From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org,
alan@lxorguk.ukuu.org.uk, liml@rtr.ca
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 2/4] libata: implement ATA_QCFLAG_RETRY
Date: Thu, 27 Mar 2008 19:14:24 +0900 [thread overview]
Message-ID: <12066128663552-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <12066128663306-git-send-email-htejun@gmail.com>
Currently whether a command should be retried after failure is
determined inside ata_eh_finish(). Add ATA_QCFLAG_RETRY and move the
logic into ata_eh_autopsy(). This makes things clearer and helps
extending retry determination logic.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-eh.c | 18 ++++++++----------
include/linux/libata.h | 1 +
2 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a583032..5f3d294 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1804,6 +1804,11 @@ static void ata_eh_link_autopsy(struct ata_link *link)
if (qc->flags & ATA_QCFLAG_SENSE_VALID)
qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
+ /* determine whether the command is worth retrying */
+ if (!(qc->err_mask & AC_ERR_INVALID) &&
+ ((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV))
+ qc->flags |= ATA_QCFLAG_RETRY;
+
/* accumulate error info */
ehc->i.dev = qc->dev;
all_err_mask |= qc->err_mask;
@@ -2817,18 +2822,11 @@ void ata_eh_finish(struct ata_port *ap)
/* FIXME: Once EH migration is complete,
* generate sense data in this function,
* considering both err_mask and tf.
- *
- * There's no point in retrying invalid
- * (detected by libata) and non-IO device
- * errors (rejected by device). Finish them
- * immediately.
*/
- if ((qc->err_mask & AC_ERR_INVALID) ||
- (!(qc->flags & ATA_QCFLAG_IO) &&
- qc->err_mask == AC_ERR_DEV))
- ata_eh_qc_complete(qc);
- else
+ if (qc->flags & ATA_QCFLAG_RETRY)
ata_eh_qc_retry(qc);
+ else
+ ata_eh_qc_complete(qc);
} else {
if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
ata_eh_qc_complete(qc);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b064bfe..d06dd12 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -225,6 +225,7 @@ enum {
ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */
ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */
ATA_QCFLAG_QUIET = (1 << 6), /* don't report device error */
+ ATA_QCFLAG_RETRY = (1 << 7), /* retry after failure */
ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */
ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */
--
1.5.2.4
next prev parent reply other threads:[~2008-03-27 10:14 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-27 10:14 [PATCHSET #upstream] libata: improve FLUSH error handling Tejun Heo
2008-03-27 10:14 ` [PATCH 1/4] libata: make ata_tf_to_lba[48]() generic Tejun Heo
2008-04-04 7:45 ` Jeff Garzik
2008-03-27 10:14 ` Tejun Heo [this message]
2008-03-27 10:14 ` [PATCH 3/4] libata: kill unused ata_flush_cache() Tejun Heo
2008-03-27 10:14 ` [PATCH 4/4] libata: improve FLUSH error handling Tejun Heo
2008-04-04 7:46 ` Jeff Garzik
2008-03-27 10:23 ` Debug patch to induce errors on FLUSH Tejun Heo
2008-03-27 14:24 ` [PATCHSET #upstream] libata: improve FLUSH error handling Mark Lord
2008-03-27 14:35 ` Mark Lord
2008-03-27 15:31 ` Alan Cox
2008-03-27 18:01 ` Ric Wheeler
2008-03-28 1:57 ` Tejun Heo
2008-03-28 2:33 ` Mark Lord
2008-03-28 13:36 ` Ric Wheeler
2008-03-28 14:52 ` Tejun Heo
2008-03-28 14:53 ` Ric Wheeler
2008-03-28 15:16 ` Alan Cox
2008-03-28 16:57 ` Ric Wheeler
2008-03-28 16:04 ` Mark Lord
2008-03-27 17:53 ` Ric Wheeler
2008-03-27 18:52 ` Jeff Garzik
2008-03-27 20:23 ` Ric Wheeler
2008-03-28 7:46 ` Andi Kleen
2008-03-28 8:30 ` Tejun Heo
2008-03-28 8:48 ` Andi Kleen
2008-03-28 8:53 ` Tejun Heo
2008-03-27 17:51 ` Ric Wheeler
2008-03-27 18:53 ` Jeff Garzik
2008-03-27 22:00 ` Alan Cox
2008-03-28 2:02 ` Tejun Heo
2008-03-28 9:48 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12066128663552-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.