From: gregkh@suse.de (Greg KH)
To: linux-kernel@vger.kernel.org, sensors@Stimpy.netroedge.com
Cc: rafael.espindola@gmail.com
Subject: [PATCH] I2C: lsb in emc6d102 and adm1027
Date: Thu, 19 May 2005 06:25:48 +0000 [thread overview]
Message-ID: <11123113943693@kroah.com> (raw)
In-Reply-To: <1112311394943@kroah.com>
ChangeSet 1.2343, 2005/03/31 14:30:43-08:00, rafael.espindola@gmail.com
[PATCH] I2C: lsb in emc6d102 and adm1027
The attached patches add support for reading the lsb from the emc6d102
and change how they are read from the adm1027.
The lm85_update_device function decodes the LSBs to temp_ext and in_ext.
This strategy was suggested by Philip Pokorny.
The patch also changes some macros to use the SCALE macro. I think that
they become more readable this way.
Signed-off-by: Rafael ?vila de Esp?ndola <rafael.espindola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/chips/lm85.c | 100 ++++++++++++++++++++++++++++++++++++-----------
1 files changed, 77 insertions(+), 23 deletions(-)
diff -Nru a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c
--- a/drivers/i2c/chips/lm85.c 2005-03-31 15:16:46 -08:00
+++ b/drivers/i2c/chips/lm85.c 2005-03-31 15:16:46 -08:00
@@ -37,7 +37,7 @@
static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_5(lm85b, lm85c, adm1027, adt7463, emc6d100);
+SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
/* The LM85 registers */
@@ -77,6 +77,7 @@
#define LM85_VERSTEP_ADT7463C 0x6A
#define LM85_VERSTEP_EMC6D100_A0 0x60
#define LM85_VERSTEP_EMC6D100_A1 0x61
+#define LM85_VERSTEP_EMC6D102 0x65
#define LM85_REG_CONFIG 0x40
@@ -113,9 +114,13 @@
#define EMC6D100_REG_ALARM3 0x7d
/* IN5, IN6 and IN7 */
-#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5))
-#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2)
-#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2)
+#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5))
+#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2)
+#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2)
+#define EMC6D102_REG_EXTEND_ADC1 0x85
+#define EMC6D102_REG_EXTEND_ADC2 0x86
+#define EMC6D102_REG_EXTEND_ADC3 0x87
+#define EMC6D102_REG_EXTEND_ADC4 0x88
#define LM85_ALARM_IN0 0x0001
#define LM85_ALARM_IN1 0x0002
@@ -140,35 +145,36 @@
these macros are called: arguments may be evaluated more than once.
*/
-/* IN are scaled 1.000 = 0xc0, mag = 3 */
-#define IN_TO_REG(val) (SENSORS_LIMIT((((val)*0xc0+500)/1000),0,255))
-#define INEXT_FROM_REG(val,ext) (((val)*1000 + (ext)*250 + 96)/0xc0)
-#define IN_FROM_REG(val) (INEXT_FROM_REG(val,0))
-
/* IN are scaled acording to built-in resistors */
static int lm85_scaling[] = { /* .001 Volts */
2500, 2250, 3300, 5000, 12000,
3300, 1500, 1800 /*EMC6D100*/
};
#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from))
-#define INS_TO_REG(n,val) (SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255))
-#define INSEXT_FROM_REG(n,val,ext) (SCALE((val)*4 + (ext),192*4,lm85_scaling[n]))
-#define INS_FROM_REG(n,val) (INSEXT_FROM_REG(n,val,0))
+
+#define INS_TO_REG(n,val) \
+ SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+
+#define INSEXT_FROM_REG(n,val,ext,scale) \
+ SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n])
+
+#define INS_FROM_REG(n,val) INSEXT_FROM_REG(n,val,0,1)
/* FAN speed is measured using 90kHz clock */
#define FAN_TO_REG(val) (SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
#define FAN_FROM_REG(val) ((val)=0?-1:(val)=0xffff?0:5400000/(val))
/* Temperature is reported in .001 degC increments */
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,-127,127))
-#define TEMPEXT_FROM_REG(val,ext) ((val)*1000 + (ext)*250)
-#define TEMP_FROM_REG(val) (TEMPEXT_FROM_REG(val,0))
-#define EXTTEMP_TO_REG(val) (SENSORS_LIMIT((val)/250,-127,127))
+#define TEMP_TO_REG(val) \
+ SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
+#define TEMPEXT_FROM_REG(val,ext,scale) \
+ SCALE((val)*scale + (ext),scale,1000)
+#define TEMP_FROM_REG(val) \
+ TEMPEXT_FROM_REG(val,0,1)
#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
#define PWM_FROM_REG(val) (val)
-#define EXT_FROM_REG(val,sensor) (((val)>>(sensor * 2))&0x03)
/* ZONEs have the following parameters:
* Limit (low) temp, 1. degC
@@ -356,7 +362,9 @@
u8 pwm[3]; /* Register value */
u8 spinup_ctl; /* Register encoding, combined */
u8 tach_mode; /* Register encoding, combined */
- u16 extend_adc; /* Register value */
+ u8 temp_ext[3]; /* Decoded values */
+ u8 in_ext[8]; /* Decoded values */
+ u8 adc_scale; /* ADC Extended bits scaling factor */
u8 fan_ppr; /* Register value */
u8 smooth[3]; /* Register encoding */
u8 vid; /* Register value */
@@ -537,7 +545,10 @@
static ssize_t show_in(struct device *dev, char *buf, int nr)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr]) );
+ return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr,
+ data->in[nr],
+ data->in_ext[nr],
+ data->adc_scale) );
}
static ssize_t show_in_min(struct device *dev, char *buf, int nr)
{
@@ -618,7 +629,9 @@
static ssize_t show_temp(struct device *dev, char *buf, int nr)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr]) );
+ return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+ data->temp_ext[nr],
+ data->adc_scale) );
}
static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
{
@@ -1109,6 +1122,9 @@
*/
kind = emc6d100 ;
} else if( company = LM85_COMPANY_SMSC
+ && verstep = LM85_VERSTEP_EMC6D102) {
+ kind = emc6d102 ;
+ } else if( company = LM85_COMPANY_SMSC
&& (verstep & LM85_VERSTEP_VMASK) = LM85_VERSTEP_GENERIC) {
dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
@@ -1144,6 +1160,8 @@
type_name = "adt7463";
} else if ( kind = emc6d100){
type_name = "emc6d100";
+ } else if ( kind = emc6d102 ) {
+ type_name = "emc6d102";
}
strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
@@ -1261,7 +1279,6 @@
case LM85_REG_FAN_MIN(2) :
case LM85_REG_FAN_MIN(3) :
case LM85_REG_ALARM1 : /* Read both bytes at once */
- case ADM1027_REG_EXTEND_ADC1 : /* Read two bytes at once */
res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
break ;
@@ -1365,10 +1382,25 @@
* more significant bits that are read later.
*/
if ( (data->type = adm1027) || (data->type = adt7463) ) {
- data->extend_adc - lm85_read_value(client, ADM1027_REG_EXTEND_ADC1);
+ int ext1 = lm85_read_value(client,
+ ADM1027_REG_EXTEND_ADC1);
+ int ext2 = lm85_read_value(client,
+ ADM1027_REG_EXTEND_ADC2);
+ int val = (ext1 << 8) + ext2;
+
+ for(i = 0; i <= 4; i++)
+ data->in_ext[i] = (val>>(i * 2))&0x03;
+
+ for(i = 0; i <= 2; i++)
+ data->temp_ext[i] = (val>>((i + 5) * 2))&0x03;
}
+ /* adc_scale is 2^(number of LSBs). There are 4 extra bits in
+ the emc6d102 and 2 in the adt7463 and adm1027. In all
+ other chips ext is always 0 and the value of scale is
+ irrelevant. So it is left in 4*/
+ data->adc_scale = (data->type = emc6d102 ) ? 16 : 4;
+
for (i = 0; i <= 4; ++i) {
data->in[i] lm85_read_value(client, LM85_REG_IN(i));
@@ -1405,6 +1437,28 @@
/* More alarm bits */
data->alarms | lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
+ } else if (data->type = emc6d102 ) {
+ /* Have to read LSB bits after the MSB ones because
+ the reading of the MSB bits has frozen the
+ LSBs (backward from the ADM1027).
+ */
+ int ext1 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC1);
+ int ext2 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC2);
+ int ext3 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC3);
+ int ext4 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC4);
+ data->in_ext[0] = ext3 & 0x0f;
+ data->in_ext[1] = ext4 & 0x0f;
+ data->in_ext[2] = (ext4 >> 4) & 0x0f;
+ data->in_ext[3] = (ext3 >> 4) & 0x0f;
+ data->in_ext[4] = (ext2 >> 4) & 0x0f;
+
+ data->temp_ext[0] = ext1 & 0x0f;
+ data->temp_ext[1] = ext2 & 0x0f;
+ data->temp_ext[2] = (ext1 >> 4) & 0x0f;
}
data->last_reading = jiffies ;
WARNING: multiple messages have this Message-ID (diff)
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, sensors@Stimpy.netroedge.com
Cc: rafael.espindola@gmail.com
Subject: [PATCH] I2C: lsb in emc6d102 and adm1027
Date: Thu, 31 Mar 2005 15:23:14 -0800 [thread overview]
Message-ID: <11123113943693@kroah.com> (raw)
In-Reply-To: <1112311394943@kroah.com>
ChangeSet 1.2343, 2005/03/31 14:30:43-08:00, rafael.espindola@gmail.com
[PATCH] I2C: lsb in emc6d102 and adm1027
The attached patches add support for reading the lsb from the emc6d102
and change how they are read from the adm1027.
The lm85_update_device function decodes the LSBs to temp_ext and in_ext.
This strategy was suggested by Philip Pokorny.
The patch also changes some macros to use the SCALE macro. I think that
they become more readable this way.
Signed-off-by: Rafael Ávila de Espíndola <rafael.espindola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/chips/lm85.c | 100 ++++++++++++++++++++++++++++++++++++-----------
1 files changed, 77 insertions(+), 23 deletions(-)
diff -Nru a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c
--- a/drivers/i2c/chips/lm85.c 2005-03-31 15:16:46 -08:00
+++ b/drivers/i2c/chips/lm85.c 2005-03-31 15:16:46 -08:00
@@ -37,7 +37,7 @@
static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_5(lm85b, lm85c, adm1027, adt7463, emc6d100);
+SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
/* The LM85 registers */
@@ -77,6 +77,7 @@
#define LM85_VERSTEP_ADT7463C 0x6A
#define LM85_VERSTEP_EMC6D100_A0 0x60
#define LM85_VERSTEP_EMC6D100_A1 0x61
+#define LM85_VERSTEP_EMC6D102 0x65
#define LM85_REG_CONFIG 0x40
@@ -113,9 +114,13 @@
#define EMC6D100_REG_ALARM3 0x7d
/* IN5, IN6 and IN7 */
-#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5))
-#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2)
-#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2)
+#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5))
+#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2)
+#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2)
+#define EMC6D102_REG_EXTEND_ADC1 0x85
+#define EMC6D102_REG_EXTEND_ADC2 0x86
+#define EMC6D102_REG_EXTEND_ADC3 0x87
+#define EMC6D102_REG_EXTEND_ADC4 0x88
#define LM85_ALARM_IN0 0x0001
#define LM85_ALARM_IN1 0x0002
@@ -140,35 +145,36 @@
these macros are called: arguments may be evaluated more than once.
*/
-/* IN are scaled 1.000 == 0xc0, mag = 3 */
-#define IN_TO_REG(val) (SENSORS_LIMIT((((val)*0xc0+500)/1000),0,255))
-#define INEXT_FROM_REG(val,ext) (((val)*1000 + (ext)*250 + 96)/0xc0)
-#define IN_FROM_REG(val) (INEXT_FROM_REG(val,0))
-
/* IN are scaled acording to built-in resistors */
static int lm85_scaling[] = { /* .001 Volts */
2500, 2250, 3300, 5000, 12000,
3300, 1500, 1800 /*EMC6D100*/
};
#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from))
-#define INS_TO_REG(n,val) (SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255))
-#define INSEXT_FROM_REG(n,val,ext) (SCALE((val)*4 + (ext),192*4,lm85_scaling[n]))
-#define INS_FROM_REG(n,val) (INSEXT_FROM_REG(n,val,0))
+
+#define INS_TO_REG(n,val) \
+ SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+
+#define INSEXT_FROM_REG(n,val,ext,scale) \
+ SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n])
+
+#define INS_FROM_REG(n,val) INSEXT_FROM_REG(n,val,0,1)
/* FAN speed is measured using 90kHz clock */
#define FAN_TO_REG(val) (SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val))
/* Temperature is reported in .001 degC increments */
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,-127,127))
-#define TEMPEXT_FROM_REG(val,ext) ((val)*1000 + (ext)*250)
-#define TEMP_FROM_REG(val) (TEMPEXT_FROM_REG(val,0))
-#define EXTTEMP_TO_REG(val) (SENSORS_LIMIT((val)/250,-127,127))
+#define TEMP_TO_REG(val) \
+ SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
+#define TEMPEXT_FROM_REG(val,ext,scale) \
+ SCALE((val)*scale + (ext),scale,1000)
+#define TEMP_FROM_REG(val) \
+ TEMPEXT_FROM_REG(val,0,1)
#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
#define PWM_FROM_REG(val) (val)
-#define EXT_FROM_REG(val,sensor) (((val)>>(sensor * 2))&0x03)
/* ZONEs have the following parameters:
* Limit (low) temp, 1. degC
@@ -356,7 +362,9 @@
u8 pwm[3]; /* Register value */
u8 spinup_ctl; /* Register encoding, combined */
u8 tach_mode; /* Register encoding, combined */
- u16 extend_adc; /* Register value */
+ u8 temp_ext[3]; /* Decoded values */
+ u8 in_ext[8]; /* Decoded values */
+ u8 adc_scale; /* ADC Extended bits scaling factor */
u8 fan_ppr; /* Register value */
u8 smooth[3]; /* Register encoding */
u8 vid; /* Register value */
@@ -537,7 +545,10 @@
static ssize_t show_in(struct device *dev, char *buf, int nr)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr]) );
+ return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr,
+ data->in[nr],
+ data->in_ext[nr],
+ data->adc_scale) );
}
static ssize_t show_in_min(struct device *dev, char *buf, int nr)
{
@@ -618,7 +629,9 @@
static ssize_t show_temp(struct device *dev, char *buf, int nr)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr]) );
+ return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+ data->temp_ext[nr],
+ data->adc_scale) );
}
static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
{
@@ -1109,6 +1122,9 @@
*/
kind = emc6d100 ;
} else if( company == LM85_COMPANY_SMSC
+ && verstep == LM85_VERSTEP_EMC6D102) {
+ kind = emc6d102 ;
+ } else if( company == LM85_COMPANY_SMSC
&& (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
@@ -1144,6 +1160,8 @@
type_name = "adt7463";
} else if ( kind == emc6d100){
type_name = "emc6d100";
+ } else if ( kind == emc6d102 ) {
+ type_name = "emc6d102";
}
strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
@@ -1261,7 +1279,6 @@
case LM85_REG_FAN_MIN(2) :
case LM85_REG_FAN_MIN(3) :
case LM85_REG_ALARM1 : /* Read both bytes at once */
- case ADM1027_REG_EXTEND_ADC1 : /* Read two bytes at once */
res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
break ;
@@ -1365,10 +1382,25 @@
* more significant bits that are read later.
*/
if ( (data->type == adm1027) || (data->type == adt7463) ) {
- data->extend_adc =
- lm85_read_value(client, ADM1027_REG_EXTEND_ADC1);
+ int ext1 = lm85_read_value(client,
+ ADM1027_REG_EXTEND_ADC1);
+ int ext2 = lm85_read_value(client,
+ ADM1027_REG_EXTEND_ADC2);
+ int val = (ext1 << 8) + ext2;
+
+ for(i = 0; i <= 4; i++)
+ data->in_ext[i] = (val>>(i * 2))&0x03;
+
+ for(i = 0; i <= 2; i++)
+ data->temp_ext[i] = (val>>((i + 5) * 2))&0x03;
}
+ /* adc_scale is 2^(number of LSBs). There are 4 extra bits in
+ the emc6d102 and 2 in the adt7463 and adm1027. In all
+ other chips ext is always 0 and the value of scale is
+ irrelevant. So it is left in 4*/
+ data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
+
for (i = 0; i <= 4; ++i) {
data->in[i] =
lm85_read_value(client, LM85_REG_IN(i));
@@ -1405,6 +1437,28 @@
/* More alarm bits */
data->alarms |=
lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
+ } else if (data->type == emc6d102 ) {
+ /* Have to read LSB bits after the MSB ones because
+ the reading of the MSB bits has frozen the
+ LSBs (backward from the ADM1027).
+ */
+ int ext1 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC1);
+ int ext2 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC2);
+ int ext3 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC3);
+ int ext4 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC4);
+ data->in_ext[0] = ext3 & 0x0f;
+ data->in_ext[1] = ext4 & 0x0f;
+ data->in_ext[2] = (ext4 >> 4) & 0x0f;
+ data->in_ext[3] = (ext3 >> 4) & 0x0f;
+ data->in_ext[4] = (ext2 >> 4) & 0x0f;
+
+ data->temp_ext[0] = ext1 & 0x0f;
+ data->temp_ext[1] = ext2 & 0x0f;
+ data->temp_ext[2] = (ext1 >> 4) & 0x0f;
}
data->last_reading = jiffies ;
next prev parent reply other threads:[~2005-05-19 6:25 UTC|newest]
Thread overview: 158+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-31 23:22 [BK PATCH] I2C patches for 2.6.12-rc1 Greg KH
2005-03-31 23:23 ` [PATCH] i2c/i2c-ite: remove interruptible_sleep_on_timeout() usage Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c/i2c-elektor: " Greg KH
2005-05-19 6:25 ` [PATCH] i2c/i2c-elektor: remove interruptible_sleep_on_timeout() Greg KH
2005-03-31 23:23 ` [PATCH] I2C: New lm92 chip driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Cleanup adm1021 unused defines Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix adm1021 alarms mask Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Kill unused struct members in w83627hf driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Make master_xfer debug messages more useful Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Skip broken detection step in it87 Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: group Intel on I2C Hardware Bus support Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c: new driver for ds1337 RTC Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c: add adt7461 chip support to lm90 driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Clean up of i2c-elektor.c build Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix breakage in m41t00 i2c rtc driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix some i2c algorithm initialization Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Kill outdated defines in i2c.h Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Avoid repeated resets of i2c-viapro Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Recognize new revision of the ADT7463 chip Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix Vaio EEPROM detection Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: busses documentation update 1 of 2 Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: busses documentation update 2 " Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: lost arbitration detection for PCF8584 Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` Greg KH [this message]
2005-05-19 6:25 ` [PATCH] I2C: lsb in emc6d102 and adm1027 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Delete useless instruction in it87 Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix race condition in it87 driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: i2c-s3c2410 functionality and fixes Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c: add adt7461 chip support to lm90 driver's Kconfig entry Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix broken force parameter handling Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix indentation of lm87 driver Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Drop useless w83781d RT feature Greg KH
2005-05-19 6:25 ` Greg KH
2005-03-31 23:23 ` [PATCH] i2c: i2c-mv64xxx - set adapter owner and class fields Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-07 9:45 ` [PATCH] i2c: new driver for ds1337 RTC Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 9:59 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-07 11:16 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 13:07 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-07 14:28 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 21:18 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-07 23:17 ` [PATCH] ds1337 1/4 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 23:36 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-08 13:00 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 16:31 ` James Chapman
2005-05-19 6:25 ` James Chapman
2005-05-02 20:41 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-08 8:49 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-07 23:18 ` [PATCH] ds1337 2/4 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 8:51 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-08 13:02 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-02 20:41 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-04-07 23:18 ` [PATCH] ds1337 3/4 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 10:08 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-08 13:06 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-02 20:41 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-05-04 6:13 ` [PATCH] ds1337 1/3 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-04 8:41 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-04 6:13 ` [PATCH] ds1337 2/3 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-04 9:44 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-04 6:14 ` [PATCH] ds1337 3/3 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-04 10:07 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-10 12:08 ` [PATCH] ds1337 driver works also with ds1339 chip Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-10 12:40 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-10 12:48 ` Russell King
2005-05-19 6:25 ` Russell King
[not found] ` <1DTwF8-18P-00@press.kroah.org>
[not found] ` <20050508204021.627f9cd1.khali@linux-fr.org>
[not found] ` <427E6E21.60001@katalix.com>
[not found] ` <20050508222351.08bfe2e1.khali@linux-fr.org>
2005-05-10 12:18 ` [PATCH] ds1337: export ds1337_do_command Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-10 12:51 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-10 17:55 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-05-10 18:36 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-10 20:30 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-05-11 8:32 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-07 23:19 ` [PATCH] ds1337 4/4 Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 11:08 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-08 12:35 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-08 16:21 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-08 17:44 ` James Chapman
2005-05-19 6:25 ` James Chapman
2005-04-10 19:51 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-10 21:10 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-12 18:10 ` James Chapman
2005-05-19 6:25 ` James Chapman
2005-04-13 11:04 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-04-13 19:02 ` James Chapman
2005-05-19 6:25 ` James Chapman
2005-04-13 19:48 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
2005-05-19 6:25 ` Jean Delvare
2005-04-07 21:29 ` [PATCH] i2c: new driver for ds1337 RTC Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-04-07 23:16 ` Ladislav Michl
2005-05-19 6:25 ` Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11123113943693@kroah.com \
--to=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rafael.espindola@gmail.com \
--cc=sensors@Stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.