All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: Samuel Holland <samuel@sholland.org>,
	palmer@dabbelt.com, Conor Dooley <conor@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	linux-sunxi@lists.linux.dev, Palmer Dabbelt <palmer@dabbelt.com>,
	linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Jisheng Zhang <jszhang@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Andre Przywara <andre.przywara@arm.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Anup Patel <apatel@ventanamicro.com>,
	Atish Patra <atishp@rivosinc.com>,
	Christian Hewitt <christianshewitt@gmail.com>,
	Conor Dooley <conor.dooley@microchip.com>,
	Guo Ren <guoren@kernel.org>,
	Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Stanislav Jakubek <stano.jakubek@gmail.com>
Subject: Re: [PATCH v2 12/12] riscv: defconfig: Enable the Allwinner D1 platform and drivers
Date: Mon, 28 Nov 2022 22:11:18 +0100	[thread overview]
Message-ID: <11740765.nUPlyArG6x@diego> (raw)
In-Reply-To: <Y4JBa52o4Yemv/uj@spud>

Am Samstag, 26. November 2022, 17:40:11 CET schrieb Conor Dooley:
> On Fri, Nov 25, 2022 at 05:46:56PM -0600, Samuel Holland wrote:
> > Now that several D1-based boards are supported, enable the platform in
> > our defconfig. Build in the drivers which are necessary to boot, such as
> > the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
> > and watchdog (which may be left enabled by the bootloader).
> 
> All of that looks good.
> 
> > Other common
> > onboard peripherals are enabled as modules.
> 
> This I am not sure about though. I'll leave that to Palmer since I'm
> pretty sure it was him that said it, but I thought the plan was only
> turning on stuff required to boot to a console & things that are
> generally useful rather than enabling modules for everyone's "random"
> drivers. Palmer?

Isn't the defconfig meant as a starting point to get working systems
with minimal config effort? At least that was always the way to go on arm
so far :-) .

So having boot-required drivers built-in with the rest enabled as modules
for supported boards will allow people to boot theirs without headaches.

Disabling unneeded drivers if you're starved for storage space in a special
project is always easier than hunting down all the drivers to enable for a
specific board. 


Heiko


> > Signed-off-by: Samuel Holland <samuel@sholland.org>
> > ---
> > 
> > (no changes since v1)
> > 
> >  arch/riscv/configs/defconfig | 23 ++++++++++++++++++++++-
> >  1 file changed, 22 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> > index 05fd5fcf24f9..8dfe0550c0e6 100644
> > --- a/arch/riscv/configs/defconfig
> > +++ b/arch/riscv/configs/defconfig
> > @@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y
> >  CONFIG_EXPERT=y
> >  # CONFIG_SYSFS_SYSCALL is not set
> >  CONFIG_PROFILING=y
> > +CONFIG_ARCH_SUNXI=y
> >  CONFIG_SOC_MICROCHIP_POLARFIRE=y
> >  CONFIG_SOC_SIFIVE=y
> >  CONFIG_SOC_STARFIVE=y
> > @@ -118,22 +119,31 @@ CONFIG_VIRTIO_NET=y
> >  CONFIG_MACB=y
> >  CONFIG_E1000E=y
> >  CONFIG_R8169=y
> > +CONFIG_STMMAC_ETH=m
> >  CONFIG_MICROSEMI_PHY=y
> >  CONFIG_INPUT_MOUSEDEV=y
> > +CONFIG_KEYBOARD_SUN4I_LRADC=m
> >  CONFIG_SERIAL_8250=y
> >  CONFIG_SERIAL_8250_CONSOLE=y
> > +CONFIG_SERIAL_8250_DW=y
> >  CONFIG_SERIAL_OF_PLATFORM=y
> >  CONFIG_VIRTIO_CONSOLE=y
> >  CONFIG_HW_RANDOM=y
> >  CONFIG_HW_RANDOM_VIRTIO=y
> > +CONFIG_I2C_MV64XXX=m
> >  CONFIG_SPI=y
> >  CONFIG_SPI_SIFIVE=y
> > +CONFIG_SPI_SUN6I=y
> >  # CONFIG_PTP_1588_CLOCK is not set
> > -CONFIG_GPIOLIB=y
> >  CONFIG_GPIO_SIFIVE=y
> > +CONFIG_WATCHDOG=y
> > +CONFIG_SUNXI_WATCHDOG=y
> > +CONFIG_REGULATOR=y
> > +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> >  CONFIG_DRM=m
> >  CONFIG_DRM_RADEON=m
> >  CONFIG_DRM_NOUVEAU=m
> > +CONFIG_DRM_SUN4I=m
> >  CONFIG_DRM_VIRTIO_GPU=m
> >  CONFIG_FB=y
> >  CONFIG_FRAMEBUFFER_CONSOLE=y
> > @@ -146,19 +156,30 @@ CONFIG_USB_OHCI_HCD=y
> >  CONFIG_USB_OHCI_HCD_PLATFORM=y
> >  CONFIG_USB_STORAGE=y
> >  CONFIG_USB_UAS=y
> > +CONFIG_USB_MUSB_HDRC=m
> > +CONFIG_USB_MUSB_SUNXI=m
> > +CONFIG_NOP_USB_XCEIV=m
> >  CONFIG_MMC=y
> >  CONFIG_MMC_SDHCI=y
> >  CONFIG_MMC_SDHCI_PLTFM=y
> >  CONFIG_MMC_SDHCI_CADENCE=y
> >  CONFIG_MMC_SPI=y
> > +CONFIG_MMC_SUNXI=y
> >  CONFIG_RTC_CLASS=y
> > +CONFIG_RTC_DRV_SUN6I=y
> > +CONFIG_DMADEVICES=y
> > +CONFIG_DMA_SUN6I=m
> >  CONFIG_VIRTIO_PCI=y
> >  CONFIG_VIRTIO_BALLOON=y
> >  CONFIG_VIRTIO_INPUT=y
> >  CONFIG_VIRTIO_MMIO=y
> > +CONFIG_SUN8I_DE2_CCU=m
> > +CONFIG_SUN50I_IOMMU=y
> >  CONFIG_RPMSG_CHAR=y
> >  CONFIG_RPMSG_CTRL=y
> >  CONFIG_RPMSG_VIRTIO=y
> > +CONFIG_PHY_SUN4I_USB=m
> > +CONFIG_NVMEM_SUNXI_SID=y
> >  CONFIG_EXT4_FS=y
> >  CONFIG_EXT4_FS_POSIX_ACL=y
> >  CONFIG_EXT4_FS_SECURITY=y
> 





_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Samuel Holland <samuel@sholland.org>,
	palmer@dabbelt.com, Conor Dooley <conor@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	linux-sunxi@lists.linux.dev, Palmer Dabbelt <palmer@dabbelt.com>,
	linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Jisheng Zhang <jszhang@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Andre Przywara <andre.przywara@arm.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Anup Patel <apatel@ventanamicro.com>,
	Atish Patra <atishp@rivosinc.com>,
	Christian Hewitt <christianshewitt@gmail.com>,
	Conor Dooley <conor.dooley@microchip.com>,
	Guo Ren <guoren@kernel.org>,
	Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Stanislav Jakubek <stano.jakubek@gmail.com>
Subject: Re: [PATCH v2 12/12] riscv: defconfig: Enable the Allwinner D1 platform and drivers
Date: Mon, 28 Nov 2022 22:11:18 +0100	[thread overview]
Message-ID: <11740765.nUPlyArG6x@diego> (raw)
In-Reply-To: <Y4JBa52o4Yemv/uj@spud>

Am Samstag, 26. November 2022, 17:40:11 CET schrieb Conor Dooley:
> On Fri, Nov 25, 2022 at 05:46:56PM -0600, Samuel Holland wrote:
> > Now that several D1-based boards are supported, enable the platform in
> > our defconfig. Build in the drivers which are necessary to boot, such as
> > the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
> > and watchdog (which may be left enabled by the bootloader).
> 
> All of that looks good.
> 
> > Other common
> > onboard peripherals are enabled as modules.
> 
> This I am not sure about though. I'll leave that to Palmer since I'm
> pretty sure it was him that said it, but I thought the plan was only
> turning on stuff required to boot to a console & things that are
> generally useful rather than enabling modules for everyone's "random"
> drivers. Palmer?

Isn't the defconfig meant as a starting point to get working systems
with minimal config effort? At least that was always the way to go on arm
so far :-) .

So having boot-required drivers built-in with the rest enabled as modules
for supported boards will allow people to boot theirs without headaches.

Disabling unneeded drivers if you're starved for storage space in a special
project is always easier than hunting down all the drivers to enable for a
specific board. 


Heiko


> > Signed-off-by: Samuel Holland <samuel@sholland.org>
> > ---
> > 
> > (no changes since v1)
> > 
> >  arch/riscv/configs/defconfig | 23 ++++++++++++++++++++++-
> >  1 file changed, 22 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> > index 05fd5fcf24f9..8dfe0550c0e6 100644
> > --- a/arch/riscv/configs/defconfig
> > +++ b/arch/riscv/configs/defconfig
> > @@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y
> >  CONFIG_EXPERT=y
> >  # CONFIG_SYSFS_SYSCALL is not set
> >  CONFIG_PROFILING=y
> > +CONFIG_ARCH_SUNXI=y
> >  CONFIG_SOC_MICROCHIP_POLARFIRE=y
> >  CONFIG_SOC_SIFIVE=y
> >  CONFIG_SOC_STARFIVE=y
> > @@ -118,22 +119,31 @@ CONFIG_VIRTIO_NET=y
> >  CONFIG_MACB=y
> >  CONFIG_E1000E=y
> >  CONFIG_R8169=y
> > +CONFIG_STMMAC_ETH=m
> >  CONFIG_MICROSEMI_PHY=y
> >  CONFIG_INPUT_MOUSEDEV=y
> > +CONFIG_KEYBOARD_SUN4I_LRADC=m
> >  CONFIG_SERIAL_8250=y
> >  CONFIG_SERIAL_8250_CONSOLE=y
> > +CONFIG_SERIAL_8250_DW=y
> >  CONFIG_SERIAL_OF_PLATFORM=y
> >  CONFIG_VIRTIO_CONSOLE=y
> >  CONFIG_HW_RANDOM=y
> >  CONFIG_HW_RANDOM_VIRTIO=y
> > +CONFIG_I2C_MV64XXX=m
> >  CONFIG_SPI=y
> >  CONFIG_SPI_SIFIVE=y
> > +CONFIG_SPI_SUN6I=y
> >  # CONFIG_PTP_1588_CLOCK is not set
> > -CONFIG_GPIOLIB=y
> >  CONFIG_GPIO_SIFIVE=y
> > +CONFIG_WATCHDOG=y
> > +CONFIG_SUNXI_WATCHDOG=y
> > +CONFIG_REGULATOR=y
> > +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> >  CONFIG_DRM=m
> >  CONFIG_DRM_RADEON=m
> >  CONFIG_DRM_NOUVEAU=m
> > +CONFIG_DRM_SUN4I=m
> >  CONFIG_DRM_VIRTIO_GPU=m
> >  CONFIG_FB=y
> >  CONFIG_FRAMEBUFFER_CONSOLE=y
> > @@ -146,19 +156,30 @@ CONFIG_USB_OHCI_HCD=y
> >  CONFIG_USB_OHCI_HCD_PLATFORM=y
> >  CONFIG_USB_STORAGE=y
> >  CONFIG_USB_UAS=y
> > +CONFIG_USB_MUSB_HDRC=m
> > +CONFIG_USB_MUSB_SUNXI=m
> > +CONFIG_NOP_USB_XCEIV=m
> >  CONFIG_MMC=y
> >  CONFIG_MMC_SDHCI=y
> >  CONFIG_MMC_SDHCI_PLTFM=y
> >  CONFIG_MMC_SDHCI_CADENCE=y
> >  CONFIG_MMC_SPI=y
> > +CONFIG_MMC_SUNXI=y
> >  CONFIG_RTC_CLASS=y
> > +CONFIG_RTC_DRV_SUN6I=y
> > +CONFIG_DMADEVICES=y
> > +CONFIG_DMA_SUN6I=m
> >  CONFIG_VIRTIO_PCI=y
> >  CONFIG_VIRTIO_BALLOON=y
> >  CONFIG_VIRTIO_INPUT=y
> >  CONFIG_VIRTIO_MMIO=y
> > +CONFIG_SUN8I_DE2_CCU=m
> > +CONFIG_SUN50I_IOMMU=y
> >  CONFIG_RPMSG_CHAR=y
> >  CONFIG_RPMSG_CTRL=y
> >  CONFIG_RPMSG_VIRTIO=y
> > +CONFIG_PHY_SUN4I_USB=m
> > +CONFIG_NVMEM_SUNXI_SID=y
> >  CONFIG_EXT4_FS=y
> >  CONFIG_EXT4_FS_POSIX_ACL=y
> >  CONFIG_EXT4_FS_SECURITY=y
> 





WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Samuel Holland <samuel@sholland.org>,
	palmer@dabbelt.com, Conor Dooley <conor@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	linux-sunxi@lists.linux.dev, Palmer Dabbelt <palmer@dabbelt.com>,
	linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Jisheng Zhang <jszhang@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Andre Przywara <andre.przywara@arm.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Anup Patel <apatel@ventanamicro.com>,
	Atish Patra <atishp@rivosinc.com>,
	Christian Hewitt <christianshewitt@gmail.com>,
	Conor Dooley <conor.dooley@microchip.com>,
	Guo Ren <guoren@kernel.org>,
	Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Stanislav Jakubek <stano.jakubek@gmail.com>
Subject: Re: [PATCH v2 12/12] riscv: defconfig: Enable the Allwinner D1 platform and drivers
Date: Mon, 28 Nov 2022 22:11:18 +0100	[thread overview]
Message-ID: <11740765.nUPlyArG6x@diego> (raw)
In-Reply-To: <Y4JBa52o4Yemv/uj@spud>

Am Samstag, 26. November 2022, 17:40:11 CET schrieb Conor Dooley:
> On Fri, Nov 25, 2022 at 05:46:56PM -0600, Samuel Holland wrote:
> > Now that several D1-based boards are supported, enable the platform in
> > our defconfig. Build in the drivers which are necessary to boot, such as
> > the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
> > and watchdog (which may be left enabled by the bootloader).
> 
> All of that looks good.
> 
> > Other common
> > onboard peripherals are enabled as modules.
> 
> This I am not sure about though. I'll leave that to Palmer since I'm
> pretty sure it was him that said it, but I thought the plan was only
> turning on stuff required to boot to a console & things that are
> generally useful rather than enabling modules for everyone's "random"
> drivers. Palmer?

Isn't the defconfig meant as a starting point to get working systems
with minimal config effort? At least that was always the way to go on arm
so far :-) .

So having boot-required drivers built-in with the rest enabled as modules
for supported boards will allow people to boot theirs without headaches.

Disabling unneeded drivers if you're starved for storage space in a special
project is always easier than hunting down all the drivers to enable for a
specific board. 


Heiko


> > Signed-off-by: Samuel Holland <samuel@sholland.org>
> > ---
> > 
> > (no changes since v1)
> > 
> >  arch/riscv/configs/defconfig | 23 ++++++++++++++++++++++-
> >  1 file changed, 22 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> > index 05fd5fcf24f9..8dfe0550c0e6 100644
> > --- a/arch/riscv/configs/defconfig
> > +++ b/arch/riscv/configs/defconfig
> > @@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y
> >  CONFIG_EXPERT=y
> >  # CONFIG_SYSFS_SYSCALL is not set
> >  CONFIG_PROFILING=y
> > +CONFIG_ARCH_SUNXI=y
> >  CONFIG_SOC_MICROCHIP_POLARFIRE=y
> >  CONFIG_SOC_SIFIVE=y
> >  CONFIG_SOC_STARFIVE=y
> > @@ -118,22 +119,31 @@ CONFIG_VIRTIO_NET=y
> >  CONFIG_MACB=y
> >  CONFIG_E1000E=y
> >  CONFIG_R8169=y
> > +CONFIG_STMMAC_ETH=m
> >  CONFIG_MICROSEMI_PHY=y
> >  CONFIG_INPUT_MOUSEDEV=y
> > +CONFIG_KEYBOARD_SUN4I_LRADC=m
> >  CONFIG_SERIAL_8250=y
> >  CONFIG_SERIAL_8250_CONSOLE=y
> > +CONFIG_SERIAL_8250_DW=y
> >  CONFIG_SERIAL_OF_PLATFORM=y
> >  CONFIG_VIRTIO_CONSOLE=y
> >  CONFIG_HW_RANDOM=y
> >  CONFIG_HW_RANDOM_VIRTIO=y
> > +CONFIG_I2C_MV64XXX=m
> >  CONFIG_SPI=y
> >  CONFIG_SPI_SIFIVE=y
> > +CONFIG_SPI_SUN6I=y
> >  # CONFIG_PTP_1588_CLOCK is not set
> > -CONFIG_GPIOLIB=y
> >  CONFIG_GPIO_SIFIVE=y
> > +CONFIG_WATCHDOG=y
> > +CONFIG_SUNXI_WATCHDOG=y
> > +CONFIG_REGULATOR=y
> > +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> >  CONFIG_DRM=m
> >  CONFIG_DRM_RADEON=m
> >  CONFIG_DRM_NOUVEAU=m
> > +CONFIG_DRM_SUN4I=m
> >  CONFIG_DRM_VIRTIO_GPU=m
> >  CONFIG_FB=y
> >  CONFIG_FRAMEBUFFER_CONSOLE=y
> > @@ -146,19 +156,30 @@ CONFIG_USB_OHCI_HCD=y
> >  CONFIG_USB_OHCI_HCD_PLATFORM=y
> >  CONFIG_USB_STORAGE=y
> >  CONFIG_USB_UAS=y
> > +CONFIG_USB_MUSB_HDRC=m
> > +CONFIG_USB_MUSB_SUNXI=m
> > +CONFIG_NOP_USB_XCEIV=m
> >  CONFIG_MMC=y
> >  CONFIG_MMC_SDHCI=y
> >  CONFIG_MMC_SDHCI_PLTFM=y
> >  CONFIG_MMC_SDHCI_CADENCE=y
> >  CONFIG_MMC_SPI=y
> > +CONFIG_MMC_SUNXI=y
> >  CONFIG_RTC_CLASS=y
> > +CONFIG_RTC_DRV_SUN6I=y
> > +CONFIG_DMADEVICES=y
> > +CONFIG_DMA_SUN6I=m
> >  CONFIG_VIRTIO_PCI=y
> >  CONFIG_VIRTIO_BALLOON=y
> >  CONFIG_VIRTIO_INPUT=y
> >  CONFIG_VIRTIO_MMIO=y
> > +CONFIG_SUN8I_DE2_CCU=m
> > +CONFIG_SUN50I_IOMMU=y
> >  CONFIG_RPMSG_CHAR=y
> >  CONFIG_RPMSG_CTRL=y
> >  CONFIG_RPMSG_VIRTIO=y
> > +CONFIG_PHY_SUN4I_USB=m
> > +CONFIG_NVMEM_SUNXI_SID=y
> >  CONFIG_EXT4_FS=y
> >  CONFIG_EXT4_FS_POSIX_ACL=y
> >  CONFIG_EXT4_FS_SECURITY=y
> 





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-11-28 21:11 UTC|newest]

Thread overview: 164+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-25 23:46 [PATCH v2 00/12] riscv: Allwinner D1/D1s platform support Samuel Holland
2022-11-25 23:46 ` Samuel Holland
2022-11-25 23:46 ` Samuel Holland
2022-11-25 23:46 ` [PATCH v2 01/12] MAINTAINERS: Match the sun20i family of Allwinner SoCs Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:12   ` Guo Ren
2022-11-26  0:12     ` Guo Ren
2022-11-26  0:12     ` Guo Ren
2022-12-05 20:22   ` Jernej Škrabec
2022-12-05 20:22     ` Jernej Škrabec
2022-12-05 20:22     ` Jernej Škrabec
2022-11-25 23:46 ` [PATCH v2 02/12] dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:14   ` Guo Ren
2022-11-26  0:14     ` Guo Ren
2022-11-26  0:14     ` Guo Ren
2022-11-25 23:46 ` [PATCH v2 03/12] dt-bindings: riscv: Add Allwinner D1/D1s board compatibles Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:15   ` Guo Ren
2022-11-26  0:15     ` Guo Ren
2022-11-26  0:15     ` Guo Ren
2022-11-26 15:54   ` Conor Dooley
2022-11-26 15:54     ` Conor Dooley
2022-11-26 15:54     ` Conor Dooley
2022-11-28 20:55   ` Heiko Stübner
2022-11-28 20:55     ` Heiko Stübner
2022-11-28 20:55     ` Heiko Stübner
2022-11-25 23:46 ` [PATCH v2 04/12] riscv: dts: allwinner: Add the D1/D1s SoC devicetree Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26 16:03   ` Conor Dooley
2022-11-26 16:03     ` Conor Dooley
2022-11-26 16:03     ` Conor Dooley
2022-12-02  8:27     ` Icenowy Zheng
2022-12-02  8:27       ` Icenowy Zheng
2022-12-02  8:27       ` Icenowy Zheng
2022-11-27 17:41   ` Andre Przywara
2022-11-27 17:41     ` Andre Przywara
2022-11-27 17:41     ` Andre Przywara
2022-11-27 19:22     ` Samuel Holland
2022-11-27 19:22       ` Samuel Holland
2022-11-27 19:22       ` Samuel Holland
2022-12-05 20:29       ` Jernej Škrabec
2022-12-05 20:29         ` Jernej Škrabec
2022-12-05 20:29         ` Jernej Škrabec
2022-12-02  8:29     ` Icenowy Zheng
2022-12-02  8:29       ` Icenowy Zheng
2022-12-02  8:29       ` Icenowy Zheng
2022-11-28 13:34   ` Bin Meng
2022-11-28 13:34     ` Bin Meng
2022-11-28 13:34     ` Bin Meng
2022-11-28 20:59   ` Heiko Stübner
2022-11-28 20:59     ` Heiko Stübner
2022-11-28 20:59     ` Heiko Stübner
2022-11-25 23:46 ` [PATCH v2 05/12] riscv: dts: allwinner: Add MangoPi MQ devicetree Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:20   ` Guo Ren
2022-11-26  0:20     ` Guo Ren
2022-11-26  0:20     ` Guo Ren
2022-12-05 20:32   ` Jernej Škrabec
2022-12-05 20:32     ` Jernej Škrabec
2022-12-05 20:32     ` Jernej Škrabec
2022-11-25 23:46 ` [PATCH v2 06/12] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:21   ` Guo Ren
2022-11-26  0:21     ` Guo Ren
2022-11-26  0:21     ` Guo Ren
2022-11-26 16:19   ` Conor Dooley
2022-11-26 16:19     ` Conor Dooley
2022-11-26 16:19     ` Conor Dooley
2022-11-28 21:01   ` Heiko Stübner
2022-11-28 21:01     ` Heiko Stübner
2022-11-28 21:01     ` Heiko Stübner
2022-12-05 20:33   ` Jernej Škrabec
2022-12-05 20:33     ` Jernej Škrabec
2022-12-05 20:33     ` Jernej Škrabec
2022-11-25 23:46 ` [PATCH v2 07/12] riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-12-05 20:42   ` Jernej Škrabec
2022-12-05 20:42     ` Jernej Škrabec
2022-12-05 20:42     ` Jernej Škrabec
2022-11-25 23:46 ` [PATCH v2 08/12] riscv: dts: allwinner: Add MangoPi MQ Pro devicetree Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:25   ` Guo Ren
2022-11-26  0:25     ` Guo Ren
2022-11-26  0:25     ` Guo Ren
2022-12-05 20:42   ` Jernej Škrabec
2022-12-05 20:42     ` Jernej Škrabec
2022-12-05 20:42     ` Jernej Škrabec
2022-11-25 23:46 ` [PATCH v2 09/12] riscv: dts: allwinner: Add Dongshan Nezha STU devicetree Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:25   ` Guo Ren
2022-11-26  0:25     ` Guo Ren
2022-11-26  0:25     ` Guo Ren
2022-12-05 20:43   ` Jernej Škrabec
2022-12-05 20:43     ` Jernej Škrabec
2022-12-05 20:43     ` Jernej Škrabec
2022-12-05 20:45   ` Jernej Škrabec
2022-12-05 20:45     ` Jernej Škrabec
2022-12-05 20:45     ` Jernej Škrabec
2022-11-25 23:46 ` [PATCH v2 10/12] riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46 ` [PATCH v2 11/12] riscv: Add the Allwinner SoC family Kconfig option Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:23   ` Guo Ren
2022-11-26  0:23     ` Guo Ren
2022-11-26  0:23     ` Guo Ren
2022-11-26 16:36   ` Conor Dooley
2022-11-26 16:36     ` Conor Dooley
2022-11-26 16:36     ` Conor Dooley
2022-11-27 11:31     ` Guo Ren
2022-11-27 11:31       ` Guo Ren
2022-11-28 21:05       ` Heiko Stübner
2022-11-28 21:05         ` Heiko Stübner
2022-11-28 21:05         ` Heiko Stübner
2022-11-25 23:46 ` [PATCH v2 12/12] riscv: defconfig: Enable the Allwinner D1 platform and drivers Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-25 23:46   ` Samuel Holland
2022-11-26  0:24   ` Guo Ren
2022-11-26  0:24     ` Guo Ren
2022-11-26  0:24     ` Guo Ren
2022-12-02  8:34     ` Icenowy Zheng
2022-12-02  8:34       ` Icenowy Zheng
2022-12-02  8:34       ` Icenowy Zheng
2022-11-26 16:40   ` Conor Dooley
2022-11-26 16:40     ` Conor Dooley
2022-11-26 16:40     ` Conor Dooley
2022-11-28 21:11     ` Heiko Stübner [this message]
2022-11-28 21:11       ` Heiko Stübner
2022-11-28 21:11       ` Heiko Stübner
2022-11-28 21:17       ` Conor Dooley
2022-11-28 21:17         ` Conor Dooley
2022-11-28 21:17         ` Conor Dooley
2022-11-29  6:49         ` Andrew Jones
2022-11-29  6:49           ` Andrew Jones
2022-11-29  6:49           ` Andrew Jones
2022-11-29  6:54           ` Conor Dooley
2022-11-29  6:54             ` Conor Dooley
2022-11-29  6:54             ` Conor Dooley
2022-11-30 20:24             ` Palmer Dabbelt
2022-11-30 20:24               ` Palmer Dabbelt
2022-11-30 20:24               ` Palmer Dabbelt
2022-11-30 21:49               ` Arnd Bergmann
2022-11-30 21:49                 ` Arnd Bergmann
2022-11-30 21:49                 ` Arnd Bergmann
2022-12-01  0:31               ` Andre Przywara
2022-12-01  0:31                 ` Andre Przywara
2022-12-01  0:31                 ` Andre Przywara
2022-11-26 10:24 ` [PATCH v2 00/12] riscv: Allwinner D1/D1s platform support Conor Dooley
2022-11-26 10:24   ` Conor Dooley
2022-11-26 10:24   ` Conor Dooley
2022-12-02 17:55 ` Palmer Dabbelt
2022-12-02 17:55   ` Palmer Dabbelt
2022-12-02 17:55   ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11740765.nUPlyArG6x@diego \
    --to=heiko@sntech.de \
    --cc=andre.przywara@arm.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=apatel@ventanamicro.com \
    --cc=atishp@rivosinc.com \
    --cc=christianshewitt@gmail.com \
    --cc=conor.dooley@microchip.com \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=guoren@kernel.org \
    --cc=heinrich.schuchardt@canonical.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jszhang@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=stano.jakubek@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.