* sgi O2 supported?
@ 2017-01-07 19:34 Waldemar Brodkorb
2017-01-07 19:54 ` Andrei Borzenkov
2017-01-07 20:34 ` Vladimir 'phcoder' Serbinenko
0 siblings, 2 replies; 6+ messages in thread
From: Waldemar Brodkorb @ 2017-01-07 19:34 UTC (permalink / raw)
To: grub-devel
Hi,
can I use grub to bootup Linux/mips64 from SCSI disk on a
SGI O2 machine?
I cross-compiled grub (git hash
07662af7aed55bcec448bc2a6610de1f0cb62100).
The toolchain is fine, I can bootup a Linux system via TFTP.
I create a grub.img with following modules included:
boot linux ext2 part_dvh normal
I copy grub.img with dvhtool to the volume header and
try to bootup:
> setenv OSLoader grub
> boot
341112
Cannot load scsi(0)disk(1)rdisk(0)partition(8)/grub.
Range check failure: text start 0x881ffde0, size 0x53478.
Text section would overwrite an already loaded program.Unable to
execute scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough space
Unable to load scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough
space
Seems like the load address is bad?
Is it possible to use grub for this task?
best regards
Waldemar
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: sgi O2 supported?
2017-01-07 19:34 sgi O2 supported? Waldemar Brodkorb
@ 2017-01-07 19:54 ` Andrei Borzenkov
2017-01-07 20:11 ` Waldemar Brodkorb
2017-01-07 20:34 ` Vladimir 'phcoder' Serbinenko
1 sibling, 1 reply; 6+ messages in thread
From: Andrei Borzenkov @ 2017-01-07 19:54 UTC (permalink / raw)
To: The development of GNU GRUB
07.01.2017 22:34, Waldemar Brodkorb пишет:
> Hi,
>
> can I use grub to bootup Linux/mips64 from SCSI disk on a
> SGI O2 machine?
>
> I cross-compiled grub (git hash
> 07662af7aed55bcec448bc2a6610de1f0cb62100).
> The toolchain is fine, I can bootup a Linux system via TFTP.
>
> I create a grub.img
For which platform?
> with following modules included:
> boot linux ext2 part_dvh normal
>
> I copy grub.img with dvhtool to the volume header and
> try to bootup:
>
>> setenv OSLoader grub
>> boot
> 341112
> Cannot load scsi(0)disk(1)rdisk(0)partition(8)/grub.
> Range check failure: text start 0x881ffde0, size 0x53478.
> Text section would overwrite an already loaded program.Unable to
> execute scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough space
> Unable to load scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough
> space
>
> Seems like the load address is bad?
>
> Is it possible to use grub for this task?
>
> best regards
> Waldemar
>
> _______________________________________________
> Grub-devel mailing list
> Grub-devel@gnu.org
> https://lists.gnu.org/mailman/listinfo/grub-devel
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: sgi O2 supported?
2017-01-07 19:54 ` Andrei Borzenkov
@ 2017-01-07 20:11 ` Waldemar Brodkorb
2017-01-09 15:36 ` Lennart Sorensen
0 siblings, 1 reply; 6+ messages in thread
From: Waldemar Brodkorb @ 2017-01-07 20:11 UTC (permalink / raw)
To: The development of GNU GRUB
Hi,
Andrei Borzenkov wrote,
> 07.01.2017 22:34, Waldemar Brodkorb пишет:
> > Hi,
> >
> > can I use grub to bootup Linux/mips64 from SCSI disk on a
> > SGI O2 machine?
> >
> > I cross-compiled grub (git hash
> > 07662af7aed55bcec448bc2a6610de1f0cb62100).
> > The toolchain is fine, I can bootup a Linux system via TFTP.
> >
> > I create a grub.img
>
> For which platform?
Grub is cross-compiled for platform arc.
Isn't arc the right choice? I thought ARC/ARCS is the prom
inside the SGI machine.
http://cgit.openadk.org/cgi/cgit/openadk.git/tree/package/grub/Makefile
best regards
Waldemar
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: sgi O2 supported?
2017-01-07 19:34 sgi O2 supported? Waldemar Brodkorb
2017-01-07 19:54 ` Andrei Borzenkov
@ 2017-01-07 20:34 ` Vladimir 'phcoder' Serbinenko
2017-01-08 7:14 ` Waldemar Brodkorb
1 sibling, 1 reply; 6+ messages in thread
From: Vladimir 'phcoder' Serbinenko @ 2017-01-07 20:34 UTC (permalink / raw)
To: The development of GNU GRUB
[-- Attachment #1: Type: text/plain, Size: 1201 bytes --]
Can you send me an image (of any bootloade) that boots? We can then try
another address then
On Sat, 7 Jan 2017, 20:34 Waldemar Brodkorb <wbx@openadk.org> wrote:
> Hi,
>
> can I use grub to bootup Linux/mips64 from SCSI disk on a
> SGI O2 machine?
>
> I cross-compiled grub (git hash
> 07662af7aed55bcec448bc2a6610de1f0cb62100).
> The toolchain is fine, I can bootup a Linux system via TFTP.
>
> I create a grub.img with following modules included:
> boot linux ext2 part_dvh normal
>
> I copy grub.img with dvhtool to the volume header and
> try to bootup:
>
> > setenv OSLoader grub
> > boot
> 341112
> Cannot load scsi(0)disk(1)rdisk(0)partition(8)/grub.
> Range check failure: text start 0x881ffde0, size 0x53478.
> Text section would overwrite an already loaded program.Unable to
> execute scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough space
> Unable to load scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough
> space
>
> Seems like the load address is bad?
>
> Is it possible to use grub for this task?
>
> best regards
> Waldemar
>
> _______________________________________________
> Grub-devel mailing list
> Grub-devel@gnu.org
> https://lists.gnu.org/mailman/listinfo/grub-devel
>
[-- Attachment #2: Type: text/html, Size: 2381 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: sgi O2 supported?
2017-01-07 20:34 ` Vladimir 'phcoder' Serbinenko
@ 2017-01-08 7:14 ` Waldemar Brodkorb
0 siblings, 0 replies; 6+ messages in thread
From: Waldemar Brodkorb @ 2017-01-08 7:14 UTC (permalink / raw)
To: The development of GNU GRUB
Hi Vladimir,
Vladimir 'phcoder' Serbinenko wrote,
> Can you send me an image (of any bootloade) that boots? We can then try another
> address then
http://debug.openadk.org/arc/
The arcboot.ip32 is for SGI O2, the arcboot.ip22 for SGI Indy.
The arcboot.ip32 at least executes fine on my SGI O2. (it is MIPS32
binary)
I need to check if ARCS can execute arcboot compiled to ELF64
binary.
best regards
Waldemar
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: sgi O2 supported?
2017-01-07 20:11 ` Waldemar Brodkorb
@ 2017-01-09 15:36 ` Lennart Sorensen
0 siblings, 0 replies; 6+ messages in thread
From: Lennart Sorensen @ 2017-01-09 15:36 UTC (permalink / raw)
To: The development of GNU GRUB
On Sat, Jan 07, 2017 at 09:11:54PM +0100, Waldemar Brodkorb wrote:
> Grub is cross-compiled for platform arc.
> Isn't arc the right choice? I thought ARC/ARCS is the prom
> inside the SGI machine.
>
> http://cgit.openadk.org/cgi/cgit/openadk.git/tree/package/grub/Makefile
Well mips-arc should be right, mipsel-arc would not be.
I have not tried grub (or linux) on my SGI since it has an unsupported
video board, so IRIX is all I get to play with on it.
--
Len Sorensen
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-01-09 15:36 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-07 19:34 sgi O2 supported? Waldemar Brodkorb
2017-01-07 19:54 ` Andrei Borzenkov
2017-01-07 20:11 ` Waldemar Brodkorb
2017-01-09 15:36 ` Lennart Sorensen
2017-01-07 20:34 ` Vladimir 'phcoder' Serbinenko
2017-01-08 7:14 ` Waldemar Brodkorb
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.