-byte logical blocks:
(3.00 TB/2.72 TiB)
[ 13.704461] sd 6:0:0:0: [sde] Write Protect is off
[ 13.704466] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 13.704492] sd 6:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 13.704589] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 13.742800] sde: sde1
[ 13.743201] sd 6:0:0:0: [sde] Attached SCSI disk
[ 14.848140] bio: create slab <bio-1> at 1
WARNING: multiple messages have this Message-ID (diff)
From: "Jack Wang" <jack_wang@usish.com>
To: "'Drunkard Zhang'" <gongfan193@gmail.com>,
"'James E.J. Bottomley'" <JBottomley@parallels.com>,
"'Xi Wang'" <xi.wang@gmail.com>,
"'Xiangliang Yu'" <yuxiangl@marvell.com>,
<linux-scsi@vger.kernel.org>,
"'linux-kernel'" <linux-kernel@vger.kernel.org>, <djbw@fb.com>
Subject: RE: mvsas regression since 3.5
Date: Mon, 24 Dec 2012 09:50:13 +0800 [thread overview]
Message-ID: <00cd01cde179$049bbc60$0dd33520$@com> (raw)
In-Reply-To: <CAJiejCRCXgCw957to0fWhQPS69doacY9DOaQMpfyxM4bm3igQw@mail.gmail.com>
[Jack Wang]
Do you see bug51881, which may relate to what you see
https://bugzilla.kernel.org/show_bug.cgi?id=51881
btw: also correct Dan's mail address.
I'm using Asus PIKE 6480 SAS card, whose chipset is "RAID bus
controller: Marvell Technology Group Ltd. MV64460/64461/64462 System Controller, Revision B", with latest stable branch 3.7.1 only 1 of 8 ports works, to get others works I got to pull & plug back. While with
3.5.7 it's all good, so it must be a regression.
Here's corresponding boot time dmesg of 3.7.1 with debug compiled:
[ 5.967302] udevd[1212]: starting version 171
[ 6.568908] mvsas 0000:04:00.0: mvsas: driver version 0.8.16
[ 6.569431] mvsas 0000:04:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 10.980331] drivers/scsi/mvsas/mv_sas.c 1174:phy 0 attach dev info is 0
[ 10.980334] drivers/scsi/mvsas/mv_sas.c 1176:phy 0 attach sas addr is 0
[ 11.180909] drivers/scsi/mvsas/mv_sas.c 1174:phy 1 attach dev info is 0
[ 11.180912] drivers/scsi/mvsas/mv_sas.c 1176:phy 1 attach sas addr is 1
[ 11.381501] drivers/scsi/mvsas/mv_sas.c 1174:phy 2 attach dev info is 0
[ 11.381503] drivers/scsi/mvsas/mv_sas.c 1176:phy 2 attach sas addr is 2
[ 11.582085] drivers/scsi/mvsas/mv_sas.c 1174:phy 3 attach dev info is 0
[ 11.582088] drivers/scsi/mvsas/mv_sas.c 1176:phy 3 attach sas addr is 3
[ 11.782673] drivers/scsi/mvsas/mv_sas.c 1174:phy 4 attach dev info is 0
[ 11.782676] drivers/scsi/mvsas/mv_sas.c 1176:phy 4 attach sas addr is 4
[ 11.983262] drivers/scsi/mvsas/mv_sas.c 1174:phy 5 attach dev info is 800
[ 11.983265] drivers/scsi/mvsas/mv_sas.c 1176:phy 5 attach sas addr is 5
[ 12.183856] drivers/scsi/mvsas/mv_sas.c 1174:phy 6 attach dev info is 4
[ 12.183858] drivers/scsi/mvsas/mv_sas.c 1176:phy 6 attach sas addr is 6
[ 12.384438] drivers/scsi/mvsas/mv_sas.c 1174:phy 7 attach dev info is 0
[ 12.384441] drivers/scsi/mvsas/mv_sas.c 1176:phy 7 attach sas addr is 7
[ 12.384447] scsi6 : mvsas
[ 12.385479] drivers/scsi/mvsas/mv_sas.c 277:phy 0 byte dmaded.
[ 12.385482] drivers/scsi/mvsas/mv_sas.c 277:phy 1 byte dmaded.
[ 12.385488] drivers/scsi/mvsas/mv_sas.c 277:phy 2 byte dmaded.
[ 12.385491] drivers/scsi/mvsas/mv_sas.c 277:phy 3 byte dmaded.
[ 12.385494] drivers/scsi/mvsas/mv_sas.c 277:phy 4 byte dmaded.
[ 12.385497] drivers/scsi/mvsas/mv_sas.c 277:phy 5 byte dmaded.
[ 12.385500] drivers/scsi/mvsas/mv_sas.c 277:phy 6 byte dmaded.
[ 12.385503] drivers/scsi/mvsas/mv_sas.c 277:phy 7 byte dmaded.
[ 12.385614] sas: phy-6:0 added to port-6:0, phy_mask:0x1 ( 0)
[ 12.385667] sas: phy-6:1 added to port-6:1, phy_mask:0x2 ( 100000000000000)
[ 12.385716] sas: phy-6:2 added to port-6:2, phy_mask:0x4 ( 200000000000000)
[ 12.385759] sas: phy-6:3 added to port-6:3, phy_mask:0x8 ( 300000000000000)
[ 12.385801] sas: phy-6:4 added to port-6:4, phy_mask:0x10 ( 400000000000000)
[ 12.385851] sas: phy-6:5 added to port-6:5, phy_mask:0x20 ( 500000000000000)
[ 12.385895] sas: phy-6:6 added to port-6:6, phy_mask:0x40 ( 600000000000000)
[ 12.385942] sas: phy-6:7 added to port-6:7, phy_mask:0x80 ( 700000000000000)
[ 12.385967] sas: DOING DISCOVERY on port 0, pid:847
[ 12.385974] sas: DONE DISCOVERY on port 0, pid:847, result:0
[ 12.385986] sas: DOING DISCOVERY on port 1, pid:847
[ 12.385991] sas: DONE DISCOVERY on port 1, pid:847, result:0
[ 12.386003] sas: DOING DISCOVERY on port 2, pid:847
[ 12.386009] sas: DONE DISCOVERY on port 2, pid:847, result:0
[ 12.386020] sas: DOING DISCOVERY on port 3, pid:847
[ 12.386029] sas: DONE DISCOVERY on port 3, pid:847, result:0
[ 12.386041] sas: DOING DISCOVERY on port 4, pid:847
[ 12.386048] sas: DONE DISCOVERY on port 4, pid:847, result:0
[ 12.386060] sas: DOING DISCOVERY on port 5, pid:847
[ 12.386066] sas: DONE DISCOVERY on port 5, pid:847, result:0
[ 12.386077] sas: DOING DISCOVERY on port 6, pid:847
[ 12.386083] sas: DONE DISCOVERY on port 6, pid:847, result:0
[ 12.386095] sas: DOING DISCOVERY on port 7, pid:847
[ 12.386101] sas: DONE DISCOVERY on port 7, pid:847, result:0
[ 12.386188] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 12.386281] sas: ata7: end_device-6:0: dev error handler
[ 12.537987] ata7.00: ATA-8: ST33000650NS, 0004, max UDMA/133
[ 12.537992] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 12.538227] drivers/scsi/mvsas/mv_sas.c 1857:port 0 slot 0 rx_desc
20000 has error info0000000081000000.
[ 12.538256] ata7.00: failed to get Identify Device Data, Emask 0x1
[ 12.539467] drivers/scsi/mvsas/mv_sas.c 1857:port 0 slot 0 rx_desc
20000 has error info0000000081000000.
[ 12.539496] ata7.00: failed to get Identify Device Data, Emask 0x1
[ 12.539504] ata7.00: configured for UDMA/133
[ 12.539611] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 12.550707] scsi 6:0:0:0: Direct-Access ATA ST33000650NS
0004 PQ: 0 ANSI: 5
[ 12.550800] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 12.550893] sas: ata7: end_device-6:0: dev error handler
[ 12.550983] sas: ata8: end_device-6:1: dev error handler
[ 12.702637] drivers/scsi/mvsas/mv_sas.c 1857:port 1 slot 0 rx_desc
20000 has error info0000000081000000.
[ 12.702667] ata8.00: both IDENTIFYs aborted, assuming NODEV
[ 12.702766] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 12.714341] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 12.714418] sas: ata7: end_device-6:0: dev error handler
[ 12.714435] sas: ata8: end_device-6:1: dev error handler
[ 12.714440] sas: ata9: end_device-6:2: dev error handler
[ 12.865290] drivers/scsi/mvsas/mv_sas.c 1857:port 2 slot 0 rx_desc
20000 has error info0000000081000000.
[ 12.865319] ata9.00: both IDENTIFYs aborted, assuming NODEV
[ 12.865423] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 12.876995] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 12.877094] sas: ata7: end_device-6:0: dev error handler
[ 12.877111] sas: ata8: end_device-6:1: dev error handler
[ 12.877118] sas: ata9: end_device-6:2: dev error handler
[ 12.877123] sas: ata10: end_device-6:3: dev error handler
[ 13.027975] drivers/scsi/mvsas/mv_sas.c 1857:port 3 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.028004] ata10.00: both IDENTIFYs aborted, assuming NODEV
[ 13.028098] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.039653] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 13.039731] sas: ata7: end_device-6:0: dev error handler
[ 13.039747] sas: ata8: end_device-6:1: dev error handler
[ 13.039754] sas: ata9: end_device-6:2: dev error handler
[ 13.039760] sas: ata10: end_device-6:3: dev error handler
[ 13.039765] sas: ata11: end_device-6:4: dev error handler
[ 13.195528] drivers/scsi/mvsas/mv_sas.c 1857:port 4 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.195557] ata11.00: both IDENTIFYs aborted, assuming NODEV
[ 13.195664] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.207297] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 13.207392] sas: ata7: end_device-6:0: dev error handler
[ 13.207409] sas: ata8: end_device-6:1: dev error handler
[ 13.207417] sas: ata9: end_device-6:2: dev error handler
[ 13.207422] sas: ata10: end_device-6:3: dev error handler
[ 13.207427] sas: ata11: end_device-6:4: dev error handler
[ 13.207432] sas: ata12: end_device-6:5: dev error handler
[ 13.360919] drivers/scsi/mvsas/mv_sas.c 1857:port 5 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.360949] ata12.00: both IDENTIFYs aborted, assuming NODEV
[ 13.361059] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.371980] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 13.372076] sas: ata7: end_device-6:0: dev error handler
[ 13.372092] sas: ata8: end_device-6:1: dev error handler
[ 13.372099] sas: ata9: end_device-6:2: dev error handler
[ 13.372105] sas: ata10: end_device-6:3: dev error handler
[ 13.372110] sas: ata11: end_device-6:4: dev error handler
[ 13.372115] sas: ata12: end_device-6:5: dev error handler
[ 13.372119] sas: ata13: end_device-6:6: dev error handler
[ 13.525785] drivers/scsi/mvsas/mv_sas.c 1857:port 6 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.525814] ata13.00: both IDENTIFYs aborted, assuming NODEV
[ 13.525919] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.537549] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 13.537606] sas: ata7: end_device-6:0: dev error handler
[ 13.537623] sas: ata8: end_device-6:1: dev error handler
[ 13.537630] sas: ata9: end_device-6:2: dev error handler
[ 13.537635] sas: ata10: end_device-6:3: dev error handler
[ 13.537640] sas: ata11: end_device-6:4: dev error handler
[ 13.537645] sas: ata12: end_device-6:5: dev error handler
[ 13.537650] sas: ata13: end_device-6:6: dev error handler
[ 13.537655] sas: ata14: end_device-6:7: dev error handler
[ 13.692779] drivers/scsi/mvsas/mv_sas.c 1857:port 7 slot 0 rx_desc
20000 has error info0000000081000000.
[ 13.692808] ata14.00: both IDENTIFYs aborted, assuming NODEV
[ 13.692917] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 13.704396] sd 6:0:0:0: [sde] 5860533168 512-byte logical blocks:
(3.00 TB/2.72 TiB)
[ 13.704461] sd 6:0:0:0: [sde] Write Protect is off
[ 13.704466] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 13.704492] sd 6:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 13.704589] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 13.742800] sde: sde1
[ 13.743201] sd 6:0:0:0: [sde] Attached SCSI disk
[ 14.848140] bio: create slab <bio-1> at 1
next prev parent reply other threads:[~2012-12-24 1:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-22 15:33 mvsas regression since 3.5 Drunkard Zhang
2012-12-23 7:17 ` Xi Wang
2012-12-23 8:26 ` Drunkard Zhang
2012-12-23 8:44 ` James Bottomley
2012-12-24 1:50 ` Jack Wang [this message]
2012-12-24 1:50 ` Jack Wang
2012-12-24 4:32 ` Drunkard Zhang
2012-12-24 4:32 ` Drunkard Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00cd01cde179$049bbc60$0dd33520$@com' \
--to=jack_wang@usish.com \
--cc=JBottomley@parallels.com \
--cc=djbw@fb.com \
--cc=gongfan193@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=xi.wang@gmail.com \
--cc=yuxiangl@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.