RE: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board

["Muhammad Ghias" <mghias@connecttech.com>]

Hi Marc,

I tested the patch v2 with kernel 3.6.1 and 3.7-rc1. Clean compile and works
with hardware.

Regards,
Muhammad

-----Original Message-----
From: Marc Kleine-Budde [mailto:mkl@pengutronix.de] 
Sent: October-17-12 6:13 AM
To: Muhammad Ghias
Cc: 'Wolfgang Grandegger'; linux-kernel@vger.kernel.org;
linux-can@vger.kernel.org
Subject: Re: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's
Canpro/104-Plus Opto CAN board

On 10/16/2012 11:03 PM, Muhammad Ghias wrote:
> Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030
> bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested
> with kernel 3.6.1.
> 
> If you have any questions or any feedback please let me know.

Thanks, the code looks good. Please try, if possible, to send your
patches via git send-email, as outlooks messed up the patch. I've fixed
all line wrapping problems by hand, applied the patch and send a v2,
please test.

regards, Marc

P.S.: Please use the linux-can@vger.kernel.org mailing list for CAN
related patches/topics.

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |