From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org, liml@rtr.ca
Cc: Tejun Heo <htejun@gmail.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCH 3/4] libata: kill unused ata_flush_cache()
Date: Thu, 27 Mar 2008 19:14:25 +0900 [thread overview]
Message-ID: <12066128663976-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <12066128663306-git-send-email-htejun@gmail.com>
ata_flush_code() hasn't been in use for quite some time now. Kill it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
---
drivers/ata/libata-core.c | 26 --------------------------
drivers/ata/libata.h | 1 -
2 files changed, 0 insertions(+), 27 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1a8601f..aba9a71 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6475,32 +6475,6 @@ int ata_link_offline(struct ata_link *link)
return 0;
}
-int ata_flush_cache(struct ata_device *dev)
-{
- unsigned int err_mask;
- u8 cmd;
-
- if (!ata_try_flush_cache(dev))
- return 0;
-
- if (dev->flags & ATA_DFLAG_FLUSH_EXT)
- cmd = ATA_CMD_FLUSH_EXT;
- else
- cmd = ATA_CMD_FLUSH;
-
- /* This is wrong. On a failed flush we get back the LBA of the lost
- sector and we should (assuming it wasn't aborted as unknown) issue
- a further flush command to continue the writeback until it
- does not error */
- err_mask = ata_do_simple_cmd(dev, cmd);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n");
- return -EIO;
- }
-
- return 0;
-}
-
#ifdef CONFIG_PM
static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
unsigned int action, unsigned int ehi_flags,
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 20edee0..e48d17f 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -96,7 +96,6 @@ extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
-extern int ata_flush_cache(struct ata_device *dev);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
extern int sata_link_init_spd(struct ata_link *link);
--
1.5.2.4
next prev parent reply other threads:[~2008-03-27 10:14 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-27 10:14 [PATCHSET #upstream] libata: improve FLUSH error handling Tejun Heo
2008-03-27 10:14 ` [PATCH 1/4] libata: make ata_tf_to_lba[48]() generic Tejun Heo
2008-04-04 7:45 ` Jeff Garzik
2008-03-27 10:14 ` [PATCH 2/4] libata: implement ATA_QCFLAG_RETRY Tejun Heo
2008-03-27 10:14 ` Tejun Heo [this message]
2008-03-27 10:14 ` [PATCH 4/4] libata: improve FLUSH error handling Tejun Heo
2008-04-04 7:46 ` Jeff Garzik
2008-03-27 10:23 ` Debug patch to induce errors on FLUSH Tejun Heo
2008-03-27 14:24 ` [PATCHSET #upstream] libata: improve FLUSH error handling Mark Lord
2008-03-27 14:35 ` Mark Lord
2008-03-27 15:31 ` Alan Cox
2008-03-27 18:01 ` Ric Wheeler
2008-03-28 1:57 ` Tejun Heo
2008-03-28 2:33 ` Mark Lord
2008-03-28 13:36 ` Ric Wheeler
2008-03-28 14:52 ` Tejun Heo
2008-03-28 14:53 ` Ric Wheeler
2008-03-28 15:16 ` Alan Cox
2008-03-28 16:57 ` Ric Wheeler
2008-03-28 16:04 ` Mark Lord
2008-03-27 17:53 ` Ric Wheeler
2008-03-27 18:52 ` Jeff Garzik
2008-03-27 20:23 ` Ric Wheeler
2008-03-28 7:46 ` Andi Kleen
2008-03-28 8:30 ` Tejun Heo
2008-03-28 8:48 ` Andi Kleen
2008-03-28 8:53 ` Tejun Heo
2008-03-27 17:51 ` Ric Wheeler
2008-03-27 18:53 ` Jeff Garzik
2008-03-27 22:00 ` Alan Cox
2008-03-28 2:02 ` Tejun Heo
2008-03-28 9:48 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12066128663976-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.