From: "H. Peter Anvin" <hpa@zytor.com>
To: torvalds@linux-foundation.org, andi@firstfloor.org,
linux-kernel@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Subject: [x86 setup 04/33] Unify the CPU features vectors between i386 and x86-64
Date: Wed, 11 Jul 2007 12:18:29 -0700 [thread overview]
Message-ID: <11841815393975-git-send-email-hpa@zytor.com> (raw)
Message-ID: <c74269f00504931e6a653be3b4f0684ca8753561.1184181208.git.hpa@zytor.com> (raw)
In-Reply-To: <11841815392122-git-send-email-hpa@zytor.com>
In-Reply-To: <7aca4ce0a222438c94300a2ea535270a21db8812.1184181208.git.hpa@zytor.com>
From: H. Peter Anvin <hpa@zytor.com>
Unify the handling of the CPU features vectors between i386 and x86-64.
This also adopts the collapsing of features which are required at
compile-time into constant tests from x86-64 to i386.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
arch/i386/kernel/cpu/proc.c | 15 +++--
arch/i386/kernel/verify_cpu.S | 12 ++--
arch/x86_64/kernel/setup.c | 13 ++--
arch/x86_64/kernel/verify_cpu.S | 22 +-----
include/asm-i386/cpufeature.h | 17 +++--
include/asm-i386/required-features.h | 38 ++++++++---
include/asm-x86_64/alternative.h | 68 ++++++++++---------
include/asm-x86_64/cpufeature.h | 115 +++----------------------------
include/asm-x86_64/processor.h | 2 -
include/asm-x86_64/required-features.h | 45 ++++++++++++
10 files changed, 159 insertions(+), 188 deletions(-)
create mode 100644 include/asm-x86_64/required-features.h
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
index 89d91e6..ed73091 100644
--- a/arch/i386/kernel/cpu/proc.c
+++ b/arch/i386/kernel/cpu/proc.c
@@ -29,7 +29,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
- NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", "3dnowext", "3dnow",
+ NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
+ "3dnowext", "3dnow",
/* Transmeta-defined */
"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
@@ -40,8 +41,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
/* Other (Linux-defined) */
"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
NULL, NULL, NULL, NULL,
- "constant_tsc", "up", NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "constant_tsc", "up", NULL, "arch_perfmon",
+ "pebs", "bts", NULL, "sync_rdtsc",
+ "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
@@ -57,9 +59,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8legacy", "abm",
- "sse4a", "misalignsse",
- "3dnowprefetch", "osvw", "ibs", NULL, NULL, NULL, NULL, NULL,
+ "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
+ "altmovcr8", "abm", "sse4a",
+ "misalignsse", "3dnowprefetch",
+ "osvw", "ibs", NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
};
diff --git a/arch/i386/kernel/verify_cpu.S b/arch/i386/kernel/verify_cpu.S
index f1d1eac..3efc5c1 100644
--- a/arch/i386/kernel/verify_cpu.S
+++ b/arch/i386/kernel/verify_cpu.S
@@ -20,7 +20,7 @@ verify_cpu:
testl $(1<<18),%eax
jz bad
#endif
-#if REQUIRED_MASK1 != 0
+#if REQUIRED_MASK0 != 0
pushfl # standard way to check for cpuid
popl %eax
movl %eax,%ebx
@@ -39,14 +39,14 @@ verify_cpu:
pushfl
popl %eax
cmpl %eax,%ebx
- jz bad # REQUIRED_MASK1 != 0 requires CPUID
+ jz bad # REQUIRED_MASK0 != 0 requires CPUID
movl $0x0,%eax # See if cpuid 1 is implemented
cpuid
cmpl $0x1,%eax
jb bad # no cpuid 1
-#if REQUIRED_MASK1 & NEED_CMPXCHG64
+#if REQUIRED_MASK0 & NEED_CMPXCHG64
/* Some VIA C3s need magic MSRs to enable CX64. Do this here */
cmpl $0x746e6543,%ebx # Cent
jne 1f
@@ -79,10 +79,10 @@ verify_cpu:
#error add proper model checking here
#endif
- andl $REQUIRED_MASK1,%edx
- xorl $REQUIRED_MASK1,%edx
+ andl $REQUIRED_MASK0,%edx
+ xorl $REQUIRED_MASK0,%edx
jnz bad
-#endif /* REQUIRED_MASK1 */
+#endif /* REQUIRED_MASK0 */
popfl
xor %eax,%eax
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index eb6524f..dc7630d 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -931,7 +931,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
"fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
"cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
"pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
- "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", NULL,
+ "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
/* AMD-defined */
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
@@ -947,10 +947,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Other (Linux-defined) */
- "cxmmx", NULL, "cyrix_arr", "centaur_mcr", NULL,
- "constant_tsc", NULL, NULL,
- "up", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
+ NULL, NULL, NULL, NULL,
+ "constant_tsc", "up", NULL, "arch_perfmon",
+ "pebs", "bts", NULL, "sync_rdtsc",
+ "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
@@ -961,7 +962,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
/* VIA/Cyrix/Centaur-defined */
NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86_64/kernel/verify_cpu.S b/arch/x86_64/kernel/verify_cpu.S
index e035f59..45b6f8a 100644
--- a/arch/x86_64/kernel/verify_cpu.S
+++ b/arch/x86_64/kernel/verify_cpu.S
@@ -37,20 +37,6 @@ verify_cpu:
pushl $0 # Kill any dangerous flags
popfl
- /* minimum CPUID flags for x86-64 as defined by AMD */
-#define M(x) (1<<(x))
-#define M2(a,b) M(a)|M(b)
-#define M4(a,b,c,d) M(a)|M(b)|M(c)|M(d)
-
-#define SSE_MASK \
- (M2(X86_FEATURE_XMM,X86_FEATURE_XMM2))
-#define REQUIRED_MASK1 \
- (M4(X86_FEATURE_FPU,X86_FEATURE_PSE,X86_FEATURE_TSC,X86_FEATURE_MSR)|\
- M4(X86_FEATURE_PAE,X86_FEATURE_CX8,X86_FEATURE_PGE,X86_FEATURE_CMOV)|\
- M(X86_FEATURE_FXSR))
-#define REQUIRED_MASK2 \
- (M(X86_FEATURE_LM - 32))
-
pushfl # standard way to check for cpuid
popl %eax
movl %eax,%ebx
@@ -79,8 +65,8 @@ verify_cpu:
verify_cpu_noamd:
movl $0x1,%eax # Does the cpu have what it takes
cpuid
- andl $REQUIRED_MASK1,%edx
- xorl $REQUIRED_MASK1,%edx
+ andl $REQUIRED_MASK0,%edx
+ xorl $REQUIRED_MASK0,%edx
jnz verify_cpu_no_longmode
movl $0x80000000,%eax # See if extended cpuid is implemented
@@ -90,8 +76,8 @@ verify_cpu_noamd:
movl $0x80000001,%eax # Does the cpu have what it takes
cpuid
- andl $REQUIRED_MASK2,%edx
- xorl $REQUIRED_MASK2,%edx
+ andl $REQUIRED_MASK1,%edx
+ xorl $REQUIRED_MASK1,%edx
jnz verify_cpu_no_longmode
verify_cpu_sse_test:
diff --git a/include/asm-i386/cpufeature.h b/include/asm-i386/cpufeature.h
index f514e90..7ea5f4a 100644
--- a/include/asm-i386/cpufeature.h
+++ b/include/asm-i386/cpufeature.h
@@ -81,6 +81,7 @@
#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
#define X86_FEATURE_LAPIC_TIMER_BROKEN (3*32+ 14) /* lapic timer broken in C1 */
#define X86_FEATURE_SYNC_RDTSC (3*32+15) /* RDTSC synchronizes the CPU */
+#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
@@ -108,11 +109,17 @@
#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
-#define cpu_has(c, bit) \
- ((__builtin_constant_p(bit) && (bit) < 32 && \
- (1UL << (bit)) & REQUIRED_MASK1) ? \
- 1 : \
- test_bit(bit, (c)->x86_capability))
+#define cpu_has(c, bit) \
+ (__builtin_constant_p(bit) && \
+ ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) || \
+ (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) || \
+ (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) || \
+ (((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) || \
+ (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) || \
+ (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) || \
+ (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ) \
+ ? 1 : \
+ test_bit(bit, (c)->x86_capability))
#define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
diff --git a/include/asm-i386/required-features.h b/include/asm-i386/required-features.h
index 9db866c..a9c3b11 100644
--- a/include/asm-i386/required-features.h
+++ b/include/asm-i386/required-features.h
@@ -3,32 +3,52 @@
/* Define minimum CPUID feature set for kernel These bits are checked
really early to actually display a visible error message before the
- kernel dies. Only add word 0 bits here
+ kernel dies. Make sure to assign features to the proper mask!
Some requirements that are not in CPUID yet are also in the
- CONFIG_X86_MINIMUM_CPU mode which is checked too.
+ CONFIG_X86_MINIMUM_CPU_FAMILY which is checked too.
The real information is in arch/i386/Kconfig.cpu, this just converts
the CONFIGs into a bitmask */
+#ifndef CONFIG_MATH_EMULATION
+# define NEED_FPU (1<<(X86_FEATURE_FPU & 31))
+#else
+# define NEED_FPU 0
+#endif
+
#ifdef CONFIG_X86_PAE
-#define NEED_PAE (1<<X86_FEATURE_PAE)
+# define NEED_PAE (1<<(X86_FEATURE_PAE & 31))
#else
-#define NEED_PAE 0
+# define NEED_PAE 0
#endif
#ifdef CONFIG_X86_CMOV
-#define NEED_CMOV (1<<X86_FEATURE_CMOV)
+# define NEED_CMOV (1<<(X86_FEATURE_CMOV & 31))
#else
-#define NEED_CMOV 0
+# define NEED_CMOV 0
#endif
#ifdef CONFIG_X86_CMPXCHG64
-#define NEED_CMPXCHG64 (1<<X86_FEATURE_CX8)
+# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
+#else
+# define NEED_CX8 0
+#endif
+
+#define REQUIRED_MASK0 (NEED_FPU|NEED_PAE|NEED_CMOV|NEED_CX8)
+
+#ifdef CONFIG_X86_USE_3DNOW
+# define NEED_3DNOW (1<<(X86_FEATURE_3DNOW & 31))
#else
-#define NEED_CMPXCHG64 0
+# define NEED_3DNOW 0
#endif
-#define REQUIRED_MASK1 (NEED_PAE|NEED_CMOV|NEED_CMPXCHG64)
+#define REQUIRED_MASK1 (NEED_3DNOW)
+
+#define REQUIRED_MASK2 0
+#define REQUIRED_MASK3 0
+#define REQUIRED_MASK4 0
+#define REQUIRED_MASK5 0
+#define REQUIRED_MASK6 0
#endif
diff --git a/include/asm-x86_64/alternative.h b/include/asm-x86_64/alternative.h
index a094276..eea7aec 100644
--- a/include/asm-x86_64/alternative.h
+++ b/include/asm-x86_64/alternative.h
@@ -5,6 +5,41 @@
#include <linux/types.h>
#include <linux/stddef.h>
+
+/*
+ * Alternative inline assembly for SMP.
+ *
+ * The LOCK_PREFIX macro defined here replaces the LOCK and
+ * LOCK_PREFIX macros used everywhere in the source tree.
+ *
+ * SMP alternatives use the same data structures as the other
+ * alternatives and the X86_FEATURE_UP flag to indicate the case of a
+ * UP system running a SMP kernel. The existing apply_alternatives()
+ * works fine for patching a SMP kernel for UP.
+ *
+ * The SMP alternative tables can be kept after boot and contain both
+ * UP and SMP versions of the instructions to allow switching back to
+ * SMP at runtime, when hotplugging in a new CPU, which is especially
+ * useful in virtualized environments.
+ *
+ * The very common lock prefix is handled as special case in a
+ * separate table which is a pure address list without replacement ptr
+ * and size information. That keeps the table sizes small.
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX \
+ ".section .smp_locks,\"a\"\n" \
+ " .align 8\n" \
+ " .quad 661f\n" /* address */ \
+ ".previous\n" \
+ "661:\n\tlock; "
+
+#else /* ! CONFIG_SMP */
+#define LOCK_PREFIX ""
+#endif
+
+/* This must be included *after* the definition of LOCK_PREFIX */
#include <asm/cpufeature.h>
struct alt_instr {
@@ -108,39 +143,6 @@ static inline void alternatives_smp_switch(int smp) {}
*/
#define ASM_OUTPUT2(a, b) a, b
-/*
- * Alternative inline assembly for SMP.
- *
- * The LOCK_PREFIX macro defined here replaces the LOCK and
- * LOCK_PREFIX macros used everywhere in the source tree.
- *
- * SMP alternatives use the same data structures as the other
- * alternatives and the X86_FEATURE_UP flag to indicate the case of a
- * UP system running a SMP kernel. The existing apply_alternatives()
- * works fine for patching a SMP kernel for UP.
- *
- * The SMP alternative tables can be kept after boot and contain both
- * UP and SMP versions of the instructions to allow switching back to
- * SMP at runtime, when hotplugging in a new CPU, which is especially
- * useful in virtualized environments.
- *
- * The very common lock prefix is handled as special case in a
- * separate table which is a pure address list without replacement ptr
- * and size information. That keeps the table sizes small.
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX \
- ".section .smp_locks,\"a\"\n" \
- " .align 8\n" \
- " .quad 661f\n" /* address */ \
- ".previous\n" \
- "661:\n\tlock; "
-
-#else /* ! CONFIG_SMP */
-#define LOCK_PREFIX ""
-#endif
-
struct paravirt_patch;
#ifdef CONFIG_PARAVIRT
void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end);
diff --git a/include/asm-x86_64/cpufeature.h b/include/asm-x86_64/cpufeature.h
index 0b3c686..8baefc3 100644
--- a/include/asm-x86_64/cpufeature.h
+++ b/include/asm-x86_64/cpufeature.h
@@ -7,115 +7,24 @@
#ifndef __ASM_X8664_CPUFEATURE_H
#define __ASM_X8664_CPUFEATURE_H
-#define NCAPINTS 7 /* N 32-bit words worth of info */
+#include <asm-i386/cpufeature.h>
-/* Intel-defined CPU features, CPUID level 0x00000001, word 0 */
-#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */
-#define X86_FEATURE_VME (0*32+ 1) /* Virtual Mode Extensions */
-#define X86_FEATURE_DE (0*32+ 2) /* Debugging Extensions */
-#define X86_FEATURE_PSE (0*32+ 3) /* Page Size Extensions */
-#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */
-#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
-#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */
-#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */
-#define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */
-#define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */
-#define X86_FEATURE_MTRR (0*32+12) /* Memory Type Range Registers */
-#define X86_FEATURE_PGE (0*32+13) /* Page Global Enable */
-#define X86_FEATURE_MCA (0*32+14) /* Machine Check Architecture */
-#define X86_FEATURE_CMOV (0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
-#define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */
-#define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */
-#define X86_FEATURE_PN (0*32+18) /* Processor serial number */
-#define X86_FEATURE_CLFLSH (0*32+19) /* Supports the CLFLUSH instruction */
-#define X86_FEATURE_DS (0*32+21) /* Debug Store */
-#define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */
-#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
- /* of FPU context), and CR4.OSFXSR available */
-#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */
-#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */
-#define X86_FEATURE_SELFSNOOP (0*32+27) /* CPU self snoop */
-#define X86_FEATURE_HT (0*32+28) /* Hyper-Threading */
-#define X86_FEATURE_ACC (0*32+29) /* Automatic clock control */
-#define X86_FEATURE_IA64 (0*32+30) /* IA-64 processor */
-
-/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
-/* Don't duplicate feature flags which are redundant with Intel! */
-#define X86_FEATURE_SYSCALL (1*32+11) /* SYSCALL/SYSRET */
-#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
-#define X86_FEATURE_FXSR_OPT (1*32+25) /* FXSR optimizations */
-#define X86_FEATURE_RDTSCP (1*32+27) /* RDTSCP */
-#define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */
-#define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */
-#define X86_FEATURE_3DNOW (1*32+31) /* 3DNow! */
-
-/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
-#define X86_FEATURE_RECOVERY (2*32+ 0) /* CPU in recovery mode */
-#define X86_FEATURE_LONGRUN (2*32+ 1) /* Longrun power control */
-#define X86_FEATURE_LRTI (2*32+ 3) /* LongRun table interface */
-
-/* Other features, Linux-defined mapping, word 3 */
-/* This range is used for feature bits which conflict or are synthesized */
-#define X86_FEATURE_CXMMX (3*32+ 0) /* Cyrix MMX extensions */
-#define X86_FEATURE_K6_MTRR (3*32+ 1) /* AMD K6 nonstandard MTRRs */
-#define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */
-#define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */
-#define X86_FEATURE_REP_GOOD (3*32+ 4) /* rep microcode works well on this CPU */
-#define X86_FEATURE_CONSTANT_TSC (3*32+5) /* TSC runs at constant rate */
-#define X86_FEATURE_SYNC_RDTSC (3*32+6) /* RDTSC syncs CPU core */
-#define X86_FEATURE_FXSAVE_LEAK (3*32+7) /* FIP/FOP/FDP leaks through FXSAVE */
-#define X86_FEATURE_UP (3*32+8) /* SMP kernel running on UP */
-#define X86_FEATURE_ARCH_PERFMON (3*32+9) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS (3*32+10) /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS (3*32+11) /* Branch Trace Store */
-
-/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
-#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
-#define X86_FEATURE_MWAIT (4*32+ 3) /* Monitor/Mwait support */
-#define X86_FEATURE_DSCPL (4*32+ 4) /* CPL Qualified Debug Store */
-#define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */
-#define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */
-#define X86_FEATURE_CID (4*32+10) /* Context ID */
-#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */
-#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */
-
-/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
-#define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */
-#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* on-CPU RNG enabled */
-#define X86_FEATURE_XCRYPT (5*32+ 6) /* on-CPU crypto (xcrypt insn) */
-#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* on-CPU crypto enabled */
-
-/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
-#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
-#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
-
-#define cpu_has(c, bit) test_bit(bit, (c)->x86_capability)
-#define boot_cpu_has(bit) test_bit(bit, boot_cpu_data.x86_capability)
-
-#define cpu_has_fpu 1
+#undef cpu_has_vme
#define cpu_has_vme 0
-#define cpu_has_de 1
-#define cpu_has_pse 1
-#define cpu_has_tsc 1
+
+#undef cpu_has_pae
#define cpu_has_pae ___BUG___
-#define cpu_has_pge 1
-#define cpu_has_apic boot_cpu_has(X86_FEATURE_APIC)
-#define cpu_has_mtrr 1
-#define cpu_has_mmx 1
-#define cpu_has_fxsr 1
-#define cpu_has_xmm 1
-#define cpu_has_xmm2 1
-#define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3)
-#define cpu_has_ht boot_cpu_has(X86_FEATURE_HT)
+
+#undef cpu_has_mp
#define cpu_has_mp 1 /* XXX */
+
+#undef cpu_has_k6_mtrr
#define cpu_has_k6_mtrr 0
+
+#undef cpu_has_cyrix_arr
#define cpu_has_cyrix_arr 0
+
+#undef cpu_has_centaur_mcr
#define cpu_has_centaur_mcr 0
-#define cpu_has_clflush boot_cpu_has(X86_FEATURE_CLFLSH)
-#define cpu_has_ds boot_cpu_has(X86_FEATURE_DS)
-#define cpu_has_pebs boot_cpu_has(X86_FEATURE_PEBS)
-#define cpu_has_bts boot_cpu_has(X86_FEATURE_BTS)
#endif /* __ASM_X8664_CPUFEATURE_H */
diff --git a/include/asm-x86_64/processor.h b/include/asm-x86_64/processor.h
index 461ffe4..df64572 100644
--- a/include/asm-x86_64/processor.h
+++ b/include/asm-x86_64/processor.h
@@ -368,8 +368,6 @@ static inline void sync_core(void)
asm volatile("cpuid" : "=a" (tmp) : "0" (1) : "ebx","ecx","edx","memory");
}
-#define cpu_has_fpu 1
-
#define ARCH_HAS_PREFETCH
static inline void prefetch(void *x)
{
diff --git a/include/asm-x86_64/required-features.h b/include/asm-x86_64/required-features.h
new file mode 100644
index 0000000..262f315
--- /dev/null
+++ b/include/asm-x86_64/required-features.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_REQUIRED_FEATURES_H
+#define _ASM_REQUIRED_FEATURES_H 1
+
+/* Define minimum CPUID feature set for kernel These bits are checked
+ really early to actually display a visible error message before the
+ kernel dies. Make sure to assign features to the proper mask!
+
+ The real information is in arch/x86_64/Kconfig.cpu, this just converts
+ the CONFIGs into a bitmask */
+
+/* x86-64 baseline features */
+#define NEED_FPU (1<<(X86_FEATURE_FPU & 31))
+#define NEED_PSE (1<<(X86_FEATURE_PSE & 31))
+#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
+#define NEED_PAE (1<<(X86_FEATURE_PAE & 31))
+#define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
+#define NEED_PGE (1<<(X86_FEATURE_PGE & 31))
+#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
+#define NEED_CMOV (1<<(X86_FEATURE_CMOV & 31))
+#define NEED_XMM (1<<(X86_FEATURE_XMM & 31))
+#define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31))
+
+#define REQUIRED_MASK0 (NEED_FPU|NEED_PSE|NEED_MSR|NEED_PAE|\
+ NEED_CX8|NEED_PGE|NEED_FXSR|NEED_CMOV|\
+ NEED_XMM|NEED_XMM2)
+#define SSE_MASK (NEED_XMM|NEED_XMM2)
+
+/* x86-64 baseline features */
+#define NEED_LM (1<<(X86_FEATURE_LM & 31))
+
+#ifdef CONFIG_X86_USE_3DNOW
+# define NEED_3DNOW (1<<(X86_FEATURE_3DNOW & 31))
+#else
+# define NEED_3DNOW 0
+#endif
+
+#define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW)
+
+#define REQUIRED_MASK2 0
+#define REQUIRED_MASK3 0
+#define REQUIRED_MASK4 0
+#define REQUIRED_MASK5 0
+#define REQUIRED_MASK6 0
+
+#endif
--
1.5.2.2
next prev parent reply other threads:[~2007-07-11 19:21 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-11 19:18 x86 setup code rewrite in C - revised H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 01/33] x86 setup: MAINTAINERS: formally take responsibility for the i386 boot code H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 02/33] hd.c: remove BIOS/CMOS queries H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 03/33] include/asm-i386/boot.h: This is <asm/boot.h>, not <linux/boot.h> H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin [this message]
2007-07-11 19:18 ` [x86 setup 04/33] Unify the CPU features vectors between i386 and x86-64 H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 05/33] Change CONFIG_X86_MINIMUM_CPU_MODEL to CONFIG_X86_MINIMUM_CPU_FAMILY H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 06/33] Clean up struct screen_info (<linux/screen_info.h>) H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 07/33] Use a new CPU feature word to cover all Intel features that are spread around H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 08/33] Define zero-page offset 0x1e4 as a scratch field, and use it H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 09/33] Make definitions for struct e820entry and struct e820map consistent H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 10/33] Make struct boot_params a real structure, and remove obsolete fields H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 11/33] x86-64: add CONFIG_PHYSICAL_ALIGN for consistency with i386 H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 12/33] x86-64: add symbolic constants for the boot segment selectors H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 13/33] Header file to produce 16-bit code with gcc H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 14/33] Top header file for new x86 setup code H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 15/33] Simple bitops for the " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 16/33] String-handling functions " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 17/33] A20 handling code H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 18/33] APM probing code H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 19/33] Command-line parsing code for the new x86 setup code H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 20/33] Console-writing " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 21/33] Version string " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 22/33] CPU features verification " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 23/33] EDD probing code " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 24/33] MCA support for " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 25/33] Memory probing support for the " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 26/33] Voyager " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 27/33] Video mode probing " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-16 10:59 ` Martin Mares
2007-07-11 19:18 ` [x86 setup 28/33] Code for actual protected-mode entry H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 29/33] Assembly header and main routine for new x86 setup code H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 30/33] Linker script for the " H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 31/33] Use the new x86 setup code for i386 H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-13 9:27 ` Tilman Schmidt
2007-07-11 19:18 ` [x86 setup 32/33] Use the new x86 setup code for x86-64; unify with i386 H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 19:18 ` [x86 setup 33/33] Remove old i386 setup code H. Peter Anvin
2007-07-11 19:18 ` H. Peter Anvin
2007-07-11 20:08 ` x86 setup code rewrite in C - revised Jeff Garzik
2007-07-11 20:29 ` H. Peter Anvin
2007-07-12 17:24 ` Linus Torvalds
2007-07-12 17:30 ` Andrew Morton
2007-07-12 17:49 ` Linus Torvalds
2007-07-12 19:38 ` Andi Kleen
-- strict thread matches above, loose matches on Subject: below --
2007-07-10 2:51 x86 setup code rewrite in C H. Peter Anvin
2007-07-10 2:51 ` [x86 setup 01/33] x86 setup: MAINTAINERS: formally take responsibility for the i386 boot code H. Peter Anvin
2007-07-10 2:51 ` [x86 setup 02/33] hd.c: remove BIOS/CMOS queries H. Peter Anvin
2007-07-10 2:51 ` [x86 setup 03/33] include/asm-i386/boot.h: This is <asm/boot.h>, not <linux/boot.h> H. Peter Anvin
2007-07-10 2:51 ` [x86 setup 01/33] x86 setup: MAINTAINERS: formally take responsibility for the i386 boot code H. Peter Anvin
2007-07-10 2:51 ` [x86 setup 04/33] Unify the CPU features vectors between i386 and x86-64 H. Peter Anvin
2007-07-10 2:51 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11841815393975-git-send-email-hpa@zytor.com \
--to=hpa@zytor.com \
--cc=andi@firstfloor.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.