[PATCH] i2c driver changes for 2.5.64

[greg@kroah.com (Greg KH)]

ChangeSet 1.1109, 2003/03/13 11:52:26-08:00, greg@kroah.com

i2c: add bus driver for Intel PIIX4 devices

This is from the i2c CVS tree.


 drivers/i2c/busses/Kconfig     |   25 +
 drivers/i2c/busses/Makefile    |    1 
 drivers/i2c/busses/i2c-piix4.c |  529 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 554 insertions(+), 1 deletion(-)


diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig	Thu Mar 13 16:57:33 2003
+++ b/drivers/i2c/busses/Kconfig	Thu Mar 13 16:57:33 2003
@@ -55,7 +55,7 @@
 
 config I2C_I801
 	tristate "  Intel 801"
-	depends on I2C && I2C_PROC
+	depends on I2C && I2C_PROC && PCI && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  801 family of mainboard I2C interfaces.  Specifically, the following
@@ -71,6 +71,29 @@
 	  say M here and read <file:Documentation/modules.txt>.
 
 	  The module will be called i2c-i801.
+
+	  You will also need the latest user-space utilties: you can find them
+	  in the lm_sensors package, which you can download at 
+	  http://www.lm-sensors.nu
+
+config I2C_PIIX4
+	tristate "  Intel PIIX4"
+	depends on I2C && I2C_PROC && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
+	  versions of the chipset is supported:
+	    Intel PIIX4
+	    Intel 440MX
+	    Serverworks OSB4
+	    Serverworks CSB5
+	    SMSC Victory66
+
+	  This can also be built as a module which can be inserted and removed 
+	  while the kernel is running.  If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+	  The module will be called i2c-piix4.
 
 	  You will also need the latest user-space utilties: you can find them
 	  in the lm_sensors package, which you can download at 
diff -Nru a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
--- a/drivers/i2c/busses/Makefile	Thu Mar 13 16:57:33 2003
+++ b/drivers/i2c/busses/Makefile	Thu Mar 13 16:57:33 2003
@@ -6,3 +6,4 @@
 obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
 obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
 obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
+obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
diff -Nru a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/drivers/i2c/busses/i2c-piix4.c	Thu Mar 13 16:57:33 2003
@@ -0,0 +1,529 @@
+/*
+    piix4.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   Supports:
+	Intel PIIX4, 440MX
+	Serverworks OSB4, CSB5
+	SMSC Victory66
+
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/apm_bios.h>
+#include <asm/io.h>
+
+
+struct sd {
+	const unsigned short mfr;
+	const unsigned short dev;
+	const unsigned char fn;
+	const char *name;
+};
+
+/* Note: We assume all devices are identical
+         to the Intel PIIX4; we only mention it during detection.   */
+
+static struct sd supported[] = {
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, 3, "PIIX4"},
+	{PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4, 0, "OSB4"},
+	{PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5, 0, "CSB5"},
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, 3, "440MX"},
+	{PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3, 0, "Victory66"},
+	{0, 0, 0, NULL}
+};
+
+/* PIIX4 SMBus address offsets */
+#define SMBHSTSTS (0 + piix4_smba)
+#define SMBHSLVSTS (1 + piix4_smba)
+#define SMBHSTCNT (2 + piix4_smba)
+#define SMBHSTCMD (3 + piix4_smba)
+#define SMBHSTADD (4 + piix4_smba)
+#define SMBHSTDAT0 (5 + piix4_smba)
+#define SMBHSTDAT1 (6 + piix4_smba)
+#define SMBBLKDAT (7 + piix4_smba)
+#define SMBSLVCNT (8 + piix4_smba)
+#define SMBSHDWCMD (9 + piix4_smba)
+#define SMBSLVEVT (0xA + piix4_smba)
+#define SMBSLVDAT (0xC + piix4_smba)
+
+/* PCI Address Constants */
+#define SMBBA     0x090
+#define SMBHSTCFG 0x0D2
+#define SMBSLVC   0x0D3
+#define SMBSHDW1  0x0D4
+#define SMBSHDW2  0x0D5
+#define SMBREV    0x0D6
+
+/* Other settings */
+#define MAX_TIMEOUT 500
+#define  ENABLE_INT9 0
+
+/* PIIX4 constants */
+#define PIIX4_QUICK      0x00
+#define PIIX4_BYTE       0x04
+#define PIIX4_BYTE_DATA  0x08
+#define PIIX4_WORD_DATA  0x0C
+#define PIIX4_BLOCK_DATA 0x14
+
+/* insmod parameters */
+
+/* If force is set to anything different from 0, we forcibly enable the
+   PIIX4. DANGEROUS! */
+static int force = 0;
+MODULE_PARM(force, "i");
+MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the PIIX4 at the given address. VERY DANGEROUS! */
+static int force_addr = 0;
+MODULE_PARM(force_addr, "i");
+MODULE_PARM_DESC(force_addr,
+		 "Forcibly enable the PIIX4 at the given address. "
+		 "EXTREMELY DANGEROUS!");
+
+static void piix4_do_pause(unsigned int amount);
+static int piix4_transaction(void);
+
+
+static unsigned short piix4_smba = 0;
+
+#ifdef CONFIG_X86
+/*
+ * Get DMI information.
+ */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,34)
+void dmi_scan_mach(void);
+#endif
+
+static int __init ibm_dmi_probe(void)
+{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
+	extern int is_unsafe_smbus;
+	return is_unsafe_smbus;
+#else
+#define IBM_SIGNATURE		"IBM"
+	dmi_scan_mach();
+	if(dmi_ident[DMI_SYS_VENDOR] = NULL)
+		return 0;
+	if(strncmp(dmi_ident[DMI_SYS_VENDOR], IBM_SIGNATURE,
+	           strlen(IBM_SIGNATURE)) = 0)
+		return 1;
+	return 0;
+#endif
+}
+#endif
+
+/* Detect whether a PIIX4 can be found, and initialize it, where necessary.
+   Note the differences between kernels with the old PCI BIOS interface and
+   newer kernels with the real PCI interface. In compat.h some things are
+   defined to make the transition easier. */
+int piix4_setup(void)
+{
+	int error_return = 0;
+	unsigned char temp;
+	struct sd *num = supported;
+	struct pci_dev *PIIX4_dev = NULL;
+
+	if (pci_present() = 0) {
+		error_return = -ENODEV;
+		goto END;
+	}
+
+	/* Look for a supported device/function */
+	do {
+		if((PIIX4_dev = pci_find_device(num->mfr, num->dev,
+					        PIIX4_dev))) {
+			if(PCI_FUNC(PIIX4_dev->devfn) != num->fn)
+				continue;
+			break;
+		}
+		PIIX4_dev = NULL;
+		num++;
+	} while (num->mfr);
+
+	if (PIIX4_dev = NULL) {
+		printk
+		  (KERN_ERR "i2c-piix4.o: Error: Can't detect PIIX4 or compatible device!\n");
+		 error_return = -ENODEV;
+		 goto END;
+	}
+	printk(KERN_INFO "i2c-piix4.o: Found %s device\n", num->name);
+
+#ifdef CONFIG_X86
+	if(ibm_dmi_probe()) {
+		printk
+		  (KERN_ERR "i2c-piix4.o: IBM Laptop detected; this module may corrupt\n");
+		printk
+		  (KERN_ERR "             your serial eeprom! Refusing to load module!\n");
+		 error_return = -EPERM;
+		 goto END;
+	}
+#endif
+
+/* Determine the address of the SMBus areas */
+	if (force_addr) {
+		piix4_smba = force_addr & 0xfff0;
+		force = 0;
+	} else {
+		pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
+		piix4_smba &= 0xfff0;
+		if(piix4_smba = 0) {
+			printk(KERN_ERR "i2c-piix4.o: SMB base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n");
+			return -ENODEV;
+		}
+	}
+
+	if (check_region(piix4_smba, 8)) {
+		printk
+		    (KERN_ERR "i2c-piix4.o: SMB region 0x%x already in use!\n",
+		     piix4_smba);
+		error_return = -ENODEV;
+		goto END;
+	}
+
+	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
+/* If force_addr is set, we program the new address here. Just to make
+   sure, we disable the PIIX4 first. */
+	if (force_addr) {
+		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
+		pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
+		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
+		printk
+		    (KERN_INFO "i2c-piix4.o: WARNING: SMBus interface set to new "
+		     "address %04x!\n", piix4_smba);
+	} else if ((temp & 1) = 0) {
+		if (force) {
+/* This should never need to be done, but has been noted that
+   many Dell machines have the SMBus interface on the PIIX4
+   disabled!? NOTE: This assumes I/O space and other allocations WERE
+   done by the Bios!  Don't complain if your hardware does weird 
+   things after enabling this. :') Check for Bios updates before
+   resorting to this.  */
+			pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
+					      temp | 1);
+			printk
+			    (KERN_NOTICE "i2c-piix4.o: WARNING: SMBus interface has been FORCEFULLY "
+			     "ENABLED!\n");
+		} else {
+			printk
+			    (KERN_ERR "i2c-piix4.o: Host SMBus controller not enabled!\n");
+			error_return = -ENODEV;
+			goto END;
+		}
+	}
+
+	/* Everything is happy, let's grab the memory and set things up. */
+	request_region(piix4_smba, 8, "piix4-smbus");
+
+#ifdef DEBUG
+	if ((temp & 0x0E) = 8)
+		printk
+		    (KERN_DEBUG "i2c-piix4.o: Using Interrupt 9 for SMBus.\n");
+	else if ((temp & 0x0E) = 0)
+		printk
+		    (KERN_DEBUG "i2c-piix4.o: Using Interrupt SMI# for SMBus.\n");
+	else
+		printk
+		    (KERN_ERR "i2c-piix4.o: Illegal Interrupt configuration (or code out "
+		     "of date)!\n");
+
+	pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
+	printk(KERN_DEBUG "i2c-piix4.o: SMBREV = 0x%X\n", temp);
+	printk(KERN_DEBUG "i2c-piix4.o: SMBA = 0x%X\n", piix4_smba);
+#endif				/* DEBUG */
+
+      END:
+	return error_return;
+}
+
+
+/* Internally used pause function */
+void piix4_do_pause(unsigned int amount)
+{
+	current->state = TASK_INTERRUPTIBLE;
+	schedule_timeout(amount);
+}
+
+/* Another internally used function */
+int piix4_transaction(void)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+#ifdef DEBUG
+	printk
+	    (KERN_DEBUG "i2c-piix4.o: Transaction (pre): CNT=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, "
+	     "DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD),
+	     inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+#endif
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+#ifdef DEBUG
+		printk(KERN_DEBUG "i2c-piix4.o: SMBus busy (%02x). Resetting... \n",
+		       temp);
+#endif
+		outb_p(temp, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+#ifdef DEBUG
+			printk(KERN_ERR "i2c-piix4.o: Failed! (%02x)\n", temp);
+#endif
+			return -1;
+		} else {
+#ifdef DEBUG
+			printk(KERN_DEBUG "i2c-piix4.o: Successfull!\n");
+#endif
+		}
+	}
+
+	/* start the transaction by setting bit 6 */
+	outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+
+	/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
+	do {
+		piix4_do_pause(1);
+		temp = inb_p(SMBHSTSTS);
+	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+
+#ifdef DEBUG
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		printk(KERN_ERR "i2c-piix4.o: SMBus Timeout!\n");
+		result = -1;
+	}
+#endif
+
+	if (temp & 0x10) {
+		result = -1;
+#ifdef DEBUG
+		printk(KERN_ERR "i2c-piix4.o: Error: Failed bus transaction\n");
+#endif
+	}
+
+	if (temp & 0x08) {
+		result = -1;
+		printk
+		    (KERN_ERR "i2c-piix4.o: Bus collision! SMBus may be locked until next hard\n"
+		     "reset. (sorry!)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+	}
+
+	if (temp & 0x04) {
+		result = -1;
+#ifdef DEBUG
+		printk(KERN_ERR "i2c-piix4.o: Error: no response!\n");
+#endif
+	}
+
+	if (inb_p(SMBHSTSTS) != 0x00)
+		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+
+#ifdef DEBUG
+	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+		printk
+		    (KERN_ERR "i2c-piix4.o: Failed reset at end of transaction (%02x)\n",
+		     temp);
+	}
+	printk
+	    (KERN_DEBUG "i2c-piix4.o: Transaction (post): CNT=%02x, CMD=%02x, ADD=%02x, "
+	     "DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD),
+	     inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+#endif
+	return result;
+}
+
+/* Return -1 on error. */
+s32 piix4_access(struct i2c_adapter * adap, u16 addr,
+		 unsigned short flags, char read_write,
+		 u8 command, int size, union i2c_smbus_data * data)
+{
+	int i, len;
+
+	switch (size) {
+	case I2C_SMBUS_PROC_CALL:
+		printk
+		    (KERN_ERR "i2c-piix4.o: I2C_SMBUS_PROC_CALL not supported!\n");
+		return -1;
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = PIIX4_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		if (read_write = I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		size = PIIX4_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write = I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		size = PIIX4_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write = I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = PIIX4_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write = I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0)
+				len = 0;
+			if (len > 32)
+				len = 32;
+			outb_p(len, SMBHSTDAT0);
+			i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		size = PIIX4_BLOCK_DATA;
+		break;
+	}
+
+	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+
+	if (piix4_transaction())	/* Error in transaction */
+		return -1;
+
+	if ((read_write = I2C_SMBUS_WRITE) || (size = PIIX4_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case PIIX4_BYTE:	/* Where is the result put? I assume here it is in
+				   SMBHSTDAT0 but it might just as well be in the
+				   SMBHSTCMD. No clue in the docs */
+
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case PIIX4_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case PIIX4_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case PIIX4_BLOCK_DATA:
+		data->block[0] = inb_p(SMBHSTDAT0);
+		i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMBBLKDAT);
+		break;
+	}
+	return 0;
+}
+
+
+u32 piix4_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= piix4_access,
+	.functionality	= piix4_func,
+};
+
+static struct i2c_adapter piix4_adapter = {
+	.owner		= THIS_MODULE,
+	.name		= "unset",
+	.id		= I2C_ALGO_SMBUS | I2C_HW_SMBUS_PIIX4,
+	.algo		= &smbus_algorithm,
+};
+
+
+
+static struct pci_device_id piix4_ids[] __devinitdata = {
+	{ 0, }
+};
+
+static int __devinit piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+
+	sprintf(piix4_adapter.name, "SMBus PIIX4 adapter at %04x",
+		piix4_smba);
+
+	i2c_add_adapter(&piix4_adapter);
+}
+
+static void __devexit piix4_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&piix4_adapter);
+}
+
+
+static struct pci_driver piix4_driver = {
+	.name		= "piix4 smbus",
+	.id_table	= piix4_ids,
+	.probe		= piix4_probe,
+	.remove		= __devexit_p(piix4_remove),
+};
+
+static int __init i2c_piix4_init(void)
+{
+	printk("i2c-piix4.o version %s (%s)\n", I2C_VERSION, I2C_DATE);
+	return pci_module_init(&piix4_driver);
+}
+
+
+static void __exit i2c_piix4_exit(void)
+{
+	pci_unregister_driver(&piix4_driver);
+	release_region(piix4_smba, 8);
+}
+
+
+
+MODULE_AUTHOR
+    ("Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("PIIX4 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_piix4_init);
+module_exit(i2c_piix4_exit);