From: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: Romain Perier <romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH] arm64: dts: rockchip: Add basic DVFS support for RK3368
Date: Fri, 18 Aug 2017 10:20:51 +0200 [thread overview]
Message-ID: <10444104.mndukromaz@phil> (raw)
In-Reply-To: <20170818075053.8779-1-romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Am Freitag, 18. August 2017, 09:50:53 CEST schrieb Romain Perier:
> This adds and enable the operating points that have been tested and are
> currently supported by the SoC.
>
> Signed-off-by: Romain Perier <romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> ---
>
> Note: RK3288 is using operating-points binding v1, while RK3399 is using
> binding v2. I can send another iteration for switching to binding v2,
> if required.
Yes please use v2 for _new_ operating points :-) .
One more thing down below.
>
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> index 6d5dc0587e59..f2ae3bf9377a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> @@ -113,8 +113,18 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x0>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> + operating-points = <
> + /* KHz uV */
> + 312000 950000
> + 408000 950000
> + 600000 950000
> + 816000 1025000
> + 1008000 1125000
> + >;
>
> #cooling-cells = <2>; /* min followed by max */
> + clock-latency = <40000>;
> };
>
> cpu_l1: cpu@1 {
> @@ -122,6 +132,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x1>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> };
>
> cpu_l2: cpu@2 {
> @@ -129,6 +140,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x2>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> };
>
> cpu_l3: cpu@3 {
> @@ -136,6 +148,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x3>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> };
>
> cpu_b0: cpu@100 {
> @@ -143,8 +156,18 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x100>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> + operating-points = <
> + /* KHz uV */
> + 312000 950000
> + 408000 950000
> + 600000 950000
> + 816000 975000
> + 1008000 1050000
> + >;
>
> #cooling-cells = <2>; /* min followed by max */
> + clock-latency = <40000>;
> };
>
> cpu_b1: cpu@101 {
> @@ -152,6 +175,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x101>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> };
>
> cpu_b2: cpu@102 {
> @@ -159,6 +183,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x102>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> };
>
> cpu_b3: cpu@103 {
> @@ -166,9 +191,11 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x103>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> };
> };
>
> +
unnecessary empty line
> amba {
> compatible = "simple-bus";
> #address-cells = <2>;
>
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: rockchip: Add basic DVFS support for RK3368
Date: Fri, 18 Aug 2017 10:20:51 +0200 [thread overview]
Message-ID: <10444104.mndukromaz@phil> (raw)
In-Reply-To: <20170818075053.8779-1-romain.perier@collabora.com>
Am Freitag, 18. August 2017, 09:50:53 CEST schrieb Romain Perier:
> This adds and enable the operating points that have been tested and are
> currently supported by the SoC.
>
> Signed-off-by: Romain Perier <romain.perier@collabora.com>
> ---
>
> Note: RK3288 is using operating-points binding v1, while RK3399 is using
> binding v2. I can send another iteration for switching to binding v2,
> if required.
Yes please use v2 for _new_ operating points :-) .
One more thing down below.
>
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> index 6d5dc0587e59..f2ae3bf9377a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> @@ -113,8 +113,18 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x0>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> + operating-points = <
> + /* KHz uV */
> + 312000 950000
> + 408000 950000
> + 600000 950000
> + 816000 1025000
> + 1008000 1125000
> + >;
>
> #cooling-cells = <2>; /* min followed by max */
> + clock-latency = <40000>;
> };
>
> cpu_l1: cpu at 1 {
> @@ -122,6 +132,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x1>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> };
>
> cpu_l2: cpu at 2 {
> @@ -129,6 +140,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x2>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> };
>
> cpu_l3: cpu at 3 {
> @@ -136,6 +148,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x3>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> };
>
> cpu_b0: cpu at 100 {
> @@ -143,8 +156,18 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x100>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> + operating-points = <
> + /* KHz uV */
> + 312000 950000
> + 408000 950000
> + 600000 950000
> + 816000 975000
> + 1008000 1050000
> + >;
>
> #cooling-cells = <2>; /* min followed by max */
> + clock-latency = <40000>;
> };
>
> cpu_b1: cpu at 101 {
> @@ -152,6 +175,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x101>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> };
>
> cpu_b2: cpu at 102 {
> @@ -159,6 +183,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x102>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> };
>
> cpu_b3: cpu at 103 {
> @@ -166,9 +191,11 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x103>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> };
> };
>
> +
unnecessary empty line
> amba {
> compatible = "simple-bus";
> #address-cells = <2>;
>
Heiko
next prev parent reply other threads:[~2017-08-18 8:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-18 7:50 [PATCH] arm64: dts: rockchip: Add basic DVFS support for RK3368 Romain Perier
2017-08-18 7:50 ` Romain Perier
[not found] ` <20170818075053.8779-1-romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2017-08-18 8:20 ` Heiko Stuebner [this message]
2017-08-18 8:20 ` Heiko Stuebner
2017-08-18 9:40 ` Romain Perier
2017-08-18 9:40 ` Romain Perier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10444104.mndukromaz@phil \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.