[U-Boot-Users] RM9200 and at49bv642d

[U-Boot-Users] RM9200 and at49bv642d

[Jonathan Dumaresq]

Hi all,

 

I'm new to u-boot and I want to use it on my new custom design RM9200 board.
This is the first time we design a board based to an arm9 cpu. 

 

I would like to know if this setup is already done or I should start
customizing u-boot to get this work ?

 

My configuration is:

 

2 x SDRAM MT48LC16M16A2

1 x Flash AT49bv642D

 

I'm not 100% sure, but I think we based our desing on the AT91RM9200EK board
for the memory interface. SO I would like to start with something that is
the nearest of what I need. 

 

I see some U-BOOT source based on the 1.2.0 but I'm not sure from what to
start. 

 

If someone can point me to the right direction ?

 

Regards

 

Jonathan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080117/1c538bc5/attachment.htm 

[U-Boot-Users] RM9200 and at49bv642d

[Peter Pearse]

________________________________

	From: u-boot-users-bounces at lists.sourceforge.net
[mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Jonathan
Dumaresq
	Sent: 17 January 2008 15:29
	To: u-boot-users at lists.sourceforge.net
	Subject: [U-Boot-Users] RM9200 and at49bv642d
	
	

	Hi all,


		If someone can point me to the right direction ?



http://www.denx.de/wiki/bin/view/DULG/Manual

esp

http://www.denx.de/wiki/view/DULG/UBootVersions


Then read the README file


Please dont post HTML on this list

Regards

Peter