From: "voncken" <cedric.voncken@acksys.fr>
To: 'Michal Kazior' <michal.kazior@tieto.com>
Cc: 'linux-wireless' <linux-wireless@vger.kernel.org>,
ath10k@lists.infradead.org
Subject: RE: ath10k firmware crash
Date: Mon, 13 Oct 2014 14:06:51 +0200 [thread overview]
Message-ID: <025801cfe6de$2d4c7f70$87e57e50$@acksys.fr> (raw)
In-Reply-To: <CA+BoTQkaKXNfprRwGrQq6rKOZWvANNRrcmgU-iVdw1bONTA--w@mail.gmail.com>
> >
> > Have you a benchmark reference with ATH10K ? at this time we can send
> around 700 Mbit/s, is it the maximum or we can expected better ?
>
> If this is OTA then this is pretty good. If this is cabled RF w/ attentuator
> it should be possible to get ~900mbps of UDP traffic with multiple streams on
> iperf. At least that's what I was getting on 10.1 firmware (on both AP and
> STA) last time I checked.
>
> Getting more than 700mbps OTA requires AP and STA antenna alignment voodoo.
>
I did some tests with a linksys WRT1900AC and I have ~950 mbps OTA easily.
>
> Michał
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: "voncken" <cedric.voncken@acksys.fr>
To: "'Michal Kazior'" <michal.kazior@tieto.com>
Cc: <ath10k@lists.infradead.org>,
"'linux-wireless'" <linux-wireless@vger.kernel.org>
Subject: RE: ath10k firmware crash
Date: Mon, 13 Oct 2014 14:06:51 +0200 [thread overview]
Message-ID: <025801cfe6de$2d4c7f70$87e57e50$@acksys.fr> (raw)
In-Reply-To: <CA+BoTQkaKXNfprRwGrQq6rKOZWvANNRrcmgU-iVdw1bONTA--w@mail.gmail.com>
> >
> > Have you a benchmark reference with ATH10K ? at this time we can send
> around 700 Mbit/s, is it the maximum or we can expected better ?
>
> If this is OTA then this is pretty good. If this is cabled RF w/ attentuator
> it should be possible to get ~900mbps of UDP traffic with multiple streams on
> iperf. At least that's what I was getting on 10.1 firmware (on both AP and
> STA) last time I checked.
>
> Getting more than 700mbps OTA requires AP and STA antenna alignment voodoo.
>
I did some tests with a linksys WRT1900AC and I have ~950 mbps OTA easily.
>
> Michał
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-10-13 13:14 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-10 14:46 ath10k firmware crash Cedric VONCKEN
2014-10-10 14:46 ` Cedric VONCKEN
2014-10-13 5:46 ` Michal Kazior
2014-10-13 5:46 ` Michal Kazior
2014-10-13 7:35 ` voncken
2014-10-13 7:35 ` voncken
2014-10-13 7:54 ` Michal Kazior
2014-10-13 7:54 ` Michal Kazior
2014-10-13 9:20 ` voncken
2014-10-13 9:20 ` voncken
2014-10-13 9:25 ` Michal Kazior
2014-10-13 9:25 ` Michal Kazior
2014-10-13 12:00 ` voncken
2014-10-13 12:00 ` voncken
2014-10-13 14:06 ` voncken
2014-10-13 14:06 ` voncken
2014-10-13 9:23 ` voncken
2014-10-13 9:23 ` voncken
2014-10-13 9:30 ` Michal Kazior
2014-10-13 9:30 ` Michal Kazior
2014-10-13 12:06 ` voncken [this message]
2014-10-13 12:06 ` voncken
2014-10-15 12:13 ` Bartosz Markowski
2014-10-15 12:13 ` Bartosz Markowski
2014-10-15 13:05 ` voncken
2014-10-15 13:05 ` voncken
-- strict thread matches above, loose matches on Subject: below --
2025-01-02 20:19 Ath10k " Jamie
2025-01-09 13:08 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='025801cfe6de$2d4c7f70$87e57e50$@acksys.fr' \
--to=cedric.voncken@acksys.fr \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=michal.kazior@tieto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.