All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH v2 0/4] Add network support for Ocelots SoCs
@ 2019-01-16 13:07 Gregory CLEMENT
  2019-01-16 13:07 ` [U-Boot] [PATCH v2 1/4] MIPS: mscc: ocelot: Add ethernet nodes for Ocelot Gregory CLEMENT
                   ` (3 more replies)
  0 siblings, 4 replies; 11+ messages in thread
From: Gregory CLEMENT @ 2019-01-16 13:07 UTC (permalink / raw)
  To: u-boot

Hello,

this the second version of a series allowing to use the switch
component of the Ocelots SoC as a network interface.

The binding used is exactly the same of the one already used by Linux.

There is also a patch adding a workaround needed on the Ocelot based
boards: indeed the pin connected to the DDR reset is part of the
switch subsystem. So we need ensure that the DDR is not reset during
the switch reset.

Gregory

Changelog:
v1 -> v2:
 - Use wait_for_bit_le32() (suggested by Stefan Roese)
 - Use debug() instead of printf() for the debug messages in
   mscc_switch_reset.

Gregory CLEMENT (4):
  MIPS: mscc: ocelot: Add ethernet nodes for Ocelot
  net: add MSCC Ocelot switch support
  MIPS: mscc: ocelot: add switch reset support
  configs: mscc_ocelot: add network support

 MAINTAINERS                     |   1 +
 arch/mips/dts/mscc,ocelot.dtsi  |  97 ++++
 arch/mips/dts/ocelot_pcb123.dts |  20 +
 board/mscc/ocelot/ocelot.c      |  26 +
 configs/mscc_ocelot_defconfig   |   1 +
 drivers/net/Kconfig             |   7 +
 drivers/net/Makefile            |   1 +
 drivers/net/ocelot_switch.c     | 837 ++++++++++++++++++++++++++++++++
 8 files changed, 990 insertions(+)
 create mode 100644 drivers/net/ocelot_switch.c

-- 
2.20.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2019-01-16 15:34 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-01-16 13:07 [U-Boot] [PATCH v2 0/4] Add network support for Ocelots SoCs Gregory CLEMENT
2019-01-16 13:07 ` [U-Boot] [PATCH v2 1/4] MIPS: mscc: ocelot: Add ethernet nodes for Ocelot Gregory CLEMENT
2019-01-16 13:07 ` [U-Boot] [PATCH v2 2/4] net: add MSCC Ocelot switch support Gregory CLEMENT
2019-01-16 13:56   ` Daniel Schwierzeck
2019-01-16 14:21     ` Gregory CLEMENT
2019-01-16 14:43       ` Daniel Schwierzeck
2019-01-16 13:07 ` [U-Boot] [PATCH v2 3/4] MIPS: mscc: ocelot: add switch reset support Gregory CLEMENT
2019-01-16 13:59   ` Daniel Schwierzeck
2019-01-16 14:37     ` Gregory CLEMENT
2019-01-16 15:34       ` Daniel Schwierzeck
2019-01-16 13:07 ` [U-Boot] [PATCH v2 4/4] configs: mscc_ocelot: add network support Gregory CLEMENT

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.