From: gregkh@suse.de (Greg KH)
To: linux-kernel@vger.kernel.org, sensors@Stimpy.netroedge.com
Cc: R.Marek@sh.cvut.cz
Subject: [PATCH] I2C: busses documentation update 1 of 2
Date: Thu, 19 May 2005 06:25:48 +0000 [thread overview]
Message-ID: <1112311393548@kroah.com> (raw)
In-Reply-To: <1112311393634@kroah.com>
In-Reply-To: <11123113933537@kroah.com>
ChangeSet 1.2340, 2005/03/31 14:29:46-08:00, R.Marek@sh.cvut.cz
[PATCH] I2C: busses documentation update 1 of 2
This patch just moves i2c-parport file to busses directory.
Patch for other busses documentation will follow.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/i2c/i2c-parport | 156 -----------------------------------
Documentation/i2c/busses/i2c-parport | 156 +++++++++++++++++++++++++++++++++++
2 files changed, 156 insertions(+), 156 deletions(-)
diff -Nru a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/Documentation/i2c/busses/i2c-parport 2005-03-31 15:17:11 -08:00
@@ -0,0 +1,156 @@
+=========
+i2c-parport driver
+=========
+
+2004-07-06, Jean Delvare
+
+This is a unified driver for several i2c-over-parallel-port adapters,
+such as the ones made by Philips, Velleman or ELV. This driver is
+meant as a replacement for the older, individual drivers:
+ * i2c-philips-par
+ * i2c-elv
+ * i2c-velleman
+ * video/i2c-parport (NOT the same as this one, dedicated to home brew
+ teletext adapters)
+
+It currently supports the following devices:
+ * Philips adapter
+ * home brew teletext adapter
+ * Velleman K8000 adapter
+ * ELV adapter
+ * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032)
+
+These devices use different pinout configurations, so you have to tell
+the driver what you have, using the type module parameter. There is no
+way to autodetect the devices. Support for different pinout configurations
+can be easily added when needed.
+
+
+Building your own adapter
+-------------------------
+
+If you want to build you own i2c-over-parallel-port adapter, here is
+a sample electronics schema (credits go to Sylvain Munaut):
+
+Device PC
+Side ___________________Vdd (+) Side
+ | | |
+ --- --- ---
+ | | | | | |
+ |R| |R| |R|
+ | | | | | |
+ --- --- ---
+ | | |
+ | | /| |
+SCL ----------x--------o |-----------x------------------- pin 2
+ | \| | |
+ | | |
+ | |\ | |
+SDA ----------x----x---| o---x--------------------------- pin 13
+ | |/ |
+ | |
+ | /| |
+ ---------o |----------------x-------------- pin 3
+ \| | |
+ | |
+ --- ---
+ | | | |
+ |R| |R|
+ | | | |
+ --- ---
+ | |
+ ### ###
+ GND GND
+
+Remarks:
+ - This is the exact pinout and electronics used on the Analog Devices
+ evaluation boards.
+ /|
+ - All inverters -o |- must be 74HC05, they must be open collector output.
+ \|
+ - All resitors are 10k.
+ - Pins 18-25 of the parallel port connected to GND.
+ - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high.
+ The ADM1032 evaluation board uses D4-D7. Beware that the amount of
+ current you can draw from the parallel port is limited. Also note that
+ all connected lines MUST BE driven at the same state, else you'll short
+ circuit the output buffers! So plugging the I2C adapter after loading
+ the i2c-parport module might be a good safety since data line state
+ prior to init may be unknown.
+ - This is 5V!
+ - Obviously you cannot read SCL (so it's not really standard-compliant).
+ Pretty easy to add, just copy the SDA part and use another input pin.
+ That would give (ELV compatible pinout):
+
+
+Device PC
+Side ______________________________Vdd (+) Side
+ | | | |
+ --- --- --- ---
+ | | | | | | | |
+ |R| |R| |R| |R|
+ | | | | | | | |
+ --- --- --- ---
+ | | | |
+ | | |\ | |
+SCL ----------x--------x--| o---x------------------------ pin 15
+ | | |/ |
+ | | |
+ | | /| |
+ | ---o |-------------x-------------- pin 2
+ | \| | |
+ | | |
+ | | |
+ | |\ | |
+SDA ---------------x---x--| o--------x------------------- pin 10
+ | |/ |
+ | |
+ | /| |
+ ---o |------------------x--------- pin 3
+ \| | |
+ | |
+ --- ---
+ | | | |
+ |R| |R|
+ | | | |
+ --- ---
+ | |
+ ### ###
+ GND GND
+
+
+If possible, you should use the same pinout configuration as existing
+adapters do, so you won't even have to change the code.
+
+
+Similar (but different) drivers
+-------------------------------
+
+This driver is NOT the same as the i2c-pport driver found in the i2c package.
+The i2c-pport driver makes use of modern parallel port features so that
+you don't need additional electronics. It has other restrictions however, and
+was not ported to Linux 2.6 (yet).
+
+This driver is also NOT the same as the i2c-pcf-epp driver found in the
+lm_sensors package. The i2c-pcf-epp driver doesn't use the parallel port
+as an I2C bus directly. Instead, it uses it to control an external I2C bus
+master. That driver was not ported to Linux 2.6 (yet) either.
+
+
+Legacy documentation for Velleman adapter
+-----------------------------------------
+
+Useful links:
+Velleman http://www.velleman.be/
+Velleman K8000 Howto http://howto.htlw16.ac.at/k8000-howto.html
+
+The project has lead to new libs for the Velleman K8000 and K8005:
+ LIBK8000 v1.99.1 and LIBK8005 v0.21
+With these libs, you can control the K8000 interface card and the K8005
+stepper motor card with the simple commands which are in the original
+Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
+many more, using /dev/velleman.
+ http://home.wanadoo.nl/hihihi/libk8000.htm
+ http://home.wanadoo.nl/hihihi/libk8005.htm
+ http://struyve.mine.nu:8080/index.php?block=k8000
+ http://sourceforge.net/projects/libk8005/
diff -Nru a/Documentation/i2c/i2c-parport b/Documentation/i2c/i2c-parport
--- a/Documentation/i2c/i2c-parport 2005-03-31 15:17:11 -08:00
+++ /dev/null Wed Dec 31 16:00:00 196900
@@ -1,156 +0,0 @@
-=========
-i2c-parport driver
-=========
-
-2004-07-06, Jean Delvare
-
-This is a unified driver for several i2c-over-parallel-port adapters,
-such as the ones made by Philips, Velleman or ELV. This driver is
-meant as a replacement for the older, individual drivers:
- * i2c-philips-par
- * i2c-elv
- * i2c-velleman
- * video/i2c-parport (NOT the same as this one, dedicated to home brew
- teletext adapters)
-
-It currently supports the following devices:
- * Philips adapter
- * home brew teletext adapter
- * Velleman K8000 adapter
- * ELV adapter
- * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032)
-
-These devices use different pinout configurations, so you have to tell
-the driver what you have, using the type module parameter. There is no
-way to autodetect the devices. Support for different pinout configurations
-can be easily added when needed.
-
-
-Building your own adapter
--------------------------
-
-If you want to build you own i2c-over-parallel-port adapter, here is
-a sample electronics schema (credits go to Sylvain Munaut):
-
-Device PC
-Side ___________________Vdd (+) Side
- | | |
- --- --- ---
- | | | | | |
- |R| |R| |R|
- | | | | | |
- --- --- ---
- | | |
- | | /| |
-SCL ----------x--------o |-----------x------------------- pin 2
- | \| | |
- | | |
- | |\ | |
-SDA ----------x----x---| o---x--------------------------- pin 13
- | |/ |
- | |
- | /| |
- ---------o |----------------x-------------- pin 3
- \| | |
- | |
- --- ---
- | | | |
- |R| |R|
- | | | |
- --- ---
- | |
- ### ###
- GND GND
-
-Remarks:
- - This is the exact pinout and electronics used on the Analog Devices
- evaluation boards.
- /|
- - All inverters -o |- must be 74HC05, they must be open collector output.
- \|
- - All resitors are 10k.
- - Pins 18-25 of the parallel port connected to GND.
- - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high.
- The ADM1032 evaluation board uses D4-D7. Beware that the amount of
- current you can draw from the parallel port is limited. Also note that
- all connected lines MUST BE driven at the same state, else you'll short
- circuit the output buffers! So plugging the I2C adapter after loading
- the i2c-parport module might be a good safety since data line state
- prior to init may be unknown.
- - This is 5V!
- - Obviously you cannot read SCL (so it's not really standard-compliant).
- Pretty easy to add, just copy the SDA part and use another input pin.
- That would give (ELV compatible pinout):
-
-
-Device PC
-Side ______________________________Vdd (+) Side
- | | | |
- --- --- --- ---
- | | | | | | | |
- |R| |R| |R| |R|
- | | | | | | | |
- --- --- --- ---
- | | | |
- | | |\ | |
-SCL ----------x--------x--| o---x------------------------ pin 15
- | | |/ |
- | | |
- | | /| |
- | ---o |-------------x-------------- pin 2
- | \| | |
- | | |
- | | |
- | |\ | |
-SDA ---------------x---x--| o--------x------------------- pin 10
- | |/ |
- | |
- | /| |
- ---o |------------------x--------- pin 3
- \| | |
- | |
- --- ---
- | | | |
- |R| |R|
- | | | |
- --- ---
- | |
- ### ###
- GND GND
-
-
-If possible, you should use the same pinout configuration as existing
-adapters do, so you won't even have to change the code.
-
-
-Similar (but different) drivers
--------------------------------
-
-This driver is NOT the same as the i2c-pport driver found in the i2c package.
-The i2c-pport driver makes use of modern parallel port features so that
-you don't need additional electronics. It has other restrictions however, and
-was not ported to Linux 2.6 (yet).
-
-This driver is also NOT the same as the i2c-pcf-epp driver found in the
-lm_sensors package. The i2c-pcf-epp driver doesn't use the parallel port
-as an I2C bus directly. Instead, it uses it to control an external I2C bus
-master. That driver was not ported to Linux 2.6 (yet) either.
-
-
-Legacy documentation for Velleman adapter
------------------------------------------
-
-Useful links:
-Velleman http://www.velleman.be/
-Velleman K8000 Howto http://howto.htlw16.ac.at/k8000-howto.html
-
-The project has lead to new libs for the Velleman K8000 and K8005:
- LIBK8000 v1.99.1 and LIBK8005 v0.21
-With these libs, you can control the K8000 interface card and the K8005
-stepper motor card with the simple commands which are in the original
-Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
-many more, using /dev/velleman.
- http://home.wanadoo.nl/hihihi/libk8000.htm
- http://home.wanadoo.nl/hihihi/libk8005.htm
- http://struyve.mine.nu:8080/index.php?block=k8000
- http://sourceforge.net/projects/libk8005/
WARNING: multiple messages have this Message-ID (diff)
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, sensors@Stimpy.netroedge.com
Cc: R.Marek@sh.cvut.cz
Subject: [PATCH] I2C: busses documentation update 1 of 2
Date: Thu, 31 Mar 2005 15:23:13 -0800 [thread overview]
Message-ID: <1112311393548@kroah.com> (raw)
In-Reply-To: <1112311393634@kroah.com>
ChangeSet 1.2340, 2005/03/31 14:29:46-08:00, R.Marek@sh.cvut.cz
[PATCH] I2C: busses documentation update 1 of 2
This patch just moves i2c-parport file to busses directory.
Patch for other busses documentation will follow.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/i2c/i2c-parport | 156 -----------------------------------
Documentation/i2c/busses/i2c-parport | 156 +++++++++++++++++++++++++++++++++++
2 files changed, 156 insertions(+), 156 deletions(-)
diff -Nru a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/Documentation/i2c/busses/i2c-parport 2005-03-31 15:17:11 -08:00
@@ -0,0 +1,156 @@
+==================
+i2c-parport driver
+==================
+
+2004-07-06, Jean Delvare
+
+This is a unified driver for several i2c-over-parallel-port adapters,
+such as the ones made by Philips, Velleman or ELV. This driver is
+meant as a replacement for the older, individual drivers:
+ * i2c-philips-par
+ * i2c-elv
+ * i2c-velleman
+ * video/i2c-parport (NOT the same as this one, dedicated to home brew
+ teletext adapters)
+
+It currently supports the following devices:
+ * Philips adapter
+ * home brew teletext adapter
+ * Velleman K8000 adapter
+ * ELV adapter
+ * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032)
+
+These devices use different pinout configurations, so you have to tell
+the driver what you have, using the type module parameter. There is no
+way to autodetect the devices. Support for different pinout configurations
+can be easily added when needed.
+
+
+Building your own adapter
+-------------------------
+
+If you want to build you own i2c-over-parallel-port adapter, here is
+a sample electronics schema (credits go to Sylvain Munaut):
+
+Device PC
+Side ___________________Vdd (+) Side
+ | | |
+ --- --- ---
+ | | | | | |
+ |R| |R| |R|
+ | | | | | |
+ --- --- ---
+ | | |
+ | | /| |
+SCL ----------x--------o |-----------x------------------- pin 2
+ | \| | |
+ | | |
+ | |\ | |
+SDA ----------x----x---| o---x--------------------------- pin 13
+ | |/ |
+ | |
+ | /| |
+ ---------o |----------------x-------------- pin 3
+ \| | |
+ | |
+ --- ---
+ | | | |
+ |R| |R|
+ | | | |
+ --- ---
+ | |
+ ### ###
+ GND GND
+
+Remarks:
+ - This is the exact pinout and electronics used on the Analog Devices
+ evaluation boards.
+ /|
+ - All inverters -o |- must be 74HC05, they must be open collector output.
+ \|
+ - All resitors are 10k.
+ - Pins 18-25 of the parallel port connected to GND.
+ - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high.
+ The ADM1032 evaluation board uses D4-D7. Beware that the amount of
+ current you can draw from the parallel port is limited. Also note that
+ all connected lines MUST BE driven at the same state, else you'll short
+ circuit the output buffers! So plugging the I2C adapter after loading
+ the i2c-parport module might be a good safety since data line state
+ prior to init may be unknown.
+ - This is 5V!
+ - Obviously you cannot read SCL (so it's not really standard-compliant).
+ Pretty easy to add, just copy the SDA part and use another input pin.
+ That would give (ELV compatible pinout):
+
+
+Device PC
+Side ______________________________Vdd (+) Side
+ | | | |
+ --- --- --- ---
+ | | | | | | | |
+ |R| |R| |R| |R|
+ | | | | | | | |
+ --- --- --- ---
+ | | | |
+ | | |\ | |
+SCL ----------x--------x--| o---x------------------------ pin 15
+ | | |/ |
+ | | |
+ | | /| |
+ | ---o |-------------x-------------- pin 2
+ | \| | |
+ | | |
+ | | |
+ | |\ | |
+SDA ---------------x---x--| o--------x------------------- pin 10
+ | |/ |
+ | |
+ | /| |
+ ---o |------------------x--------- pin 3
+ \| | |
+ | |
+ --- ---
+ | | | |
+ |R| |R|
+ | | | |
+ --- ---
+ | |
+ ### ###
+ GND GND
+
+
+If possible, you should use the same pinout configuration as existing
+adapters do, so you won't even have to change the code.
+
+
+Similar (but different) drivers
+-------------------------------
+
+This driver is NOT the same as the i2c-pport driver found in the i2c package.
+The i2c-pport driver makes use of modern parallel port features so that
+you don't need additional electronics. It has other restrictions however, and
+was not ported to Linux 2.6 (yet).
+
+This driver is also NOT the same as the i2c-pcf-epp driver found in the
+lm_sensors package. The i2c-pcf-epp driver doesn't use the parallel port
+as an I2C bus directly. Instead, it uses it to control an external I2C bus
+master. That driver was not ported to Linux 2.6 (yet) either.
+
+
+Legacy documentation for Velleman adapter
+-----------------------------------------
+
+Useful links:
+Velleman http://www.velleman.be/
+Velleman K8000 Howto http://howto.htlw16.ac.at/k8000-howto.html
+
+The project has lead to new libs for the Velleman K8000 and K8005:
+ LIBK8000 v1.99.1 and LIBK8005 v0.21
+With these libs, you can control the K8000 interface card and the K8005
+stepper motor card with the simple commands which are in the original
+Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
+many more, using /dev/velleman.
+ http://home.wanadoo.nl/hihihi/libk8000.htm
+ http://home.wanadoo.nl/hihihi/libk8005.htm
+ http://struyve.mine.nu:8080/index.php?block=k8000
+ http://sourceforge.net/projects/libk8005/
diff -Nru a/Documentation/i2c/i2c-parport b/Documentation/i2c/i2c-parport
--- a/Documentation/i2c/i2c-parport 2005-03-31 15:17:11 -08:00
+++ /dev/null Wed Dec 31 16:00:00 196900
@@ -1,156 +0,0 @@
-==================
-i2c-parport driver
-==================
-
-2004-07-06, Jean Delvare
-
-This is a unified driver for several i2c-over-parallel-port adapters,
-such as the ones made by Philips, Velleman or ELV. This driver is
-meant as a replacement for the older, individual drivers:
- * i2c-philips-par
- * i2c-elv
- * i2c-velleman
- * video/i2c-parport (NOT the same as this one, dedicated to home brew
- teletext adapters)
-
-It currently supports the following devices:
- * Philips adapter
- * home brew teletext adapter
- * Velleman K8000 adapter
- * ELV adapter
- * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032)
-
-These devices use different pinout configurations, so you have to tell
-the driver what you have, using the type module parameter. There is no
-way to autodetect the devices. Support for different pinout configurations
-can be easily added when needed.
-
-
-Building your own adapter
--------------------------
-
-If you want to build you own i2c-over-parallel-port adapter, here is
-a sample electronics schema (credits go to Sylvain Munaut):
-
-Device PC
-Side ___________________Vdd (+) Side
- | | |
- --- --- ---
- | | | | | |
- |R| |R| |R|
- | | | | | |
- --- --- ---
- | | |
- | | /| |
-SCL ----------x--------o |-----------x------------------- pin 2
- | \| | |
- | | |
- | |\ | |
-SDA ----------x----x---| o---x--------------------------- pin 13
- | |/ |
- | |
- | /| |
- ---------o |----------------x-------------- pin 3
- \| | |
- | |
- --- ---
- | | | |
- |R| |R|
- | | | |
- --- ---
- | |
- ### ###
- GND GND
-
-Remarks:
- - This is the exact pinout and electronics used on the Analog Devices
- evaluation boards.
- /|
- - All inverters -o |- must be 74HC05, they must be open collector output.
- \|
- - All resitors are 10k.
- - Pins 18-25 of the parallel port connected to GND.
- - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high.
- The ADM1032 evaluation board uses D4-D7. Beware that the amount of
- current you can draw from the parallel port is limited. Also note that
- all connected lines MUST BE driven at the same state, else you'll short
- circuit the output buffers! So plugging the I2C adapter after loading
- the i2c-parport module might be a good safety since data line state
- prior to init may be unknown.
- - This is 5V!
- - Obviously you cannot read SCL (so it's not really standard-compliant).
- Pretty easy to add, just copy the SDA part and use another input pin.
- That would give (ELV compatible pinout):
-
-
-Device PC
-Side ______________________________Vdd (+) Side
- | | | |
- --- --- --- ---
- | | | | | | | |
- |R| |R| |R| |R|
- | | | | | | | |
- --- --- --- ---
- | | | |
- | | |\ | |
-SCL ----------x--------x--| o---x------------------------ pin 15
- | | |/ |
- | | |
- | | /| |
- | ---o |-------------x-------------- pin 2
- | \| | |
- | | |
- | | |
- | |\ | |
-SDA ---------------x---x--| o--------x------------------- pin 10
- | |/ |
- | |
- | /| |
- ---o |------------------x--------- pin 3
- \| | |
- | |
- --- ---
- | | | |
- |R| |R|
- | | | |
- --- ---
- | |
- ### ###
- GND GND
-
-
-If possible, you should use the same pinout configuration as existing
-adapters do, so you won't even have to change the code.
-
-
-Similar (but different) drivers
--------------------------------
-
-This driver is NOT the same as the i2c-pport driver found in the i2c package.
-The i2c-pport driver makes use of modern parallel port features so that
-you don't need additional electronics. It has other restrictions however, and
-was not ported to Linux 2.6 (yet).
-
-This driver is also NOT the same as the i2c-pcf-epp driver found in the
-lm_sensors package. The i2c-pcf-epp driver doesn't use the parallel port
-as an I2C bus directly. Instead, it uses it to control an external I2C bus
-master. That driver was not ported to Linux 2.6 (yet) either.
-
-
-Legacy documentation for Velleman adapter
------------------------------------------
-
-Useful links:
-Velleman http://www.velleman.be/
-Velleman K8000 Howto http://howto.htlw16.ac.at/k8000-howto.html
-
-The project has lead to new libs for the Velleman K8000 and K8005:
- LIBK8000 v1.99.1 and LIBK8005 v0.21
-With these libs, you can control the K8000 interface card and the K8005
-stepper motor card with the simple commands which are in the original
-Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
-many more, using /dev/velleman.
- http://home.wanadoo.nl/hihihi/libk8000.htm
- http://home.wanadoo.nl/hihihi/libk8005.htm
- http://struyve.mine.nu:8080/index.php?block=k8000
- http://sourceforge.net/projects/libk8005/
next prev parent reply other threads:[~2005-05-19 6:25 UTC|newest]
Thread overview: 158+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-31 23:22 [BK PATCH] I2C patches for 2.6.12-rc1 Greg KH
2005-03-31 23:23 ` [PATCH] i2c/i2c-ite: remove interruptible_sleep_on_timeout() usage Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c/i2c-elektor: " Greg KH
2005-05-19 6:25 ` [PATCH] i2c/i2c-elektor: remove interruptible_sleep_on_timeout() Greg KH
2005-03-31 23:23 ` [PATCH] I2C: New lm92 chip driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Cleanup adm1021 unused defines Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix adm1021 alarms mask Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Kill unused struct members in w83627hf driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Make master_xfer debug messages more useful Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Skip broken detection step in it87 Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: group Intel on I2C Hardware Bus support Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c: new driver for ds1337 RTC Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c: add adt7461 chip support to lm90 driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Clean up of i2c-elektor.c build Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix breakage in m41t00 i2c rtc driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix some i2c algorithm initialization Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Kill outdated defines in i2c.h Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Avoid repeated resets of i2c-viapro Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Recognize new revision of the ADT7463 chip Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix Vaio EEPROM detection Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` Greg KH [this message]
2005-05-19 6:25 ` [PATCH] I2C: busses documentation update 1 of 2 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: busses documentation update 2 " Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: lost arbitration detection for PCF8584 Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: lsb in emc6d102 and adm1027 Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Delete useless instruction in it87 Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix race condition in it87 driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: i2c-s3c2410 functionality and fixes Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c: add adt7461 chip support to lm90 driver's Kconfig entry Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix broken force parameter handling Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix indentation of lm87 driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Drop useless w83781d RT feature Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c: i2c-mv64xxx - set adapter owner and class fields Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-07 9:45 ` [PATCH] i2c: new driver for ds1337 RTC Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 9:59 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-07 11:16 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 13:07 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-07 14:28 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 21:18 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-07 23:17 ` [PATCH] ds1337 1/4 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 23:36 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-08 13:00 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 16:31 ` James Chapman
2005-05-19 6:25 ` James Chapman
2005-05-02 20:41 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-08 8:49 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-07 23:18 ` [PATCH] ds1337 2/4 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 8:51 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-08 13:02 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-02 20:41 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-07 23:18 ` [PATCH] ds1337 3/4 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 10:08 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-08 13:06 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-02 20:41 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-05-04 6:13 ` [PATCH] ds1337 1/3 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-04 8:41 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-04 6:13 ` [PATCH] ds1337 2/3 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-04 9:44 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-04 6:14 ` [PATCH] ds1337 3/3 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-04 10:07 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-10 12:08 ` [PATCH] ds1337 driver works also with ds1339 chip Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-10 12:40 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-10 12:48 ` Russell King
2005-05-19 6:25 ` Russell King
[not found] ` <1DTwF8-18P-00@press.kroah.org>
[not found] ` <20050508204021.627f9cd1.khali@linux-fr.org>
[not found] ` <427E6E21.60001@katalix.com>
[not found] ` <20050508222351.08bfe2e1.khali@linux-fr.org>
2005-05-10 12:18 ` [PATCH] ds1337: export ds1337_do_command Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-10 12:51 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-10 17:55 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-05-10 18:36 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-10 20:30 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-05-11 8:32 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 23:19 ` [PATCH] ds1337 4/4 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 11:08 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-08 12:35 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 16:21 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-08 17:44 ` James Chapman
2005-05-19 6:25 ` James Chapman
2005-04-10 19:51 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-10 21:10 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-12 18:10 ` James Chapman
2005-05-19 6:25 ` James Chapman
2005-04-13 11:04 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-13 19:02 ` James Chapman
2005-05-19 6:25 ` James Chapman
2005-04-13 19:48 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-19 6:25 ` Jean Delvare
2005-04-07 21:29 ` [PATCH] i2c: new driver for ds1337 RTC Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-07 23:16 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1112311393548@kroah.com \
--to=gregkh@suse.de \
--cc=R.Marek@sh.cvut.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=sensors@Stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.