All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Cliff Cai <cliff.cai@analog.com>, Bryan Wu <cooloney@kernel.org>
Subject: [PATCH 10/17] ASoC: AD1980 codec: add multi-channel function support
Date: Tue, 18 Nov 2008 12:38:16 +0000	[thread overview]
Message-ID: <1227011903-2825-10-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1227011903-2825-9-git-send-email-broonie@opensource.wolfsonmicro.com>

From: Cliff Cai <cliff.cai@analog.com>

We added multi-channel function to this codec driver and Blackfin ASoC driver as well.
It was tested on Blackfin hardware.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/ad1980.c |   19 +++++++++++++++----
 1 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index 1397b8e..410fed9 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -85,6 +85,9 @@ SOC_DOUBLE("Line HP Swap Switch", AC97_AD_MISC, 10, 5, 1, 0),
 SOC_DOUBLE("Surround Playback Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1),
 SOC_DOUBLE("Surround Playback Switch", AC97_SURROUND_MASTER, 15, 7, 1, 1),
 
+SOC_DOUBLE("Center/LFE Playback Volume", AC97_CENTER_LFE_MASTER, 8, 0, 31, 1),
+SOC_DOUBLE("Center/LFE Playback Switch", AC97_CENTER_LFE_MASTER, 15, 7, 1, 1),
+
 SOC_ENUM("Capture Source", ad1980_cap_src),
 
 SOC_SINGLE("Mic Boost Switch", AC97_MIC, 6, 1, 0),
@@ -145,7 +148,7 @@ struct snd_soc_dai ad1980_dai = {
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 6,
 		.rates = SNDRV_PCM_RATE_48000,
 		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
 	.capture = {
@@ -192,6 +195,7 @@ static int ad1980_soc_probe(struct platform_device *pdev)
 	struct snd_soc_codec *codec;
 	int ret = 0;
 	u16 vendor_id2;
+	u16 ext_status;
 
 	printk(KERN_INFO "AD1980 SoC Audio Codec\n");
 
@@ -253,9 +257,16 @@ static int ad1980_soc_probe(struct platform_device *pdev)
 				"supported\n");
 	}
 
-	ac97_write(codec, AC97_MASTER, 0x0000); /* unmute line out volume */
-	ac97_write(codec, AC97_PCM, 0x0000);	/* unmute PCM out volume */
-	ac97_write(codec, AC97_REC_GAIN, 0x0000);/* unmute record volume */
+	/* unmute captures and playbacks volume */
+	ac97_write(codec, AC97_MASTER, 0x0000);
+	ac97_write(codec, AC97_PCM, 0x0000);
+	ac97_write(codec, AC97_REC_GAIN, 0x0000);
+	ac97_write(codec, AC97_CENTER_LFE_MASTER, 0x0000);
+	ac97_write(codec, AC97_SURROUND_MASTER, 0x0000);
+
+	/*power on LFE/CENTER/Surround DACs*/
+	ext_status = ac97_read(codec, AC97_EXTENDED_STATUS);
+	ac97_write(codec, AC97_EXTENDED_STATUS, ext_status&~0x3800);
 
 	ad1980_add_controls(codec);
 	ret = snd_soc_register_card(socdev);
-- 
1.5.6.5

  reply	other threads:[~2008-11-18 12:38 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-18 12:38 [PATCH 01/17] ASoC: Fix for master playback/capture volume range for TWL4030 codec Mark Brown
2008-11-18 12:38 ` [PATCH 02/17] ASoC: UDA134x codec driver Mark Brown
2008-11-18 12:38   ` [PATCH 03/17] ASoC: Machine driver for for s3c24xx with uda134x Mark Brown
2008-11-18 12:38     ` [PATCH 04/17] ASoC: Allow writes to uncached registers in WM8990 Mark Brown
2008-11-18 12:38       ` [PATCH 05/17] ASoC: Enable WM8990 ADC clocking workaround Mark Brown
2008-11-18 12:38         ` [PATCH 06/17] ASoC: Manage VMID mode for WM8990 Mark Brown
2008-11-18 12:38           ` [PATCH 07/17] ASoC: Build tlv320aic23 cleanly Mark Brown
2008-11-18 12:38             ` [PATCH 08/17] ASoC: DaVinci: Fix audio stall when doing full duplex Mark Brown
2008-11-18 12:38               ` [PATCH 09/17] ASoC: Blackfin: updates Kconfig for SPORT Mark Brown
2008-11-18 12:38                 ` Mark Brown [this message]
2008-11-18 12:38                   ` [PATCH 11/17] ASoC: Blackfin: add multi-channel function support Mark Brown
2008-11-18 12:38                     ` [PATCH 12/17] ASoC: Blackfin: Fix AD1980/1 build with MMAP support disabled Mark Brown
2008-11-18 12:38                       ` [PATCH 13/17] ASoC: Fix Blackfin AC97 DAI probe function return code Mark Brown
2008-11-18 12:38                         ` [PATCH 14/17] ASoC: Blackfin: do not force TWI bus for ssm2602 codec Mark Brown
2008-11-18 12:38                           ` [PATCH 15/17] ASoC: Blackfin: Simplify the MMAP_SUPPORT macros protected code Mark Brown
2008-11-18 12:38                             ` [PATCH 16/17] ASoC: Blackfin: always set a default value for that GPIO range Mark Brown
2008-11-18 12:38                               ` [PATCH 17/17] ASoC: Move uda134x_codec.h to uda134x.h Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1227011903-2825-10-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=cliff.cai@analog.com \
    --cc=cooloney@kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.