* [PATCH 0/2] Add basic dts support for RK3308 @ 2019-10-17 3:02 ` Andy Yan 0 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:02 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: devicetree, obh+dt, linux-kernel, linux-arm-kernel, Andy Yan RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. As the clk and pinctrl drivers are landed, we post the basic dts support, make it convenient for other module development. Andy Yan (2): arm64: dts: rockchip: Add core dts for RK3308 SOC arm64: dts: rockchip: Add basic dts for RK3308 EVB .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 206 ++ arch/arm64/boot/dts/rockchip/rk3308.dtsi | 1875 +++++++++++++++++ 4 files changed, 2087 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-evb.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3308.dtsi -- 2.17.1 ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/2] Add basic dts support for RK3308 @ 2019-10-17 3:02 ` Andy Yan 0 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:02 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: linux-kernel, linux-arm-kernel, obh+dt, devicetree, Andy Yan RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. As the clk and pinctrl drivers are landed, we post the basic dts support, make it convenient for other module development. Andy Yan (2): arm64: dts: rockchip: Add core dts for RK3308 SOC arm64: dts: rockchip: Add basic dts for RK3308 EVB .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 206 ++ arch/arm64/boot/dts/rockchip/rk3308.dtsi | 1875 +++++++++++++++++ 4 files changed, 2087 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-evb.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3308.dtsi -- 2.17.1 ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/2] Add basic dts support for RK3308 @ 2019-10-17 3:02 ` Andy Yan 0 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:02 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: devicetree, obh+dt, linux-kernel, linux-arm-kernel, Andy Yan RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. As the clk and pinctrl drivers are landed, we post the basic dts support, make it convenient for other module development. Andy Yan (2): arm64: dts: rockchip: Add core dts for RK3308 SOC arm64: dts: rockchip: Add basic dts for RK3308 EVB .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 206 ++ arch/arm64/boot/dts/rockchip/rk3308.dtsi | 1875 +++++++++++++++++ 4 files changed, 2087 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-evb.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3308.dtsi -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC 2019-10-17 3:02 ` Andy Yan (?) @ 2019-10-17 3:04 ` Andy Yan -1 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:04 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: devicetree, obh+dt, linux-kernel, linux-arm-kernel, Andy Yan RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. This patch add basic core dtsi file for it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> --- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 1875 ++++++++++++++++++++++ 1 file changed, 1875 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi new file mode 100644 index 000000000000..cda63ffb0d2f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -0,0 +1,1875 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +#include <dt-bindings/clock/rk3308-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3308"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &mac; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000 1025000 1340000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1125000 1125000 1340000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + mac_clkin: external-mac-clock { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "mac_clkin"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + ramoops_mem: ramoops_mem { + reg = <0x0 0x110000 0x0 0xf0000>; + reg-names = "ramoops_mem"; + }; + + ramoops: ramoops { + compatible = "ramoops"; + record-size = <0x0 0x30000>; + console-size = <0x0 0xc0000>; + ftrace-size = <0x0 0x00000>; + pmsg-size = <0x0 0x00000>; + memory-region = <&ramoops_mem>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + grf: grf@ff000000 { + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff000000 0x0 0x10000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x500>; + mode-bootloader = <BOOT_BL_DOWNLOAD>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-fastboot = <BOOT_FASTBOOT>; + }; + }; + + detect_grf: syscon@ff00b000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff00b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + core_grf: syscon@ff00c000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff00c000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + }; + + i2c0: i2c@ff040000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff040000 0x0 0x1000>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff050000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff050000 0x0 0x1000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff060000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff060000 0x0 0x1000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff070000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff070000 0x0 0x1000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@ff080000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff080000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0a0000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + uart1: serial@ff0b0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0b0000 0x0 0x100>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + status = "disabled"; + }; + + uart2: serial@ff0c0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0c0000 0x0 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart3: serial@ff0d0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0d0000 0x0 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + uart4: serial@ff0e0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0e0000 0x0 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>; + status = "disabled"; + }; + + spi0: spi@ff120000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff120000 0x0 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; + status = "disabled"; + }; + + spi1: spi@ff130000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff130000 0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>; + pinctrl-1 = <&spi1_clk_hs &spi1_csn0 &spi1_miso_hs &spi1_mosi_hs>; + status = "disabled"; + }; + + spi2: spi@ff140000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff140000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 16>, <&dmac1 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>; + pinctrl-1 = <&spi2_clk_hs &spi2_csn0 &spi2_miso_hs &spi2_mosi_hs>; + status = "disabled"; + }; + + pwm8: pwm@ff160000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm8_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm9: pwm@ff160010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm9_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm10: pwm@ff160020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm10_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm11: pwm@ff160030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm11_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm4: pwm@ff170000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm5: pwm@ff170010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm6: pwm@ff170020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm7: pwm@ff170030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm0: pwm@ff180000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm1: pwm@ff180010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm2: pwm@ff180020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm3: pwm@ff180030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + rktimer: rktimer@ff1a0000 { + compatible = "rockchip,rk3288-timer"; + reg = <0x0 0xff1a0000 0x0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + saradc: saradc@ff1e0000 { + compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff1e0000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac0: dma-controller@ff2c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + peripherals-req-type-burst; + }; + + dmac1: dma-controller@ff2d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2d0000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + peripherals-req-type-burst; + }; + }; + + i2s_2ch_0: i2s@ff350000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff350000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 8>, <&dmac1 9>; + dma-names = "tx", "rx"; + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; + reset-names = "reset-m", "reset-h"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_2ch_0_sclk + &i2s_2ch_0_lrck + &i2s_2ch_0_sdi + &i2s_2ch_0_sdo>; + status = "disabled"; + }; + + i2s_2ch_1: i2s@ff360000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff360000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 11>; + dma-names = "rx"; + resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; + reset-names = "reset-m", "reset-h"; + status = "disabled"; + }; + + spdif_tx: spdif-tx@ff3a0000 { + compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif"; + reg = <0x0 0xff3a0000 0x0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_out>; + status = "disabled"; + }; + + sdmmc: dwmmc@ff480000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff480000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <4>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + status = "disabled"; + }; + + emmc: dwmmc@ff490000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff490000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <8>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdio: dwmmc@ff4a0000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff4a0000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <4>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>; + status = "disabled"; + }; + + mac: ethernet@ff4e0000 { + compatible = "rockchip,rk3308-mac"; + reg = <0x0 0xff4e0000 0x0 0x10000>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, + <&cru SCLK_MAC>, <&cru ACLK_MAC>, + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac", "clk_mac_speed"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; + resets = <&cru SRST_MAC_A>; + reset-names = "stmmaceth"; + status = "disabled"; + }; + + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0x0 0xff500000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + + assigned-clocks = <&cru SCLK_RTC32K>; + assigned-clock-rates = <32768>; + }; + + gic: interrupt-controller@ff580000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + + reg = <0x0 0xff581000 0x0 0x1000>, + <0x0 0xff582000 0x0 0x2000>, + <0x0 0xff584000 0x0 0x2000>, + <0x0 0xff586000 0x0 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + sram: sram@fff80000 { + compatible = "mmio-sram"; + reg = <0x0 0xfff80000 0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xfff80000 0x40000>; + /* reserved for ddr dvfs and system suspend/resume */ + ddr-sram@0 { + reg = <0x0 0x8000>; + }; + /* reserved for vad audio buffer */ + vad_sram: vad-sram@8000 { + reg = <0x8000 0x38000>; + }; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3308-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + gpio0: gpio0@ff220000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff220000 0x0 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff230000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff230000 0x0 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff240000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff240000 0x0 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff250000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff260000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <1 RK_PD0 2 &pcfg_pull_none_smt>, + <1 RK_PD1 2 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <0 RK_PB3 1 &pcfg_pull_none_smt>, + <0 RK_PB4 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PA2 3 &pcfg_pull_none_smt>, + <2 RK_PA3 3 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m0 { + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + <0 RK_PB7 2 &pcfg_pull_none_smt>, + <0 RK_PC0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m1 { + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_none_smt>, + <3 RK_PB5 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m2 { + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + <2 RK_PA1 3 &pcfg_pull_none_smt>, + <2 RK_PA0 3 &pcfg_pull_none_smt>; + }; + }; + + i2s_2ch_0 { + i2s_2ch_0_mclk: i2s-2ch-0-mclk { + rockchip,pins = + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sclk: i2s-2ch-0-sclk { + rockchip,pins = + <4 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_lrck: i2s-2ch-0-lrck { + rockchip,pins = + <4 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdo: i2s-2ch-0-sdo { + rockchip,pins = + <4 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdi: i2s-2ch-0-sdi { + rockchip,pins = + <4 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_0 { + i2s_8ch_0_mclk: i2s-8ch-0-mclk { + rockchip,pins = + <2 RK_PA4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclktx: i2s-8ch-0-sclktx { + rockchip,pins = + <2 RK_PA5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx { + rockchip,pins = + <2 RK_PA6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx { + rockchip,pins = + <2 RK_PA7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx { + rockchip,pins = + <2 RK_PB0 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 { + rockchip,pins = + <2 RK_PB1 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 { + rockchip,pins = + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 { + rockchip,pins = + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 { + rockchip,pins = + <2 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 { + rockchip,pins = + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 { + rockchip,pins = + <2 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m0 { + i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk { + rockchip,pins = + <1 RK_PA2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx { + rockchip,pins = + <1 RK_PA3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx { + rockchip,pins = + <1 RK_PA4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx { + rockchip,pins = + <1 RK_PA5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx { + rockchip,pins = + <1 RK_PA6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 { + rockchip,pins = + <1 RK_PA7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m1 { + i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk { + rockchip,pins = + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx { + rockchip,pins = + <1 RK_PB5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx { + rockchip,pins = + <1 RK_PB6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx { + rockchip,pins = + <1 RK_PB7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx { + rockchip,pins = + <1 RK_PC0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 { + rockchip,pins = + <1 RK_PC1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 { + rockchip,pins = + <1 RK_PC2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 { + rockchip,pins = + <1 RK_PC3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 { + rockchip,pins = + <1 RK_PC4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 2 &pcfg_pull_none>; + }; + }; + + pdm_m0 { + pdm_m0_clk: pdm-m0-clk { + rockchip,pins = + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi0: pdm-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi1: pdm-m0-sdi1 { + rockchip,pins = + <1 RK_PB2 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi2: pdm-m0-sdi2 { + rockchip,pins = + <1 RK_PB1 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi3: pdm-m0-sdi3 { + rockchip,pins = + <1 RK_PB0 3 &pcfg_pull_none>; + }; + }; + + pdm_m1 { + pdm_m1_clk: pdm-m1-clk { + rockchip,pins = + <1 RK_PB6 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi0: pdm-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi1: pdm-m1-sdi1 { + rockchip,pins = + <1 RK_PC4 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi2: pdm-m1-sdi2 { + rockchip,pins = + <1 RK_PC3 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi3: pdm-m1-sdi3 { + rockchip,pins = + <1 RK_PC2 4 &pcfg_pull_none>; + }; + }; + + pdm_m2 { + pdm_m2_clkm: pdm-m2-clkm { + rockchip,pins = + <2 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m2_clk: pdm-m2-clk { + rockchip,pins = + <2 RK_PA6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi0: pdm-m2-sdi0 { + rockchip,pins = + <2 RK_PB5 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi1: pdm-m2-sdi1 { + rockchip,pins = + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi2: pdm-m2-sdi2 { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi3: pdm-m2-sdi3 { + rockchip,pins = + <2 RK_PC0 2 &pcfg_pull_none>; + }; + }; + + spdif_in { + spdif_in: spdif-in { + rockchip,pins = + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + spdif_out { + spdif_out: spdif-out { + rockchip,pins = + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + tsadc { + tsadc_otp_gpio: tsadc-otp-gpio { + rockchip,pins = + <0 RK_PB2 0 &pcfg_pull_none>; + }; + + tsadc_otp_out: tsadc-otp-out { + rockchip,pins = + <0 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <2 RK_PA1 1 &pcfg_pull_up>, + <2 RK_PA0 1 &pcfg_pull_up>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <2 RK_PA2 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <2 RK_PA3 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = + <2 RK_PA3 0 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <1 RK_PD1 1 &pcfg_pull_up>, + <1 RK_PD0 1 &pcfg_pull_up>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = + <1 RK_PC6 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = + <1 RK_PC7 1 &pcfg_pull_none>; + }; + }; + + uart2-m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + <1 RK_PC7 2 &pcfg_pull_up>, + <1 RK_PC6 2 &pcfg_pull_up>; + }; + }; + + uart2-m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + <4 RK_PD3 2 &pcfg_pull_up>, + <4 RK_PD2 2 &pcfg_pull_up>; + }; + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = + <3 RK_PB5 4 &pcfg_pull_up>, + <3 RK_PB4 4 &pcfg_pull_up>; + }; + }; + + uart3-m1 { + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + <0 RK_PC2 3 &pcfg_pull_up>, + <0 RK_PC1 3 &pcfg_pull_up>; + }; + }; + + uart4 { + + uart4_xfer: uart4-xfer { + rockchip,pins = + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB0 1 &pcfg_pull_up>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = + <4 RK_PA6 1 &pcfg_pull_none>; + + }; + + uart4_rts: uart4-rts { + rockchip,pins = + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + uart4_rts_gpio: uart4-rts-gpio { + rockchip,pins = + <4 RK_PA7 0 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_4ma>; + }; + + spi0_csn0: spi0-csn0 { + rockchip,pins = + <2 RK_PA3 2 &pcfg_pull_up_4ma>; + }; + + spi0_miso: spi0-miso { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_4ma>; + }; + + spi0_mosi: spi0-mosi { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_4ma>; + }; + + spi0_clk_hs: spi0-clk-hs { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_8ma>; + }; + + spi0_miso_hs: spi0-miso-hs { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + spi0_mosi_hs: spi0-mosi-hs { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_8ma>; + }; + + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_4ma>; + }; + + spi1_csn0: spi1-csn0 { + rockchip,pins = + <3 RK_PB5 3 &pcfg_pull_up_4ma>; + }; + + spi1_miso: spi1-miso { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_4ma>; + }; + + spi1_mosi: spi1-mosi { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_4ma>; + }; + + spi1_clk_hs: spi1-clk-hs { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_8ma>; + }; + + spi1_miso_hs: spi1-miso-hs { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_8ma>; + }; + + spi1_mosi_hs: spi1-mosi-hs { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_8ma>; + }; + }; + + spi1-m1 { + spi1m1_miso: spi1m1-miso { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_mosi: spi1m1-mosi { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_clk: spi1m1-clk { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_csn0: spi1m1-csn0 { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_miso_hs: spi1m1-miso-hs { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_mosi_hs: spi1m1-mosi-hs { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_clk_hs: spi1m1-clk-hs { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_csn0_hs: spi1m1-csn0-hs { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_8ma>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_4ma>; + }; + + spi2_csn0: spi2-csn0 { + rockchip,pins = + <1 RK_PD1 3 &pcfg_pull_up_4ma>; + }; + + spi2_miso: spi2-miso { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_4ma>; + }; + + spi2_mosi: spi2-mosi { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_4ma>; + }; + + spi2_clk_hs: spi2-clk-hs { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_8ma>; + }; + + spi2_miso_hs: spi2-miso-hs { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_8ma>; + }; + + spi2_mosi_hs: spi2-mosi-hs { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_8ma>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 RK_PD5 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 RK_PD4 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_det: sdmmc-det { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = + <4 RK_PD6 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>, + <4 RK_PD1 1 &pcfg_pull_up_4ma>, + <4 RK_PD2 1 &pcfg_pull_up_4ma>, + <4 RK_PD3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_gpio: sdmmc-gpio { + rockchip,pins = + <4 RK_PD0 0 &pcfg_pull_up_4ma>, + <4 RK_PD1 0 &pcfg_pull_up_4ma>, + <4 RK_PD2 0 &pcfg_pull_up_4ma>, + <4 RK_PD3 0 &pcfg_pull_up_4ma>, + <4 RK_PD4 0 &pcfg_pull_up_4ma>, + <4 RK_PD5 0 &pcfg_pull_up_4ma>, + <4 RK_PD6 0 &pcfg_pull_up_4ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = + <4 RK_PA5 1 &pcfg_pull_none_8ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = + <4 RK_PA4 1 &pcfg_pull_up_8ma>; + }; + + sdio_pwren: sdio-pwren { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_none_8ma>; + }; + + sdio_wrpt: sdio-wrpt { + rockchip,pins = + <0 RK_PA1 1 &pcfg_pull_none_8ma>; + }; + + sdio_intn: sdio-intn { + rockchip,pins = + <0 RK_PA0 1 &pcfg_pull_none_8ma>; + }; + + sdio_bus1: sdio-bus1 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>, + <4 RK_PA1 1 &pcfg_pull_up_8ma>, + <4 RK_PA2 1 &pcfg_pull_up_8ma>, + <4 RK_PA3 1 &pcfg_pull_up_8ma>; + }; + + sdio_gpio: sdio-gpio { + rockchip,pins = + <4 RK_PA0 0 &pcfg_pull_up_4ma>, + <4 RK_PA1 0 &pcfg_pull_up_4ma>, + <4 RK_PA2 0 &pcfg_pull_up_4ma>, + <4 RK_PA3 0 &pcfg_pull_up_4ma>, + <4 RK_PA4 0 &pcfg_pull_up_4ma>, + <4 RK_PA5 0 &pcfg_pull_up_4ma>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = + <3 RK_PB1 2 &pcfg_pull_none_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_up_8ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>; + }; + + emmc_rstn: emmc-rstn { + rockchip,pins = + <3 RK_PB2 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>, + <3 RK_PA4 2 &pcfg_pull_up_8ma>, + <3 RK_PA5 2 &pcfg_pull_up_8ma>, + <3 RK_PA6 2 &pcfg_pull_up_8ma>, + <3 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + }; + + flash { + flash_csn0: flash-csn0 { + rockchip,pins = + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = + <3 RK_PB4 1 &pcfg_pull_none>; + }; + + flash_ale: flash-ale { + rockchip,pins = + <3 RK_PB3 1 &pcfg_pull_none>; + }; + + flash_cle: flash-cle { + rockchip,pins = + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = + <3 RK_PB0 1 &pcfg_pull_none>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = + <3 RK_PB2 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = + <3 RK_PA0 1 &pcfg_pull_up_12ma>, + <3 RK_PA1 1 &pcfg_pull_up_12ma>, + <3 RK_PA2 1 &pcfg_pull_up_12ma>, + <3 RK_PA3 1 &pcfg_pull_up_12ma>, + <3 RK_PA4 1 &pcfg_pull_up_12ma>, + <3 RK_PA5 1 &pcfg_pull_up_12ma>, + <3 RK_PA6 1 &pcfg_pull_up_12ma>, + <3 RK_PA7 1 &pcfg_pull_up_12ma>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_down>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + pwm1_pin_pull_down: pwm1-pin-pull-down { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_down>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_down>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_none>; + }; + + pwm3_pin_pull_down: pwm3-pin-pull-down { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_down>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_none>; + }; + + pwm4_pin_pull_down: pwm4-pin-pull-down { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_down>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_none>; + }; + + pwm5_pin_pull_down: pwm5-pin-pull-down { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_down>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_none>; + }; + + pwm6_pin_pull_down: pwm6-pin-pull-down { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_down>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_none>; + }; + + pwm7_pin_pull_down: pwm7-pin-pull-down { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_down>; + }; + }; + + pwm8 { + pwm8_pin: pwm8-pin { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>; + }; + + pwm8_pin_pull_down: pwm8-pin-pull-down { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_down>; + }; + }; + + pwm9 { + pwm9_pin: pwm9-pin { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_none>; + }; + + pwm9_pin_pull_down: pwm9-pin-pull-down { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_down>; + }; + }; + + pwm10 { + pwm10_pin: pwm10-pin { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_none>; + }; + + pwm10_pin_pull_down: pwm10-pin-pull-down { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_down>; + }; + }; + + pwm11 { + pwm11_pin: pwm11-pin { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_none>; + }; + + pwm11_pin_pull_down: pwm11-pin-pull-down { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_down>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_txen */ + <1 RK_PC1 3 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <1 RK_PC3 3 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PC2 3 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <1 RK_PC4 3 &pcfg_pull_none>, + /* mac_rxd1 */ + <1 RK_PC5 3 &pcfg_pull_none>, + /* mac_rxer */ + <1 RK_PB7 3 &pcfg_pull_none>, + /* mac_rxdv */ + <1 RK_PC0 3 &pcfg_pull_none>, + /* mac_mdio */ + <1 RK_PB6 3 &pcfg_pull_none>, + /* mac_mdc */ + <1 RK_PB5 3 &pcfg_pull_none>; + }; + + mac_refclk_12ma: mac-refclk-12ma { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none_12ma>; + }; + + mac_refclk: mac-refclk { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none>; + }; + }; + + gmac-m1 { + rmiim1_pins: rmiim1-pins { + rockchip,pins = + /* mac_txen */ + <4 RK_PB7 2 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <4 RK_PA5 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <4 RK_PA4 2 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <4 RK_PA2 2 &pcfg_pull_none>, + /* mac_rxd1 */ + <4 RK_PA3 2 &pcfg_pull_none>, + /* mac_rxer */ + <4 RK_PA0 2 &pcfg_pull_none>, + /* mac_rxdv */ + <4 RK_PA1 2 &pcfg_pull_none>, + /* mac_mdio */ + <4 RK_PB6 2 &pcfg_pull_none>, + /* mac_mdc */ + <4 RK_PB5 2 &pcfg_pull_none>; + }; + + macm1_refclk_12ma: macm1-refclk-12ma { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none_12ma>; + }; + + macm1_refclk: macm1-refclk { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none>; + }; + }; + + rtc { + rtc_32k: rtc-32k { + rockchip,pins = + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + }; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC @ 2019-10-17 3:04 ` Andy Yan 0 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:04 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: linux-kernel, linux-arm-kernel, obh+dt, devicetree, Andy Yan RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. This patch add basic core dtsi file for it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> --- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 1875 ++++++++++++++++++++++ 1 file changed, 1875 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi new file mode 100644 index 000000000000..cda63ffb0d2f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -0,0 +1,1875 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +#include <dt-bindings/clock/rk3308-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3308"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &mac; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000 1025000 1340000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1125000 1125000 1340000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + mac_clkin: external-mac-clock { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "mac_clkin"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + ramoops_mem: ramoops_mem { + reg = <0x0 0x110000 0x0 0xf0000>; + reg-names = "ramoops_mem"; + }; + + ramoops: ramoops { + compatible = "ramoops"; + record-size = <0x0 0x30000>; + console-size = <0x0 0xc0000>; + ftrace-size = <0x0 0x00000>; + pmsg-size = <0x0 0x00000>; + memory-region = <&ramoops_mem>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + grf: grf@ff000000 { + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff000000 0x0 0x10000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x500>; + mode-bootloader = <BOOT_BL_DOWNLOAD>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-fastboot = <BOOT_FASTBOOT>; + }; + }; + + detect_grf: syscon@ff00b000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff00b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + core_grf: syscon@ff00c000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff00c000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + }; + + i2c0: i2c@ff040000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff040000 0x0 0x1000>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff050000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff050000 0x0 0x1000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff060000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff060000 0x0 0x1000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff070000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff070000 0x0 0x1000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@ff080000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff080000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0a0000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + uart1: serial@ff0b0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0b0000 0x0 0x100>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + status = "disabled"; + }; + + uart2: serial@ff0c0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0c0000 0x0 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart3: serial@ff0d0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0d0000 0x0 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + uart4: serial@ff0e0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0e0000 0x0 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>; + status = "disabled"; + }; + + spi0: spi@ff120000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff120000 0x0 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; + status = "disabled"; + }; + + spi1: spi@ff130000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff130000 0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>; + pinctrl-1 = <&spi1_clk_hs &spi1_csn0 &spi1_miso_hs &spi1_mosi_hs>; + status = "disabled"; + }; + + spi2: spi@ff140000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff140000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 16>, <&dmac1 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>; + pinctrl-1 = <&spi2_clk_hs &spi2_csn0 &spi2_miso_hs &spi2_mosi_hs>; + status = "disabled"; + }; + + pwm8: pwm@ff160000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm8_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm9: pwm@ff160010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm9_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm10: pwm@ff160020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm10_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm11: pwm@ff160030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm11_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm4: pwm@ff170000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm5: pwm@ff170010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm6: pwm@ff170020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm7: pwm@ff170030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm0: pwm@ff180000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm1: pwm@ff180010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm2: pwm@ff180020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm3: pwm@ff180030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + rktimer: rktimer@ff1a0000 { + compatible = "rockchip,rk3288-timer"; + reg = <0x0 0xff1a0000 0x0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + saradc: saradc@ff1e0000 { + compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff1e0000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac0: dma-controller@ff2c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + peripherals-req-type-burst; + }; + + dmac1: dma-controller@ff2d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2d0000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + peripherals-req-type-burst; + }; + }; + + i2s_2ch_0: i2s@ff350000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff350000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 8>, <&dmac1 9>; + dma-names = "tx", "rx"; + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; + reset-names = "reset-m", "reset-h"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_2ch_0_sclk + &i2s_2ch_0_lrck + &i2s_2ch_0_sdi + &i2s_2ch_0_sdo>; + status = "disabled"; + }; + + i2s_2ch_1: i2s@ff360000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff360000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 11>; + dma-names = "rx"; + resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; + reset-names = "reset-m", "reset-h"; + status = "disabled"; + }; + + spdif_tx: spdif-tx@ff3a0000 { + compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif"; + reg = <0x0 0xff3a0000 0x0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_out>; + status = "disabled"; + }; + + sdmmc: dwmmc@ff480000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff480000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <4>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + status = "disabled"; + }; + + emmc: dwmmc@ff490000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff490000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <8>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdio: dwmmc@ff4a0000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff4a0000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <4>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>; + status = "disabled"; + }; + + mac: ethernet@ff4e0000 { + compatible = "rockchip,rk3308-mac"; + reg = <0x0 0xff4e0000 0x0 0x10000>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, + <&cru SCLK_MAC>, <&cru ACLK_MAC>, + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac", "clk_mac_speed"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; + resets = <&cru SRST_MAC_A>; + reset-names = "stmmaceth"; + status = "disabled"; + }; + + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0x0 0xff500000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + + assigned-clocks = <&cru SCLK_RTC32K>; + assigned-clock-rates = <32768>; + }; + + gic: interrupt-controller@ff580000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + + reg = <0x0 0xff581000 0x0 0x1000>, + <0x0 0xff582000 0x0 0x2000>, + <0x0 0xff584000 0x0 0x2000>, + <0x0 0xff586000 0x0 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + sram: sram@fff80000 { + compatible = "mmio-sram"; + reg = <0x0 0xfff80000 0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xfff80000 0x40000>; + /* reserved for ddr dvfs and system suspend/resume */ + ddr-sram@0 { + reg = <0x0 0x8000>; + }; + /* reserved for vad audio buffer */ + vad_sram: vad-sram@8000 { + reg = <0x8000 0x38000>; + }; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3308-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + gpio0: gpio0@ff220000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff220000 0x0 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff230000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff230000 0x0 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff240000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff240000 0x0 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff250000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff260000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <1 RK_PD0 2 &pcfg_pull_none_smt>, + <1 RK_PD1 2 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <0 RK_PB3 1 &pcfg_pull_none_smt>, + <0 RK_PB4 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PA2 3 &pcfg_pull_none_smt>, + <2 RK_PA3 3 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m0 { + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + <0 RK_PB7 2 &pcfg_pull_none_smt>, + <0 RK_PC0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m1 { + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_none_smt>, + <3 RK_PB5 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m2 { + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + <2 RK_PA1 3 &pcfg_pull_none_smt>, + <2 RK_PA0 3 &pcfg_pull_none_smt>; + }; + }; + + i2s_2ch_0 { + i2s_2ch_0_mclk: i2s-2ch-0-mclk { + rockchip,pins = + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sclk: i2s-2ch-0-sclk { + rockchip,pins = + <4 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_lrck: i2s-2ch-0-lrck { + rockchip,pins = + <4 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdo: i2s-2ch-0-sdo { + rockchip,pins = + <4 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdi: i2s-2ch-0-sdi { + rockchip,pins = + <4 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_0 { + i2s_8ch_0_mclk: i2s-8ch-0-mclk { + rockchip,pins = + <2 RK_PA4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclktx: i2s-8ch-0-sclktx { + rockchip,pins = + <2 RK_PA5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx { + rockchip,pins = + <2 RK_PA6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx { + rockchip,pins = + <2 RK_PA7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx { + rockchip,pins = + <2 RK_PB0 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 { + rockchip,pins = + <2 RK_PB1 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 { + rockchip,pins = + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 { + rockchip,pins = + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 { + rockchip,pins = + <2 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 { + rockchip,pins = + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 { + rockchip,pins = + <2 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m0 { + i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk { + rockchip,pins = + <1 RK_PA2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx { + rockchip,pins = + <1 RK_PA3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx { + rockchip,pins = + <1 RK_PA4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx { + rockchip,pins = + <1 RK_PA5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx { + rockchip,pins = + <1 RK_PA6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 { + rockchip,pins = + <1 RK_PA7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m1 { + i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk { + rockchip,pins = + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx { + rockchip,pins = + <1 RK_PB5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx { + rockchip,pins = + <1 RK_PB6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx { + rockchip,pins = + <1 RK_PB7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx { + rockchip,pins = + <1 RK_PC0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 { + rockchip,pins = + <1 RK_PC1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 { + rockchip,pins = + <1 RK_PC2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 { + rockchip,pins = + <1 RK_PC3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 { + rockchip,pins = + <1 RK_PC4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 2 &pcfg_pull_none>; + }; + }; + + pdm_m0 { + pdm_m0_clk: pdm-m0-clk { + rockchip,pins = + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi0: pdm-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi1: pdm-m0-sdi1 { + rockchip,pins = + <1 RK_PB2 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi2: pdm-m0-sdi2 { + rockchip,pins = + <1 RK_PB1 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi3: pdm-m0-sdi3 { + rockchip,pins = + <1 RK_PB0 3 &pcfg_pull_none>; + }; + }; + + pdm_m1 { + pdm_m1_clk: pdm-m1-clk { + rockchip,pins = + <1 RK_PB6 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi0: pdm-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi1: pdm-m1-sdi1 { + rockchip,pins = + <1 RK_PC4 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi2: pdm-m1-sdi2 { + rockchip,pins = + <1 RK_PC3 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi3: pdm-m1-sdi3 { + rockchip,pins = + <1 RK_PC2 4 &pcfg_pull_none>; + }; + }; + + pdm_m2 { + pdm_m2_clkm: pdm-m2-clkm { + rockchip,pins = + <2 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m2_clk: pdm-m2-clk { + rockchip,pins = + <2 RK_PA6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi0: pdm-m2-sdi0 { + rockchip,pins = + <2 RK_PB5 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi1: pdm-m2-sdi1 { + rockchip,pins = + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi2: pdm-m2-sdi2 { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi3: pdm-m2-sdi3 { + rockchip,pins = + <2 RK_PC0 2 &pcfg_pull_none>; + }; + }; + + spdif_in { + spdif_in: spdif-in { + rockchip,pins = + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + spdif_out { + spdif_out: spdif-out { + rockchip,pins = + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + tsadc { + tsadc_otp_gpio: tsadc-otp-gpio { + rockchip,pins = + <0 RK_PB2 0 &pcfg_pull_none>; + }; + + tsadc_otp_out: tsadc-otp-out { + rockchip,pins = + <0 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <2 RK_PA1 1 &pcfg_pull_up>, + <2 RK_PA0 1 &pcfg_pull_up>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <2 RK_PA2 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <2 RK_PA3 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = + <2 RK_PA3 0 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <1 RK_PD1 1 &pcfg_pull_up>, + <1 RK_PD0 1 &pcfg_pull_up>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = + <1 RK_PC6 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = + <1 RK_PC7 1 &pcfg_pull_none>; + }; + }; + + uart2-m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + <1 RK_PC7 2 &pcfg_pull_up>, + <1 RK_PC6 2 &pcfg_pull_up>; + }; + }; + + uart2-m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + <4 RK_PD3 2 &pcfg_pull_up>, + <4 RK_PD2 2 &pcfg_pull_up>; + }; + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = + <3 RK_PB5 4 &pcfg_pull_up>, + <3 RK_PB4 4 &pcfg_pull_up>; + }; + }; + + uart3-m1 { + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + <0 RK_PC2 3 &pcfg_pull_up>, + <0 RK_PC1 3 &pcfg_pull_up>; + }; + }; + + uart4 { + + uart4_xfer: uart4-xfer { + rockchip,pins = + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB0 1 &pcfg_pull_up>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = + <4 RK_PA6 1 &pcfg_pull_none>; + + }; + + uart4_rts: uart4-rts { + rockchip,pins = + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + uart4_rts_gpio: uart4-rts-gpio { + rockchip,pins = + <4 RK_PA7 0 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_4ma>; + }; + + spi0_csn0: spi0-csn0 { + rockchip,pins = + <2 RK_PA3 2 &pcfg_pull_up_4ma>; + }; + + spi0_miso: spi0-miso { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_4ma>; + }; + + spi0_mosi: spi0-mosi { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_4ma>; + }; + + spi0_clk_hs: spi0-clk-hs { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_8ma>; + }; + + spi0_miso_hs: spi0-miso-hs { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + spi0_mosi_hs: spi0-mosi-hs { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_8ma>; + }; + + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_4ma>; + }; + + spi1_csn0: spi1-csn0 { + rockchip,pins = + <3 RK_PB5 3 &pcfg_pull_up_4ma>; + }; + + spi1_miso: spi1-miso { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_4ma>; + }; + + spi1_mosi: spi1-mosi { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_4ma>; + }; + + spi1_clk_hs: spi1-clk-hs { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_8ma>; + }; + + spi1_miso_hs: spi1-miso-hs { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_8ma>; + }; + + spi1_mosi_hs: spi1-mosi-hs { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_8ma>; + }; + }; + + spi1-m1 { + spi1m1_miso: spi1m1-miso { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_mosi: spi1m1-mosi { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_clk: spi1m1-clk { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_csn0: spi1m1-csn0 { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_miso_hs: spi1m1-miso-hs { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_mosi_hs: spi1m1-mosi-hs { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_clk_hs: spi1m1-clk-hs { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_csn0_hs: spi1m1-csn0-hs { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_8ma>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_4ma>; + }; + + spi2_csn0: spi2-csn0 { + rockchip,pins = + <1 RK_PD1 3 &pcfg_pull_up_4ma>; + }; + + spi2_miso: spi2-miso { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_4ma>; + }; + + spi2_mosi: spi2-mosi { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_4ma>; + }; + + spi2_clk_hs: spi2-clk-hs { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_8ma>; + }; + + spi2_miso_hs: spi2-miso-hs { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_8ma>; + }; + + spi2_mosi_hs: spi2-mosi-hs { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_8ma>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 RK_PD5 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 RK_PD4 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_det: sdmmc-det { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = + <4 RK_PD6 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>, + <4 RK_PD1 1 &pcfg_pull_up_4ma>, + <4 RK_PD2 1 &pcfg_pull_up_4ma>, + <4 RK_PD3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_gpio: sdmmc-gpio { + rockchip,pins = + <4 RK_PD0 0 &pcfg_pull_up_4ma>, + <4 RK_PD1 0 &pcfg_pull_up_4ma>, + <4 RK_PD2 0 &pcfg_pull_up_4ma>, + <4 RK_PD3 0 &pcfg_pull_up_4ma>, + <4 RK_PD4 0 &pcfg_pull_up_4ma>, + <4 RK_PD5 0 &pcfg_pull_up_4ma>, + <4 RK_PD6 0 &pcfg_pull_up_4ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = + <4 RK_PA5 1 &pcfg_pull_none_8ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = + <4 RK_PA4 1 &pcfg_pull_up_8ma>; + }; + + sdio_pwren: sdio-pwren { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_none_8ma>; + }; + + sdio_wrpt: sdio-wrpt { + rockchip,pins = + <0 RK_PA1 1 &pcfg_pull_none_8ma>; + }; + + sdio_intn: sdio-intn { + rockchip,pins = + <0 RK_PA0 1 &pcfg_pull_none_8ma>; + }; + + sdio_bus1: sdio-bus1 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>, + <4 RK_PA1 1 &pcfg_pull_up_8ma>, + <4 RK_PA2 1 &pcfg_pull_up_8ma>, + <4 RK_PA3 1 &pcfg_pull_up_8ma>; + }; + + sdio_gpio: sdio-gpio { + rockchip,pins = + <4 RK_PA0 0 &pcfg_pull_up_4ma>, + <4 RK_PA1 0 &pcfg_pull_up_4ma>, + <4 RK_PA2 0 &pcfg_pull_up_4ma>, + <4 RK_PA3 0 &pcfg_pull_up_4ma>, + <4 RK_PA4 0 &pcfg_pull_up_4ma>, + <4 RK_PA5 0 &pcfg_pull_up_4ma>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = + <3 RK_PB1 2 &pcfg_pull_none_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_up_8ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>; + }; + + emmc_rstn: emmc-rstn { + rockchip,pins = + <3 RK_PB2 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>, + <3 RK_PA4 2 &pcfg_pull_up_8ma>, + <3 RK_PA5 2 &pcfg_pull_up_8ma>, + <3 RK_PA6 2 &pcfg_pull_up_8ma>, + <3 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + }; + + flash { + flash_csn0: flash-csn0 { + rockchip,pins = + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = + <3 RK_PB4 1 &pcfg_pull_none>; + }; + + flash_ale: flash-ale { + rockchip,pins = + <3 RK_PB3 1 &pcfg_pull_none>; + }; + + flash_cle: flash-cle { + rockchip,pins = + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = + <3 RK_PB0 1 &pcfg_pull_none>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = + <3 RK_PB2 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = + <3 RK_PA0 1 &pcfg_pull_up_12ma>, + <3 RK_PA1 1 &pcfg_pull_up_12ma>, + <3 RK_PA2 1 &pcfg_pull_up_12ma>, + <3 RK_PA3 1 &pcfg_pull_up_12ma>, + <3 RK_PA4 1 &pcfg_pull_up_12ma>, + <3 RK_PA5 1 &pcfg_pull_up_12ma>, + <3 RK_PA6 1 &pcfg_pull_up_12ma>, + <3 RK_PA7 1 &pcfg_pull_up_12ma>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_down>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + pwm1_pin_pull_down: pwm1-pin-pull-down { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_down>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_down>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_none>; + }; + + pwm3_pin_pull_down: pwm3-pin-pull-down { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_down>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_none>; + }; + + pwm4_pin_pull_down: pwm4-pin-pull-down { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_down>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_none>; + }; + + pwm5_pin_pull_down: pwm5-pin-pull-down { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_down>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_none>; + }; + + pwm6_pin_pull_down: pwm6-pin-pull-down { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_down>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_none>; + }; + + pwm7_pin_pull_down: pwm7-pin-pull-down { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_down>; + }; + }; + + pwm8 { + pwm8_pin: pwm8-pin { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>; + }; + + pwm8_pin_pull_down: pwm8-pin-pull-down { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_down>; + }; + }; + + pwm9 { + pwm9_pin: pwm9-pin { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_none>; + }; + + pwm9_pin_pull_down: pwm9-pin-pull-down { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_down>; + }; + }; + + pwm10 { + pwm10_pin: pwm10-pin { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_none>; + }; + + pwm10_pin_pull_down: pwm10-pin-pull-down { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_down>; + }; + }; + + pwm11 { + pwm11_pin: pwm11-pin { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_none>; + }; + + pwm11_pin_pull_down: pwm11-pin-pull-down { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_down>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_txen */ + <1 RK_PC1 3 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <1 RK_PC3 3 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PC2 3 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <1 RK_PC4 3 &pcfg_pull_none>, + /* mac_rxd1 */ + <1 RK_PC5 3 &pcfg_pull_none>, + /* mac_rxer */ + <1 RK_PB7 3 &pcfg_pull_none>, + /* mac_rxdv */ + <1 RK_PC0 3 &pcfg_pull_none>, + /* mac_mdio */ + <1 RK_PB6 3 &pcfg_pull_none>, + /* mac_mdc */ + <1 RK_PB5 3 &pcfg_pull_none>; + }; + + mac_refclk_12ma: mac-refclk-12ma { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none_12ma>; + }; + + mac_refclk: mac-refclk { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none>; + }; + }; + + gmac-m1 { + rmiim1_pins: rmiim1-pins { + rockchip,pins = + /* mac_txen */ + <4 RK_PB7 2 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <4 RK_PA5 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <4 RK_PA4 2 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <4 RK_PA2 2 &pcfg_pull_none>, + /* mac_rxd1 */ + <4 RK_PA3 2 &pcfg_pull_none>, + /* mac_rxer */ + <4 RK_PA0 2 &pcfg_pull_none>, + /* mac_rxdv */ + <4 RK_PA1 2 &pcfg_pull_none>, + /* mac_mdio */ + <4 RK_PB6 2 &pcfg_pull_none>, + /* mac_mdc */ + <4 RK_PB5 2 &pcfg_pull_none>; + }; + + macm1_refclk_12ma: macm1-refclk-12ma { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none_12ma>; + }; + + macm1_refclk: macm1-refclk { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none>; + }; + }; + + rtc { + rtc_32k: rtc-32k { + rockchip,pins = + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + }; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC @ 2019-10-17 3:04 ` Andy Yan 0 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:04 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: devicetree, obh+dt, linux-kernel, linux-arm-kernel, Andy Yan RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. This patch add basic core dtsi file for it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> --- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 1875 ++++++++++++++++++++++ 1 file changed, 1875 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi new file mode 100644 index 000000000000..cda63ffb0d2f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -0,0 +1,1875 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +#include <dt-bindings/clock/rk3308-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3308"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &mac; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000 1025000 1340000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1125000 1125000 1340000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + mac_clkin: external-mac-clock { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "mac_clkin"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + ramoops_mem: ramoops_mem { + reg = <0x0 0x110000 0x0 0xf0000>; + reg-names = "ramoops_mem"; + }; + + ramoops: ramoops { + compatible = "ramoops"; + record-size = <0x0 0x30000>; + console-size = <0x0 0xc0000>; + ftrace-size = <0x0 0x00000>; + pmsg-size = <0x0 0x00000>; + memory-region = <&ramoops_mem>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + grf: grf@ff000000 { + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff000000 0x0 0x10000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x500>; + mode-bootloader = <BOOT_BL_DOWNLOAD>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-fastboot = <BOOT_FASTBOOT>; + }; + }; + + detect_grf: syscon@ff00b000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff00b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + core_grf: syscon@ff00c000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff00c000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + }; + + i2c0: i2c@ff040000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff040000 0x0 0x1000>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff050000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff050000 0x0 0x1000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff060000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff060000 0x0 0x1000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff070000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff070000 0x0 0x1000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@ff080000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff080000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0a0000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + uart1: serial@ff0b0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0b0000 0x0 0x100>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + status = "disabled"; + }; + + uart2: serial@ff0c0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0c0000 0x0 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart3: serial@ff0d0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0d0000 0x0 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + uart4: serial@ff0e0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0e0000 0x0 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>; + status = "disabled"; + }; + + spi0: spi@ff120000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff120000 0x0 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; + status = "disabled"; + }; + + spi1: spi@ff130000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff130000 0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>; + pinctrl-1 = <&spi1_clk_hs &spi1_csn0 &spi1_miso_hs &spi1_mosi_hs>; + status = "disabled"; + }; + + spi2: spi@ff140000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff140000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 16>, <&dmac1 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "high_speed"; + pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>; + pinctrl-1 = <&spi2_clk_hs &spi2_csn0 &spi2_miso_hs &spi2_mosi_hs>; + status = "disabled"; + }; + + pwm8: pwm@ff160000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm8_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm9: pwm@ff160010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm9_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm10: pwm@ff160020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm10_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm11: pwm@ff160030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm11_pin>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm4: pwm@ff170000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm5: pwm@ff170010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm6: pwm@ff170020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm7: pwm@ff170030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm0: pwm@ff180000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm1: pwm@ff180010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm2: pwm@ff180020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm3: pwm@ff180030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + rktimer: rktimer@ff1a0000 { + compatible = "rockchip,rk3288-timer"; + reg = <0x0 0xff1a0000 0x0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + saradc: saradc@ff1e0000 { + compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff1e0000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac0: dma-controller@ff2c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + peripherals-req-type-burst; + }; + + dmac1: dma-controller@ff2d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2d0000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + peripherals-req-type-burst; + }; + }; + + i2s_2ch_0: i2s@ff350000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff350000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 8>, <&dmac1 9>; + dma-names = "tx", "rx"; + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; + reset-names = "reset-m", "reset-h"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_2ch_0_sclk + &i2s_2ch_0_lrck + &i2s_2ch_0_sdi + &i2s_2ch_0_sdo>; + status = "disabled"; + }; + + i2s_2ch_1: i2s@ff360000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff360000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 11>; + dma-names = "rx"; + resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; + reset-names = "reset-m", "reset-h"; + status = "disabled"; + }; + + spdif_tx: spdif-tx@ff3a0000 { + compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif"; + reg = <0x0 0xff3a0000 0x0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_out>; + status = "disabled"; + }; + + sdmmc: dwmmc@ff480000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff480000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <4>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + status = "disabled"; + }; + + emmc: dwmmc@ff490000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff490000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <8>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdio: dwmmc@ff4a0000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff4a0000 0x0 0x4000>; + max-frequency = <150000000>; + bus-width = <4>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>; + status = "disabled"; + }; + + mac: ethernet@ff4e0000 { + compatible = "rockchip,rk3308-mac"; + reg = <0x0 0xff4e0000 0x0 0x10000>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, + <&cru SCLK_MAC>, <&cru ACLK_MAC>, + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac", "clk_mac_speed"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; + resets = <&cru SRST_MAC_A>; + reset-names = "stmmaceth"; + status = "disabled"; + }; + + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0x0 0xff500000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + + assigned-clocks = <&cru SCLK_RTC32K>; + assigned-clock-rates = <32768>; + }; + + gic: interrupt-controller@ff580000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + + reg = <0x0 0xff581000 0x0 0x1000>, + <0x0 0xff582000 0x0 0x2000>, + <0x0 0xff584000 0x0 0x2000>, + <0x0 0xff586000 0x0 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + sram: sram@fff80000 { + compatible = "mmio-sram"; + reg = <0x0 0xfff80000 0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xfff80000 0x40000>; + /* reserved for ddr dvfs and system suspend/resume */ + ddr-sram@0 { + reg = <0x0 0x8000>; + }; + /* reserved for vad audio buffer */ + vad_sram: vad-sram@8000 { + reg = <0x8000 0x38000>; + }; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3308-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + gpio0: gpio0@ff220000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff220000 0x0 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff230000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff230000 0x0 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff240000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff240000 0x0 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff250000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff260000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <1 RK_PD0 2 &pcfg_pull_none_smt>, + <1 RK_PD1 2 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <0 RK_PB3 1 &pcfg_pull_none_smt>, + <0 RK_PB4 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PA2 3 &pcfg_pull_none_smt>, + <2 RK_PA3 3 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m0 { + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + <0 RK_PB7 2 &pcfg_pull_none_smt>, + <0 RK_PC0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m1 { + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_none_smt>, + <3 RK_PB5 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m2 { + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + <2 RK_PA1 3 &pcfg_pull_none_smt>, + <2 RK_PA0 3 &pcfg_pull_none_smt>; + }; + }; + + i2s_2ch_0 { + i2s_2ch_0_mclk: i2s-2ch-0-mclk { + rockchip,pins = + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sclk: i2s-2ch-0-sclk { + rockchip,pins = + <4 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_lrck: i2s-2ch-0-lrck { + rockchip,pins = + <4 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdo: i2s-2ch-0-sdo { + rockchip,pins = + <4 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdi: i2s-2ch-0-sdi { + rockchip,pins = + <4 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_0 { + i2s_8ch_0_mclk: i2s-8ch-0-mclk { + rockchip,pins = + <2 RK_PA4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclktx: i2s-8ch-0-sclktx { + rockchip,pins = + <2 RK_PA5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx { + rockchip,pins = + <2 RK_PA6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx { + rockchip,pins = + <2 RK_PA7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx { + rockchip,pins = + <2 RK_PB0 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 { + rockchip,pins = + <2 RK_PB1 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 { + rockchip,pins = + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 { + rockchip,pins = + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 { + rockchip,pins = + <2 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 { + rockchip,pins = + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 { + rockchip,pins = + <2 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m0 { + i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk { + rockchip,pins = + <1 RK_PA2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx { + rockchip,pins = + <1 RK_PA3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx { + rockchip,pins = + <1 RK_PA4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx { + rockchip,pins = + <1 RK_PA5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx { + rockchip,pins = + <1 RK_PA6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 { + rockchip,pins = + <1 RK_PA7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m1 { + i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk { + rockchip,pins = + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx { + rockchip,pins = + <1 RK_PB5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx { + rockchip,pins = + <1 RK_PB6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx { + rockchip,pins = + <1 RK_PB7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx { + rockchip,pins = + <1 RK_PC0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 { + rockchip,pins = + <1 RK_PC1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 { + rockchip,pins = + <1 RK_PC2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 { + rockchip,pins = + <1 RK_PC3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 { + rockchip,pins = + <1 RK_PC4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 2 &pcfg_pull_none>; + }; + }; + + pdm_m0 { + pdm_m0_clk: pdm-m0-clk { + rockchip,pins = + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi0: pdm-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi1: pdm-m0-sdi1 { + rockchip,pins = + <1 RK_PB2 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi2: pdm-m0-sdi2 { + rockchip,pins = + <1 RK_PB1 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi3: pdm-m0-sdi3 { + rockchip,pins = + <1 RK_PB0 3 &pcfg_pull_none>; + }; + }; + + pdm_m1 { + pdm_m1_clk: pdm-m1-clk { + rockchip,pins = + <1 RK_PB6 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi0: pdm-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi1: pdm-m1-sdi1 { + rockchip,pins = + <1 RK_PC4 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi2: pdm-m1-sdi2 { + rockchip,pins = + <1 RK_PC3 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi3: pdm-m1-sdi3 { + rockchip,pins = + <1 RK_PC2 4 &pcfg_pull_none>; + }; + }; + + pdm_m2 { + pdm_m2_clkm: pdm-m2-clkm { + rockchip,pins = + <2 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m2_clk: pdm-m2-clk { + rockchip,pins = + <2 RK_PA6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi0: pdm-m2-sdi0 { + rockchip,pins = + <2 RK_PB5 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi1: pdm-m2-sdi1 { + rockchip,pins = + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi2: pdm-m2-sdi2 { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi3: pdm-m2-sdi3 { + rockchip,pins = + <2 RK_PC0 2 &pcfg_pull_none>; + }; + }; + + spdif_in { + spdif_in: spdif-in { + rockchip,pins = + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + spdif_out { + spdif_out: spdif-out { + rockchip,pins = + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + tsadc { + tsadc_otp_gpio: tsadc-otp-gpio { + rockchip,pins = + <0 RK_PB2 0 &pcfg_pull_none>; + }; + + tsadc_otp_out: tsadc-otp-out { + rockchip,pins = + <0 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <2 RK_PA1 1 &pcfg_pull_up>, + <2 RK_PA0 1 &pcfg_pull_up>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <2 RK_PA2 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <2 RK_PA3 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = + <2 RK_PA3 0 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <1 RK_PD1 1 &pcfg_pull_up>, + <1 RK_PD0 1 &pcfg_pull_up>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = + <1 RK_PC6 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = + <1 RK_PC7 1 &pcfg_pull_none>; + }; + }; + + uart2-m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + <1 RK_PC7 2 &pcfg_pull_up>, + <1 RK_PC6 2 &pcfg_pull_up>; + }; + }; + + uart2-m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + <4 RK_PD3 2 &pcfg_pull_up>, + <4 RK_PD2 2 &pcfg_pull_up>; + }; + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = + <3 RK_PB5 4 &pcfg_pull_up>, + <3 RK_PB4 4 &pcfg_pull_up>; + }; + }; + + uart3-m1 { + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + <0 RK_PC2 3 &pcfg_pull_up>, + <0 RK_PC1 3 &pcfg_pull_up>; + }; + }; + + uart4 { + + uart4_xfer: uart4-xfer { + rockchip,pins = + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB0 1 &pcfg_pull_up>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = + <4 RK_PA6 1 &pcfg_pull_none>; + + }; + + uart4_rts: uart4-rts { + rockchip,pins = + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + uart4_rts_gpio: uart4-rts-gpio { + rockchip,pins = + <4 RK_PA7 0 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_4ma>; + }; + + spi0_csn0: spi0-csn0 { + rockchip,pins = + <2 RK_PA3 2 &pcfg_pull_up_4ma>; + }; + + spi0_miso: spi0-miso { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_4ma>; + }; + + spi0_mosi: spi0-mosi { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_4ma>; + }; + + spi0_clk_hs: spi0-clk-hs { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_8ma>; + }; + + spi0_miso_hs: spi0-miso-hs { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + spi0_mosi_hs: spi0-mosi-hs { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_8ma>; + }; + + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_4ma>; + }; + + spi1_csn0: spi1-csn0 { + rockchip,pins = + <3 RK_PB5 3 &pcfg_pull_up_4ma>; + }; + + spi1_miso: spi1-miso { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_4ma>; + }; + + spi1_mosi: spi1-mosi { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_4ma>; + }; + + spi1_clk_hs: spi1-clk-hs { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_8ma>; + }; + + spi1_miso_hs: spi1-miso-hs { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_8ma>; + }; + + spi1_mosi_hs: spi1-mosi-hs { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_8ma>; + }; + }; + + spi1-m1 { + spi1m1_miso: spi1m1-miso { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_mosi: spi1m1-mosi { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_clk: spi1m1-clk { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_csn0: spi1m1-csn0 { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_miso_hs: spi1m1-miso-hs { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_mosi_hs: spi1m1-mosi-hs { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_clk_hs: spi1m1-clk-hs { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + + spi1m1_csn0_hs: spi1m1-csn0-hs { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_8ma>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_4ma>; + }; + + spi2_csn0: spi2-csn0 { + rockchip,pins = + <1 RK_PD1 3 &pcfg_pull_up_4ma>; + }; + + spi2_miso: spi2-miso { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_4ma>; + }; + + spi2_mosi: spi2-mosi { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_4ma>; + }; + + spi2_clk_hs: spi2-clk-hs { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_8ma>; + }; + + spi2_miso_hs: spi2-miso-hs { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_8ma>; + }; + + spi2_mosi_hs: spi2-mosi-hs { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_8ma>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 RK_PD5 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 RK_PD4 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_det: sdmmc-det { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = + <4 RK_PD6 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>, + <4 RK_PD1 1 &pcfg_pull_up_4ma>, + <4 RK_PD2 1 &pcfg_pull_up_4ma>, + <4 RK_PD3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_gpio: sdmmc-gpio { + rockchip,pins = + <4 RK_PD0 0 &pcfg_pull_up_4ma>, + <4 RK_PD1 0 &pcfg_pull_up_4ma>, + <4 RK_PD2 0 &pcfg_pull_up_4ma>, + <4 RK_PD3 0 &pcfg_pull_up_4ma>, + <4 RK_PD4 0 &pcfg_pull_up_4ma>, + <4 RK_PD5 0 &pcfg_pull_up_4ma>, + <4 RK_PD6 0 &pcfg_pull_up_4ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = + <4 RK_PA5 1 &pcfg_pull_none_8ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = + <4 RK_PA4 1 &pcfg_pull_up_8ma>; + }; + + sdio_pwren: sdio-pwren { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_none_8ma>; + }; + + sdio_wrpt: sdio-wrpt { + rockchip,pins = + <0 RK_PA1 1 &pcfg_pull_none_8ma>; + }; + + sdio_intn: sdio-intn { + rockchip,pins = + <0 RK_PA0 1 &pcfg_pull_none_8ma>; + }; + + sdio_bus1: sdio-bus1 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>, + <4 RK_PA1 1 &pcfg_pull_up_8ma>, + <4 RK_PA2 1 &pcfg_pull_up_8ma>, + <4 RK_PA3 1 &pcfg_pull_up_8ma>; + }; + + sdio_gpio: sdio-gpio { + rockchip,pins = + <4 RK_PA0 0 &pcfg_pull_up_4ma>, + <4 RK_PA1 0 &pcfg_pull_up_4ma>, + <4 RK_PA2 0 &pcfg_pull_up_4ma>, + <4 RK_PA3 0 &pcfg_pull_up_4ma>, + <4 RK_PA4 0 &pcfg_pull_up_4ma>, + <4 RK_PA5 0 &pcfg_pull_up_4ma>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = + <3 RK_PB1 2 &pcfg_pull_none_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_up_8ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>; + }; + + emmc_rstn: emmc-rstn { + rockchip,pins = + <3 RK_PB2 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>, + <3 RK_PA4 2 &pcfg_pull_up_8ma>, + <3 RK_PA5 2 &pcfg_pull_up_8ma>, + <3 RK_PA6 2 &pcfg_pull_up_8ma>, + <3 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + }; + + flash { + flash_csn0: flash-csn0 { + rockchip,pins = + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = + <3 RK_PB4 1 &pcfg_pull_none>; + }; + + flash_ale: flash-ale { + rockchip,pins = + <3 RK_PB3 1 &pcfg_pull_none>; + }; + + flash_cle: flash-cle { + rockchip,pins = + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = + <3 RK_PB0 1 &pcfg_pull_none>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = + <3 RK_PB2 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = + <3 RK_PA0 1 &pcfg_pull_up_12ma>, + <3 RK_PA1 1 &pcfg_pull_up_12ma>, + <3 RK_PA2 1 &pcfg_pull_up_12ma>, + <3 RK_PA3 1 &pcfg_pull_up_12ma>, + <3 RK_PA4 1 &pcfg_pull_up_12ma>, + <3 RK_PA5 1 &pcfg_pull_up_12ma>, + <3 RK_PA6 1 &pcfg_pull_up_12ma>, + <3 RK_PA7 1 &pcfg_pull_up_12ma>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_down>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + pwm1_pin_pull_down: pwm1-pin-pull-down { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_down>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_down>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_none>; + }; + + pwm3_pin_pull_down: pwm3-pin-pull-down { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_down>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_none>; + }; + + pwm4_pin_pull_down: pwm4-pin-pull-down { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_down>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_none>; + }; + + pwm5_pin_pull_down: pwm5-pin-pull-down { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_down>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_none>; + }; + + pwm6_pin_pull_down: pwm6-pin-pull-down { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_down>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_none>; + }; + + pwm7_pin_pull_down: pwm7-pin-pull-down { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_down>; + }; + }; + + pwm8 { + pwm8_pin: pwm8-pin { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>; + }; + + pwm8_pin_pull_down: pwm8-pin-pull-down { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_down>; + }; + }; + + pwm9 { + pwm9_pin: pwm9-pin { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_none>; + }; + + pwm9_pin_pull_down: pwm9-pin-pull-down { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_down>; + }; + }; + + pwm10 { + pwm10_pin: pwm10-pin { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_none>; + }; + + pwm10_pin_pull_down: pwm10-pin-pull-down { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_down>; + }; + }; + + pwm11 { + pwm11_pin: pwm11-pin { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_none>; + }; + + pwm11_pin_pull_down: pwm11-pin-pull-down { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_down>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_txen */ + <1 RK_PC1 3 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <1 RK_PC3 3 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PC2 3 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <1 RK_PC4 3 &pcfg_pull_none>, + /* mac_rxd1 */ + <1 RK_PC5 3 &pcfg_pull_none>, + /* mac_rxer */ + <1 RK_PB7 3 &pcfg_pull_none>, + /* mac_rxdv */ + <1 RK_PC0 3 &pcfg_pull_none>, + /* mac_mdio */ + <1 RK_PB6 3 &pcfg_pull_none>, + /* mac_mdc */ + <1 RK_PB5 3 &pcfg_pull_none>; + }; + + mac_refclk_12ma: mac-refclk-12ma { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none_12ma>; + }; + + mac_refclk: mac-refclk { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none>; + }; + }; + + gmac-m1 { + rmiim1_pins: rmiim1-pins { + rockchip,pins = + /* mac_txen */ + <4 RK_PB7 2 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <4 RK_PA5 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <4 RK_PA4 2 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <4 RK_PA2 2 &pcfg_pull_none>, + /* mac_rxd1 */ + <4 RK_PA3 2 &pcfg_pull_none>, + /* mac_rxer */ + <4 RK_PA0 2 &pcfg_pull_none>, + /* mac_rxdv */ + <4 RK_PA1 2 &pcfg_pull_none>, + /* mac_mdio */ + <4 RK_PB6 2 &pcfg_pull_none>, + /* mac_mdc */ + <4 RK_PB5 2 &pcfg_pull_none>; + }; + + macm1_refclk_12ma: macm1-refclk-12ma { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none_12ma>; + }; + + macm1_refclk: macm1-refclk { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none>; + }; + }; + + rtc { + rtc_32k: rtc-32k { + rockchip,pins = + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + }; +}; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 16+ messages in thread
[parent not found: <20191017030449.32289-1-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>]
* Re: [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC 2019-10-17 3:04 ` Andy Yan (?) @ 2019-10-17 23:30 ` Heiko Stuebner -1 siblings, 0 replies; 16+ messages in thread From: Heiko Stuebner @ 2019-10-17 23:30 UTC (permalink / raw) To: Andy Yan Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kever.yang-TNX95d0MmH7DzftRWevZcw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Hi Andy, Am Donnerstag, 17. Oktober 2019, 05:04:49 CEST schrieb Andy Yan: > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; Please also provide a ATF implementation for the rk3308 :-) [Not a requirement for getting this merged, but it would be really cool to have sources for the full stack] > + > + ramoops_mem: ramoops_mem { > + reg = <0x0 0x110000 0x0 0xf0000>; > + reg-names = "ramoops_mem"; > + }; > + > + ramoops: ramoops { > + compatible = "ramoops"; > + record-size = <0x0 0x30000>; > + console-size = <0x0 0xc0000>; > + ftrace-size = <0x0 0x00000>; > + pmsg-size = <0x0 0x00000>; > + memory-region = <&ramoops_mem>; > + }; I think ramoops are more a per-board thing, like for the evb. As they'll require cooperation with bootloaders to not mangle that memory area. For this please also coordinate with Kever because I somehow remember we have u-boot sometimes at 0x100000. > + grf: grf@ff000000 { > + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; Please add a patch adding the rockchip,rk3308-grf compatible to Documentation/devicetree/bindings/soc/rockchip/grf.txt > + reg = <0x0 0xff000000 0x0 0x10000>; > + > + reboot-mode { > + compatible = "syscon-reboot-mode"; > + offset = <0x500>; > + mode-bootloader = <BOOT_BL_DOWNLOAD>; > + mode-loader = <BOOT_BL_DOWNLOAD>; > + mode-normal = <BOOT_NORMAL>; > + mode-recovery = <BOOT_RECOVERY>; > + mode-fastboot = <BOOT_FASTBOOT>; > + }; > + }; > + > + detect_grf: syscon@ff00b000 { > + compatible = "syscon", "simple-mfd"; compatible = "rockchip,rk3308-detect-grf", "syscon" + add the rk3308-detect-grf to the binding > + reg = <0x0 0xff00b000 0x0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + }; > + > + core_grf: syscon@ff00c000 { > + compatible = "syscon", "simple-mfd"; same as detect_grf > + reg = <0x0 0xff00c000 0x0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + }; > + > + i2c0: i2c@ff040000 { > + compatible = "rockchip,rk3399-i2c"; compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; Same for all i2c controllers. > + reg = <0x0 0xff040000 0x0 0x1000>; > + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; > + clock-names = "i2c", "pclk"; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_xfer>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + spi0: spi@ff120000 { > + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; > + reg = <0x0 0xff120000 0x0 0x1000>; > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; > + clock-names = "spiclk", "apb_pclk"; > + dmas = <&dmac0 0>, <&dmac0 1>; > + dma-names = "tx", "rx"; > + pinctrl-names = "default", "high_speed"; there is no high_speed pinctrl defined for the Rockchip spi driver in mainline, so this part should go away in a first step. Same for the other spi controllers. > + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; > + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; > + status = "disabled"; > + }; > + rktimer: rktimer@ff1a0000 { > + compatible = "rockchip,rk3288-timer"; compatible = "rockchip,rk3308-timer", "rockchip,rk3288-timer"; > + reg = <0x0 0xff1a0000 0x0 0x20>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; > + clock-names = "pclk", "timer"; > + }; > + amba { > + compatible = "arm,amba-bus"; compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + dmac0: dma-controller@ff2c0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0xff2c0000 0x0 0x4000>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + clocks = <&cru ACLK_DMAC0>; > + clock-names = "apb_pclk"; > + peripherals-req-type-burst; peripherals-req-type-burst is undocumented so likely some change to the dma driver not yet upstream? > + }; > + > + dmac1: dma-controller@ff2d0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0xff2d0000 0x0 0x4000>; > + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + clocks = <&cru ACLK_DMAC1>; > + clock-names = "apb_pclk"; > + peripherals-req-type-burst; > + }; > + }; > + > + i2s_2ch_0: i2s@ff350000 { > + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; > + reg = <0x0 0xff350000 0x0 0x1000>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; > + clock-names = "i2s_clk", "i2s_hclk"; > + dmas = <&dmac1 8>, <&dmac1 9>; > + dma-names = "tx", "rx"; > + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; > + reset-names = "reset-m", "reset-h"; These resets don't seem to be defined in driver or binding? Same for other i2s > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s_2ch_0_sclk > + &i2s_2ch_0_lrck > + &i2s_2ch_0_sdi > + &i2s_2ch_0_sdo>; > + status = "disabled"; > + }; > + > + mac: ethernet@ff4e0000 { > + compatible = "rockchip,rk3308-mac"; Was this support to the network driver already submitted? Because I wasn't able to find it in the gmac driver. > + reg = <0x0 0xff4e0000 0x0 0x10000>; > + rockchip,grf = <&grf>; > + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "macirq"; > + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, > + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, > + <&cru SCLK_MAC>, <&cru ACLK_MAC>, > + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; > + clock-names = "stmmaceth", "mac_clk_rx", > + "mac_clk_tx", "clk_mac_ref", > + "clk_mac_refout", "aclk_mac", > + "pclk_mac", "clk_mac_speed"; > + phy-mode = "rmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; > + resets = <&cru SRST_MAC_A>; > + reset-names = "stmmaceth"; > + status = "disabled"; > + }; Heiko ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC @ 2019-10-17 23:30 ` Heiko Stuebner 0 siblings, 0 replies; 16+ messages in thread From: Heiko Stuebner @ 2019-10-17 23:30 UTC (permalink / raw) To: Andy Yan Cc: kever.yang, linux-rockchip, linux-kernel, linux-arm-kernel, robh+dt, devicetree Hi Andy, Am Donnerstag, 17. Oktober 2019, 05:04:49 CEST schrieb Andy Yan: > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; Please also provide a ATF implementation for the rk3308 :-) [Not a requirement for getting this merged, but it would be really cool to have sources for the full stack] > + > + ramoops_mem: ramoops_mem { > + reg = <0x0 0x110000 0x0 0xf0000>; > + reg-names = "ramoops_mem"; > + }; > + > + ramoops: ramoops { > + compatible = "ramoops"; > + record-size = <0x0 0x30000>; > + console-size = <0x0 0xc0000>; > + ftrace-size = <0x0 0x00000>; > + pmsg-size = <0x0 0x00000>; > + memory-region = <&ramoops_mem>; > + }; I think ramoops are more a per-board thing, like for the evb. As they'll require cooperation with bootloaders to not mangle that memory area. For this please also coordinate with Kever because I somehow remember we have u-boot sometimes at 0x100000. > + grf: grf@ff000000 { > + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; Please add a patch adding the rockchip,rk3308-grf compatible to Documentation/devicetree/bindings/soc/rockchip/grf.txt > + reg = <0x0 0xff000000 0x0 0x10000>; > + > + reboot-mode { > + compatible = "syscon-reboot-mode"; > + offset = <0x500>; > + mode-bootloader = <BOOT_BL_DOWNLOAD>; > + mode-loader = <BOOT_BL_DOWNLOAD>; > + mode-normal = <BOOT_NORMAL>; > + mode-recovery = <BOOT_RECOVERY>; > + mode-fastboot = <BOOT_FASTBOOT>; > + }; > + }; > + > + detect_grf: syscon@ff00b000 { > + compatible = "syscon", "simple-mfd"; compatible = "rockchip,rk3308-detect-grf", "syscon" + add the rk3308-detect-grf to the binding > + reg = <0x0 0xff00b000 0x0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + }; > + > + core_grf: syscon@ff00c000 { > + compatible = "syscon", "simple-mfd"; same as detect_grf > + reg = <0x0 0xff00c000 0x0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + }; > + > + i2c0: i2c@ff040000 { > + compatible = "rockchip,rk3399-i2c"; compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; Same for all i2c controllers. > + reg = <0x0 0xff040000 0x0 0x1000>; > + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; > + clock-names = "i2c", "pclk"; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_xfer>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + spi0: spi@ff120000 { > + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; > + reg = <0x0 0xff120000 0x0 0x1000>; > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; > + clock-names = "spiclk", "apb_pclk"; > + dmas = <&dmac0 0>, <&dmac0 1>; > + dma-names = "tx", "rx"; > + pinctrl-names = "default", "high_speed"; there is no high_speed pinctrl defined for the Rockchip spi driver in mainline, so this part should go away in a first step. Same for the other spi controllers. > + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; > + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; > + status = "disabled"; > + }; > + rktimer: rktimer@ff1a0000 { > + compatible = "rockchip,rk3288-timer"; compatible = "rockchip,rk3308-timer", "rockchip,rk3288-timer"; > + reg = <0x0 0xff1a0000 0x0 0x20>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; > + clock-names = "pclk", "timer"; > + }; > + amba { > + compatible = "arm,amba-bus"; compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + dmac0: dma-controller@ff2c0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0xff2c0000 0x0 0x4000>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + clocks = <&cru ACLK_DMAC0>; > + clock-names = "apb_pclk"; > + peripherals-req-type-burst; peripherals-req-type-burst is undocumented so likely some change to the dma driver not yet upstream? > + }; > + > + dmac1: dma-controller@ff2d0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0xff2d0000 0x0 0x4000>; > + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + clocks = <&cru ACLK_DMAC1>; > + clock-names = "apb_pclk"; > + peripherals-req-type-burst; > + }; > + }; > + > + i2s_2ch_0: i2s@ff350000 { > + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; > + reg = <0x0 0xff350000 0x0 0x1000>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; > + clock-names = "i2s_clk", "i2s_hclk"; > + dmas = <&dmac1 8>, <&dmac1 9>; > + dma-names = "tx", "rx"; > + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; > + reset-names = "reset-m", "reset-h"; These resets don't seem to be defined in driver or binding? Same for other i2s > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s_2ch_0_sclk > + &i2s_2ch_0_lrck > + &i2s_2ch_0_sdi > + &i2s_2ch_0_sdo>; > + status = "disabled"; > + }; > + > + mac: ethernet@ff4e0000 { > + compatible = "rockchip,rk3308-mac"; Was this support to the network driver already submitted? Because I wasn't able to find it in the gmac driver. > + reg = <0x0 0xff4e0000 0x0 0x10000>; > + rockchip,grf = <&grf>; > + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "macirq"; > + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, > + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, > + <&cru SCLK_MAC>, <&cru ACLK_MAC>, > + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; > + clock-names = "stmmaceth", "mac_clk_rx", > + "mac_clk_tx", "clk_mac_ref", > + "clk_mac_refout", "aclk_mac", > + "pclk_mac", "clk_mac_speed"; > + phy-mode = "rmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; > + resets = <&cru SRST_MAC_A>; > + reset-names = "stmmaceth"; > + status = "disabled"; > + }; Heiko ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC @ 2019-10-17 23:30 ` Heiko Stuebner 0 siblings, 0 replies; 16+ messages in thread From: Heiko Stuebner @ 2019-10-17 23:30 UTC (permalink / raw) To: Andy Yan Cc: devicetree, kever.yang, linux-kernel, linux-rockchip, robh+dt, linux-arm-kernel Hi Andy, Am Donnerstag, 17. Oktober 2019, 05:04:49 CEST schrieb Andy Yan: > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; Please also provide a ATF implementation for the rk3308 :-) [Not a requirement for getting this merged, but it would be really cool to have sources for the full stack] > + > + ramoops_mem: ramoops_mem { > + reg = <0x0 0x110000 0x0 0xf0000>; > + reg-names = "ramoops_mem"; > + }; > + > + ramoops: ramoops { > + compatible = "ramoops"; > + record-size = <0x0 0x30000>; > + console-size = <0x0 0xc0000>; > + ftrace-size = <0x0 0x00000>; > + pmsg-size = <0x0 0x00000>; > + memory-region = <&ramoops_mem>; > + }; I think ramoops are more a per-board thing, like for the evb. As they'll require cooperation with bootloaders to not mangle that memory area. For this please also coordinate with Kever because I somehow remember we have u-boot sometimes at 0x100000. > + grf: grf@ff000000 { > + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; Please add a patch adding the rockchip,rk3308-grf compatible to Documentation/devicetree/bindings/soc/rockchip/grf.txt > + reg = <0x0 0xff000000 0x0 0x10000>; > + > + reboot-mode { > + compatible = "syscon-reboot-mode"; > + offset = <0x500>; > + mode-bootloader = <BOOT_BL_DOWNLOAD>; > + mode-loader = <BOOT_BL_DOWNLOAD>; > + mode-normal = <BOOT_NORMAL>; > + mode-recovery = <BOOT_RECOVERY>; > + mode-fastboot = <BOOT_FASTBOOT>; > + }; > + }; > + > + detect_grf: syscon@ff00b000 { > + compatible = "syscon", "simple-mfd"; compatible = "rockchip,rk3308-detect-grf", "syscon" + add the rk3308-detect-grf to the binding > + reg = <0x0 0xff00b000 0x0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + }; > + > + core_grf: syscon@ff00c000 { > + compatible = "syscon", "simple-mfd"; same as detect_grf > + reg = <0x0 0xff00c000 0x0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + }; > + > + i2c0: i2c@ff040000 { > + compatible = "rockchip,rk3399-i2c"; compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; Same for all i2c controllers. > + reg = <0x0 0xff040000 0x0 0x1000>; > + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; > + clock-names = "i2c", "pclk"; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_xfer>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + spi0: spi@ff120000 { > + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; > + reg = <0x0 0xff120000 0x0 0x1000>; > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; > + clock-names = "spiclk", "apb_pclk"; > + dmas = <&dmac0 0>, <&dmac0 1>; > + dma-names = "tx", "rx"; > + pinctrl-names = "default", "high_speed"; there is no high_speed pinctrl defined for the Rockchip spi driver in mainline, so this part should go away in a first step. Same for the other spi controllers. > + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; > + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; > + status = "disabled"; > + }; > + rktimer: rktimer@ff1a0000 { > + compatible = "rockchip,rk3288-timer"; compatible = "rockchip,rk3308-timer", "rockchip,rk3288-timer"; > + reg = <0x0 0xff1a0000 0x0 0x20>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; > + clock-names = "pclk", "timer"; > + }; > + amba { > + compatible = "arm,amba-bus"; compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + dmac0: dma-controller@ff2c0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0xff2c0000 0x0 0x4000>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + clocks = <&cru ACLK_DMAC0>; > + clock-names = "apb_pclk"; > + peripherals-req-type-burst; peripherals-req-type-burst is undocumented so likely some change to the dma driver not yet upstream? > + }; > + > + dmac1: dma-controller@ff2d0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0xff2d0000 0x0 0x4000>; > + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + clocks = <&cru ACLK_DMAC1>; > + clock-names = "apb_pclk"; > + peripherals-req-type-burst; > + }; > + }; > + > + i2s_2ch_0: i2s@ff350000 { > + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; > + reg = <0x0 0xff350000 0x0 0x1000>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; > + clock-names = "i2s_clk", "i2s_hclk"; > + dmas = <&dmac1 8>, <&dmac1 9>; > + dma-names = "tx", "rx"; > + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; > + reset-names = "reset-m", "reset-h"; These resets don't seem to be defined in driver or binding? Same for other i2s > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s_2ch_0_sclk > + &i2s_2ch_0_lrck > + &i2s_2ch_0_sdi > + &i2s_2ch_0_sdo>; > + status = "disabled"; > + }; > + > + mac: ethernet@ff4e0000 { > + compatible = "rockchip,rk3308-mac"; Was this support to the network driver already submitted? Because I wasn't able to find it in the gmac driver. > + reg = <0x0 0xff4e0000 0x0 0x10000>; > + rockchip,grf = <&grf>; > + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "macirq"; > + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, > + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, > + <&cru SCLK_MAC>, <&cru ACLK_MAC>, > + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; > + clock-names = "stmmaceth", "mac_clk_rx", > + "mac_clk_tx", "clk_mac_ref", > + "clk_mac_refout", "aclk_mac", > + "pclk_mac", "clk_mac_speed"; > + phy-mode = "rmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; > + resets = <&cru SRST_MAC_A>; > + reset-names = "stmmaceth"; > + status = "disabled"; > + }; Heiko _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC 2019-10-17 23:30 ` Heiko Stuebner @ 2019-10-21 9:09 ` Andy Yan -1 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-21 9:09 UTC (permalink / raw) To: Heiko Stuebner Cc: kever.yang, linux-rockchip, linux-kernel, linux-arm-kernel, robh+dt, devicetree, tony.xie, huangtao Hi Heiko: Thanks for your kindly review. On 10/18/19 7:30 AM, Heiko Stuebner wrote: > Hi Andy, > > Am Donnerstag, 17. Oktober 2019, 05:04:49 CEST schrieb Andy Yan: > >> + psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; > Please also provide a ATF implementation for the rk3308 :-) > [Not a requirement for getting this merged, but it would be > really cool to have sources for the full stack] Tony's team has the plan to do it. >> + >> + ramoops_mem: ramoops_mem { >> + reg = <0x0 0x110000 0x0 0xf0000>; >> + reg-names = "ramoops_mem"; >> + }; >> + >> + ramoops: ramoops { >> + compatible = "ramoops"; >> + record-size = <0x0 0x30000>; >> + console-size = <0x0 0xc0000>; >> + ftrace-size = <0x0 0x00000>; >> + pmsg-size = <0x0 0x00000>; >> + memory-region = <&ramoops_mem>; >> + }; > I think ramoops are more a per-board thing, like for the evb. > As they'll require cooperation with bootloaders to not mangle that > memory area. For this please also coordinate with Kever because > I somehow remember we have u-boot sometimes at 0x100000. > I removed it in V2. >> + grf: grf@ff000000 { >> + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; > Please add a patch adding the rockchip,rk3308-grf compatible to > Documentation/devicetree/bindings/soc/rockchip/grf.txt Done > >> + reg = <0x0 0xff000000 0x0 0x10000>; >> + >> + reboot-mode { >> + compatible = "syscon-reboot-mode"; >> + offset = <0x500>; >> + mode-bootloader = <BOOT_BL_DOWNLOAD>; >> + mode-loader = <BOOT_BL_DOWNLOAD>; >> + mode-normal = <BOOT_NORMAL>; >> + mode-recovery = <BOOT_RECOVERY>; >> + mode-fastboot = <BOOT_FASTBOOT>; >> + }; >> + }; >> + >> + detect_grf: syscon@ff00b000 { >> + compatible = "syscon", "simple-mfd"; > compatible = "rockchip,rk3308-detect-grf", "syscon" > + add the rk3308-detect-grf to the binding Done >> + reg = <0x0 0xff00b000 0x0 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + }; >> + >> + core_grf: syscon@ff00c000 { >> + compatible = "syscon", "simple-mfd"; > same as detect_grf Done > >> + reg = <0x0 0xff00c000 0x0 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + }; >> + >> + i2c0: i2c@ff040000 { >> + compatible = "rockchip,rk3399-i2c"; > compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; > Same for all i2c controllers. Done > >> + reg = <0x0 0xff040000 0x0 0x1000>; >> + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; >> + clock-names = "i2c", "pclk"; >> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2c0_xfer>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; > >> + spi0: spi@ff120000 { >> + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; >> + reg = <0x0 0xff120000 0x0 0x1000>; >> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; >> + clock-names = "spiclk", "apb_pclk"; >> + dmas = <&dmac0 0>, <&dmac0 1>; >> + dma-names = "tx", "rx"; >> + pinctrl-names = "default", "high_speed"; > there is no high_speed pinctrl defined for the Rockchip spi driver > in mainline, so this part should go away in a first step. > Same for the other spi controllers. > Removed >> + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; >> + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; >> + status = "disabled"; >> + }; > >> + rktimer: rktimer@ff1a0000 { >> + compatible = "rockchip,rk3288-timer"; > compatible = "rockchip,rk3308-timer", "rockchip,rk3288-timer"; Done > >> + reg = <0x0 0xff1a0000 0x0 0x20>; >> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; >> + clock-names = "pclk", "timer"; >> + }; > > >> + amba { >> + compatible = "arm,amba-bus"; > compatible = "simple-bus"; Done >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + dmac0: dma-controller@ff2c0000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x0 0xff2c0000 0x0 0x4000>; >> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; >> + #dma-cells = <1>; >> + clocks = <&cru ACLK_DMAC0>; >> + clock-names = "apb_pclk"; >> + peripherals-req-type-burst; > peripherals-req-type-burst is undocumented so likely some change to the > dma driver not yet upstream? not upstream， so i remove it. >> + }; >> + >> + dmac1: dma-controller@ff2d0000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x0 0xff2d0000 0x0 0x4000>; >> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; >> + #dma-cells = <1>; >> + clocks = <&cru ACLK_DMAC1>; >> + clock-names = "apb_pclk"; >> + peripherals-req-type-burst; >> + }; >> + }; >> + >> + i2s_2ch_0: i2s@ff350000 { >> + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; >> + reg = <0x0 0xff350000 0x0 0x1000>; >> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; >> + clock-names = "i2s_clk", "i2s_hclk"; >> + dmas = <&dmac1 8>, <&dmac1 9>; >> + dma-names = "tx", "rx"; >> + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; >> + reset-names = "reset-m", "reset-h"; > These resets don't seem to be defined in driver or binding? > Same for other i2s Remove in v2 > >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2s_2ch_0_sclk >> + &i2s_2ch_0_lrck >> + &i2s_2ch_0_sdi >> + &i2s_2ch_0_sdo>; >> + status = "disabled"; >> + }; > >> + >> + mac: ethernet@ff4e0000 { >> + compatible = "rockchip,rk3308-mac"; > Was this support to the network driver already submitted? > Because I wasn't able to find it in the gmac driver. I remove mac in v2. > >> + reg = <0x0 0xff4e0000 0x0 0x10000>; >> + rockchip,grf = <&grf>; >> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "macirq"; >> + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, >> + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, >> + <&cru SCLK_MAC>, <&cru ACLK_MAC>, >> + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; >> + clock-names = "stmmaceth", "mac_clk_rx", >> + "mac_clk_tx", "clk_mac_ref", >> + "clk_mac_refout", "aclk_mac", >> + "pclk_mac", "clk_mac_speed"; >> + phy-mode = "rmii"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; >> + resets = <&cru SRST_MAC_A>; >> + reset-names = "stmmaceth"; >> + status = "disabled"; >> + }; > > Heiko > > > > ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC @ 2019-10-21 9:09 ` Andy Yan 0 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-21 9:09 UTC (permalink / raw) To: Heiko Stuebner Cc: huangtao, devicetree, tony.xie, kever.yang, linux-kernel, linux-rockchip, robh+dt, linux-arm-kernel Hi Heiko: Thanks for your kindly review. On 10/18/19 7:30 AM, Heiko Stuebner wrote: > Hi Andy, > > Am Donnerstag, 17. Oktober 2019, 05:04:49 CEST schrieb Andy Yan: > >> + psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; > Please also provide a ATF implementation for the rk3308 :-) > [Not a requirement for getting this merged, but it would be > really cool to have sources for the full stack] Tony's team has the plan to do it. >> + >> + ramoops_mem: ramoops_mem { >> + reg = <0x0 0x110000 0x0 0xf0000>; >> + reg-names = "ramoops_mem"; >> + }; >> + >> + ramoops: ramoops { >> + compatible = "ramoops"; >> + record-size = <0x0 0x30000>; >> + console-size = <0x0 0xc0000>; >> + ftrace-size = <0x0 0x00000>; >> + pmsg-size = <0x0 0x00000>; >> + memory-region = <&ramoops_mem>; >> + }; > I think ramoops are more a per-board thing, like for the evb. > As they'll require cooperation with bootloaders to not mangle that > memory area. For this please also coordinate with Kever because > I somehow remember we have u-boot sometimes at 0x100000. > I removed it in V2. >> + grf: grf@ff000000 { >> + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; > Please add a patch adding the rockchip,rk3308-grf compatible to > Documentation/devicetree/bindings/soc/rockchip/grf.txt Done > >> + reg = <0x0 0xff000000 0x0 0x10000>; >> + >> + reboot-mode { >> + compatible = "syscon-reboot-mode"; >> + offset = <0x500>; >> + mode-bootloader = <BOOT_BL_DOWNLOAD>; >> + mode-loader = <BOOT_BL_DOWNLOAD>; >> + mode-normal = <BOOT_NORMAL>; >> + mode-recovery = <BOOT_RECOVERY>; >> + mode-fastboot = <BOOT_FASTBOOT>; >> + }; >> + }; >> + >> + detect_grf: syscon@ff00b000 { >> + compatible = "syscon", "simple-mfd"; > compatible = "rockchip,rk3308-detect-grf", "syscon" > + add the rk3308-detect-grf to the binding Done >> + reg = <0x0 0xff00b000 0x0 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + }; >> + >> + core_grf: syscon@ff00c000 { >> + compatible = "syscon", "simple-mfd"; > same as detect_grf Done > >> + reg = <0x0 0xff00c000 0x0 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + }; >> + >> + i2c0: i2c@ff040000 { >> + compatible = "rockchip,rk3399-i2c"; > compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; > Same for all i2c controllers. Done > >> + reg = <0x0 0xff040000 0x0 0x1000>; >> + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; >> + clock-names = "i2c", "pclk"; >> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2c0_xfer>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; > >> + spi0: spi@ff120000 { >> + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; >> + reg = <0x0 0xff120000 0x0 0x1000>; >> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; >> + clock-names = "spiclk", "apb_pclk"; >> + dmas = <&dmac0 0>, <&dmac0 1>; >> + dma-names = "tx", "rx"; >> + pinctrl-names = "default", "high_speed"; > there is no high_speed pinctrl defined for the Rockchip spi driver > in mainline, so this part should go away in a first step. > Same for the other spi controllers. > Removed >> + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; >> + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; >> + status = "disabled"; >> + }; > >> + rktimer: rktimer@ff1a0000 { >> + compatible = "rockchip,rk3288-timer"; > compatible = "rockchip,rk3308-timer", "rockchip,rk3288-timer"; Done > >> + reg = <0x0 0xff1a0000 0x0 0x20>; >> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; >> + clock-names = "pclk", "timer"; >> + }; > > >> + amba { >> + compatible = "arm,amba-bus"; > compatible = "simple-bus"; Done >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + dmac0: dma-controller@ff2c0000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x0 0xff2c0000 0x0 0x4000>; >> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; >> + #dma-cells = <1>; >> + clocks = <&cru ACLK_DMAC0>; >> + clock-names = "apb_pclk"; >> + peripherals-req-type-burst; > peripherals-req-type-burst is undocumented so likely some change to the > dma driver not yet upstream? not upstream， so i remove it. >> + }; >> + >> + dmac1: dma-controller@ff2d0000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x0 0xff2d0000 0x0 0x4000>; >> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; >> + #dma-cells = <1>; >> + clocks = <&cru ACLK_DMAC1>; >> + clock-names = "apb_pclk"; >> + peripherals-req-type-burst; >> + }; >> + }; >> + >> + i2s_2ch_0: i2s@ff350000 { >> + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; >> + reg = <0x0 0xff350000 0x0 0x1000>; >> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; >> + clock-names = "i2s_clk", "i2s_hclk"; >> + dmas = <&dmac1 8>, <&dmac1 9>; >> + dma-names = "tx", "rx"; >> + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; >> + reset-names = "reset-m", "reset-h"; > These resets don't seem to be defined in driver or binding? > Same for other i2s Remove in v2 > >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2s_2ch_0_sclk >> + &i2s_2ch_0_lrck >> + &i2s_2ch_0_sdi >> + &i2s_2ch_0_sdo>; >> + status = "disabled"; >> + }; > >> + >> + mac: ethernet@ff4e0000 { >> + compatible = "rockchip,rk3308-mac"; > Was this support to the network driver already submitted? > Because I wasn't able to find it in the gmac driver. I remove mac in v2. > >> + reg = <0x0 0xff4e0000 0x0 0x10000>; >> + rockchip,grf = <&grf>; >> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "macirq"; >> + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, >> + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, >> + <&cru SCLK_MAC>, <&cru ACLK_MAC>, >> + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; >> + clock-names = "stmmaceth", "mac_clk_rx", >> + "mac_clk_tx", "clk_mac_ref", >> + "clk_mac_refout", "aclk_mac", >> + "pclk_mac", "clk_mac_speed"; >> + phy-mode = "rmii"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; >> + resets = <&cru SRST_MAC_A>; >> + reset-names = "stmmaceth"; >> + status = "disabled"; >> + }; > > Heiko > > > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 2/2] arm64: dts: rockchip: Add basic dts for RK3308 EVB 2019-10-17 3:02 ` Andy Yan (?) @ 2019-10-17 3:05 ` Andy Yan -1 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:05 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: devicetree, obh+dt, linux-kernel, linux-arm-kernel, Andy Yan This board use uart4 as debug port and arm core voltage is modulated by pwm. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> --- .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 206 ++++++++++++++++++ 3 files changed, 212 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-evb.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c82c5e57d44c..b680c4b8b2c9 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -447,6 +447,11 @@ properties: - const: rockchip,r88 - const: rockchip,rk3368 + - description: Rockchip RK3308 Evaluation board + items: + - const: rockchip,rk3308-evb + - const: rockchip,rk3308 + - description: Rockchip RK3228 Evaluation board items: - const: rockchip,rk3228-evb diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1f18a9392d15..a959434ad46e 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts new file mode 100644 index 000000000000..16be04f38b30 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3308.dtsi" + +/ { + model = "Rockchip RK3308 EVB"; + compatible = "rockchip,rk3308-evb", "rockchip,rk3308"; + + chosen { + stdout-path = "serial4:1500000n8"; + }; + + adc-keys0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + func-key { + linux,code = <KEY_FN>; + label = "function"; + press-threshold-microvolt = <18000>; + }; + }; + + adc-keys1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + esc-key { + linux,code = <KEY_MICMUTE>; + label = "micmute"; + press-threshold-microvolt = <1130000>; + }; + + home-key { + linux,code = <KEY_MODE>; + label = "mode"; + press-threshold-microvolt = <901000>; + }; + + menu-key { + linux,code = <KEY_PLAY>; + label = "play"; + press-threshold-microvolt = <624000>; + }; + + vol-down-key { + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + press-threshold-microvolt = <300000>; + }; + + vol-up-key { + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + wakeup-source; + debounce-interval = <100>; + }; + }; + + vdd_log: vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-init-microvolt = <1015000>; + regulator-early-min-microvolt = <1015000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + status = "okay"; + }; + + vdd_1v0: vdd-1v0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vccio_sdio: vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_ddr: vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccio_flash: vccio-flash { + compatible = "regulator-fixed"; + regulator-name = "vccio_flash"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vbus_host: vbus-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_drv>; + regulator-name = "vbus_host"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>; + }; + }; + + usb { + usb_drv: usb-drv { + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; + + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts>; + status = "okay"; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/2] arm64: dts: rockchip: Add basic dts for RK3308 EVB @ 2019-10-17 3:05 ` Andy Yan 0 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:05 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: linux-kernel, linux-arm-kernel, obh+dt, devicetree, Andy Yan This board use uart4 as debug port and arm core voltage is modulated by pwm. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> --- .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 206 ++++++++++++++++++ 3 files changed, 212 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-evb.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c82c5e57d44c..b680c4b8b2c9 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -447,6 +447,11 @@ properties: - const: rockchip,r88 - const: rockchip,rk3368 + - description: Rockchip RK3308 Evaluation board + items: + - const: rockchip,rk3308-evb + - const: rockchip,rk3308 + - description: Rockchip RK3228 Evaluation board items: - const: rockchip,rk3228-evb diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1f18a9392d15..a959434ad46e 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts new file mode 100644 index 000000000000..16be04f38b30 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3308.dtsi" + +/ { + model = "Rockchip RK3308 EVB"; + compatible = "rockchip,rk3308-evb", "rockchip,rk3308"; + + chosen { + stdout-path = "serial4:1500000n8"; + }; + + adc-keys0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + func-key { + linux,code = <KEY_FN>; + label = "function"; + press-threshold-microvolt = <18000>; + }; + }; + + adc-keys1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + esc-key { + linux,code = <KEY_MICMUTE>; + label = "micmute"; + press-threshold-microvolt = <1130000>; + }; + + home-key { + linux,code = <KEY_MODE>; + label = "mode"; + press-threshold-microvolt = <901000>; + }; + + menu-key { + linux,code = <KEY_PLAY>; + label = "play"; + press-threshold-microvolt = <624000>; + }; + + vol-down-key { + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + press-threshold-microvolt = <300000>; + }; + + vol-up-key { + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + wakeup-source; + debounce-interval = <100>; + }; + }; + + vdd_log: vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-init-microvolt = <1015000>; + regulator-early-min-microvolt = <1015000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + status = "okay"; + }; + + vdd_1v0: vdd-1v0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vccio_sdio: vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_ddr: vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccio_flash: vccio-flash { + compatible = "regulator-fixed"; + regulator-name = "vccio_flash"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vbus_host: vbus-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_drv>; + regulator-name = "vbus_host"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>; + }; + }; + + usb { + usb_drv: usb-drv { + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; + + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts>; + status = "okay"; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/2] arm64: dts: rockchip: Add basic dts for RK3308 EVB @ 2019-10-17 3:05 ` Andy Yan 0 siblings, 0 replies; 16+ messages in thread From: Andy Yan @ 2019-10-17 3:05 UTC (permalink / raw) To: heiko, kever.yang, linux-rockchip Cc: devicetree, obh+dt, linux-kernel, linux-arm-kernel, Andy Yan This board use uart4 as debug port and arm core voltage is modulated by pwm. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> --- .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 206 ++++++++++++++++++ 3 files changed, 212 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-evb.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c82c5e57d44c..b680c4b8b2c9 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -447,6 +447,11 @@ properties: - const: rockchip,r88 - const: rockchip,rk3368 + - description: Rockchip RK3308 Evaluation board + items: + - const: rockchip,rk3308-evb + - const: rockchip,rk3308 + - description: Rockchip RK3228 Evaluation board items: - const: rockchip,rk3228-evb diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1f18a9392d15..a959434ad46e 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts new file mode 100644 index 000000000000..16be04f38b30 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3308.dtsi" + +/ { + model = "Rockchip RK3308 EVB"; + compatible = "rockchip,rk3308-evb", "rockchip,rk3308"; + + chosen { + stdout-path = "serial4:1500000n8"; + }; + + adc-keys0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + func-key { + linux,code = <KEY_FN>; + label = "function"; + press-threshold-microvolt = <18000>; + }; + }; + + adc-keys1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + esc-key { + linux,code = <KEY_MICMUTE>; + label = "micmute"; + press-threshold-microvolt = <1130000>; + }; + + home-key { + linux,code = <KEY_MODE>; + label = "mode"; + press-threshold-microvolt = <901000>; + }; + + menu-key { + linux,code = <KEY_PLAY>; + label = "play"; + press-threshold-microvolt = <624000>; + }; + + vol-down-key { + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + press-threshold-microvolt = <300000>; + }; + + vol-up-key { + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + wakeup-source; + debounce-interval = <100>; + }; + }; + + vdd_log: vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-init-microvolt = <1015000>; + regulator-early-min-microvolt = <1015000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + status = "okay"; + }; + + vdd_1v0: vdd-1v0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vccio_sdio: vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_ddr: vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccio_flash: vccio-flash { + compatible = "regulator-fixed"; + regulator-name = "vccio_flash"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vbus_host: vbus-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_drv>; + regulator-name = "vbus_host"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>; + }; + }; + + usb { + usb_drv: usb-drv { + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; + + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts>; + status = "okay"; +}; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 2/2] arm64: dts: rockchip: Add basic dts for RK3308 EVB 2019-10-17 3:05 ` Andy Yan @ 2019-10-17 23:39 ` Heiko Stuebner -1 siblings, 0 replies; 16+ messages in thread From: Heiko Stuebner @ 2019-10-17 23:39 UTC (permalink / raw) To: Andy Yan Cc: kever.yang, linux-rockchip, linux-kernel, linux-arm-kernel, robh+dt, devicetree Hi Andy, Am Donnerstag, 17. Oktober 2019, 05:05:20 CEST schrieb Andy Yan: > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > index c82c5e57d44c..b680c4b8b2c9 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > @@ -447,6 +447,11 @@ properties: > - const: rockchip,r88 > - const: rockchip,rk3368 > > + - description: Rockchip RK3308 Evaluation board > + items: > + - const: rockchip,rk3308-evb > + - const: rockchip,rk3308 > + > - description: Rockchip RK3228 Evaluation board > items: > - const: rockchip,rk3228-evb Rob likes the binding addition to be a separate patch. > + vdd_log: vdd_core: vdd-core { > + compatible = "pwm-regulator"; > + pwms = <&pwm0 0 5000 1>; > + regulator-name = "vdd_core"; > + regulator-min-microvolt = <827000>; > + regulator-max-microvolt = <1340000>; > + regulator-init-microvolt = <1015000>; > + regulator-early-min-microvolt = <1015000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-settling-time-up-us = <250>; > + status = "okay"; It's a board-regulator, so always "okay", no need for a status. In general for regulators, please create an actual regulator tree, with correctly modelled supply-chains following the naming according to the board schematics. See for example rk3399-gru for a nice example. > + }; > + > + vdd_1v0: vdd-1v0 { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_1v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; As noted above, missing vin-supply > + }; > + > + vccio_flash: vccio-flash { > + compatible = "regulator-fixed"; > + regulator-name = "vccio_flash"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vcc_phy: vcc-phy-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_phy"; > + regulator-always-on; > + regulator-boot-on; This is the classic example of not following the schematics. I.e. no Rockchip board I know has a regulator named "vcc_phy" that is completely unconnected, yet all boards in the vendor tree have this regulator ;-) ... so as I said, please follow the schematics. > + }; > + > + vbus_host: vbus-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_drv>; > + regulator-name = "vbus_host"; > + }; > +}; > + Thanks Heiko ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 2/2] arm64: dts: rockchip: Add basic dts for RK3308 EVB @ 2019-10-17 23:39 ` Heiko Stuebner 0 siblings, 0 replies; 16+ messages in thread From: Heiko Stuebner @ 2019-10-17 23:39 UTC (permalink / raw) To: Andy Yan Cc: devicetree, kever.yang, linux-kernel, linux-rockchip, robh+dt, linux-arm-kernel Hi Andy, Am Donnerstag, 17. Oktober 2019, 05:05:20 CEST schrieb Andy Yan: > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > index c82c5e57d44c..b680c4b8b2c9 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > @@ -447,6 +447,11 @@ properties: > - const: rockchip,r88 > - const: rockchip,rk3368 > > + - description: Rockchip RK3308 Evaluation board > + items: > + - const: rockchip,rk3308-evb > + - const: rockchip,rk3308 > + > - description: Rockchip RK3228 Evaluation board > items: > - const: rockchip,rk3228-evb Rob likes the binding addition to be a separate patch. > + vdd_log: vdd_core: vdd-core { > + compatible = "pwm-regulator"; > + pwms = <&pwm0 0 5000 1>; > + regulator-name = "vdd_core"; > + regulator-min-microvolt = <827000>; > + regulator-max-microvolt = <1340000>; > + regulator-init-microvolt = <1015000>; > + regulator-early-min-microvolt = <1015000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-settling-time-up-us = <250>; > + status = "okay"; It's a board-regulator, so always "okay", no need for a status. In general for regulators, please create an actual regulator tree, with correctly modelled supply-chains following the naming according to the board schematics. See for example rk3399-gru for a nice example. > + }; > + > + vdd_1v0: vdd-1v0 { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_1v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; As noted above, missing vin-supply > + }; > + > + vccio_flash: vccio-flash { > + compatible = "regulator-fixed"; > + regulator-name = "vccio_flash"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vcc_phy: vcc-phy-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_phy"; > + regulator-always-on; > + regulator-boot-on; This is the classic example of not following the schematics. I.e. no Rockchip board I know has a regulator named "vcc_phy" that is completely unconnected, yet all boards in the vendor tree have this regulator ;-) ... so as I said, please follow the schematics. > + }; > + > + vbus_host: vbus-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_drv>; > + regulator-name = "vbus_host"; > + }; > +}; > + Thanks Heiko _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2019-10-21 9:12 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-17 3:02 [PATCH 0/2] Add basic dts support for RK3308 Andy Yan
2019-10-17 3:02 ` Andy Yan
2019-10-17 3:02 ` Andy Yan
2019-10-17 3:04 ` [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC Andy Yan
2019-10-17 3:04 ` Andy Yan
2019-10-17 3:04 ` Andy Yan
[not found] ` <20191017030449.32289-1-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2019-10-17 23:30 ` Heiko Stuebner
2019-10-17 23:30 ` Heiko Stuebner
2019-10-17 23:30 ` Heiko Stuebner
2019-10-21 9:09 ` Andy Yan
2019-10-21 9:09 ` Andy Yan
2019-10-17 3:05 ` [PATCH 2/2] arm64: dts: rockchip: Add basic dts for RK3308 EVB Andy Yan
2019-10-17 3:05 ` Andy Yan
2019-10-17 3:05 ` Andy Yan
2019-10-17 23:39 ` Heiko Stuebner
2019-10-17 23:39 ` Heiko Stuebner
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.