All of lore.kernel.org
 help / color / mirror / Atom feed
* sgi O2 supported?
@ 2017-01-07 19:34 Waldemar Brodkorb
  2017-01-07 19:54 ` Andrei Borzenkov
  2017-01-07 20:34 ` Vladimir 'phcoder' Serbinenko
  0 siblings, 2 replies; 6+ messages in thread
From: Waldemar Brodkorb @ 2017-01-07 19:34 UTC (permalink / raw)
  To: grub-devel

Hi,

can I use grub to bootup Linux/mips64 from SCSI disk on a
SGI O2 machine?

I cross-compiled grub (git hash
07662af7aed55bcec448bc2a6610de1f0cb62100). 
The toolchain is fine, I can bootup a Linux system via TFTP.

I create a grub.img with following modules included:
boot linux ext2 part_dvh normal

I copy grub.img with dvhtool to the volume header and
try to bootup:

> setenv OSLoader grub
> boot
341112
Cannot load scsi(0)disk(1)rdisk(0)partition(8)/grub.
Range check failure: text start 0x881ffde0, size 0x53478.
Text section would overwrite an already loaded program.Unable to
execute scsi(0)disk(1)rdisk(0)partition(8)/grub:  not enough space
Unable to load scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough
space

Seems like the load address is bad?

Is it possible to use grub for this task?

best regards
 Waldemar


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2017-01-09 15:36 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-07 19:34 sgi O2 supported? Waldemar Brodkorb
2017-01-07 19:54 ` Andrei Borzenkov
2017-01-07 20:11   ` Waldemar Brodkorb
2017-01-09 15:36     ` Lennart Sorensen
2017-01-07 20:34 ` Vladimir 'phcoder' Serbinenko
2017-01-08  7:14   ` Waldemar Brodkorb

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.