All of lore.kernel.org
 help / color / mirror / Atom feed
From: swise@opengridcomputing.com (Steve Wise)
Subject: [PATCH 1/4] IB/core: add support for draining Shared receive queues
Date: Wed, 17 Jan 2018 09:35:07 -0600	[thread overview]
Message-ID: <02bd01d38fa8$c09a9430$41cfbc90$@opengridcomputing.com> (raw)
In-Reply-To: <1516197178-26493-2-git-send-email-maxg@mellanox.com>

> 
> To avoid theoretical leakage for QPs assocoated with SRQ,
> according to IB spec (section 10.3.1):
> 
> "Note, for QPs that are associated with an SRQ, the Consumer should take
> the QP through the Error State before invoking a Destroy QP or a Modify
> QP to the Reset State. The Consumer may invoke the Destroy QP without
> first performing a Modify QP to the Error State and waiting for the
Affiliated
> Asynchronous Last WQE Reached Event. However, if the Consumer
> does not wait for the Affiliated Asynchronous Last WQE Reached Event,
> then WQE and Data Segment leakage may occur. Therefore, it is good
> programming practice to tear down a QP that is associated with an SRQ
> by using the following process:
>  - Put the QP in the Error State;
>  - wait for the Affiliated Asynchronous Last WQE Reached Event;
>  - either:
>    - drain the CQ by invoking the Poll CQ verb and either wait for CQ
>      to be empty or the number of Poll CQ operations has exceeded
>      CQ capacity size; or
>    - post another WR that completes on the same CQ and wait for this
>      WR to return as a WC;
>  - and then invoke a Destroy QP or Reset QP."
> 
> Signed-off-by: Max Gurtovoy <maxg at mellanox.com>
> ---
>  drivers/infiniband/core/verbs.c | 69
> ++++++++++++++++++++++++++++++++++++++++-
>  include/rdma/ib_verbs.h         |  8 +++++
>  2 files changed, 76 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/infiniband/core/verbs.c
b/drivers/infiniband/core/verbs.c
> index 7868727..7604450 100644
> --- a/drivers/infiniband/core/verbs.c
> +++ b/drivers/infiniband/core/verbs.c
> @@ -886,8 +886,10 @@ struct ib_qp *ib_create_qp(struct ib_pd *pd,
>  		if (qp_init_attr->recv_cq)
>  			atomic_inc(&qp_init_attr->recv_cq->usecnt);
>  		qp->srq = qp_init_attr->srq;
> -		if (qp->srq)
> +		if (qp->srq) {
>  			atomic_inc(&qp_init_attr->srq->usecnt);
> +			init_completion(&qp->srq_completion);
> +		}
>  	}
> 
>  	qp->pd	    = pd;
> @@ -1405,6 +1407,22 @@ int ib_get_eth_speed(struct ib_device *dev, u8
> port_num, u8 *speed, u8 *width)
>  }
>  EXPORT_SYMBOL(ib_get_eth_speed);
> 
> +int ib_notify_qp(struct ib_qp *qp, enum ib_event_type event)
> +{
> +	int ret = 0;
> +
> +	switch (event) {
> +	case IB_EVENT_QP_LAST_WQE_REACHED:
> +		complete(&qp->srq_completion);
> +		break;
> +	default:
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(ib_notify_qp);
> +
>  int ib_modify_qp(struct ib_qp *qp,
>  		 struct ib_qp_attr *qp_attr,
>  		 int qp_attr_mask)
> @@ -2213,6 +2231,53 @@ static void __ib_drain_rq(struct ib_qp *qp)
>  		wait_for_completion(&rdrain.done);
>  }
> 
> +/*
> + * __ib_drain_srq() - Block until all Last WQE Reached event arrives, or
> + *                    timeout expires (best effort).
> + * @qp:               queue pair associated with SRQ to drain
> + *
> + * In order to avoid WQE and data segment leakage, one should destroy
> + * QP associated after performing the following:
> + *  - moving QP to err state
> + *  - wait for the Affiliated Asynchronous Last WQE Reached Event
> + *  - drain the CQ
> + */
> +static void __ib_drain_srq(struct ib_qp *qp)
> +{
> +	struct ib_qp_attr attr = { .qp_state = IB_QPS_ERR };
> +	struct ib_cq *cq;
> +	int ret;
> +
> +	if (!qp->srq) {
> +		WARN_ONCE(1, "QP 0x%p is not associated with SRQ\n", qp);
> +		return;
> +	}
> +
> +	ret = ib_modify_qp(qp, &attr, IB_QP_STATE);
> +	if (ret) {
> +		WARN_ONCE(ret, "failed to drain shared recv queue: %d\n",
> ret);
> +		return;
> +	}
> +
> +	if (ib_srq_has_cq(qp->srq->srq_type)) {
> +		cq = qp->srq->ext.cq;
> +	} else if (qp->recv_cq) {
> +		cq = qp->recv_cq;
> +	} else {
> +		WARN_ONCE(1, "QP 0x%p has no CQ associated with SRQ\n",
> qp);
> +		return;
> +	}
> +
> +	/*
> +         * ULP should invoke ib_notify_qp on IB_EVENT_QP_LAST_WQE_REACHED
> +         * arrival, otherwise timeout will expire and leakage may occur.
> +         * Use long timeout, for the buggy ULPs/HCAs that don't notify
the
> +         * QP nor raising IB_EVENT_QP_LAST_WQE_REACHED event.
> +         */
> +	if (wait_for_completion_timeout(&qp->srq_completion, 10 * HZ) > 0)
> +		ib_process_cq_direct(cq, -1);
> +}
> +

Perhaps a WARN_ONCE is warranted? 


>  /**
>   * ib_drain_sq() - Block until all SQ CQEs have been consumed by the
>   *		   application.
> @@ -2289,5 +2354,7 @@ void ib_drain_qp(struct ib_qp *qp)
>  	ib_drain_sq(qp);
>  	if (!qp->srq)
>  		ib_drain_rq(qp);
> +	else
> +		__ib_drain_srq(qp);
>  }
>  EXPORT_SYMBOL(ib_drain_qp);
> diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
> index fd84cda..c5febae 100644
> --- a/include/rdma/ib_verbs.h
> +++ b/include/rdma/ib_verbs.h
> @@ -1728,6 +1728,7 @@ struct ib_qp {
>  	struct list_head	rdma_mrs;
>  	struct list_head	sig_mrs;
>  	struct ib_srq	       *srq;
> +	struct completion	srq_completion;
>  	struct ib_xrcd	       *xrcd; /* XRC TGT QPs only */
>  	struct list_head	xrcd_list;
> 
> @@ -3060,6 +3061,13 @@ int ib_modify_qp(struct ib_qp *qp,
>  		 int qp_attr_mask);
> 
>  /**
> + * ib_notify_qp - Notifies the QP for event arrival
> + * @qp: The QP to notify.
> + * @event: Specifies the event to notify.
> + */
> +int ib_notify_qp(struct ib_qp *qp, enum ib_event_type event);
> +
> +/**
>   * ib_query_qp - Returns the attribute list and current values for the
>   *   specified QP.
>   * @qp: The QP to query.
> --
> 1.8.3.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: "Steve Wise" <swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>
To: 'Max Gurtovoy' <maxg-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
	jgg-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org,
	dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
	linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-nvme-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	sagi-NQWnxTmZq1alnMjI0IkVqw@public.gmane.org,
	bart.vanassche-Sjgp3cTcYWE@public.gmane.org,
	hch-jcswGhMUV9g@public.gmane.org
Cc: danielm-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org
Subject: RE: [PATCH 1/4] IB/core: add support for draining Shared receive queues
Date: Wed, 17 Jan 2018 09:35:07 -0600	[thread overview]
Message-ID: <02bd01d38fa8$c09a9430$41cfbc90$@opengridcomputing.com> (raw)
In-Reply-To: <1516197178-26493-2-git-send-email-maxg-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>

> 
> To avoid theoretical leakage for QPs assocoated with SRQ,
> according to IB spec (section 10.3.1):
> 
> "Note, for QPs that are associated with an SRQ, the Consumer should take
> the QP through the Error State before invoking a Destroy QP or a Modify
> QP to the Reset State. The Consumer may invoke the Destroy QP without
> first performing a Modify QP to the Error State and waiting for the
Affiliated
> Asynchronous Last WQE Reached Event. However, if the Consumer
> does not wait for the Affiliated Asynchronous Last WQE Reached Event,
> then WQE and Data Segment leakage may occur. Therefore, it is good
> programming practice to tear down a QP that is associated with an SRQ
> by using the following process:
>  - Put the QP in the Error State;
>  - wait for the Affiliated Asynchronous Last WQE Reached Event;
>  - either:
>    - drain the CQ by invoking the Poll CQ verb and either wait for CQ
>      to be empty or the number of Poll CQ operations has exceeded
>      CQ capacity size; or
>    - post another WR that completes on the same CQ and wait for this
>      WR to return as a WC;
>  - and then invoke a Destroy QP or Reset QP."
> 
> Signed-off-by: Max Gurtovoy <maxg-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
> ---
>  drivers/infiniband/core/verbs.c | 69
> ++++++++++++++++++++++++++++++++++++++++-
>  include/rdma/ib_verbs.h         |  8 +++++
>  2 files changed, 76 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/infiniband/core/verbs.c
b/drivers/infiniband/core/verbs.c
> index 7868727..7604450 100644
> --- a/drivers/infiniband/core/verbs.c
> +++ b/drivers/infiniband/core/verbs.c
> @@ -886,8 +886,10 @@ struct ib_qp *ib_create_qp(struct ib_pd *pd,
>  		if (qp_init_attr->recv_cq)
>  			atomic_inc(&qp_init_attr->recv_cq->usecnt);
>  		qp->srq = qp_init_attr->srq;
> -		if (qp->srq)
> +		if (qp->srq) {
>  			atomic_inc(&qp_init_attr->srq->usecnt);
> +			init_completion(&qp->srq_completion);
> +		}
>  	}
> 
>  	qp->pd	    = pd;
> @@ -1405,6 +1407,22 @@ int ib_get_eth_speed(struct ib_device *dev, u8
> port_num, u8 *speed, u8 *width)
>  }
>  EXPORT_SYMBOL(ib_get_eth_speed);
> 
> +int ib_notify_qp(struct ib_qp *qp, enum ib_event_type event)
> +{
> +	int ret = 0;
> +
> +	switch (event) {
> +	case IB_EVENT_QP_LAST_WQE_REACHED:
> +		complete(&qp->srq_completion);
> +		break;
> +	default:
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(ib_notify_qp);
> +
>  int ib_modify_qp(struct ib_qp *qp,
>  		 struct ib_qp_attr *qp_attr,
>  		 int qp_attr_mask)
> @@ -2213,6 +2231,53 @@ static void __ib_drain_rq(struct ib_qp *qp)
>  		wait_for_completion(&rdrain.done);
>  }
> 
> +/*
> + * __ib_drain_srq() - Block until all Last WQE Reached event arrives, or
> + *                    timeout expires (best effort).
> + * @qp:               queue pair associated with SRQ to drain
> + *
> + * In order to avoid WQE and data segment leakage, one should destroy
> + * QP associated after performing the following:
> + *  - moving QP to err state
> + *  - wait for the Affiliated Asynchronous Last WQE Reached Event
> + *  - drain the CQ
> + */
> +static void __ib_drain_srq(struct ib_qp *qp)
> +{
> +	struct ib_qp_attr attr = { .qp_state = IB_QPS_ERR };
> +	struct ib_cq *cq;
> +	int ret;
> +
> +	if (!qp->srq) {
> +		WARN_ONCE(1, "QP 0x%p is not associated with SRQ\n", qp);
> +		return;
> +	}
> +
> +	ret = ib_modify_qp(qp, &attr, IB_QP_STATE);
> +	if (ret) {
> +		WARN_ONCE(ret, "failed to drain shared recv queue: %d\n",
> ret);
> +		return;
> +	}
> +
> +	if (ib_srq_has_cq(qp->srq->srq_type)) {
> +		cq = qp->srq->ext.cq;
> +	} else if (qp->recv_cq) {
> +		cq = qp->recv_cq;
> +	} else {
> +		WARN_ONCE(1, "QP 0x%p has no CQ associated with SRQ\n",
> qp);
> +		return;
> +	}
> +
> +	/*
> +         * ULP should invoke ib_notify_qp on IB_EVENT_QP_LAST_WQE_REACHED
> +         * arrival, otherwise timeout will expire and leakage may occur.
> +         * Use long timeout, for the buggy ULPs/HCAs that don't notify
the
> +         * QP nor raising IB_EVENT_QP_LAST_WQE_REACHED event.
> +         */
> +	if (wait_for_completion_timeout(&qp->srq_completion, 10 * HZ) > 0)
> +		ib_process_cq_direct(cq, -1);
> +}
> +

Perhaps a WARN_ONCE is warranted? 


>  /**
>   * ib_drain_sq() - Block until all SQ CQEs have been consumed by the
>   *		   application.
> @@ -2289,5 +2354,7 @@ void ib_drain_qp(struct ib_qp *qp)
>  	ib_drain_sq(qp);
>  	if (!qp->srq)
>  		ib_drain_rq(qp);
> +	else
> +		__ib_drain_srq(qp);
>  }
>  EXPORT_SYMBOL(ib_drain_qp);
> diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
> index fd84cda..c5febae 100644
> --- a/include/rdma/ib_verbs.h
> +++ b/include/rdma/ib_verbs.h
> @@ -1728,6 +1728,7 @@ struct ib_qp {
>  	struct list_head	rdma_mrs;
>  	struct list_head	sig_mrs;
>  	struct ib_srq	       *srq;
> +	struct completion	srq_completion;
>  	struct ib_xrcd	       *xrcd; /* XRC TGT QPs only */
>  	struct list_head	xrcd_list;
> 
> @@ -3060,6 +3061,13 @@ int ib_modify_qp(struct ib_qp *qp,
>  		 int qp_attr_mask);
> 
>  /**
> + * ib_notify_qp - Notifies the QP for event arrival
> + * @qp: The QP to notify.
> + * @event: Specifies the event to notify.
> + */
> +int ib_notify_qp(struct ib_qp *qp, enum ib_event_type event);
> +
> +/**
>   * ib_query_qp - Returns the attribute list and current values for the
>   *   specified QP.
>   * @qp: The QP to query.
> --
> 1.8.3.1
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2018-01-17 15:35 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-17 13:52 [PATCH 0/4] Last WQE Reached event treatment Max Gurtovoy
2018-01-17 13:52 ` Max Gurtovoy
2018-01-17 13:52 ` [PATCH 1/4] IB/core: add support for draining Shared receive queues Max Gurtovoy
2018-01-17 13:52   ` Max Gurtovoy
2018-01-17 15:35   ` Steve Wise [this message]
2018-01-17 15:35     ` Steve Wise
2018-01-18 18:06     ` Bart Van Assche
2018-01-18 18:06       ` Bart Van Assche
2018-01-17 16:11   ` Bart Van Assche
2018-01-17 16:11     ` Bart Van Assche
2018-01-18 10:31     ` Max Gurtovoy
2018-01-18 10:31       ` Max Gurtovoy
2018-01-24  6:39   ` Sagi Grimberg
2018-01-24  6:39     ` Sagi Grimberg
2018-01-24 10:20     ` Max Gurtovoy
2018-01-24 10:20       ` Max Gurtovoy
2018-01-17 13:52 ` [PATCH 2/4] nvmet-rdma: notify QP on Last WQE Reached event arrival Max Gurtovoy
2018-01-17 13:52   ` Max Gurtovoy
2018-01-17 15:37   ` Steve Wise
2018-01-17 15:37     ` Steve Wise
2018-01-18 18:04     ` Bart Van Assche
2018-01-18 18:04       ` Bart Van Assche
2018-01-17 13:52 ` [PATCH 3/4] iser-target: remove dead code Max Gurtovoy
2018-01-17 13:52   ` Max Gurtovoy
2018-01-17 13:52 ` [PATCH 4/4] IB/srpt: notify QP on Last WQE Reached event arrival Max Gurtovoy
2018-01-17 13:52   ` Max Gurtovoy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='02bd01d38fa8$c09a9430$41cfbc90$@opengridcomputing.com' \
    --to=swise@opengridcomputing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.