* rdac and aac
@ 2008-07-16 17:51 Yinghai Lu
2008-07-16 18:17 ` James Bottomley
2008-07-16 18:46 ` Chandra Seetharaman
0 siblings, 2 replies; 4+ messages in thread
From: Yinghai Lu @ 2008-07-16 17:51 UTC (permalink / raw)
To: Ingo Molnar, James Bottomley, Mark Salyzyn
Cc: Linux Kernel Mailing List, Linux-Scsi
calling aac_init+0x0/0x9a
Adaptec aacraid driver 1.1-5[2456]-ms
vendor=10de device=005d
ACPI: PCI Interrupt 0000:86:00.0[A] -> Link [LN2C] -> GSI 42 (level,
low) -> IRQ 42
PCI: Setting latency timer of device 0000:86:00.0 to 64
AAC0: kernel 5.2-0[15535] Oct 11 2007
AAC0: monitor 5.2-0[15535]
AAC0: bios 5.2-0[15535]
AAC0: serial 00721EC0115
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi0 : aacraid
BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
IP: [<ffffffff8051f024>] strncmp+0x1b/0x54
PGD 0
Oops: 0000 [1] SMP
CPU 28
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.26-tip-00047-g69a6a3e-dirty #394
RIP: 0010:[<ffffffff8051f024>] [<ffffffff8051f024>] strncmp+0x1b/0x54
RSP: 0018:ffff883824c579f0 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffffffff80ad2190 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff80cfe351 RDI: 0000000000000003
RBP: ffff883824c57a00 R08: 0000000000000000 R09: ffffe200e0774440
R10: 00000000f6f3ecb9 R11: 00000000f6f3ecb9 R12: ffff88402206c050
R13: ffff88402206c170 R14: 0000000000000000 R15: ffffffffffffffff
FS: 0000000000000000(0000) GS:ffff884024c3b600(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000003 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff883824c56000, task ffff883024c58000)
Stack: ffffffff80e705d0 00000000f6f3ecb9 ffff883824c57a50 ffffffff806ab127
ffffe200e0774440 00000000f6f3ecb9 00000000f6f3ecb9 0000000000000000
00000000ffffffff 0000000000000000 ffff88402206c170 0000000000000001
Call Trace:
[<ffffffff806ab127>] rdac_bus_notify+0x68/0x235
[<ffffffff80a4f7c6>] notifier_call_chain+0x45/0x84
[<ffffffff802835f1>] __blocking_notifier_call_chain+0x61/0x92
[<ffffffff80283649>] blocking_notifier_call_chain+0x27/0x3d
[<ffffffff805b5f36>] device_add+0xf5/0x4fd
[<ffffffff80682811>] ? scsi_setup_command_freelist+0x6c/0xc6
[<ffffffff80683477>] scsi_add_host+0xc5/0x20f
[<ffffffff80a28269>] aac_probe_one+0x3ef/0x4ba
[<ffffffff8053014e>] pci_device_probe+0xd5/0x142
[<ffffffff805b8a01>] driver_probe_device+0xd4/0x199
[<ffffffff802830da>] ? down+0x4b/0x68
[<ffffffff805b8b29>] __driver_attach+0x63/0xa4
[<ffffffff805b8ac6>] ? __driver_attach+0x0/0xa4
[<ffffffff805b8009>] bus_for_each_dev+0x63/0xb1
[<ffffffff805b87cb>] driver_attach+0x34/0x4a
[<ffffffff805b7779>] bus_add_driver+0xcb/0x22b
[<ffffffff8051ae5a>] ? kset_find_obj+0x4c/0x96
[<ffffffff805b8e4e>] driver_register+0xbc/0x153
[<ffffffff802313bd>] ? read_tsc+0x9/0x1c
[<ffffffff8053046f>] __pci_register_driver+0x67/0xb8
[<ffffffff80f71e34>] ? aac_init+0x0/0x9a
[<ffffffff80f71e7f>] aac_init+0x4b/0x9a
[<ffffffff80f409e4>] kernel_init+0x1de/0x346
[<ffffffff8022a4f4>] ? mcount_call+0x5/0x31
[<ffffffff80262df7>] ? finish_task_switch+0x14/0xe3
[<ffffffff8022b589>] child_rip+0xa/0x11
[<ffffffff80f40806>] ? kernel_init+0x0/0x346
[<ffffffff8022b57f>] ? child_rip+0x0/0x11
Code: 28 00 00 00 0f be c0 74 05 e8 0e 74 d4 ff c9 c3 55 31 c9 48 89
e5 48 83 ec 10 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 eb 19 <44>
8a 04 0f 44 88 c0 2a 04 0e 84 c0 75 12 48 ff c1 45 84 c0 74
RIP [<ffffffff8051f024>] strncmp+0x1b/0x54
RSP <ffff883824c579f0>
CR2: 0000000000000003
---[ end trace c89c20984b386ade ]---
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: rdac and aac
2008-07-16 17:51 rdac and aac Yinghai Lu
@ 2008-07-16 18:17 ` James Bottomley
2008-07-16 18:46 ` Chandra Seetharaman
1 sibling, 0 replies; 4+ messages in thread
From: James Bottomley @ 2008-07-16 18:17 UTC (permalink / raw)
To: Yinghai Lu
Cc: Ingo Molnar, Mark Salyzyn, Linux Kernel Mailing List, Linux-Scsi
On Wed, 2008-07-16 at 10:51 -0700, Yinghai Lu wrote:
> calling aac_init+0x0/0x9a
> Adaptec aacraid driver 1.1-5[2456]-ms
> vendor=10de device=005d
> ACPI: PCI Interrupt 0000:86:00.0[A] -> Link [LN2C] -> GSI 42 (level,
> low) -> IRQ 42
> PCI: Setting latency timer of device 0000:86:00.0 to 64
> AAC0: kernel 5.2-0[15535] Oct 11 2007
> AAC0: monitor 5.2-0[15535]
> AAC0: bios 5.2-0[15535]
> AAC0: serial 00721EC0115
> AAC0: Non-DASD support enabled.
> AAC0: 64bit support enabled.
> AAC0: 64 Bit DAC enabled
> scsi0 : aacraid
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
> IP: [<ffffffff8051f024>] strncmp+0x1b/0x54
> PGD 0
> Oops: 0000 [1] SMP
> CPU 28
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.26-tip-00047-g69a6a3e-dirty #394
> RIP: 0010:[<ffffffff8051f024>] [<ffffffff8051f024>] strncmp+0x1b/0x54
> RSP: 0018:ffff883824c579f0 EFLAGS: 00010206
> RAX: 0000000000000000 RBX: ffffffff80ad2190 RCX: 0000000000000000
> RDX: 0000000000000003 RSI: ffffffff80cfe351 RDI: 0000000000000003
> RBP: ffff883824c57a00 R08: 0000000000000000 R09: ffffe200e0774440
> R10: 00000000f6f3ecb9 R11: 00000000f6f3ecb9 R12: ffff88402206c050
> R13: ffff88402206c170 R14: 0000000000000000 R15: ffffffffffffffff
> FS: 0000000000000000(0000) GS:ffff884024c3b600(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000003 CR3: 0000000000201000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 1, threadinfo ffff883824c56000, task ffff883024c58000)
> Stack: ffffffff80e705d0 00000000f6f3ecb9 ffff883824c57a50 ffffffff806ab127
> ffffe200e0774440 00000000f6f3ecb9 00000000f6f3ecb9 0000000000000000
> 00000000ffffffff 0000000000000000 ffff88402206c170 0000000000000001
> Call Trace:
> [<ffffffff806ab127>] rdac_bus_notify+0x68/0x235
> [<ffffffff80a4f7c6>] notifier_call_chain+0x45/0x84
> [<ffffffff802835f1>] __blocking_notifier_call_chain+0x61/0x92
> [<ffffffff80283649>] blocking_notifier_call_chain+0x27/0x3d
> [<ffffffff805b5f36>] device_add+0xf5/0x4fd
> [<ffffffff80682811>] ? scsi_setup_command_freelist+0x6c/0xc6
> [<ffffffff80683477>] scsi_add_host+0xc5/0x20f
> [<ffffffff80a28269>] aac_probe_one+0x3ef/0x4ba
> [<ffffffff8053014e>] pci_device_probe+0xd5/0x142
> [<ffffffff805b8a01>] driver_probe_device+0xd4/0x199
> [<ffffffff802830da>] ? down+0x4b/0x68
> [<ffffffff805b8b29>] __driver_attach+0x63/0xa4
> [<ffffffff805b8ac6>] ? __driver_attach+0x0/0xa4
> [<ffffffff805b8009>] bus_for_each_dev+0x63/0xb1
> [<ffffffff805b87cb>] driver_attach+0x34/0x4a
> [<ffffffff805b7779>] bus_add_driver+0xcb/0x22b
> [<ffffffff8051ae5a>] ? kset_find_obj+0x4c/0x96
> [<ffffffff805b8e4e>] driver_register+0xbc/0x153
> [<ffffffff802313bd>] ? read_tsc+0x9/0x1c
> [<ffffffff8053046f>] __pci_register_driver+0x67/0xb8
> [<ffffffff80f71e34>] ? aac_init+0x0/0x9a
> [<ffffffff80f71e7f>] aac_init+0x4b/0x9a
> [<ffffffff80f409e4>] kernel_init+0x1de/0x346
> [<ffffffff8022a4f4>] ? mcount_call+0x5/0x31
> [<ffffffff80262df7>] ? finish_task_switch+0x14/0xe3
> [<ffffffff8022b589>] child_rip+0xa/0x11
> [<ffffffff80f40806>] ? kernel_init+0x0/0x346
> [<ffffffff8022b57f>] ? child_rip+0x0/0x11
Great ... I think this is another "we added targets to the scsi bus and
now it doesn't work" problem. To test the theory, does this fix the
problem?
James
---
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 6fff077..fdf34b0 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -608,12 +608,17 @@ static int rdac_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
struct scsi_dh_data *scsi_dh_data;
struct rdac_dh_data *h;
int i, found = 0;
unsigned long flags;
+ if (!scsi_is_sdev_device(dev))
+ return 0;
+
+ sdev = to_scsi_device(dev);
+
if (action == BUS_NOTIFY_ADD_DEVICE) {
for (i = 0; rdac_dev_list[i].vendor; i++) {
if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor,
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: rdac and aac
2008-07-16 17:51 rdac and aac Yinghai Lu
2008-07-16 18:17 ` James Bottomley
@ 2008-07-16 18:46 ` Chandra Seetharaman
2008-07-16 19:52 ` Yinghai Lu
1 sibling, 1 reply; 4+ messages in thread
From: Chandra Seetharaman @ 2008-07-16 18:46 UTC (permalink / raw)
To: Yinghai Lu
Cc: Ingo Molnar, James Bottomley, Mark Salyzyn,
Linux Kernel Mailing List, Linux-Scsi
Please test with the attached patch and see if it works.
regards,
chandra
---------------------
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
--
Index: linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_rdac.c
===================================================================
--- linux2.6.26-git3.orig/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -608,12 +608,17 @@ static int rdac_bus_notify(struct notifi
unsigned long action, void *data)
{
struct device *dev = data;
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
struct scsi_dh_data *scsi_dh_data;
struct rdac_dh_data *h;
int i, found = 0;
unsigned long flags;
+ if (!scsi_is_sdev_device(dev))
+ return 0;
+
+ sdev = to_scsi_device(dev);
+
if (action == BUS_NOTIFY_ADD_DEVICE) {
for (i = 0; rdac_dev_list[i].vendor; i++) {
if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor,
Index: linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_emc.c
===================================================================
--- linux2.6.26-git3.orig/drivers/scsi/device_handler/scsi_dh_emc.c
+++ linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -416,12 +416,17 @@ static int clariion_bus_notify(struct no
unsigned long action, void *data)
{
struct device *dev = data;
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
struct scsi_dh_data *scsi_dh_data;
struct clariion_dh_data *h;
int i, found = 0;
unsigned long flags;
+ if (!scsi_is_sdev_device(dev))
+ return 0;
+
+ sdev = to_scsi_device(dev);
+
if (action == BUS_NOTIFY_ADD_DEVICE) {
for (i = 0; clariion_dev_list[i].vendor; i++) {
if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor,
Index: linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_hp_sw.c
===================================================================
--- linux2.6.26-git3.orig/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -131,11 +131,16 @@ static int hp_sw_bus_notify(struct notif
unsigned long action, void *data)
{
struct device *dev = data;
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
struct scsi_dh_data *scsi_dh_data;
int i, found = 0;
unsigned long flags;
+ if (!scsi_is_sdev_device(dev))
+ return 0;
+
+ sdev = to_scsi_device(dev);
+
if (action == BUS_NOTIFY_ADD_DEVICE) {
for (i = 0; hp_sw_dh_data_list[i].vendor; i++) {
if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor,
---
On Wed, 2008-07-16 at 10:51 -0700, Yinghai Lu wrote:
> calling aac_init+0x0/0x9a
> Adaptec aacraid driver 1.1-5[2456]-ms
> vendor=10de device=005d
> ACPI: PCI Interrupt 0000:86:00.0[A] -> Link [LN2C] -> GSI 42 (level,
> low) -> IRQ 42
> PCI: Setting latency timer of device 0000:86:00.0 to 64
> AAC0: kernel 5.2-0[15535] Oct 11 2007
> AAC0: monitor 5.2-0[15535]
> AAC0: bios 5.2-0[15535]
> AAC0: serial 00721EC0115
> AAC0: Non-DASD support enabled.
> AAC0: 64bit support enabled.
> AAC0: 64 Bit DAC enabled
> scsi0 : aacraid
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
> IP: [<ffffffff8051f024>] strncmp+0x1b/0x54
> PGD 0
> Oops: 0000 [1] SMP
> CPU 28
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.26-tip-00047-g69a6a3e-dirty #394
> RIP: 0010:[<ffffffff8051f024>] [<ffffffff8051f024>] strncmp+0x1b/0x54
> RSP: 0018:ffff883824c579f0 EFLAGS: 00010206
> RAX: 0000000000000000 RBX: ffffffff80ad2190 RCX: 0000000000000000
> RDX: 0000000000000003 RSI: ffffffff80cfe351 RDI: 0000000000000003
> RBP: ffff883824c57a00 R08: 0000000000000000 R09: ffffe200e0774440
> R10: 00000000f6f3ecb9 R11: 00000000f6f3ecb9 R12: ffff88402206c050
> R13: ffff88402206c170 R14: 0000000000000000 R15: ffffffffffffffff
> FS: 0000000000000000(0000) GS:ffff884024c3b600(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000003 CR3: 0000000000201000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 1, threadinfo ffff883824c56000, task ffff883024c58000)
> Stack: ffffffff80e705d0 00000000f6f3ecb9 ffff883824c57a50 ffffffff806ab127
> ffffe200e0774440 00000000f6f3ecb9 00000000f6f3ecb9 0000000000000000
> 00000000ffffffff 0000000000000000 ffff88402206c170 0000000000000001
> Call Trace:
> [<ffffffff806ab127>] rdac_bus_notify+0x68/0x235
> [<ffffffff80a4f7c6>] notifier_call_chain+0x45/0x84
> [<ffffffff802835f1>] __blocking_notifier_call_chain+0x61/0x92
> [<ffffffff80283649>] blocking_notifier_call_chain+0x27/0x3d
> [<ffffffff805b5f36>] device_add+0xf5/0x4fd
> [<ffffffff80682811>] ? scsi_setup_command_freelist+0x6c/0xc6
> [<ffffffff80683477>] scsi_add_host+0xc5/0x20f
> [<ffffffff80a28269>] aac_probe_one+0x3ef/0x4ba
> [<ffffffff8053014e>] pci_device_probe+0xd5/0x142
> [<ffffffff805b8a01>] driver_probe_device+0xd4/0x199
> [<ffffffff802830da>] ? down+0x4b/0x68
> [<ffffffff805b8b29>] __driver_attach+0x63/0xa4
> [<ffffffff805b8ac6>] ? __driver_attach+0x0/0xa4
> [<ffffffff805b8009>] bus_for_each_dev+0x63/0xb1
> [<ffffffff805b87cb>] driver_attach+0x34/0x4a
> [<ffffffff805b7779>] bus_add_driver+0xcb/0x22b
> [<ffffffff8051ae5a>] ? kset_find_obj+0x4c/0x96
> [<ffffffff805b8e4e>] driver_register+0xbc/0x153
> [<ffffffff802313bd>] ? read_tsc+0x9/0x1c
> [<ffffffff8053046f>] __pci_register_driver+0x67/0xb8
> [<ffffffff80f71e34>] ? aac_init+0x0/0x9a
> [<ffffffff80f71e7f>] aac_init+0x4b/0x9a
> [<ffffffff80f409e4>] kernel_init+0x1de/0x346
> [<ffffffff8022a4f4>] ? mcount_call+0x5/0x31
> [<ffffffff80262df7>] ? finish_task_switch+0x14/0xe3
> [<ffffffff8022b589>] child_rip+0xa/0x11
> [<ffffffff80f40806>] ? kernel_init+0x0/0x346
> [<ffffffff8022b57f>] ? child_rip+0x0/0x11
>
>
> Code: 28 00 00 00 0f be c0 74 05 e8 0e 74 d4 ff c9 c3 55 31 c9 48 89
> e5 48 83 ec 10 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 eb 19 <44>
> 8a 04 0f 44 88 c0 2a 04 0e 84 c0 75 12 48 ff c1 45 84 c0 74
> RIP [<ffffffff8051f024>] strncmp+0x1b/0x54
> RSP <ffff883824c579f0>
> CR2: 0000000000000003
> ---[ end trace c89c20984b386ade ]---
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: rdac and aac
2008-07-16 18:46 ` Chandra Seetharaman
@ 2008-07-16 19:52 ` Yinghai Lu
0 siblings, 0 replies; 4+ messages in thread
From: Yinghai Lu @ 2008-07-16 19:52 UTC (permalink / raw)
To: sekharan
Cc: Ingo Molnar, James Bottomley, Mark Salyzyn,
Linux Kernel Mailing List, Linux-Scsi
On Wed, Jul 16, 2008 at 11:46 AM, Chandra Seetharaman
<sekharan@us.ibm.com> wrote:
> Please test with the attached patch and see if it works.
>
> regards,
>
> chandra
>
> ---------------------
>
> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
> --
>
> Index: linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_rdac.c
> ===================================================================
> --- linux2.6.26-git3.orig/drivers/scsi/device_handler/scsi_dh_rdac.c
> +++ linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_rdac.c
> @@ -608,12 +608,17 @@ static int rdac_bus_notify(struct notifi
> unsigned long action, void *data)
> {
> struct device *dev = data;
> - struct scsi_device *sdev = to_scsi_device(dev);
> + struct scsi_device *sdev;
> struct scsi_dh_data *scsi_dh_data;
> struct rdac_dh_data *h;
> int i, found = 0;
> unsigned long flags;
>
> + if (!scsi_is_sdev_device(dev))
> + return 0;
> +
> + sdev = to_scsi_device(dev);
> +
> if (action == BUS_NOTIFY_ADD_DEVICE) {
> for (i = 0; rdac_dev_list[i].vendor; i++) {
> if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor,
> Index: linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_emc.c
> ===================================================================
> --- linux2.6.26-git3.orig/drivers/scsi/device_handler/scsi_dh_emc.c
> +++ linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_emc.c
> @@ -416,12 +416,17 @@ static int clariion_bus_notify(struct no
> unsigned long action, void *data)
> {
> struct device *dev = data;
> - struct scsi_device *sdev = to_scsi_device(dev);
> + struct scsi_device *sdev;
> struct scsi_dh_data *scsi_dh_data;
> struct clariion_dh_data *h;
> int i, found = 0;
> unsigned long flags;
>
> + if (!scsi_is_sdev_device(dev))
> + return 0;
> +
> + sdev = to_scsi_device(dev);
> +
> if (action == BUS_NOTIFY_ADD_DEVICE) {
> for (i = 0; clariion_dev_list[i].vendor; i++) {
> if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor,
> Index: linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_hp_sw.c
> ===================================================================
> --- linux2.6.26-git3.orig/drivers/scsi/device_handler/scsi_dh_hp_sw.c
> +++ linux2.6.26-git3/drivers/scsi/device_handler/scsi_dh_hp_sw.c
> @@ -131,11 +131,16 @@ static int hp_sw_bus_notify(struct notif
> unsigned long action, void *data)
> {
> struct device *dev = data;
> - struct scsi_device *sdev = to_scsi_device(dev);
> + struct scsi_device *sdev;
> struct scsi_dh_data *scsi_dh_data;
> int i, found = 0;
> unsigned long flags;
>
> + if (!scsi_is_sdev_device(dev))
> + return 0;
> +
> + sdev = to_scsi_device(dev);
> +
> if (action == BUS_NOTIFY_ADD_DEVICE) {
> for (i = 0; hp_sw_dh_data_list[i].vendor; i++) {
> if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor,
it works. Thanks
YH
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-07-16 19:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-16 17:51 rdac and aac Yinghai Lu
2008-07-16 18:17 ` James Bottomley
2008-07-16 18:46 ` Chandra Seetharaman
2008-07-16 19:52 ` Yinghai Lu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.