* [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
@ 2015-04-01 18:16 ` Kukjin Kim
0 siblings, 0 replies; 11+ messages in thread
From: Kukjin Kim @ 2015-04-01 18:16 UTC (permalink / raw)
To: arm, Arnd Bergmann, 'Olof Johansson', Kevin Hilman
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt-64
for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:
arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
02:13:43 +0900)
----------------------------------------------------------------
Samsung arm64 DT updates for v4.1
- add new SoC for arm64 based exynos5433 SoC
: exynos5433 - Octa cores for big.LITTLE architecture
(Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
: added thermal-zones, TMU sensor and I2S dt nodes
: added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
: added pinctrl, HS-I2C, Serial and basic system dt nodes
----------------------------------------------------------------
Chanwoo Choi (6):
arm64: dts: Add dts files for 64-bit Exynos5433 SoC
arm64: dts: Add SPI/PDMA dt node for exynos5433
arm64: dts: Add PMU dt node for exynos5433
arm64: dts: Add RTC and ADC dt node for exynos5433
arm64: dts: Add TMU sensor dt node for exynos5433
arm64: dts: Add thermal-zones dt node for exynos5433
Inha Song (2):
arm64: dts: Add ADMA dt node for exynos5433
arm64: dts: Add I2S dt node for exynos5433
Jaehoon Chung (1):
arm64: dts: Add MSHC dt node for exynos5433
.../devicetree/bindings/arm/samsung/pmu.txt | 1 +
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
.../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
+++++++++++++++++++++
5 files changed, 1883 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
create mode 100644
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
^ permalink raw reply [flat|nested] 11+ messages in thread
* [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
@ 2015-04-01 18:16 ` Kukjin Kim
0 siblings, 0 replies; 11+ messages in thread
From: Kukjin Kim @ 2015-04-01 18:16 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt-64
for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:
arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
02:13:43 +0900)
----------------------------------------------------------------
Samsung arm64 DT updates for v4.1
- add new SoC for arm64 based exynos5433 SoC
: exynos5433 - Octa cores for big.LITTLE architecture
(Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
: added thermal-zones, TMU sensor and I2S dt nodes
: added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
: added pinctrl, HS-I2C, Serial and basic system dt nodes
----------------------------------------------------------------
Chanwoo Choi (6):
arm64: dts: Add dts files for 64-bit Exynos5433 SoC
arm64: dts: Add SPI/PDMA dt node for exynos5433
arm64: dts: Add PMU dt node for exynos5433
arm64: dts: Add RTC and ADC dt node for exynos5433
arm64: dts: Add TMU sensor dt node for exynos5433
arm64: dts: Add thermal-zones dt node for exynos5433
Inha Song (2):
arm64: dts: Add ADMA dt node for exynos5433
arm64: dts: Add I2S dt node for exynos5433
Jaehoon Chung (1):
arm64: dts: Add MSHC dt node for exynos5433
.../devicetree/bindings/arm/samsung/pmu.txt | 1 +
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
.../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
+++++++++++++++++++++
5 files changed, 1883 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
create mode 100644
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
2015-04-01 18:16 ` Kukjin Kim
@ 2015-04-03 22:02 ` Olof Johansson
-1 siblings, 0 replies; 11+ messages in thread
From: Olof Johansson @ 2015-04-03 22:02 UTC (permalink / raw)
To: Kukjin Kim
Cc: arm, Arnd Bergmann, Kevin Hilman,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
> The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
>
> Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> tags/samsung-dt-64
>
> for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:
>
> arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
> 02:13:43 +0900)
>
> ----------------------------------------------------------------
> Samsung arm64 DT updates for v4.1
>
> - add new SoC for arm64 based exynos5433 SoC
> : exynos5433 - Octa cores for big.LITTLE architecture
> (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
>
> : added thermal-zones, TMU sensor and I2S dt nodes
> : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
> : added pinctrl, HS-I2C, Serial and basic system dt nodes
>
> ----------------------------------------------------------------
> Chanwoo Choi (6):
> arm64: dts: Add dts files for 64-bit Exynos5433 SoC
> arm64: dts: Add SPI/PDMA dt node for exynos5433
> arm64: dts: Add PMU dt node for exynos5433
> arm64: dts: Add RTC and ADC dt node for exynos5433
> arm64: dts: Add TMU sensor dt node for exynos5433
> arm64: dts: Add thermal-zones dt node for exynos5433
>
> Inha Song (2):
> arm64: dts: Add ADMA dt node for exynos5433
> arm64: dts: Add I2S dt node for exynos5433
>
> Jaehoon Chung (1):
> arm64: dts: Add MSHC dt node for exynos5433
>
> .../devicetree/bindings/arm/samsung/pmu.txt | 1 +
> arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
> .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
> arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
> +++++++++++++++++++++
> 5 files changed, 1883 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> create mode 100644
> arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
How do you even build these dts files? How did you test this branch before you
sent it to us?
Not merged.
-Olof
^ permalink raw reply [flat|nested] 11+ messages in thread
* [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
@ 2015-04-03 22:02 ` Olof Johansson
0 siblings, 0 replies; 11+ messages in thread
From: Olof Johansson @ 2015-04-03 22:02 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
> The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
>
> Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> tags/samsung-dt-64
>
> for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:
>
> arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
> 02:13:43 +0900)
>
> ----------------------------------------------------------------
> Samsung arm64 DT updates for v4.1
>
> - add new SoC for arm64 based exynos5433 SoC
> : exynos5433 - Octa cores for big.LITTLE architecture
> (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
>
> : added thermal-zones, TMU sensor and I2S dt nodes
> : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
> : added pinctrl, HS-I2C, Serial and basic system dt nodes
>
> ----------------------------------------------------------------
> Chanwoo Choi (6):
> arm64: dts: Add dts files for 64-bit Exynos5433 SoC
> arm64: dts: Add SPI/PDMA dt node for exynos5433
> arm64: dts: Add PMU dt node for exynos5433
> arm64: dts: Add RTC and ADC dt node for exynos5433
> arm64: dts: Add TMU sensor dt node for exynos5433
> arm64: dts: Add thermal-zones dt node for exynos5433
>
> Inha Song (2):
> arm64: dts: Add ADMA dt node for exynos5433
> arm64: dts: Add I2S dt node for exynos5433
>
> Jaehoon Chung (1):
> arm64: dts: Add MSHC dt node for exynos5433
>
> .../devicetree/bindings/arm/samsung/pmu.txt | 1 +
> arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
> .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
> arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
> +++++++++++++++++++++
> 5 files changed, 1883 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> create mode 100644
> arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
How do you even build these dts files? How did you test this branch before you
sent it to us?
Not merged.
-Olof
^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
2015-04-03 22:02 ` Olof Johansson
@ 2015-04-04 6:45 ` Kukjin Kim
-1 siblings, 0 replies; 11+ messages in thread
From: Kukjin Kim @ 2015-04-04 6:45 UTC (permalink / raw)
To: 'Olof Johansson', 'Kukjin Kim', Chanwoo Choi,
Mike Turquette
Cc: 'Kevin Hilman', linux-samsung-soc, arm, linux-arm-kernel,
'Arnd Bergmann'
Olof Johansson wrote:
>
> On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
> > The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
> >
> > Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
> >
> > are available in the git repository at:
> >
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> > tags/samsung-dt-64
> >
> > for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:
> >
> > arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
> > 02:13:43 +0900)
> >
> > ----------------------------------------------------------------
> > Samsung arm64 DT updates for v4.1
> >
> > - add new SoC for arm64 based exynos5433 SoC
> > : exynos5433 - Octa cores for big.LITTLE architecture
> > (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
> >
> > : added thermal-zones, TMU sensor and I2S dt nodes
> > : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
> > : added pinctrl, HS-I2C, Serial and basic system dt nodes
> >
> > ----------------------------------------------------------------
> > Chanwoo Choi (6):
> > arm64: dts: Add dts files for 64-bit Exynos5433 SoC
> > arm64: dts: Add SPI/PDMA dt node for exynos5433
> > arm64: dts: Add PMU dt node for exynos5433
> > arm64: dts: Add RTC and ADC dt node for exynos5433
> > arm64: dts: Add TMU sensor dt node for exynos5433
> > arm64: dts: Add thermal-zones dt node for exynos5433
> >
> > Inha Song (2):
> > arm64: dts: Add ADMA dt node for exynos5433
> > arm64: dts: Add I2S dt node for exynos5433
> >
> > Jaehoon Chung (1):
> > arm64: dts: Add MSHC dt node for exynos5433
> >
> > .../devicetree/bindings/arm/samsung/pmu.txt | 1 +
> > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
> > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
> > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
> > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
> > +++++++++++++++++++++
> > 5 files changed, 1883 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> > create mode 100644
> > arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
>
+ Chanwoo, Mike
Hi Olof,
Thanks for your taking other pull-requests :-)
> How do you even build these dts files? How did you test this branch before
> you sent it to us?
>
Yeah, your pointing out is exact. In my side, I've tested with 1) creating
exynos5433-smdk5433 board dt file and 2) adding ARCH_EXYNOS5433 config in
arch/arm64 and 3) including 5433 related clk tree, actually in linux-next.
Sorry for missing the explaining in my pull-request.
For 1), I've talked to Chanwoo about that and he is not ready to post its
board dt now and I want actual board dt for mass product would be better
in mainline. Maybe need some time...
For 2), we can add regarding updates for exynos-64 Kconfig/Makefile including
Arnd's suggestion to collapse all exynos-64 config entries in arm64/Kconfig
_later_, because current the exynos5433 dt has a dependency with 1) and clk
tree to support exynos5433 SoC.
For 3), same as For 2). Additionally as you know tipically arm-soc and clk
trees could have dependencies when new SoC supporting is added.
> Not merged.
>
Yeah, I agreed why you didn't. In this case, how do you think about adding
support new SoC then adding board dt including above changes later?
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 11+ messages in thread
* [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
@ 2015-04-04 6:45 ` Kukjin Kim
0 siblings, 0 replies; 11+ messages in thread
From: Kukjin Kim @ 2015-04-04 6:45 UTC (permalink / raw)
To: linux-arm-kernel
Olof Johansson wrote:
>
> On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
> > The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
> >
> > Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
> >
> > are available in the git repository at:
> >
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> > tags/samsung-dt-64
> >
> > for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:
> >
> > arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
> > 02:13:43 +0900)
> >
> > ----------------------------------------------------------------
> > Samsung arm64 DT updates for v4.1
> >
> > - add new SoC for arm64 based exynos5433 SoC
> > : exynos5433 - Octa cores for big.LITTLE architecture
> > (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
> >
> > : added thermal-zones, TMU sensor and I2S dt nodes
> > : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
> > : added pinctrl, HS-I2C, Serial and basic system dt nodes
> >
> > ----------------------------------------------------------------
> > Chanwoo Choi (6):
> > arm64: dts: Add dts files for 64-bit Exynos5433 SoC
> > arm64: dts: Add SPI/PDMA dt node for exynos5433
> > arm64: dts: Add PMU dt node for exynos5433
> > arm64: dts: Add RTC and ADC dt node for exynos5433
> > arm64: dts: Add TMU sensor dt node for exynos5433
> > arm64: dts: Add thermal-zones dt node for exynos5433
> >
> > Inha Song (2):
> > arm64: dts: Add ADMA dt node for exynos5433
> > arm64: dts: Add I2S dt node for exynos5433
> >
> > Jaehoon Chung (1):
> > arm64: dts: Add MSHC dt node for exynos5433
> >
> > .../devicetree/bindings/arm/samsung/pmu.txt | 1 +
> > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
> > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
> > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
> > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
> > +++++++++++++++++++++
> > 5 files changed, 1883 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> > create mode 100644
> > arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
>
+ Chanwoo, Mike
Hi Olof,
Thanks for your taking other pull-requests :-)
> How do you even build these dts files? How did you test this branch before
> you sent it to us?
>
Yeah, your pointing out is exact. In my side, I've tested with 1) creating
exynos5433-smdk5433 board dt file and 2) adding ARCH_EXYNOS5433 config in
arch/arm64 and 3) including 5433 related clk tree, actually in linux-next.
Sorry for missing the explaining in my pull-request.
For 1), I've talked to Chanwoo about that and he is not ready to post its
board dt now and I want actual board dt for mass product would be better
in mainline. Maybe need some time...
For 2), we can add regarding updates for exynos-64 Kconfig/Makefile including
Arnd's suggestion to collapse all exynos-64 config entries in arm64/Kconfig
_later_, because current the exynos5433 dt has a dependency with 1) and clk
tree to support exynos5433 SoC.
For 3), same as For 2). Additionally as you know tipically arm-soc and clk
trees could have dependencies when new SoC supporting is added.
> Not merged.
>
Yeah, I agreed why you didn't. In this case, how do you think about adding
support new SoC then adding board dt including above changes later?
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
@ 2015-05-12 18:39 Kukjin Kim
2015-05-14 13:56 ` Chanwoo Choi
0 siblings, 1 reply; 11+ messages in thread
From: Kukjin Kim @ 2015-05-12 18:39 UTC (permalink / raw)
To: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, 'Chanwoo Choi'
Cc: Arnd Bergmann, 'Olof Johansson'
> Olof Johansson wrote:
> >
> > On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
> > > The following changes since commit
c517d838eb7d07bbe9507871fab3931deccff539:
> > >
> > > Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
> > >
> > > are available in the git repository at:
> > >
> > >
> > > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> > > tags/samsung-dt-64
> > >
> > > for you to fetch changes up to
423c716151e254e42650ad78b30c2cd782c6f654:
> > >
> > > arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
> > > 02:13:43 +0900)
> > >
> > > ----------------------------------------------------------------
> > > Samsung arm64 DT updates for v4.1
> > >
> > > - add new SoC for arm64 based exynos5433 SoC
> > > : exynos5433 - Octa cores for big.LITTLE architecture
> > > (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
> > >
> > > : added thermal-zones, TMU sensor and I2S dt nodes
> > > : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
> > > : added pinctrl, HS-I2C, Serial and basic system dt nodes
> > >
> > > ----------------------------------------------------------------
> > > Chanwoo Choi (6):
> > > arm64: dts: Add dts files for 64-bit Exynos5433 SoC
> > > arm64: dts: Add SPI/PDMA dt node for exynos5433
> > > arm64: dts: Add PMU dt node for exynos5433
> > > arm64: dts: Add RTC and ADC dt node for exynos5433
> > > arm64: dts: Add TMU sensor dt node for exynos5433
> > > arm64: dts: Add thermal-zones dt node for exynos5433
> > >
> > > Inha Song (2):
> > > arm64: dts: Add ADMA dt node for exynos5433
> > > arm64: dts: Add I2S dt node for exynos5433
> > >
> > > Jaehoon Chung (1):
> > > arm64: dts: Add MSHC dt node for exynos5433
> > >
> > > .../devicetree/bindings/arm/samsung/pmu.txt | 1 +
> > > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698
+++++++++++++++
> > > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
> > > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
> > > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
> > > +++++++++++++++++++++
> > > 5 files changed, 1883 insertions(+)
> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> > > create mode 100644
> > > arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
> >
> + Chanwoo, Mike
>
> Hi Olof,
>
> Thanks for your taking other pull-requests :-)
>
> > How do you even build these dts files? How did you test this branch
before
> > you sent it to us?
> >
> Yeah, your pointing out is exact. In my side, I've tested with 1) creating
> exynos5433-smdk5433 board dt file and 2) adding ARCH_EXYNOS5433 config in
> arch/arm64 and 3) including 5433 related clk tree, actually in linux-next.
> Sorry for missing the explaining in my pull-request.
>
> For 1), I've talked to Chanwoo about that and he is not ready to post its
> board dt now and I want actual board dt for mass product would be better
> in mainline. Maybe need some time...
>
> For 2), we can add regarding updates for exynos-64 Kconfig/Makefile
including
> Arnd's suggestion to collapse all exynos-64 config entries in
arm64/Kconfig
> _later_, because current the exynos5433 dt has a dependency with 1)
and clk
> tree to support exynos5433 SoC.
>
> For 3), same as For 2). Additionally as you know tipically arm-soc and clk
> trees could have dependencies when new SoC supporting is added.
>
> > Not merged.
> >
> Yeah, I agreed why you didn't. In this case, how do you think about adding
> support new SoC then adding board dt including above changes later?
>
> Thanks,
> Kukjin
Hi Chanwoo,
As you know, the arm64-exynos5433 couldn't be sent to upstream during
previous merge window because it cannot be built without other stuff
such as board DT file. I think, you need to post its regarding board DT
file, I could test the exynos5433 series in my side with smdk5433 dt
file though. Maybe as you know, I have no plan to upstream the smdk5433
DT file because it will not be used outside of Samsung S.LSI.
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
2015-05-12 18:39 Kukjin Kim
@ 2015-05-14 13:56 ` Chanwoo Choi
0 siblings, 0 replies; 11+ messages in thread
From: Chanwoo Choi @ 2015-05-14 13:56 UTC (permalink / raw)
To: Kukjin Kim
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, Arnd Bergmann, Olof Johansson
Hi Kukjin,
On Wed, May 13, 2015 at 3:39 AM, Kukjin Kim <kgene@kernel.org> wrote:
>> Olof Johansson wrote:
>> >
>> > On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
>> > > The following changes since commit
> c517d838eb7d07bbe9507871fab3931deccff539:
>> > >
>> > > Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
>> > >
>> > > are available in the git repository at:
>> > >
>> > >
>> > > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
>> > > tags/samsung-dt-64
>> > >
>> > > for you to fetch changes up to
> 423c716151e254e42650ad78b30c2cd782c6f654:
>> > >
>> > > arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
>> > > 02:13:43 +0900)
>> > >
>> > > ----------------------------------------------------------------
>> > > Samsung arm64 DT updates for v4.1
>> > >
>> > > - add new SoC for arm64 based exynos5433 SoC
>> > > : exynos5433 - Octa cores for big.LITTLE architecture
>> > > (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
>> > >
>> > > : added thermal-zones, TMU sensor and I2S dt nodes
>> > > : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
>> > > : added pinctrl, HS-I2C, Serial and basic system dt nodes
>> > >
>> > > ----------------------------------------------------------------
>> > > Chanwoo Choi (6):
>> > > arm64: dts: Add dts files for 64-bit Exynos5433 SoC
>> > > arm64: dts: Add SPI/PDMA dt node for exynos5433
>> > > arm64: dts: Add PMU dt node for exynos5433
>> > > arm64: dts: Add RTC and ADC dt node for exynos5433
>> > > arm64: dts: Add TMU sensor dt node for exynos5433
>> > > arm64: dts: Add thermal-zones dt node for exynos5433
>> > >
>> > > Inha Song (2):
>> > > arm64: dts: Add ADMA dt node for exynos5433
>> > > arm64: dts: Add I2S dt node for exynos5433
>> > >
>> > > Jaehoon Chung (1):
>> > > arm64: dts: Add MSHC dt node for exynos5433
>> > >
>> > > .../devicetree/bindings/arm/samsung/pmu.txt | 1 +
>> > > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698
> +++++++++++++++
>> > > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
>> > > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
>> > > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
>> > > +++++++++++++++++++++
>> > > 5 files changed, 1883 insertions(+)
>> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
>> > > create mode 100644
>> > > arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
>> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
>> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> >
>> + Chanwoo, Mike
>>
>> Hi Olof,
>>
>> Thanks for your taking other pull-requests :-)
>>
>> > How do you even build these dts files? How did you test this branch
> before
>> > you sent it to us?
>> >
>> Yeah, your pointing out is exact. In my side, I've tested with 1) creating
>> exynos5433-smdk5433 board dt file and 2) adding ARCH_EXYNOS5433 config in
>> arch/arm64 and 3) including 5433 related clk tree, actually in linux-next.
>> Sorry for missing the explaining in my pull-request.
>>
>> For 1), I've talked to Chanwoo about that and he is not ready to post its
>> board dt now and I want actual board dt for mass product would be better
>> in mainline. Maybe need some time...
>>
>> For 2), we can add regarding updates for exynos-64 Kconfig/Makefile
> including
>> Arnd's suggestion to collapse all exynos-64 config entries in
> arm64/Kconfig
>> _later_, because current the exynos5433 dt has a dependency with 1)
> and clk
>> tree to support exynos5433 SoC.
>>
>> For 3), same as For 2). Additionally as you know tipically arm-soc and clk
>> trees could have dependencies when new SoC supporting is added.
>>
>> > Not merged.
>> >
>> Yeah, I agreed why you didn't. In this case, how do you think about adding
>> support new SoC then adding board dt including above changes later?
>>
>> Thanks,
>> Kukjin
>
> Hi Chanwoo,
>
> As you know, the arm64-exynos5433 couldn't be sent to upstream during
> previous merge window because it cannot be built without other stuff
> such as board DT file. I think, you need to post its regarding board DT
> file, I could test the exynos5433 series in my side with smdk5433 dt
> file though. Maybe as you know, I have no plan to upstream the smdk5433
> DT file because it will not be used outside of Samsung S.LSI.
Thanks for your test about Exynos5433 patch-set.
But, I cannot send the DTS file for Exynos5433 right now.
On the next, I'll send the Exynos5433's patchset and board dts file.
Best Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 11+ messages in thread
* [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
@ 2015-05-14 13:56 ` Chanwoo Choi
0 siblings, 0 replies; 11+ messages in thread
From: Chanwoo Choi @ 2015-05-14 13:56 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kukjin,
On Wed, May 13, 2015 at 3:39 AM, Kukjin Kim <kgene@kernel.org> wrote:
>> Olof Johansson wrote:
>> >
>> > On Thu, Apr 02, 2015 at 03:16:55AM +0900, Kukjin Kim wrote:
>> > > The following changes since commit
> c517d838eb7d07bbe9507871fab3931deccff539:
>> > >
>> > > Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
>> > >
>> > > are available in the git repository at:
>> > >
>> > >
>> > > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
>> > > tags/samsung-dt-64
>> > >
>> > > for you to fetch changes up to
> 423c716151e254e42650ad78b30c2cd782c6f654:
>> > >
>> > > arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
>> > > 02:13:43 +0900)
>> > >
>> > > ----------------------------------------------------------------
>> > > Samsung arm64 DT updates for v4.1
>> > >
>> > > - add new SoC for arm64 based exynos5433 SoC
>> > > : exynos5433 - Octa cores for big.LITTLE architecture
>> > > (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)
>> > >
>> > > : added thermal-zones, TMU sensor and I2S dt nodes
>> > > : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes
>> > > : added pinctrl, HS-I2C, Serial and basic system dt nodes
>> > >
>> > > ----------------------------------------------------------------
>> > > Chanwoo Choi (6):
>> > > arm64: dts: Add dts files for 64-bit Exynos5433 SoC
>> > > arm64: dts: Add SPI/PDMA dt node for exynos5433
>> > > arm64: dts: Add PMU dt node for exynos5433
>> > > arm64: dts: Add RTC and ADC dt node for exynos5433
>> > > arm64: dts: Add TMU sensor dt node for exynos5433
>> > > arm64: dts: Add thermal-zones dt node for exynos5433
>> > >
>> > > Inha Song (2):
>> > > arm64: dts: Add ADMA dt node for exynos5433
>> > > arm64: dts: Add I2S dt node for exynos5433
>> > >
>> > > Jaehoon Chung (1):
>> > > arm64: dts: Add MSHC dt node for exynos5433
>> > >
>> > > .../devicetree/bindings/arm/samsung/pmu.txt | 1 +
>> > > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698
> +++++++++++++++
>> > > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
>> > > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++
>> > > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931
>> > > +++++++++++++++++++++
>> > > 5 files changed, 1883 insertions(+)
>> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
>> > > create mode 100644
>> > > arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
>> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
>> > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> >
>> + Chanwoo, Mike
>>
>> Hi Olof,
>>
>> Thanks for your taking other pull-requests :-)
>>
>> > How do you even build these dts files? How did you test this branch
> before
>> > you sent it to us?
>> >
>> Yeah, your pointing out is exact. In my side, I've tested with 1) creating
>> exynos5433-smdk5433 board dt file and 2) adding ARCH_EXYNOS5433 config in
>> arch/arm64 and 3) including 5433 related clk tree, actually in linux-next.
>> Sorry for missing the explaining in my pull-request.
>>
>> For 1), I've talked to Chanwoo about that and he is not ready to post its
>> board dt now and I want actual board dt for mass product would be better
>> in mainline. Maybe need some time...
>>
>> For 2), we can add regarding updates for exynos-64 Kconfig/Makefile
> including
>> Arnd's suggestion to collapse all exynos-64 config entries in
> arm64/Kconfig
>> _later_, because current the exynos5433 dt has a dependency with 1)
> and clk
>> tree to support exynos5433 SoC.
>>
>> For 3), same as For 2). Additionally as you know tipically arm-soc and clk
>> trees could have dependencies when new SoC supporting is added.
>>
>> > Not merged.
>> >
>> Yeah, I agreed why you didn't. In this case, how do you think about adding
>> support new SoC then adding board dt including above changes later?
>>
>> Thanks,
>> Kukjin
>
> Hi Chanwoo,
>
> As you know, the arm64-exynos5433 couldn't be sent to upstream during
> previous merge window because it cannot be built without other stuff
> such as board DT file. I think, you need to post its regarding board DT
> file, I could test the exynos5433 series in my side with smdk5433 dt
> file though. Maybe as you know, I have no plan to upstream the smdk5433
> DT file because it will not be used outside of Samsung S.LSI.
Thanks for your test about Exynos5433 patch-set.
But, I cannot send the DTS file for Exynos5433 right now.
On the next, I'll send the Exynos5433's patchset and board dts file.
Best Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
2015-05-14 13:56 ` Chanwoo Choi
@ 2015-05-16 3:39 ` Kukjin Kim
-1 siblings, 0 replies; 11+ messages in thread
From: Kukjin Kim @ 2015-05-16 3:39 UTC (permalink / raw)
To: cw00.choi
Cc: Chanwoo Choi, Kukjin Kim, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, Arnd Bergmann, Olof Johansson
On 05/14/15 22:56, Chanwoo Choi wrote:
> Hi Kukjin,
[...]
>> As you know, the arm64-exynos5433 couldn't be sent to upstream during
>> previous merge window because it cannot be built without other stuff
>> such as board DT file. I think, you need to post its regarding board DT
>> file, I could test the exynos5433 series in my side with smdk5433 dt
>> file though. Maybe as you know, I have no plan to upstream the smdk5433
>> DT file because it will not be used outside of Samsung S.LSI.
>
> Thanks for your test about Exynos5433 patch-set.
> But, I cannot send the DTS file for Exynos5433 right now.
> On the next, I'll send the Exynos5433's patchset and board dts file.
>
OK, I see. I think, maybe you can make a patch for board DT file based
on v4.2-next/dt64-samsung branch in samsung tree.
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 11+ messages in thread
* [GIT PULL 4/5] Samsung arm64 DT updates for v4.1
@ 2015-05-16 3:39 ` Kukjin Kim
0 siblings, 0 replies; 11+ messages in thread
From: Kukjin Kim @ 2015-05-16 3:39 UTC (permalink / raw)
To: linux-arm-kernel
On 05/14/15 22:56, Chanwoo Choi wrote:
> Hi Kukjin,
[...]
>> As you know, the arm64-exynos5433 couldn't be sent to upstream during
>> previous merge window because it cannot be built without other stuff
>> such as board DT file. I think, you need to post its regarding board DT
>> file, I could test the exynos5433 series in my side with smdk5433 dt
>> file though. Maybe as you know, I have no plan to upstream the smdk5433
>> DT file because it will not be used outside of Samsung S.LSI.
>
> Thanks for your test about Exynos5433 patch-set.
> But, I cannot send the DTS file for Exynos5433 right now.
> On the next, I'll send the Exynos5433's patchset and board dts file.
>
OK, I see. I think, maybe you can make a patch for board DT file based
on v4.2-next/dt64-samsung branch in samsung tree.
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2015-05-16 3:39 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-04-01 18:16 [GIT PULL 4/5] Samsung arm64 DT updates for v4.1 Kukjin Kim
2015-04-01 18:16 ` Kukjin Kim
2015-04-03 22:02 ` Olof Johansson
2015-04-03 22:02 ` Olof Johansson
2015-04-04 6:45 ` Kukjin Kim
2015-04-04 6:45 ` Kukjin Kim
-- strict thread matches above, loose matches on Subject: below --
2015-05-12 18:39 Kukjin Kim
2015-05-14 13:56 ` Chanwoo Choi
2015-05-14 13:56 ` Chanwoo Choi
2015-05-16 3:39 ` Kukjin Kim
2015-05-16 3:39 ` Kukjin Kim
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.